Construction of New Academic Block (G plus 3) with Future Extension of One Floor at Lakshmi Bai College, Ashok Vihar, Delhi (Civil and Electrical) Composite work. (SH- Providing and Placing, Installation of Sitting Arrangement for Science Lab,

Amount

Laboratory WorkBench - Understructure Providing and fixing Laboratory Tables Understruture consists of C-Frames Assembly, Horizontal members with Grantie Top, Back Panels and Cover Panels. These understructures shall be of 750/900mm Height as per site requirement or as per the Direction of Engineer-in-Charge. The measurement of understructure will be done from Top Surface Area.

C-Frame Assembly All C-Frames assemblies should be manufactured from standard hollow metal sections; confirming to I.S. Code 7138:1973 (Indian Standard specification for steel tubes for furniture) and all sheet metal components should be of CRCA confirming to IS Code 513:1994.The suspended under-bench welded units should be supported on heavy-duty steel frames fully carrying the load of worktops. Its superior strength combined with aesthetically appealing end caps shall give maximum flexibility and modularity while making a layout. C-frame should be constructed from a rectangular pipe with a cross section of 60mm x 30mm and should be 2 mm thick and should be without a vertical front leg to give a clean look. This shall provide more knee space or leg space and would facilitate uninterrupted lateral movement of the under-bench units within the bench run. The C-frame legs should be supplied with adjustable feet (tolerance from -5mm to +20mm) to correct the unevenness of flooring. The tubular enclosed type construction shall discourage dust accumulation and unwanted development of bacteria & fungus. Drainage gradient should be well adjusted throughout the length of table and should have horizontal supports for drainage systems. The structure should have a removable back panel to provide access for maintenance throughout the length of table. The C-frame shall also have skirting at back bottom side. It should be suitable for sitting and standing nominal heights of 750mm & 900mm respectively. The table depths should be 750 mm for wall side and 1500mm for Center/Island tables. The Corner Units shall fit well with 750mm table depths. All frame-work is should be pre-treated with superior pure epoxy powder coated finish.

Horizontal Members These should be made from rectangular pipes of 2mm thickness. Cross-sectional dimensions of the pipe should be 60mm x 30mm x 2mm Thick. They should be made of CRCA MS and coated with pure epoxy powder. These connect two C-Frames together as shown using C-clamps/U-clamps. Together with the C-Frames and Horizontal Members connected together, the skeletal structure of the work-bench is formed on which the worktop can be placed and the hanging-type storage cabinets can be suspended. Horizontal Members determine the width of the lab workbench as they form the member (distance) between two adjacent C-Frames. They should be available in various widths of 600, 750, 900, 1050, 1200, 1350, 1500, 1650, and 1800 as per site requirement.

Removable Back Panels These cover panels cover the service lines that run behind Storages. These should be easily removable (unclipped) and the service line be accessed for maintenance. This allows the equipment on workbench to remain undisturbed They should be made of CRCA MS with pure epoxy powder coating and are of 1mm thickness

Cover Panels All side cover panels and back panels, filler panels should be made from CRCA MS panels of 1.0mm thickness with pure epoxy powder coating

Work Top The complete structure shall be provided with a Worktop made of 20mm (+/- 2mm) thick Jet Black Granite. The exposed edges of the worktop should be chamfered and smoothened. The bottom of the worktop should be polished and there should be a Vgroove throughout the length of the exposed edges to protect the cabinets from coming in contact with the spillages. The overhang on the storage cabinet is 25 mm at the front side and 30 mm at the sides. The backing material used is a neoprene mat of 6 mm thickness. A representation the worktop edges is shown

Laboratory WorkBench - Storage Units Providing and fixing Work bench Storage cabinets. The Storage Cabinets should be of 2 Shutters + 1 Drawer. Material of Construction shall be MS CRCA Steel as per IS:513 (1994), Thickness: LH/RH side panels, shutter front, Bottom panel, Top front, Drawer separator, shelf, Alignment channel should be of 1.2mm thk. Removable Back panel, Shutter cover, Fr. Rack strip, Top cover panel should be of 0.8mmthk. Finish: Powder coating pure epoxy, thickness 40-50 microns. Handle: Anodized Aluminum Recessed-Type, CTC: 160.0mm. Lock: Units have a locking facility with 180° and 10 lever cam lock mechanism (except for sink and corner unit). Hinge: Knuckle-butt type SS Hinge. Screw: SS304. Shutter should be of twin-type construction with sound dampening effect using profeel. Shutter cover should be equipped with Bump on for sound dampening. Ball Slide: 500mm Length (required only for drawer unit). Shutter should have provision of roller catch.All the above items should be as per photo, sketch specifications & direction of engineer-in-charge.

Storage unit of Size 600mm(W) x 530mm(D) x 480mm(H) with 1 Drawer and 2 Shutters

Storage unit of Size 600mm(W) x 530mm(D) x 480mm(H) with 2 Shutters

Storage unit of Size 750mm(W) x 530mm(D) x 480mm(H) with 2 Shutters

Storage unit of Size 450mm(W) x 530mm(D) x 480mm(H) with 1 Drawer and 1 Shutters

Laboratory WorkBench - Sink Unit Providing and fixing Sink Units of size 750mm(W) which comprises of Sink Cabinet, Polypropylene Sink Unit and 1-Way Goose Neck 360 Degree revolving Faucet.

Sink Cabinet Providing and fixing Work bench Sink cabinets. The Sink Cabinets should have 2 Shutters. Material of Construction shall be MS CRCA Steel as per IS:513 (1994), Thickness: LH/RH side panels, shutter front, Bottom panel, Top front, Drawer separator, shelf, Alignment channel should be of 1.2mm thk. Removable Back panel, Shutter cover, Fr. Rack strip, Top cover panel should be of 0.8mmthk. Finish: Powder coating pure epoxy, thickness 40-50 microns. Handle: Anodized Aluminum Recessed-Type, CTC: 160.0mm. Hinge: Knuckle-butt type SS Hinge. Screw: SS304. Shutter should be of twintype construction with sound dampening effect using profeel. Shutter cover should be equipped with Bump on for sound dampening. Ball Slide: 500mm Length (required only for drawer unit). Shutter should have provision of roller catch. All the above items should be as per photo, sketch specifications & direction of engineerin-charge.

Polypropylene Sink Assembly Providing and fixing Polypropylene Sink with PP Waste, Anti-Siphon Bottle Trap & Flexible Drainage Pipe. Sink bowl shall be Polypropylene Molded made up of 5mm thick high density and elastic poly propylene with good resistance to organic solvents. Standard bowl size is 500mm(L) x 400mm(W) x 300mm(D).

1 Way Water Faucet Providing and fixing 1-Way 360 Degree Revolving Water Faucet. Faucet fittings should be laboratory grade. Water faucet and valve bodies should be cast red brass alloy or bronze forgings, all fittings should be powder plated. Brass as per IS:319, Pipe as per : IS:407,O utlet nipple in PP construction. PP knob to be used. All gasket and O-ring of Nitrile Rubber make. Inlet connection 1/2" BSP. Gooseneck spout with 360 degree rotation with 500000 life cycles. Pneumatic test at 250 psi, hydraulic test at 125 psi, bursting test at 500 psi. Coating to be glossy epoxy fusion bond

Laboratory Pegboards Providing and fixing SS Pegboards. These should be Single faced high grade stainless steel pegboard having a tray hole for water drainage and detachable pegs. The essence should be made up of I mm thick stainless steel (SS 304) whereas the pegs should be made up of polypropylene and should be adjustable with a minimum 10mm distance between each peg All the above items should be as per photo, sketch specifications & direction of engineer-in-charge.

Laboratory Tables - Reagent Racks Providing and fixing 2 Tier Reagent Racks of size 1100mm(L) x 300mm(W) x 680mm(H). It should be complete modular design consisting of 2 stage horizontal storage shelves made of minimum 1.2 mm thick frame. Shelf : Fixed-Type reagent shelves have 1.2mm thickness consisting of 2 stage horizontal storage shelves made of minimum 1.2 mm thick frame. CRCA MS with pure epoxy powder coating and having cutouts for electrical switches and sockets. It should have provision for placing Granite pieces. Cutout for 3 module plate to be provided. All the members are knock down and can be restructured.The the metal part cutout should be of 0.8mm thickness.The finish should be pure epoxy coating of 50micron thickness.Load carrying capacity of 70kg for Island table. All the above items should be as per photo, sketch specifications & direction of engineer-in-charge.

Work Tables - Electrical Trunking Providing and fixing Bench Mounted Electrical Trunking. Electrical Trunking body cover shall be of minimum 1.2mm thickness. Used for housing electrical switches and sockets, data and voice points, its top panel, bottom panel of the trunking should be made from minimum of 0.8mm thick body.Bottom plate below trunking to avoid leakage made of 6mm thickness PP sheet It should be available in both, single sided and double sided configurations. It should be made from CRCA MS with pure epoxy powder coating with minimum 50 microns tickness . The front surface that houses the electrical points should have a slope. Size of each unit shall be 1200 mm W x 75 mm D x 75 mm H. Each Electrical Trunking is provided with 2 Nos of 6 Module Electrical Plate with Switch Sockets. All the above items shall be as per photo, sketch specifications & direction of engineer-in-charge.

Work Tables - Gas Valves Providing and fixing laboratory grade 2 Way LPG Gas Valve made from high quality brass forging grade as per IS 8737 2007 and machining grade as per IS:319 to avoid porosity and leakage. Taps are powder coated with glossy epoxy fusion bond. Pneumatic test at 250psi, hydraulic test at 125 psi, bursting test at 500psi. Valves should be identified with service indexes in the color coding as per DIN 12920. All the above items should be as per photo, sketch specifications & direction of engineer-in-charge.

Chemical Storage Cabinets Providing and placing of Storage cabinets of size 1000mm(L) x 485mm(D) x 1500mm(H). Storages are designed to safely store highly corrosive acids. With a full PP construction, the Resilience cabinets are completely protected from corrosion, making them the preferred choice in labs and workspaces dealing with aggressive chemicals. All safety claims of this product are backed by third party certification for Chemical Spot Test for 49 chemicals listed in SEFA standards and used across various industries. The cabinet has been designed to be fully ventilated ensuring air circulation and preventing a build-up of dangerous fumes within the cabinet. The shelves comprise of removable height adjustable collection trays that are leak-proof, enhancing the safety factor of the storage units. Exhaust Provision : There is an air-duct at the back, inside the cabinet that effectively extracts fumes when connected to exhaust. Louvers are provided on the front doors to allow inward Low of fresh air. Zero-Corrosion : Full Polypropylene Body, with no expose d metal hardware, ensures there is no corrosion. Closing mechanism : The cabinet has a latch to ensure proper shutting of the doors. Removable & Height- Adjustable PP Trays as Shelves : the PP Collection Trays can be removed easily, and can be height-adjusted as required. Load Bearing Capacity & Spill Containment: Each shelf can take up to 30 kgs (approx) of uniformly distributed load. The shelves are leak-proof and fully contain accidental spillages. Locking Provision : The door has provision for using a padlock to safeguard the contents of the cabinet.

Anti-Vibration Table Providing and Placing of Anti-Vibration Table of size 900mm (L) x 600mm (D) x 750mm (H). The table shall be made of modular type Tubular frame, which carries the load of granite ,kept on it.High-tension Pan head M6 Zinc black-coate dscrews (for better corrosion resistance )are used for the fastening. The material use dis: 40 Sq x 1.6 mm thick ERW tube and the overal lload carrying capacity of tubular frameis 200 kgs of uniform distributed load. CoverPanels–They are0.8 mm thick CRCAMS sheet and pre-treated and epoxy powder coated for better corrosion resistance. The thickness of powder coatis 45-50 microns which passes the test of Salt Spray for 1000 Hour sand having the Scratch Hardness of 3 Kgs. Work Surface – Black Granite Vibration Isolating Rubber pads-The objective of using these rubber pads is to absorb the pulsating vibrations coming from the floor.The padsaremade up from combination of nitriterubber, corkparticles and cross linked polyester fiber.This high-grade compound material possesses all the physical and mechanical proper ties required to minimize the dampening effect. Levelling screws-TheTubular frame has the provision for 4 height adjusters or Levelling Screws that take care of all levelling aspects.

Instrument Storage Cabinets Providing and placing of Storage cabinets are designed to safely store equipments, consumables, files and any non chemical (powder based) components. The cabinet can be provided with a ventilation system to enable exhaust of localized fumes emanating from the store. The storage unit shall be of size 900mm(W) x 485mm(D) x 1800mm(H) made up of 1.2mm thick CRCA MS Sheet duly Epoxy powder caoted to a thickness of 50+/-10microns. The storage unit shall be provided with 2Nos Hinge Door Shutters fitted with a float glass to enable visibility inside the cabinet. The Storage unit shall be provided with louvers/perforations for air supply. The Storage unit shall be provided with minimum 4Nos height adjustable shelves making it 5 compartments for storage.

Wall Mounted Storages Providing and Fixing welded Over Head Storage Cabinets of size 600mm(L) x 625mm(H). Material of construction shall be MS CRCA Steel as per IS:513 (1994), Thickness: LH/RH side panels, shutter front, Bottom panel, Top front, shelf, alignment channel should be of 1.2mm thick. Removable Back panel, Shutter cover, Fr. Rack strip, Top cover panel should be of 0.8mm thick. Finish: Powder coating pure epoxy, thickness 40-50 microns. Handle: Anodized Aluminum Recessed-Type, CTC: 160.0mm. Lock: Units have a locking facility with 180° and 10 lever cam lock mechanism. The height of these cabinets should be around 625mm while the depth should be around 325mm. The shutters should be provided with metal frame with inserted glass. There should be one height-adjustable shelf inside each cabinet. Hinge: Knuckle-butt type SS Hinge. Screw: SS304. All the above items should be as per photo, sketch specifications & direction of engineer-in-charge.

Workstations Type I Providing and placing of panel & tile based modular workstations for Faculty of having 1200mm Partition Height and 750mm(Work Top Height) with partition thickness of 52 mm including powder coated aluminium trims and supported on Legs for better air circulation and helps in keeping floor clean. All the dimensions will be as per the Original Manufacturer's Specifications. Company Certificates : AIOTA, ISO 9001:2015, ISO 14001:2015 and ISO 45001:2018. Product Certificates : Greenguard (UL), IAQ Gold, GRIHA & SVAGRIHA, BIFMA Level 2 and Greenpro.

Panels Construction - There shall be two types of panel: Main panel & side panel each of thickness 52 mm and 23 mm respectively. Each panel shall have four horizontal divisions. Each panel consists of 2Nos of Vertical extrusions and Horizontal extrusions made of 1.2mm thick aluminium duly powder coated to the thickness of 40-50 microns at every division of tile/block. Each panel shall have section at bottom which comprises of L shape channels made of minimum 2mm thick CRCA steel , formed plates of 3mm thick HR steel & ERW steel tube of minimum size 34x15x1.6mm thick welded together. The complete frame at bottom shall be powder coated with 40-50 microns thickness The Bottom Frame is bolted with the Upright verticals. Each Panel is provided with minimum 2Nos of Legs of height as per manufacturer which are fixed at the bottom frame of the panel. Legs are fabricated by MS Tube of section 35mm x 25mm with the MS base plate of 35x22x5mm , below which an Leveler is fitted which allows for adjustment of the height by 50mm. It will be coated with 40-50 micron thickness of epoxy powder coating. Each panel shall have four horizontal divisions of equal height as under:(A) The top division of side panel shall be single fabric magnetic tiles on both sides. The upper division in one main panel shall have combination of two tiles consisting of glass writing tiles & fabric tackable tiles .The upper division in another main panel shall have fabric tackable tiles as per photograph. These tiles shall be slide in to the panels from top before fixing the top horizontal. (B)The middle two divisions of main & side panels shall have 2Nos 50 mm thick blocks consisting of minimum 38mm thick Paper Honeycomb or equivalent with minimum 2.75 mm MDF on each sides and minimum 0.6mm laminate on both sides.(C) The bottom division in main panel & side panel shall have single metal tiles both sides.The tiles shall be supported from top & bottom side with clips made from PP co polymer fitted in horizontal extrusion. These bottom tiles shall be press fitted on to the assembly frame of the panel with the help of snap on clips made of nylon-66 and support clips made from PP polymer. Note:all provisions shall be made for forming conduits for passing cables as well as Cutting in panels tiles for electricals points inculding switchs and socket shall be done as site requirments and the cost for which is considered in this item only.

Tile Finishes :• FABRIC MAGNETIC TILES: Fabric magnetic tiles shall be fabric upholstered metal tiles in minimum 0.5 mm thick G.I. Grade O . The fabrics shall be upholstered with adhesives.• FABRIC TACKABLE TILES: Fabric tackable tiles shall be upholstered metal tiles in min 0.5mm thick G.I. grade O , with P.E. foam in the tile for tackablity. The fabric shall be upholstered with adhesives. Fabric shall be of min gsm 250-300.• GLASS WRITING BOARD TILES : Glass tiles shall be made of min 4.0mm thick toughened plain glass with diamond polish edge finish with white paint on oneside to make it a writable glass.• METAL TILES : Plain metal tiles are made of min 0.8mm Thick MS CRCA Grade D and powder coated with Epoxy Polyester Finish of thickness 40-50 microns.The colors for laminate, fabric, metal powder coatings and glass shall be as approved by engineer-in-charge.

Aluminium Trims : The top trims and end trims for 50.0mm shall be made from aluminum extrusion. All kinds of extrusions for 50.0mm shall have average wall thickness of minimum 1.2 mm & having finish of powder coating. Top trim in 50.0mm thick panel shall be press fitted on the horizontal extrusion, it shall be slide fitted with the help of top trim connector made from PP copolymer 3530 grade. End trim for 50.0mm thick panel shall be slide fitted with the help of end trim connector made from minimum 2.0mm thick M.S. CRCA Grade D.

Wire Management - Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks. Wires runs through the system from Bottom/Top tile and extended to the various locations by the help suitable Cable Ducts.Separate cable duct shall be provided for power and networking cables. Additional Cable duct made from minimum 0.8mm thick M.S. CRCA Grade D shall be provided where wires are exposed outside workstation panel. It is constructed with two parts, one is body & another is cover. It holds the cables & gives aesthetic appearance by covering all cables entry, which are moving upward to the panels. Necessary cable duct shall be provided on floor & walls to carry the cables & conduits upto bottom of panel.The color of metal cover for cable duct shall be powder coated matching the color of stone/tile/wall finish.

Worksurface : Worktop shall be made out of 25mm thick prelaminated particle board. All the open edges of work surface shall be provided with machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue. The work surface shall be provided with circular cut out of Dia.65mm as per the requirement, for passing of wires. These cut outs shall be provided with suitable covers. Worksurfaces are fitted to the panels by worksurface brackets which shall be as per manufacturer's specifications. The worktop supported on such brackets shall be able to take load of 90 kg.

Drawer Units with legs: 3 Drawer Unit having flat metal front and top with Central locking. Configuration: Box-Box-File 390mm (W) X 435mm (D) X 646mm (H). Construction & Material of Drawer Unit: Welded Assembled of 0.8 mm thick CRCA for Body Shell, Drawer Front & tray, Front Side Stiffener, Rear Side Stiffener & Bottom, 1.2 mm thick CRCA Top Stiffener & Bottom stiffener. Drawer Fronts & Metal Front Straight Edge. All Drawers with Double extension precision ball slide shall be provided. For Drawer pulling, side wise tapered recess provided in shell behind Drawer Fronts. Locking: 10 lever Cam Lock & Central RH locking with actuator & lock channel mechanism. Top Panel: 0.8 mm thick Metal Straight Edge Top. Castors: Swiveling non-lockable Castors mounted below the body shell. Finish: Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10).

Key Board Pullout Tray : Supplying and Fixing of sliding computer key board tray of 480mm (L) X 280mm (D) X 40mm(H) made out of CRCA steel as per IS : 513 made of 0.9mm thick powder coated with sliding channels and other fixing fittings. It should also have a sliding system for accomodating mouse.

CPU Trolley : Supplying and Fixing of CPU Trolley of Size - 345mm(W) x 226(D) x 180mm(H) is made of 1.0 mm thick MS CRCA Sheet and Side support is made of 0.8 mm thick MS CRCA Sheet. It consists of 4Nos Non-lockable twin wheel castors made of injection moulded in Black Nylon.

Workstation : Size 1200mm (L) x 600mm (D) x 1200mm (H)

Workstations Type II Providing and placing of panel & tile based modular Faculty counter, size : 1500mm (W) x 1500 (D) x 1800 (H) having 52mm panel consisting with - i) 2 nos. of vertical trims made of aluminum extrusions. ii) Horizontal trims made of aluminum extrusions at every division of tile/block. The numbers of these horizontal trims vary as per panel height. iii) Blocks made out of a composite construction of MDF and paper honeycomb. Numbers of these blocks vary as per panel height. iv) 1 no. of fabricated bottom frame as a welded structure of steel components. v) 2 nos. of bottom tiles. vi) 2 nos. of top tiles. vii) 1 no. of top trim made of aluminum extrusions. viii) Connector are aluminum extrusion to construct configuration modules consists of junction like 2 Way 90deg,3 way 90deg, 2 way &3 Way universal post. Drawer Units with legs: 3 Drawer Unit having flat metal front and top with Central locking. Configuration: Box-Box-File 390mm (W) X 435mm (D) X 646mm (H). Construction & Material of Drawer Unit: Welded Assembled of 0.8 mm thick CRCA for Body Shell, Drawer Front & tray, Front Side Stiffener, Rear Side Stiffener & Bottom, 1.2 mm thick CRCA Top Stiffener & Bottom stiffener. Drawer Fronts & Metal Front Straight Edge. All Drawers with Double extension precision ball slide shall be provided. For Drawer pulling, side wise tapered recess provided in shell behind Drawer Fronts. Locking: 10 lever Cam Lock & Central RH locking with actuator & lock channel mechanism. Top Panel: 0.8 mm thick Metal Straight Edge Top. Castors: Swiveling non-lockable Castors mounted below the body shell. Finish: Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10). The Counter shall have a sliding computer key board tray of size 480mm (L) X 280mm (D) X 40mm(H) made out of 0.8 mm CRCA steel powder coated with sliding channels and other fixing fittings.The front face of tray shall match worksurface edge. It should also have a sliding system for accomodating mouse. All the dimensions will be as per the Original Manufacturer's Specifications. The product should be certified with BIFMA Level 3, GRIHA, Greenguard (UL), ISO 9001:2015 and ISO 14001:2015 complete as per approved sample and as per the direction of Engineer-In-charge.

Wall Mounted Storages Providing, supplying and placing Wall Mounted Storage Units with Metal Body and Wooden Shutters of size 600mm(L) x 325mm(D) x 780mm(H). Storage Cabinets to be of complete modular design Consisting of Cabinet Frame, Wooden shutters, shelves and plastic recess handles. Cabinet frame to be of 0.6mm +/- 0.07mm CRCA MS sheet as per IS-513 with Horizontal Stiffners made from 1.2mm +/- 0.09mm thick CRCA as per IS-513. Wooden Shutters are made from 18mm+/-0.5mm thick interior grade PreLaminated Particle Board as per IS-12823. All the edges of the door are duly sealed with 2mm thick PVC Edge Banding. Heightwise 1No CRCA adjustable shelf shall be provided in each storage having a load carrying capacity of 25kg UDL. Hinges to be spring loaded with CED coating with self closing mechanism. The complete M.S. material of cabinet to be pretreated (degreased, Zinc phosphated) and epoxy powder coated for better corrosion resistance. The thickness of powder coat to be 50 +/-10 microns(minimum) as per specification. Each unit should have a locking facility with 10Lever cam lock mechanism. The product should be certified with Greenguard (UL), AIOTA for Education Furniture and company shall posses ISO 9001:2015, ISO 14001:2015 and ISO 45001:2018 complete as per approved sample and as per the direction of Engineer-Incharge.

Round Table Providing and placing of Round tables of size 900mm (Dia) x 725mm (H). The table worktop shall be made up of 25mm thick Pre-Laminated Both with both side lamination. The table shall have knocked down understructure made from 8mm HR plate with levelers and a vertical support tube of diameter 90mm having 2mm thickness duly powder coated to the thickness of 50+/-10 microns. The product should be certified with Greenguard (UL), AIOTA for Education Furniture and company shall posses ISO 9001:2015, ISO 14001:2015 and ISO 45001:2018 complete as per approved sample and as per the direction of Engineer-Incharge.

Providing & placing Visitor Chair w/o Arms.The chair seat is made from 12mm thick hot pressed plywood and back is injection moulded from black Co-polymer Polypropylene upholstered with fabric and moulded Polyurethane foam together with seat and back covers. The back foam of chair is designed with contoured lumbar support for extra comfort .SEAT SIZE: 450 mm (W)X 420 mm (D)and BACK SIZE of Chair : 390 mm (W) X380 mm (H). The seat and back covers are injection moulded in black Co-polymer Polypropylene. The fixed type mechanism is without back tilt. The under structure tubular frame is made up of M.S.E.R.W. tube which is black powder coated. Certification: Thecompany should be ISO9001:2015 , ISO14001:2015, ISO45001:2018, ISO50001:2018, AIOTA,BIFMA & Greenguard(UL) certified and the product shoul dbe complete as per approved sample and as per the direction of Engineer- Incharge.

Supplying and Placing in position Storage Unit. Overall size of the storage unit shall be 900mm (W) x 450mm (D) x 1950mm (H). The construction shall be aesthetically appealing completely knock down construction. Legs shall be fitted with screw type leveler and material shall be made from combination of 0.5 mm & 0.8 mm thick CRCA sheet. The shelving shall be height wise adjustable shelf mounting, each full shelf shall have a load capacity of 40 kg UDL max. and 4 nos. of full adjustable shelves. A4 size box file(85 W x 285 D x 345 H mm) can be stored vertically on all five loading levels. Doors shall be of size 48 W mm x 20 mm Thickess x 1900 H mm. Doors shall be made from combination of 0.5 mm & 0.8 mm thick CRCA sheet. Handles shall be aesthetically appealing and shall be made of aluminium. Locking shall be 3 way locking. Finish shall be epoxy powder coated to the thickness of 50 microns(+/-10). The product should be certified with Greenguard (UL), AIOTA, ISO 9001:2015, ISO 14001:2015 and ISO 45001:2018 complete as per approved sample and as per the direction of Engineer-Incharge. All the above items should be as per specifications & direction of engineer-in-charge.

Providing and placing Chair, The seat and back are made from 1.0+_0.1cm thk. Water resistant flat plywood measured Back Size:420mm (W) X 265mm (H), Seat Size: 420mm (W) X 420mm (D). The HR Polyurethane foam is moulded with density = 45+/-2 kg/m3 and hardness load 16+_ 2 kg IS:7888 for 25% compreesion. The tubular frame is made is made of 2.54+_ 0.03cm X 0.2+_0.016cm M.S. E.R.W. tube and a welded leg tube forming the armrest tube made of 2.54+_0.03cm X 0.2+_ 0.016cm. M.S. E.R.W. tube to form the complete assembly, which is powder coated (DFT 40-60 microns). Certification: The company should be ISO9001:2015, ISO14001:2015, ISO45001:2018, ISO50001:2018, AIOTA, BIFMA & Greenguard(UL) certified and the product should be complete as per approved sample and as per the direction of Engineer- Incharge.

Providing and placing in position of Table .Overall Size:1199 mm W x 590 mm Dx 750 mm H. Work surface: The panels shall be made from 18±0.5 mm thk Pre-laminated Boards as per with 2 mm thick PVC Edge banding on all sides.Under structure:The under structure of the table shall be made from 0.9±0.09 mm thk Sq.25.4±0.3 mm x 1.2±0.096 mm The MSERW tube powder coated 50 microns (±10), Modesty Panel: Shall be made from 1.0±0.09 mm thk powder coated CRCAMS. Certification: The product should be IAQGold, Greenguard (UL)and Green Pro certified and the company should be ISO-9001, 14001,45001 , 50001,BIFMAand AIOTA certified. The item should be as per certifications and specifications as per the direction of engineer-in-charge.

K. K. FURNITURE