Repairs to Fencing, Garbage Bins, Area Drains, Path way and hardstanding etc In Sector B at Mil Stn Patiala under GE (South) Patiala

Amount

Demolition of Brick work including all quoains and arches, pillars etc built in cement mortar complete all as specified and directed.

Brick work using sub class B old size bricks built in cement mortar 1:6 straight or curved on plan exceeding 6 m mean radius complete all as specified and as directed.

Brick work using sub class B old size bricks built in cement mortar 1:4 straight or curved on plan to any radius (as in half brick thick walls etc.) complete all as specified and as directed.

Flush pointing to brick work as in darins etc., in cement mortar (1:4) complete all as specified.

Extra for forming fair finish to drain or channel 30 cm inner girth in cement concrete using extra cement including forms moulds/mitred stopped ends etc. complete all as specified.

Cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in copings, kerbs, bed plates etc., with slightly rounded or chamferred angles & throating as directed

Taking down cement plaster from brick walls of any description, racking out joints, hacking for key, scrubbing down with water etc complete all as specified.

Rendering 15mm thick cement plaster in CM 1:4 on brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified.

Preparing new or previously untreated plastered surfaces and M&L for priming with alkali resistant priming paint and applying two coats of cement base paint on new plastered surfaces of walls etc. complete all as specified.

Excavation in trenches in soft / loose soil not exceeding 1.50m wide and not exc 1.50m in depth incl getting out and taking out sludge from drains etc manually complete all as specified

Removing excavated material (soils & sludge) to a distance exc 250m but not exc 500m and deposited at a level not exc 1.50m high from base complete

PCC (1:3:6) type C-1 using 20 mm graded stone aggregate as in surface channels & drain complete all as directed.

Dismantling of cement concrete tiles/ paver blocks of any description as in floorings, paths etc., laid dry, laid flat seggregating serviceable paver blocks for Re-use complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed

Sand filling under floors / tiles/ paths or in foundations incl watering and well ramming complete

75mm thick Cement concrete 1:4:8 type D-2 using 40 mm stone aggregate as in foundations, fillings and mass concrete or sub base under floors complete

Machine pressed Precast interlocking tiles/ paver blocks 60mm thick any shape and size conforming to IS-15658-2006 M-35 Grade with grey cement and pigments complete all as specified.

Description all as per serial item No 18 here-in-before but except tiles/ paver blocks i.e., using old serviceable tiles/ paver blocks retrieved from item No 13 here-in-before complete all as specified

M&L for 10mm coloured paver tiles (endeura Tiles) of size 300 x 300mm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20mm thick screed bed in CM 1:4 complete all as specified and directed.

Cement concrete 75mm thick 1:2:4 type C-1 using 20mm graded crushed stone aggregate as in floors pavings etc finished even and smooth without using extra cement complete all as specified and directed.

S&F Chainlink fencing 4 mm dia galvanised steel wire 150X100 mm mesh made up into mattresses or cages, lapped wired and laid in postion including closing after filling complete all as specified.

Excavating in post holes (or similar holes) in soft / loose soil each not exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, removing surplus soil to a distance not exc 50 m and making good surface complete

Demolition posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion (posts embedded in natural ground or hard core) and making good disturbed ground complete

Cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified and directed.

Mild steel work as in posts and struts in fencing and ladder/ stair including cutting tops to shape as directed, drilling holes, notching for wire, etc.; incl flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work erected and fixed in position or embedding in PCC complete conforming to Fe-290 Gde E-165 all as specified and as directed.

Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete

Demolition old plain/ barbed wire as in fencing of any description and in any position any dia complete all as specified and as directed.

Plain mild steel wire 4mm dia, galvanised class 3, in fencing including straining and fixing to wood, concrete or steel posts and/or to straining bolts, including securing with and provision of galvanised iron tying wire, galvanised iron staples or steel pins, etc. as directed (each line of wire to be measured)

Preparing ends of steel posts as in fencing and treated with coal tar or coal tar black paint area tarred exc 0.10 Sqm but not exc 0.50 Sqm each M&L complete.

Preparing new or previously untreated surfaces of steel and iron work of any description not otherwise described over 10cm width or girth and M&L for applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified

Demolition chain link fencing wire mesh any type.

Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washer and one hexagonal or square nut, 5 to 10mm diameter of neck, not exceeding 5cm long complete all as specified and as directed.

MS round bars 10mm dia line wire for fixing of chain link fencing, cut to length, bent to shape required, including cranking, bending and binding, complete all as specified and as directed.`

Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)

NORTON BUILDER

Arneja Builders

m/s panchmukhi builders

M/S Mukesh Kumar Gupta

AR CONSTRUCTIONS

Buttar Construction Co.

HARJIT CONTRACTS