REPAIR TO FLOOR, WALL, CEILING, PLASTER, SUNKEN, JOINERY, PLUMBING AND SANITARY WORK ETC OF ZONE A AND B AT LGJ MIL STN

Taking down cement plaster on bricks or stone walls etc and including raking out joints, hacking for key scrubbing down with water etc complete all as specified & directed by Engr-in-charge.

M&L for rendering 15 mm thick on fair faces of brick or stone masonary in CM (1:6) finished even and smooth without using extra cement including M&L for preparation by suraface with help of mechanicallly and applying 1.5 to 2.5 mm thick acrylic wall care putty and smoothening the surfaces with sand paper/mechanised sanding etc (preparatary paint as directed), and applying two coat of 100% premium intetrior acrylic emulsion paint by using brush roller over and including one coat of primer complete all as specified & directed by Engr-in-charge.

M&L for rendering 15 mm thick on fair faces of brick or stone masonary in CM (1:4) finished even and smooth without using extra cement etc upto height 9.60 m including M&L for applying two coat of weather proof exterior emulsion paint (shade as approved by GE) with highlighter of any approved shade, @ 5 sq.m/litre/2 coats by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/ cantilevers/balcony etc surfaces over wall care putty (thickness very from 1.5 to 2.5 mm as required for desirable smoothness and levelling of surfaces in two or more layers) on newly plastered surfaces of wall including preparation of surface complete all as specified & directed by Engr-in-charge.

M&L for rendering 5 mm thick in cement mortar (1:3) on fair faces of concrete surfaces of ceiling finished fair and even and smooth without using extra cement including M&L for applying three coats of white wash on new plastered surface as on ceiling incl preparation etcetc complete all as specified & directed by Engr-in-charge.

M&L for complete removal of existing treament with help of mechanicallly and applying 1.5 to 2.5 mm thick acrylic wall care putty and smoothening the surfaces with sand paper/mechanised sanding etc (preparatary paint as directed), and applying two coat of premium intetrior acrylic emulsion paint by using brush roller complete all as specified & directed by Engr-in-charge.

M&L for complete removal of existing surface finishes and treating with two coat of weather proof exterior emulsion paint (shade as approved by GE) with highlighter of any approved shade, @ 5 sq.m/litre/2 coats by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/ cantilevers/balcony etc surfaces over wall care putty (thickness very from 1.5 to 2.5 mm as required for desirable smoothness and levelling of surfaces in two or more layers) on old plastered surfaces of wall including preparation of surface complete all as specified & directed by Engr-in-charge.

M&L for preparation of old plastered surfaces and appying two coats of white wash on ceiling complete all as specified & directed by Engr-in-charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing servicable tiles to store and rubbish off the premises complete all as specified & directed by Engr-in-charge.

M&L for joint free Non- skid coloured ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. Set & jointed in neat cement slurry & jointed in coloured cement to match the colour of tiles over & including 15 mm thick screed bed in cm 1:4 and pointed in epoxy grout to match in floor complete all as specified & directed by Engr-in-charge.

All as per Item no 09 here in before, on vertical surfaces such as skirtings ,set & jointed in neat and pointed in epoxy grout to match the floor tiles, over & including 10 mm thick screed in cement mortar (1:4) complete all as specified & directed by Engr-in-charge.