PROVN OF HYGIENE AND ODOUR CONTROL EXHAUST FANS FOR WASHROOM OF ADC R AND R AT BLDG NO P-105 AND ORTHODONTICS BLDG AND PROVN OF AIR PURIFICATION SYSTEM FOR CASSETTE ACs AT ADC (R AND R) AT BLDG NO P-133 UNDER GE (E/M) R AND R HOSPITAL DELHI CANTT-10

Supply, installation, testing and commissioning of wall mounted Hygiene & Odor Control unit which is advance oxidation with nanoX & plasmOX based system. Advance oxidation plasma using unique wave-length photon special metal catalyst layer with the capability to generate Hydroxyl to eliminate contamination in the conditioned space. The system shall have an independent centrifugal fan and on/ off switch. The equipment shall be enclosed in PU coated material for durability and better aesthetics. The units should be designed after undertaking a load factor calculation for each specific area where the equipment is to be installed. The load shall clearly state the number of units required.  The system shall be capable of eleminating bad odors, VoC's as well as bacteria, virus, spores and particulates matter. Contaminated Air will be Sucked from one Side and Decontaminated Air will come out from other side. The equipment shall have to GreenPro,CE,ISO 13485,TUV,ROHS with 2014/35/EU Low voltage directive along with FDA compliance certifications. The system shall have a microbiological testing report against Bacteriophage (MS-2 FDA) surrogate SARS Cov-2 with a minimum efficiency of 99 percent along with a Virology report from CCMB lab with a minimum efficiency of 99 percent against SARS Cov-2 within 45 minutes. The unit should have AOP cells with inbuilt fan to be to take care off in respect of air borne contamination (VOC, Odors as well as bacteria, virus, spores) and ionizers to take care of particulates,Single Skin SS unit with PU coated,The units shall be placed over the wall as having pores for air suction & discharge,Air Flow Direction:Towards Lamp,Power Consumption:35 Watts.Performance:

The AOP cell technology features a UV lamp and rare metallic target that combine to generate nature’s friendly oxidizers like ionized hydroxyls, hydrogen peroxide to take care of Odor, VOC and ionizers to take care of particulates .Certification -The equipment shall conform to TUV, CE, ISO, GreenPro, ROHS & FDA. To be submitted along with submittal Make:- Ultrapure, Eflow, Aqua Air, Riania Air solution

M&L for 1.5 sqmm 3 core/independent copper wire minium 6 mtr wiring along with modular type box with 5 Amp switch socket complete all as specified and directed by Eng-in-charge Note:Casing Capping required deemed to be included in quoted rate

Supply, installation, testing, commissioning, for Advanced Oxidation Plasma technology (AOP) cell air purifier for Cassette unit 2 TR comprising of nanoX chamber(254 nm) with a coating of 5 metal i.e TiO2,gold,silver,copper,and palladium along with EPA approved antimicribial coating.The AOP cell to be placed in the supply air stream of the cssette unit to eliminate air bone contamination along with particulate matter.The nanoX chamber shall be tested to ISO 15714:2019 and validated by CSIR.The nanoX chamber shall produce only Germicidal UV.The advanced oxidation Plasma technology (AOP) cell air purifier shall be capable of removing Particulate matter,gaseous contamination as well as microbial contamination using the nanoX and plasma X technology that is without the use of any filters.The product shall be certified by indian /foreign lab for the following parameter PM 2.5, PM 10, Co2, Co, TVOC, Formaldehyde,sulphur dioxide,nitogen dioxide,ammonia,,ozone,total plate count,yeast,and mold along with efficacy report & test report for the same is need to be provided.The equipment shall be certified by Green Pro,TUV,CE ISO 9001:2015,ROHS with 2014/35/EU Low voltage directive along with FDA compliance certifications.The technology cell shall be microbiological testing reportagainst bacteriophage (MS-2FDA) surrogate SARS Cov-2 with a minimum efficiency of 99 percent along with virology report from ICMR approved lab with a minimum efficiency of 99 percent against SARS COV2 within 45 minutes and H1N1 testing kills the virus greater than 99 percent within 30 minutes.The technology shall be tested by ICMR/IIT on human alveolar basal epithellal cells stating that there is no change in the structure and prove that its is safe for human .

The advanced oxidation Plasma technology (AOP) cell should not produce ozone, the certification for the same shall be attached.Lamp life:16000 hours,power consumption 21 watt,housing material should be aluminium complete all as specified. Note:The unit should be complete with transformers,control cable, plug top,switch modular box if required and necessary power cable.The power/control cabling of the unit shall be interlinked with cassette ACs.The Contractor make sure while execution of work any loss/fault/damaged occurs to Caseette ACs contractor have to replaced or make good.Any extra cable/wire required for connection deemed in quoted rate The Contractor must submit the OEM authorization letter duly signed Make:Ultrapure, Eflow, Aqua Air, Riania Air solution

Supply, installation, testing, commissioning, for Advanced Oxidation Plasma technology (AOP) cell air purifier for ductable AC 12 TR unit comprising of nanoX chamber(254 nm) with a coating of 5 metal i.e TiO2,gold,silver,copper,and palladium along with EPA approved antimicribial coating.The AOP cell to be placed in the supply air stream of the unit to eliminate air bone contamination along with particulate matter.The nanoX chamber shall be tested to ISO 15714:2019 and validated by CSIR.The nanoX chamber shall produce only Germicidal UV.The advanced oxidation Plasma technology (AOP) cell air purifier shall be capable of removing Particulate matter,gaseous contamination as well as microbial contamination using the nanoX and plasma X technology that is without the use of any filters.The product shall be certified by indian /foreign lab for the following parameter PM 2.5, PM 10, Co2, Co, TVOC, formaldehyde,sulphur dioxide,nitogen dioxide,ammonia,,ozone,total plate count,yeast,and mold along with efficacy report & test report for the same is need to be provided.The equipment shall be certified by Green Pro,TUV,CE ISO 9001:2015,ROHS with 2014/35/EU Low voltage directive along with FDA compliance certifications.The technology cell shall be microbiological testing reportagainst bacteriophage (MS-2FDA) surrogate SARS Cov-2 with a minimum efficiency of 99 percent along with virology report from ICMR approved lab with a minimum efficiency of 99 percent against SARS COV2 within 45 minutes and H1N1 testing kills the virus greater than 99 percent within 30 minutes.The technology shall be tested by ICMR/IIT on human alveolar basal epithellal cells stating that there is no change in the structure and prove that its is safe for human .

The advanced oxidation Plasma technology (AOP) cell should not produce ozone, the certification for the same shall be attached.Lamp life:16000 hours,power consumption 21 watt,housing material should be aluminium complete all as specified. Note:The unit should be complete with transformers,control cable, plug top,switch, modular box and necessary power cable.The power/control cabling of the unit shall be interlinked with ductable AC 12 TR.The Contractor make sure while execution of work any loss/fault/damaged occurs to ACs contractor have to replaced or make good.Any extra cable/wire required for connection deemed in quoted rate The Contractor must submit the OEM authorization letter duly signed Make:Ultrapure, Eflow, Aqua Air, Riania Air solution

Supply installation testing and commisioning of ceiling/wall suspended type air purifier unit for toilets comprising of active oxygen cell, UV and photo catalyst and to reduce the odor, VOCs. It consists of a photocatalytic cell made of a honeycomb structured hydrated catalyst exposed to UV-Clight combined . The technology produces friendly ionoplasmatic oxidizers including peroxide, superoxide,ozonide and hydroxide ions,and a family of highly reactive oxygen species in a state of charged atoms and molecules. It should have a minimum life of 18000 working hours. PHIO (Photo Hydro Ionized Oxidation) technology can be applied to reduce air pollutants such as VOCs, bacteria, virus, mold, spores, odor, particulates PM 2.5, e-smog. All recognized component should conform to UL Std. 867 certified to CSA standard C22.2 No. 187 . A test certificate from an internationally accredited lab EMSL must be provided about the performance of the technology on E.Coli kill rate in air for toilets for odour control Note:Electric connection along with switch socket and modular box with plate deemed in quoted rate Make:Magneto,Ultrapure,Eflow,Aqua Air,Riania Air solution

M&L for point wiring complete One 3 pin socket outlet, 5 amps, independent, with cables 1.5 sq mm size complete all as specified and directed. Note:Casing Capping required deemed to be included in quoted rate