Infrastructure Development for Level D Full Flight Simulator FFS for Hindustan 228 Aircraft and its Training Facility at TTI Campus HAL TAD Kanpur

HINDUSTAN AERONAUTICS LIMITED ACCESSORIES COMPLEX TRANSPORT AIRCRAFT DIVISION, KANPUR CIVIL WORKS DEPARTMENT

NAME OF THE WORK: “Development of Infrastructure Facility for Level-D FInfrastructure Development for Level-D Full Flight Simulator (FFS) for Hindustan-228 Aircraft and its Training Facility at TTI Campus, HAL – TAD, Kanpur. ." CONTRACT NO. MW/CIV/995/1/25-26

PRICE BID (Schedule A Bill of Quantity )

Name of the Tenderer:

Sl. No Specification Qty. Unit Rate in Figs [Excluding GST & Welfare cess] Rate in words Amount (In Rs.)

1 The work in general shall be carried out as per CPWD DAR 2023 plus applicable cost index. For item of works not covered in the CPWD DAR shall be governed as per BIS specification or as per Sound Engineering practice or as specified and directed by the EIC.

2 The quoted rates shall be for the net finished work / item inclusive of cost of all necessary materials, machinery, tools and plant in all the operations described in the BOQ at all heights etc. All the required tests shall be carried out by the contractor at their cost in the presence of Engineer-in-Charge or his authorized representative and shall submitt the test results to the EIC. If the test are carried out at an outside laboratory, the cost of such tests, materials, transportation, etc., shall be borne by the Contractor.

3 Contractors shall inspect the site and fully acquaint himself / themselves with the scope and nature of work, access, location and working condition. No claim will be considered later on the ground of ignorance or otherwise of the conditions under which the work will be have to be executed.

4 Contractors will be solely responsible for any accidents to workmen engaged by them during execution of work.

5 The tenderer has to quote percentage above / below against the total amount considering the specified standard rates. If the contractor does not quote any percentage above / below on the total amount, the tender shall be treated as invalid and will not be considered.

6 The quoted percentage for the works mentioned below, shall be taken into consideration for evaluation of the tender. The lowest offer (L-1) will be determined considering the total amount including GST & Welfare cess based on the quoted percentage. HAL shall process the bills of contractor for executed work exclusive of GST & Welfare cess. In addition, payment towards GST & Welfare cess as applicable shall be made to the contractor along with the bills as per Bill Amount. The GST & Welfare cess paid by HAL shall be deposited to the concerned Govt. authority by the contractor regularly. Any other tax (as applicable) as imposed by the Govt. on the contract shall be borne by the contractor.

7 All materials required for the work will be contractors own supply. They shall conform to relevant IS standards and shall be of approved brand /manufacture as specified. If the specified brand/manufacture not available, then only alternative equivalent brand may be produced for approval. However, prior approval of HAL shall be taken before procurement of any material.

8 Any plant and machinery required are contractors own supply. No plant and machinery will be issued by HAL.

9 All the items shall be carried out as per the Specifications and as directed and approved by EIC.

10 Rate shall be inclusive of work at any height / level, lead & lift and staging, scaffolding etc.

11 Name & Address of the firm must be filled in the yellow shaded portion on the top of the page.

12 Vendors are requested to fill the rates in figures only in the yellow shaded portion. Rate in words and amount shall be generated automatically.

BOQ Sl. N. A PART-A (CIVIL WORK)

1 1 Surface dressing of the ground including removing vegetation and in- equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kinds of soil, all complete as per direction of EIC. 5366.51 Sq.Mt. 30.13 Rupees Thirty and Thirteen Paise 161692.95

2 2 Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material. Beyond 30 cm girth up to and including 60 cm girth, all complete as per direction of EIC. 2.00 Each 469.72 Rupees Four Hundred Sixty Nine and Seventy Two Paise 939.44

3 3 Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material. Beyond 60 cm girth up to and including 120 cm girth, all complete as per direction of EIC. 4.00 Each 2094.27 Rupees Two Thousand Ninety Four and Twenty Seven Paise 8377.08

4 4 Transplantation of trees with in a distance of 2km including excavation around existing tree, pruning of branches, lifting, loading and transportation of existing tree, digging pits for placing tree at new place, adding manure, sand, fertilizer, hormones and bio fertilizer to it. Levelled and neatly dressed and disposal of surplus materials from old existing and new sites to designated place. Each tree should be firmly secured to the stake so as to prevent excessive movement, flooding with water, treatment of roots, rope and gunny bags as per direction of the officer incharge. T&P and all required materials shall be arranged by the contractor and nothing extra shall be paid on this account. (a) Girth of tree shall be measured at a height of 1m above ground level. Girth of trees beyond 90cm and upto 150cm, all complete as per direction of EIC. 1.00 Each Tree 10765.68 Rupees Ten Thousand Seven Hundred Sixty Five and Sixty Eight Paise 10765.68

5 5 Earth work in excavation by mechanical means {Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, All kinds of soil, all complete as per direction of EIC. 2410.51 Cu.Mt. 156.62 Rupees One Hundred Fifty Six and Sixty Two Paise 377534.08

6 6 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil, all complete as per direction of EIC. 4.11 Cu.Mt. 229.68 Rupees Two Hundred Twenty Nine and Sixty Eight Paise 943.98

7 7 Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : exceeding 80 mm dia. but not exceeding 300 mm dia (150,200,300mm dia RCC pipe), all complete as per direction of EIC. 765.22 Meter 310.72 Rupees Three Hundred Ten and Seventy Two Paise 237769.16

8 8 ,do but above,… exceeding 300 mm dia but not exceeding 600 mm.(450 mm dia RCC pipe), all complete as per direction of EIC. 21.09 Meter 485.08 Rupees Four Hundred Eighty Five and Eight Paise 10230.34

9 9 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift., all complete as per direction of EIC. 470.05 Cu.Mt. 172.94 Rupees One Hundred Seventy Two and Ninety Four Paise 81290.45

10 10 Extra for every additional lift of 1.5 m or part thereof in excavation /banking excavated or stacked materials. All kinds of soil, all complete as per direction of EIC. 448.36 Cu.Mt. 111.88 Rupees One Hundred Eleven and Eighty Eight Paise 50162.52

11 11 Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete., all complete as per direction of EIC. 493.08 Cu.Mt. 1873.90 Rupees One Thousand Eight Hundred Seventy Three and Ninety Paise 923982.61

12 12 Pre Construction Aniti-termite Treatment of Soil under existing floor using chemical emulsion @ one litre per hole, 300mm apart including drilling 12mm diameter holes & plugging with cement mortar 1 : 2 (1cement : 2 coarse sand) to match the existing floor : with Chlorpyriphos/ Lindane E.C. 20% with 1% Concentration., all complete as per direction of EIC. 1250.10 Sq.Mt. 120.17 Rupees One Hundred Twenty and Seventeen Paise 150224.52

13 13 Providing and laying in position cement concrete 1:4:8 (1 Cement : 4 coarse sand (zone-Ill) derived from naturalsources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) of specified grade excluding the cost of centering and shuttering -All work up to plinth level:, all complete as per direction of EIC. 429.28 Cu.Mt. 6010.59 Rupees Six Thousand Ten and Fifty Nine Paise 2580226.08

14 14 Providing and laying cement concrete 1:1½:3 (1 cement : 1½ coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc., up to floor five level, excluding the cost of centering, shuttering and finishing :, all complete as per direction of EIC. 3.66 Cu.Mt. 9139.02 Rupees Nine Thousand One Hundred Thirty Nine and Two Paise 33448.81

15 15 Providing and laying in position ready mixed (Concrete of M-30 grade wih minimum cement content of 350 kg/cum) or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana I Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate I retard setting of concrete, to improve durability and workability without impairing strength;including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge, for the following grades of concrete.:All works up to Plinth Level., all complete as per direction of EIC. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discreation to either re-design the mix or bear the cost of extra cement. 1056.09 Cu.Mt. 8519.74 Rupees Eight Thousand Five Hundred Nineteen and Seventy Four Paise 8997612.22

16 16 ,-----do but above---- All works above plinth level upto floor V level Concrete of M-30 grade wih minimum cement content of 350 kg/cum, all complete as per direction of EIC. 794.98 Cu.Mt. 8833.55 Rupees Eight Thousand Eight Hundred Thirty Three and Fifty Five Paise 7022495.58

17 17 Steel reinforcement Thermo-Mechanically Treated bars of grade Fe-500D or more.for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level., all complete as per direction of EIC. 2334.47 Qtl. 9516.18 Rupees Nine Thousand Five Hundred Sixteen and Eighteen Paise 22215252.67

18 18 Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete, all complete as per direction of EIC. 361.13 Sq.Mt. 346.02 Rupees Three Hundred Forty Six and Two Paise 124958.20

19 19 Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers, all complete as per direction of EIC. 1920.23 Sq.Mt. 649.76 Rupees Six Hundred Forty Nine and Seventy Six Paise 1247688.64

20 20 Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts, all complete as per direction of EIC. 1972.36 Sq.Mt. 848.21 Rupees Eight Hundred Forty Eight and Twenty One Paise 1672975.48

21 21 Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform with water proof ply 12 mm thick, all complete as per direction of EIC. 1799.64 Sq.Mt. 907.41 Rupees Nine Hundred Seven and Forty One Paise 1633011.33

22 22 Providing and laying Autoclaved Aerated concrete(AAC) blocks masonry 100 mm/ 125 mm thick with Grade-1 AAC blocks of density 551 to 650 kg/cum conforming to IS:2185 (Part 3) in super structure above plinth level up to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand). The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonry work, all complete as per direction of EIC. 27.65 Cu.Mt. 8995.98 Rupees Eight Thousand Nine Hundred Ninety Five and Ninety Eight Paise 248738.85

23 23 Providing and laying Autoclaved Aerated concrete(AAC) blocks masonry with 150mm to 300 mm thick with Grade-1 AAC blocks of density 551 to 650 kg/cum conforming to IS:2185 (Part 3) in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for seperately)., all complete as per direction of EIC. 366.64 Cu.Mt. 7353.22 Rupees Seven Thousand Three Hundred Fifty Three and Twenty Two Paise 2695984.58

24 24 Providing and fixing 18 mm thick Granite stone slab colour black, Cherry/Ruby red gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Area of slab upto 0.50 sqm Granite stone slab colour black, Cherry/Ruby red, all complete as per direction of EIC. 11.08 Sq.Mt. 4776.62 Rupees Four Thousand Seven Hundred Seventy Six and Sixty Two Paise 52924.95

25 25 ,---do but above--- Area of slab over 0.50 sqm, all complete as per direction of EIC. 37.71 Sq.Mt. 4532.03 Rupees Four Thousand Five Hundred Thirty Two and Three Paise 170902.85

26 26 Providing edge moulding to 18 mm thick Granite Work /marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc., all complete as per direction of EIC. 391.38 Meter 450.84 Rupees Four Hundred Fifty and Eighty Four Paise 176449.76

27 26A 2000 X 2100 Double leaf Door Door leaf shall be 77mm thick fully flush door without vision lite. 75mm thick shutter, comprising of hardwood internal timber frame work, with infill of 39 mm thick fire resistant & accoustic wool insulation of 48 Kg/m3 density coated with VIPER FR coating on both sides for insulation. The coated insulation shall be sandwiched between 12mm thick HILUX Non Combustible (Calcium Silicate) Board on both sides (edge to edge on internal Hard wood frame and cladded with 6 mm thick Commercial Ply and 1.0 mm thick Laminate (Any Regular Shade) on both sides, with 77mm x 10mm exposed hard wood beading, 20 x4mm fire & smoke intumescent seal shall be used for shutter & for the frame. The Frame shall be 145 x 90mm of redmerranti with VIPER Fire reatrdent Primer. The rebate shall be of 20mm x 80 mm in Door Frame to accommodate the shutter in frame The board shall be Resistant to vermin, mould growth, minor impact, abrasion and short term water attack and shall be Off –white in colour with a smooth surface suitable to receive most forms of decoration., all complete as per direction of EIC. 5.00 Each 125388.14 Rupees One Lac Twenty Five Thousand Three Hundred Eighty Eight and Fourteen Paise 626940.70

Note: The above mentioned rate per door are inclusive of the following: 1. Single rebated redmerranti frame of section 145x90mm finished with Primer. 2. 77mm thick Wooden shutter Cladded with 6mm thick commercial Ply and 1.0 mm thick Laminate (Any Regular Shade) on both faces of shutter. 3. Above quoted price is exclusive of all hardwares, Accoustic Seal. However if required the same are payable in extra items.

28 27 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with M.S hold fast/ lugs/ SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (Frame size 50 x 100 mm) Note: (M.S hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/ window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variationin profile dimensions on plus side shall be acceptable but no extra payment \on this account shall be made., all complete as per direction of EIC. 52.00 Meter 836.21 Rupees Eight Hundred Thirty Six and Twenty One Paise 43482.92

29 28 Providing and fixing 35 mm thick factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately). Note: (M.S hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/ window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variationin profile dimensions on plus side shall be acceptable but no extra payment \on this account shall be made., all complete as per direction of EIC. 21.00 Sq.Mt. 4425.31 Rupees Four Thousand Four Hundred Twenty Five and Thirty One Paise 92931.51

30 29 Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineerin-charge. With stainless steel cover plate minimum 1.25 mm thickness, all complete as per direction of EIC. 18.00 Each 2491.63 Rupees Two Thousand Four Hundred Ninety One and Sixty Three Paise 44849.34

31 30 Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately)., all complete as per direction of EIC. 16.80 Sq.Mt. 4699.33 Rupees Four Thousand Six Hundred Ninety Nine and Thirty Three Paise 78948.74

32 31 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non- decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws., all complete as per direction of EIC. 8.40 Sq.Mt. 2111.16 Rupees Two Thousand One Hundred Eleven and Sixteen Paise 17733.74

33 32 Providing & Fixing of WOODEN FIRE CUM ACCOUSTIC DOOR, Door leaf shall be 77mm thick fully flush door without vision lite. 75mm thick shutter, comprising of hardwood internal timber frame work, with infill of 39 mm thick fire resistant & accoustic wool insulation of 48 Kg/m3 density coated with VIPER FR coating on both sides for insulation. The coated insulation shall be sandwiched between 12mm thick HILUX Non Combustible (Calcium Silicate) Board on both sides (edge to edge on internal Hard wood frame and cladded with 6 mm thick Commercial Ply and 1.0 mm thick Laminate (Any Regular Shade) on both sides, with 77mm x 10mm exposed hard wood beading, 20 x4mm fire & smoke intumescent seal shall be used for shutter & for the frame. The Frame shall be 145 x 90mm of redmerranti with VIPER Fire reatrdent Primer. The rebate shall be of 20mm x 80 mm in Door Frame to accommodate the shutter in frame The board shall be Resistant to vermin, mould growth, minor impact, abrasion and short term water attack and shall be Off –white in colour with a smooth surface suitable to receive most forms of decoration. (FHCD - 1000 x 2200 mm), all complete as per direction of EIC. 5.00 Each 70944.07 Rupees Seventy Thousand Nine Hundred Forty Four and Seven Paise 354720.35

34 33 Providing & Fixing of Rest Room Cubics, Size 900mm Width, 1800mm Depth, as per Greenlam sturdo thickness of compact laminate 12mm, Door size 600 x 1890mm, overall height 2100mm including 150mm ground clearance, SS Nylon Adjustable Foot, Nylon Gravity Hinge, Door Stopper Channel, Nylon Door Knob, Nylon Coat Hook wih Door Stopper, Nylon Lockset with Door Stopper, SSC 316 screw, Toprail & Wall Plug etc. in all complete. (Modular Toilet), all complete as per direction of EIC. 10.00 Each 34705.08 Rupees Thirty Four Thousand Seven Hundred Five and Eight Paise 347050.80

35 34 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete., all complete as per direction of EIC. 18.00 Each 992.51 Rupees Nine Hundred Ninety Two and Fifty One Paise 17865.18

36 35 Providing and fixing 300x16 mm aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :, all complete as per direction of EIC. 8.00 Each 267.57 Rupees Two Hundred Sixty Seven and Fifty Seven Paise 2140.56

37 36 Providing and fixing 300x10 mm aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessaryscrews etc. complete :, all complete as per direction of EIC. 8.00 Each 114.80 Rupees One Hundred Fourteen and Eighty Paise 918.40

38 37 ,---do but above--- size 150x10 mm, all complete as per direction of EIC. 12.00 Each 72.84 Rupees Seventy Two and Eighty Four Paise 874.08

39 38 Providing and fixing 125 mm aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :, all complete as per direction of EIC. 20.00 Each 58.45 Rupees Fifty Eight and Forty Five Paise 1169.00

40 39 ,---do but above--- size 75 mm, all complete as per direction of EIC. 8.00 Each 45.66 Rupees Forty Five and Sixty Six Paise 365.28

41 40 Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete., all complete as per direction of EIC. 15.00 Each 63.84 Rupees Sixty Three and Eighty Four Paise 957.60

42 41 Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc. complete., all complete as per direction of EIC. 34.00 Each 766.72 Rupees Seven Hundred Sixty Six and Seventy Two Paise 26068.48

43 42 Providing and fixing 125 mm bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete., all complete as per direction of EIC. 36.00 Each 105.18 Rupees One Hundred Five and Eighteen Paise 3786.48

44 43 Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/ mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc., all complete as per direction of EIC. 13.91 Sq.Mt. 8078.12 Rupees Eight Thousand Seventy Eight and Twelve Paise 112366.65

After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately. Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for : (i) Sites with basic wind speed > 45 m/sec as per IS 875 – Part 3 (ii) Sites with structure height more than 20m for all wind speeds. Fixed window / ventilator with mullion / transom Using R1 series with frame (33mm & above ) x (35mm & above) & mullion (33mm & above) x (50mm & above). (Height upto 0.90 metre)

45 44 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover, all complete as per direction of EIC. 73.52 Sq.Mt. 3223.41 Rupees Three Thousand Two Hundred Twenty Three and Forty One Paise 236985.10

46 45 Providing and fixing ball bearing for rolling shutters., all complete as per direction of EIC. 9.00 Each 434.43 Rupees Four Hundred Thirty Four and Forty Three Paise 3909.87

47 46 Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pretreatment of the surface , all complete as per direction of EIC. Profile B Fixing with adjustable lugs with split end tail to each jamb 23.60 Meter 514.68 Rupees Five Hundred Fourteen and Sixty Eight Paise 12146.45

48 47 Extra for providing mechanical device chain and crank operation for operating rolling shutters. Exceeding 10.00 sqm and upto 16.80 sqm in the area, all complete as per direction of EIC. 32.00 Sq.Mt. 1130.61 Rupees One Thousand One Hundred Thirty and Sixty One Paise 36179.52

49 48 ,---do but--Exceeding 16.80 sqm in area, all complete as per direction of EIC. 30.00 Sq.Mt. 1042.76 Rupees One Thousand Forty Two and Seventy Six Paise 31282.80

50 49 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes, all complete as per direction of EIC. 14042.40 Kg. 171.53 Rupees One Hundred Seventy One and Fifty Three Paise 2408692.87

51 50 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.), all complete as per direction of EIC. 152.25 Kg. 681.53 Rupees Six Hundred Eighty One and Fifty Three Paise 103762.94

52 51 62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacture’s specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. , all complete as per direction of EIC. 360.75 Sq.Mt. 931.90 Rupees Nine Hundred Thirty One and Ninety Paise 336182.93

53 52 Providing and laying Glazed Vitrified tiles 600x600 mm Matt/Antiskid finish of size (Thickness not less than 8 mm) in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily., all complete as per direction of EIC. 84.06 Sq.Mt. 1292.51 Rupees One Thousand Two Hundred Ninety Two and Fifty One Paise 108648.39

54 53 ,---do but above--- Size of Tile 600x1200 mm, all complete as per direction of EIC. 362.98 Sq.Mt. 1585.86 Rupees One Thousand Five Hundred Eighty Five and Eighty Six Paise 575635.46

55 54 Providing and laying Double charge vitrified tile 600x600 mm polished finish of size (Thickness not less than 8 mm) in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily., all complete as per direction of EIC. 449.74 Sq.Mt. 1282.63 Rupees One Thousand Two Hundred Eighty Two and Sixty Three Paise 576850.02

56 55 Providing and laying 5mm (1+4) Matt Finish PU Concrete Flooring, in all complete.Providing and applying high performance P U Concrete Flooring of Flooring of 3mm thick on concrete surface ,which include surface prepration throughly by sacrification ,Groove Cutting & cleaning all dirt, debris to achieve a sound surface . Application of scratch coat of 1mm and followed by application of final Top coat with Tuffcrete of 2mm by mixing base ,hardener,colour paste & aggregates (as per manufacturer's spesification ) , all complete as per direction of EIC. 360.75 Sq.Mt. 1900.00 Rupees One Thousand Nine Hundred Only 685425.00

57 56 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes 110 mm diameterconforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes., all complete as per direction of EIC. 69.80 Meter 333.00 Rupees Three Hundred Thirty Three Only 23243.40

58 57 Providing and fixing 110 mm Coupler on wall face unplasticised -PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion., all complete as per direction of EIC. 10.00 Each 120.13 Rupees One Hundred Twenty and Thirteen Paise 1201.30

59 58 ,--- do but above--- Single Tee with Door size 110 x 110 x 110 mm, all complete as per direction of EIC. 20.00 Each 206.61 Rupees Two Hundred Six and Sixty One Paise 4132.20

60 59 ,--- do but above--- Single Tee without Door size 110 x 110 x 110 mm, all complete as per direction of EIC. 10.00 Each 195.31 Rupees One Hundred Ninety Five and Thirty One Paise 1953.10

61 60 ,--- do but above--- Bend 87.5º size 110 mm, all complete as per direction of EIC. 10.00 Each 132.66 Rupees One Hundred Thirty Two and Sixty Six Paise 1326.60

62 61 ,--- do but above--- Shoe (Plain) size 110 mm, all complete as per direction of EIC. 8.00 Each 116.34 Rupees One Hundred Sixteen and Thirty Four Paise 930.72

63 62 Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams., all complete as per direction of EIC. 32.00 Each 48.27 Rupees Forty Eight and Twenty Seven Paise 1544.64

64 63 Providing and fixing 100 mm M.S. holder bat clamps of approved design to C.I. or S.C.I. rain water pipes embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 gradedstone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc. , all complete as per direction of EIC. 80.00 Each 320.16 Rupees Three Hundred Twenty and Sixteen Paise 25612.80

65 64 ,--- do but above--- 150 mm, all complete as per direction of EIC. 150.00 Each 349.06 Rupees Three Hundred Forty Nine and Six Paise 52359.00

66 65 Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc With average thickness of 120 mm and minimum thickness at khurra as 65 mm. consisting of following operations:, all complete as per direction of EIC. 1201.69 Sq.Mt. 1486.41 Rupees One Thousand Four Hundred Eighty Six and Forty One Paise 1786204.03

(a)Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.

(b)Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.

(c)After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge

(d)Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep

(e)The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. “All above operations to be done in order and as directed and specified by the Engineer-in-Charge.

67 66 Making khurras 45x45 cm with average minimum thickness of5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete., all complete as per direction of EIC. 43.00 Each 263.16 Rupees Two Hundred Sixty Three and Sixteen Paise 11315.88

68 67 Providing and fixing With 15 mm thick integral densified micro edge light weight calcium silicate false ceiling tiles at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991, in true horizontal level suspended on inter-locking metal powder coated T-Grid of hot dipped galvanised iron section of 0.40 mm thick on Silhouette profile,rotary stiched double webbed white with 6 mm reveal profile (white/ black),comprising of main-T runners of size 15x42 mm of length 3000 mm, cross - T of size 15x42 mm of length 1200 mm and secondary intermediate cross-T of size 15x42 mm of length 600 mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the EIC. 390.75 Sq.Mt. 2320.94 Rupees Two Thousand Three Hundred Twenty and Ninety Four Paise 906907.31

69 68 12 mm cement plaster of mix 1:6 (1 cement: 6 Coarse sand), all complete as per direction of EIC. 4703.37 Sq.Mt. 303.22 Rupees Three Hundred Three and Twenty Two Paise 1426155.85

70 69 6 mm cement plaster of mix 1:3 (1 cement: 3 Coarse sand), all complete as per direction of EIC. 132.63 Sq.Mt. 265.10 Rupees Two Hundred Sixty Five and Ten Paise 35160.21

71 70 Finishing walls with ready mixed Premium acrylic emulsion paint (Company Depot Tinted) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives. New work (Two or more coats applied @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. (External surface) all complete as per direction of EIC. 70.78 Sq.Mt. 159.92 Rupees One Hundred Fifty Nine and Ninety Two Paise 11319.14

72 71 Finishing walls with ready mixed Premium acrylic emulsion paint (Company Depot Tinted) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives. New work (Two or more coats applied @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. (Interal surface) all complete as per direction of EIC. 1097.54 Sq.Mt. 159.92 Rupees One Hundred Fifty Nine and Ninety Two Paise 175518.60

73 72 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture, all complete as per direction of EIC. 632.22 Sq.Mt. 199.63 Rupees One Hundred Ninety Nine and Sixty Three Paise 126210.08

74 73 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. Internal and External Surface, all complete as per direction of EIC. 2959.94 Sq.Mt. 137.69 Rupees One Hundred Thirty Seven and Sixty Nine Paise 407554.14

75 74 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation leveling & dressing & finishing the top smooth., all complete as per direction of EIC. 239.42 Sq.Mt. 661.15 Rupees Six Hundred Sixty One and Fifteen Paise 158292.53

76 75 Dismantling of Bituminous Road manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead, all complete as per direction of EIC. 380.16 Sq.Mt. 378.09 Rupees Three Hundred Seventy Eight and Nine Paise 143734.69

77 76 Supply of Rimlss Blind & Installataion of Wall Hung WC with UF Soft Close Slim Seat Cover Hinges including accessories, Set Size 360 x 500 x 330 MM, all complete as per direction of EIC. 13.00 Each 21186.44 Rupees Twenty One Thousand One Hundred Eighty Six and Forty Four Paise 275423.72

78 77 Supply & Fixing of Urinal with Sensor with Fixing Accessories Set Size 480 x 300 x 740 MM with Sensor Flushing Valve for Urinal with complete kit (Battery Operated) in , all complete as per direction of EIC. 6.00 Each 26303.39 Rupees Twenty Six Thousand Three Hundred Three and Thirty Nine Paise 157820.34

79 78 Supply & Fixing of Under Counter Basin wih Fixing Accessories, Size 605 x 410 x 200 MM, Shpae-Rectangular including Bottle Trap (with internal partition)32mm size with 300mm & 190mm long wall connection pipe & wall flange, Waste Coupling 32mm size full thread with 80mm height, bib cock with wall flange, 450mm long braided hose with M10 x 1 nipple, 15mm nut, O-ring & rubber washer (suitable for basin mixer) in , all complete as per direction of EIC. 15.00 Each 8050.85 Rupees Eight Thousand Fifty and Eighty Five Paise 120762.75

80 79 Providing & Fixing of overhead shower 120mm dia round shape, single flow (face plate stainless steel & ABS body in chrome finish) with rubit cleaning system inlcuding shower arm casted 190mm long flae shape for wall mounted shower with flange, all complete as per direction of EIC. 2.00 Each 2457.63 Rupees Two Thousand Four Hundred Fifty Seven and Sixty Three Paise 4915.26

81 80 Providing & fixing of angular stop cock with triangular handle and wall flange,, all complete as per direction of EIC. 15.00 Each 567.80 Rupees Five Hundred Sixty Seven and Eighty Paise 8517.00

82 81 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers, all complete as per direction of EIC. 15.00 Each 1418.78 Rupees One Thousand Four Hundred Eighteen and Seventy Eight Paise 21281.70

83 82 Providing and fixing C.P. brass toilet paper holder, all complete as per direction of EIC. 14.00 Each 709.15 Rupees Seven Hundred Nine and Fifteen Paise 9928.10

84 83 Supply, Installation, Testing & Commissioning of automatic Hand Dryer for Toilets , all complete as per direction of EIC. 4.00 Each 8389.83 Rupees Eight Thousand Three Hundred Eighty Nine and Eighty Three Paise 33559.32

85 84 Supply, Installation, Testing & Commissioning of Automatic Soap Dispenser for Wash Basin , all complete as per direction of EIC. 14.00 Each 7033.90 Rupees Seven Thousand Thirty Three and Ninety Paise 98474.60

86 85 Supply, Installation, Testing & Commissioning of Automatic Shoe Shine with Soal Cleaner (Boot Polisher), all complete as per direction of EIC. 2.00 Each 19218.64 Rupees Nineteen Thousand Two Hundred Eighteen and Sixty Four Paise 38437.28

87 86 Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms., all complete as per direction of EIC. 14.00 Each 148.55 Rupees One Hundred Forty Eight and Fifty Five Paise 2079.70

88 87 Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms., all complete as per direction of EIC. 14.00 Each 204.66 Rupees Two Hundred Four and Sixty Six Paise 2865.24

89 88 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.(450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms.), all complete as per direction of EIC. 4.00 Each 594.18 Rupees Five Hundred Ninety Four and Eighteen Paise 2376.72

90 89 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes 32 mm nominal outer dia, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall, all complete as per direction of EIC. 18.00 Meter 457.72 Rupees Four Hundred Fifty Seven and Seventy Two Paise 8238.96

91 90 ,--do but above--- 50 mm nominal dia Pipes, all complete as per direction of EIC. 9.00 Meter 824.25 Rupees Eight Hundred Twenty Four and Twenty Five Paise 7418.25

92 91 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes 15 mm nominal outer dia, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. :Concealed work, including cutting chases and making good the walls etc., all complete as per direction of EIC. 25.80 Meter 439.24 Rupees Four Hundred Thirty Nine and Twenty Four Paise 11332.39

93 92 ,--do but above--- 20 mm nominal dia Pipes, all complete as per direction of EIC. 18.40 Meter 474.35 Rupees Four Hundred Seventy Four and Thirty Five Paise 8728.04

94 93 ,--do but above--- 25 mm nominal dia Pipes, all complete as per direction of EIC. 12.85 Meter 553.45 Rupees Five Hundred Fifty Three and Forty Five Paise 7111.83

95 94 ,--do but above--- 32 mm nominal dia Pipes, all complete as per direction of EIC. 0.60 Meter 652.33 Rupees Six Hundred Fifty Two and Thirty Three Paise 391.40

96 95 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes 80 mm nominal inner dia., having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge : External work 27.85 Meter 1911.49 Rupees One Thousand Nine Hundred Eleven and Forty Nine Paise 53235.00

97 96 Providing and fixing G.I. pipes 32 mm dia nominal bore complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal Work - Exposed on Wall, all complete as per direction of EIC. 2.72 Meter 588.53 Rupees Five Hundred Eighty Eight and Fifty Three Paise 1600.80

98 97 ,--do but above--- 40 mm nominal dia Pipes, all complete as per direction of EIC. 32.49 Meter 716.39 Rupees Seven Hundred Sixteen and Thirty Nine Paise 23275.51

99 98 ,--do but above--- 50 mm nominal dia Pipes, all complete as per direction of EIC. 9.40 Meter 925.02 Rupees Nine Hundred Twenty Five and Two Paise 8695.19

100 99 Making connection of G.I. distribution branch 50 to 80 mm nominal bore with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete, all complete as per direction of EIC. 2.00 Each 1575.31 Rupees One Thousand Five Hundred Seventy Five and Thirty One Paise 3150.62

101 100 Fixing water meter and stop cock in G.I. pipe line including cutting and threading the pipe and making long screws etc. complete (cost of water meter and stop cock to be paid separately)., all complete as per direction of EIC. 1.00 Each 716.74 Rupees Seven Hundred Sixteen and Seventy Four Paise 716.74

102 101 Providing and fixing 15 mm nominal bore brass stop cock of approved quality, all complete as per direction of EIC. 5.00 Each 311.69 Rupees Three Hundred Eleven and Sixty Nine Paise 1558.45

103 102 Providing and fixing gun metal gate valve 25 mm nominal bore with C.I. wheel of approved quality (screwed end) :, all complete as per direction of EIC. 8.00 Each 549.18 Rupees Five Hundred Forty Nine and Eighteen Paise 4393.44

104 103 ,--do but above--- 32 mm nominal bore, all complete as per direction of EIC. 4.00 Each 608.47 Rupees Six Hundred Eight and Forty Seven Paise 2433.88

105 104 ,--do but above--- 50 mm nominal bore, all complete as per direction of EIC. 4.00 Each 905.87 Rupees Nine Hundred Five and Eighty Seven Paise 3623.48

106 105 Providing and fixing ball valve (brass) 15 mm nominal bore of approved quality, High or low pressure, with plastic floats complete :, all complete as per direction of EIC. 2.00 Each 358.98 Rupees Three Hundred Fifty Eight and Ninety Eight Paise 717.96

107 106 ,--do but above--- 25 mm nominal bore, all complete as per direction of EIC. 6.00 Each 409.45 Rupees Four Hundred Nine and Forty Five Paise 2456.70

108 107 Providing and fixing uplasticised PVC connection pipe 15 mm nominal bore and 45 cm length with brass unions :, all complete as per direction of EIC. 30.00 Each 86.25 Rupees Eighty Six and Twenty Five Paise 2587.50

109 108 Providing and fixing C.P. brass shower rose 150 mm diameter with 15 or 20 mm inlet :, all complete as per direction of EIC. 2.00 Each 196.19 Rupees One Hundred Ninety Six and Nineteen Paise 392.38

110 109 Painting G.I. pipes 32 mm diameter and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work :, all complete as per direction of EIC. 2.72 Meter 32.08 Rupees Thirty Two and Eight Paise 87.26

111 110 ,--do but above--- 40 mm nominal dia Pipes, all complete as per direction of EIC. 32.49 Meter 37.63 Rupees Thirty Seven and Sixty Three Paise 1222.60

112 111 ,--do but above--- 50 mm nominal dia Pipes, all complete as per direction of EIC. 9.40 Meter 45.00 Rupees Forty Five Only 423.00

113 112 Providing and fixing G.I. Union 15 mm nominal bore in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :, all complete as per direction of EIC. 6.00 Each 280.90 Rupees Two Hundred Eighty and Ninety Paise 1685.40

114 113 ,--do but above --- 20 mm nominal bore, all complete as per direction of EIC. 4.00 Each 306.00 Rupees Three Hundred Six Only 1224.00

115 114 ,--do butabove--- 25 mm nominal bore, all complete as per direction of EIC. 4.00 Each 387.57 Rupees Three Hundred Eighty Seven and Fifty Seven Paise 1550.28

116 115 ,--do but above--- 32 mm nominal bore, all complete as per direction of EIC. 2.00 Each 431.51 Rupees Four Hundred Thirty One and Fifty One Paise 863.02

117 116 ,--do but above--- 40 mm nominal bore, all complete as per direction of EIC. 2.00 Each 557.03 Rupees Five Hundred Fifty Seven and Three Paise 1114.06

118 117 ,--do but above--- 50 mm nominal bore, all complete as per direction of EIC. 2.00 Each 726.88 Rupees Seven Hundred Twenty Six and Eighty Eight Paise 1453.76

119 118 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank., (1000 Litre x 2 Nos. & 5000 Litre x 4 Nos.) all complete as per direction of EIC. 22000.00 Litre 9.71 Rupees Nine and Seventy One Paise 213620.00

120 119 Providing and fixing C.P. brass long body bib cock 15 mm nominal bore of approved quality conforming to IS standards and weighing not less than 690 gms., all complete as per direction of EIC. 4.00 Each 704.96 Rupees Seven Hundred Four and Ninety Six Paise 2819.84

121 120 Providing and fixing C.P. brass angle valve 15 mm nominal bore for basin mixer and geyser points of approved quality conforming to IS:8931 :, all complete as per direction of EIC. 1.00 Each 506.74 Rupees Five Hundred Six and Seventy Four Paise 506.74

122 121 Providing and fixing PTMT grating 100 mm nominal dia. Circular type. of approved quality and colour. , all complete as per direction of EIC. 24.00 Each 33.18 Rupees Thirty Three and Eighteen Paise 796.32

123 122 Providing and fixing PTMT soap Dish Holder having length of 138 mm, breadth 102 mm, height of 75 mm with concealed fitting arrangements. Weighing not less than 106 gms., all complete as per direction of EIC. 15.00 Each 98.34 Rupees Ninety Eight and Thirty Four Paise 1475.10

124 123 Cutting holes up to 30x30 cm in walls with common burnt clay F.P.S. (non modular) bricks including making good the same:, all complete as per direction of EIC. 20.00 Each 367.76 Rupees Three Hundred Sixty Seven and Seventy Six Paise 7355.20

125 124 Providing and laying 250 mm dia. non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :, all complete as per direction of EIC. 141.15 Meter 793.94 Rupees Seven Hundred Ninety Three and Ninety Four Paise 112064.63

126 125 ,--do but above--- 300 mm dia. R.C.C. pipe, all complete as per direction of EIC. 111.44 Meter 877.33 Rupees Eight Hundred Seventy Seven and Thirty Three Paise 97769.66

127 126 Constructing brick masonry manhole with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design:Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :, all complete as per direction of EIC. 4.00 Each 11268.13 Rupees Eleven Thousand Two Hundred Sixty Eight and Thirteen Paise 45072.52

128 127 ,--do but above--- Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) :, all complete as per direction of EIC. 2.00 Each 23298.97 Rupees Twenty Three Thousand Two Hundred Ninety Eight and Ninety Seven Paise 46597.94

129 128 ,--do but above sl. No. 142--- Extra for depth for manholes : Size 90x80 cm, all complete as per direction of EIC. 1.00 Meter 7787.12 Rupees Seven Thousand Seven Hundred Eighty Seven and Twelve Paise 7787.12

130 129 ,--do but above sl. No. 143--- Extra for depth for manholes : Size 120x90 cm, all complete as per direction of EIC. 1.00 Meter 9340.15 Rupees Nine Thousand Three Hundred Forty and Fifteen Paise 9340.15

131 130 Providing M.S. foot rests with 20x20 mm square bar including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design : including UGT, all complete as per direction of EIC. 40.00 Each 480.62 Rupees Four Hundred Eighty and Sixty Two Paise 19224.80

132 131 Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality L D- 2.5 (Rectangular shape 600x450 mm internal dimensions including UGT), all complete as per direction of EIC. 4.00 Each 1268.51 Rupees One Thousand Two Hundred Sixty Eight and Fifty One Paise 5074.04

133 132 Making connection of drain or sewer line for pipes 250 to 300 mm diameter with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete :, all complete as per direction of EIC. 1.00 Each 813.88 Rupees Eight Hundred Thirteen and Eighty Eight Paise 813.88

134 133 Constructing brick masonry road gully chamber 50x45x60 cm with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design :, all complete as per direction of EIC. 5.00 Each 5256.97 Rupees Five Thousand Two Hundred Fifty Six and Ninety Seven Paise 26284.85

135 134 Constructing brick masonry chamber for underground C.I. inspection chamber and bends with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 455x610 mm and 45 cm deep for single pipe line :, all complete as per direction of EIC. 60.00 Each 6121.68 Rupees Six Thousand One Hundred Twenty One and Sixty Eight Paise 367300.80

136 135 ,---do but above--- Inside dimensions 500x700 mm and 45 cm deep for pipe line with one or two inlets :, all complete as per direction of EIC. 13.00 Each 7191.62 Rupees Seven Thousand One Hundred Ninety One and Sixty Two Paise 93491.06

137 136 ,---do but above--- Inside dimensions 600x 850 mm and 45 cm deep for pipe line with one or two inlets :, all complete as per direction of EIC. 58.00 Each 8465.61 Rupees Eight Thousand Four Hundred Sixty Five and Sixty One Paise 491005.38

138 137 ,---do but as sl no.149 --- Extra for depth beyond 45 cm of brick masonry chamber : For 455x610 mm size, all complete as per direction of EIC. 41.00 Meter 5397.35 Rupees Five Thousand Three Hundred Ninety Seven and Thirty Five Paise 221291.35

139 138 ,---do but as sl no.150 --- Extra for depth beyond 45 cm of brick masonry chamber : For 500x700 mm size, all complete as per direction of EIC. 1.00 Meter 5894.65 Rupees Five Thousand Eight Hundred Ninety Four and Sixty Five Paise 5894.65

140 139 ,---do but as sl no.151 --- Extra for depth beyond 45 cm of brick masonry chamber : For 600x850 mm size, all complete as per direction of EIC. 51.00 Meter 6873.39 Rupees Six Thousand Eight Hundred Seventy Three and Thirty Nine Paise 350542.89

141 140 Providing and laying Non Pressure NP-3 class (Medium duty) 450 mm dia R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. , all complete as per direction of EIC. 20.90 Meter 2361.66 Rupees Two Thousand Three Hundred Sixty One and Sixty Six Paise 49358.69

142 141 Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry., all complete as per direction of EIC. 71.44 Sq.Mt. 544.45 Rupees Five Hundred Forty Four and Forty Five Paise 38895.51

143 142 Providing & Applying polymer modified, flexible cementatious negative side waterproofing coating with elastic waterproofing polymers on interior wall plaster surface in three coats @14.35 kg /10 sqm. one coat of self priming of cementatious waterproofing polymer(dilution with water in the ratio of 1:1) and two coats of cementatious waterproofing polymer (dilution with water in the ratio of 3:1 ) after scrapping and properly cleaning the surface to remove pre-existing paint film & loose particles till plaster is visible, complete in all respect as per the direction of EIC. 94.97 Sq.Mt. 394.72 Rupees Three Hundred Ninety Four and Seventy Two Paise 37486.56

144 143 Providing and applying integral crystalline (dry shake) of hydrophilic in nature for waterproofing treatment to the RCC structures like basement raft, foundation slab, sewage & water treatment plant slab, warehouses floor, parking structures and water tank base slab etc. sprinkled @0.60kg per sqm or higher as recommended by the manufacturer’s specification over the lean concrete of above cited structures. The material shall meet the requirements as specified in ACI- 12-3R-2010 i.e. by reducing permeability of concrete by more than 85%, compared control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline dryshake shall be capable of selfhealing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the Engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage., all complete as per direction of EIC. 94.97 Sq.Mt. 273.18 Rupees Two Hundred Seventy Three and Eighteen Paise 25943.90

145 144 Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6 mm thick, of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade, an inner Heat strengthned clear float glass 6mm thick, spacer tube 12mm wide, dessicants, including primary seal and secondary seal (structural silicone sealant) etc. all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineerin-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor.(Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.25.2)For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm. (i)Coloured tinted float glass 6 mm thick substrate with reflective soft coating on face # 2, + 12 mm Airgap + 6 mm Heat Strengthened clear Glass of approved make having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement., all complete as per direction of EIC. 641.78 Sq.Mt. 3281.21 Rupees Three Thousand Two Hundred Eighty One and Twenty One Paise 2105814.95

146 145 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 8 mm thickness (weight not less than 20 Kg/Sqm 226.09 Sq.Mt. 1487.12 Rupees One Thousand Four Hundred Eighty Seven and Twelve Paise 336222.96

147 146 Supply & Laying of Hingh Intensity Glow Tough Floor Tape, 4 inch width in yellow color around Simulator Equipment Pad in Sumulator Hall as per provided specification, all complete as per direction of EIC. 100.00 Meter 894.92 Rupees Eight Hundred Ninety Four and Ninety Two Paise 89492.00

148 147 Providing laying and jointing of Drain Master 160 mm Type "A" Pipes, Ss 3 meter (Astral), all complete as per direction of EIC. 140.71 Meter 525.42 Rupees Five Hundred Twenty Five and Forty Two Paise 73931.85

149 148 Providing and fixing 150 mm diameter Single Socketed Pipes on wall face unplasticised Rigid PVC Rain Water Pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion., all complete as per direction of EIC. 939.50 Meter 550.85 Rupees Five Hundred Fifty and Eighty Five Paise 517523.58

150 149 Providing and fixing on wall face unplasticised PVC moulded fittings/accessories for unplasticised Rigid PVC Rain Water Pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. (150mm dia Coupler), all complete as per direction of EIC. 10.00 Each 425.42 Rupees Four Hundred Twenty Five and Forty Two Paise 4254.20

151 150 Providing and fixing on wall face unplasticised PVC moulded fittings/accessories for unplasticised Rigid PVC Rain Water Pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. (150 x 150 x 150 mm Single Tee with Door ), all complete as per direction of EIC. 6.00 Each 1101.69 Rupees One Thousand One Hundred One and Sixty Nine Paise 6610.14

152 151 Providing and fixing on wall face unplasticised PVC moulded fittings/accessories for unplasticised Rigid PVC Rain Water Pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. ( 150 mm Bend 87.5º), all complete as per direction of EIC. 10.00 Each 806.78 Rupees Eight Hundred Six and Seventy Eight Paise 8067.80

153 152 Providing and fixing of UD Nahani Trap, including cost of cutting and making good the walls and floors., all complete as per direction of EIC. 35.00 Each 111.02 Rupees One Hundred Eleven and Two Paise 3885.70

154 153 Providing and fixing of 2D Glow Sign Board, Size 6.0M x 1.0M in all complete., all complete as per direction of EIC. 1.00 Each 49429.66 Rupees Forty Nine Thousand Four Hundred Twenty Nine and Sixty Six Paise 49429.66

155 154 Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)of specified grade excluding the cost of centering and shuttering - All work up to plinth level :, all complete as per direction of EIC. 1.57 Cum. 6951.62 Rupees Six Thousand Nine Hundred Fifty One and Sixty Two Paise 10914.04

156 155 Providing and laying reinforced cement concrete work 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size) in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :, all complete as per direction of EIC. 6.77 Cum. 9576.13 Rupees Nine Thousand Five Hundred Seventy Six and Thirteen Paise 64830.40

157 156 Centering and shuttering including strutting, propping etc. and removal of form for all heights : Lintels, beams, plinth beams, girders, bressumers and cantilevers. with water proof ply 12 mm thick, all complete as per direction of EIC. 3.32 Sqm. 742.90 Rupees Seven Hundred Forty Two and Ninety Paise 2466.43

158 157 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 with Cement mortar 1:4 (1 cement : 4 coarse sand) in foundation and plinth in:, all complete as per direction of EIC. 43.44 Cum. 6503.51 Rupees Six Thousand Five Hundred Three and Fifty One Paise 282512.47

159 158 15 mm cement plaster 1:4 (1 cement: 4 fine sand) on rough side of single or half brick wall finished with a floating coat of neat cement of mix :, all complete as per direction of EIC. 165.59 Sqm. 421.68 Rupees Four Hundred Twenty One and Sixty Eight Paise 69825.99

160 159 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers, all complete as per direction of EIC. 20.00 Per Bag. 19.50 Rupees Nineteen and Fifty Paise 390.00

161 160 Providing, laying and jointing PVC pipes 225 mm diameter conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, all complete as per direction of EIC. 120.20 Mtr. 347.46 Rupees Three Hundred Forty Seven and Forty Six Paise 41764.69

162 161 Supplying and fixing C.I. cover without frame for manholes : 455x610 mm rectangular C.I. cover with frame (low duty), all complete as per direction of EIC. 4.00 Each 1198.24 Rupees One Thousand One Hundred Ninety Eight and Twenty Four Paise 4792.96

163 162 2.00 to 4.75mm size pea Gravel, supply duly screened and washed., all complete as per direction of EIC. 4.64 Cum. 1058.82 Rupees One Thousand Fifty Eight and Eighty Two Paise 4912.92

164 163 Supply and filling of coarse aggregate of size 20mm nominal size., all complete as per direction of EIC. 4.64 Cum. 1257.35 Rupees One Thousand Two Hundred Fifty Seven and Thirty Five Paise 5834.10

165 164 Boring/drilling bore well 300 mm dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level.All types of soil, all complete as per direction of EIC. 140.00 Mtr. 624.49 Rupees Six Hundred Twenty Four and Forty Nine Paise 87428.60

166 165 Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe 150 mm nominal size dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. 60.00 Mtr. 699.92 Rupees Six Hundred Ninety Nine and Ninety Two Paise 41995.20

167 166 Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs 150 mm nominal size dia, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 80.00 Mtr. 712.45 Rupees Seven Hundred Twelve and Forty Five Paise 56996.00

168 167 Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. 2.40 Cum. 1332.18 Rupees One Thousand Three Hundred Thirty Two and Eighteen Paise 3197.23

169 168 Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. 2.40 Cum. 1357.28 Rupees One Thousand Three Hundred Fifty Seven and Twenty Eight Paise 3257.47

170 169 Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -incharge. 2.40 Cum. 1357.28 Rupees One Thousand Three Hundred Fifty Seven and Twenty Eight Paise 3257.47

171 170 Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge. 13.19 Cu.Mt. 1786.33 Rupees One Thousand Seven Hundred Eighty Six and Thirty Three Paise 23561.69

172 171 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round pipes including bed concrete as per standard design : (150 mm diameter S.W. Pipe), all complete as per direction of EIC. 201.80 Mtr. 1041.04 Rupees One Thousand Forty One and Four Paise 210081.87

173 172 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round pipes including bed concrete as per standard design : (200 mm diameter S.W. Pipe), all complete as per direction of EIC. 102.20 Mtr. 1213.63 Rupees One Thousand Two Hundred Thirteen and Sixty Three Paise 124032.99

174 173 Providing and laying non-pressure NP2 class (light duty) 300mm dia R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :, all complete as per direction of EIC. 124.20 Mtr. 877.33 Rupees Eight Hundred Seventy Seven and Thirty Three Paise 108964.39

175 174 Providing & applying anti-corrosive epoxy based CPC coating on stacked reinformcement of each dia before cutting & bending at site in all complete., all complete as per direction of EIC. 513.58 Litre 183.05 Rupees One Hundred Eighty Three and Five Paise 94010.82

Sub Total of Part A 70732327.97

Sub Total of Part A including GST@ 18% and Cess@ 1% 84171470.28

B PART-B (ELECTRICAL WORK)

176 1 Supply & fixing of 300 mm Sweep, 230/250 Volts, 50 Hz heavy duty exhaust fan with blades, cover etc. complete as required. Make:Bajaj/Crompton/Havells 10.00 Nos 2600.00 Rupees Two Thousand Six Hundred Only 26000.00

177 2 Supply & fixing 7 to 9 watt LED mirror light long life LED source with inbilt driver white/warm white colour input supply 220 ± 25% V AC with heat resistant with suitable arrangement for fitting,external built proper heat sinks, Aluminium body with two core flexible copper conductor cable of suitable size from LED to celling rose complete as per site requirement and as accepted by Engineer in-charge. Makes: Havells/Wipro/ Philips/Jaquar including all fixing items to be fixed. 8.00 Nos 1600.00 Rupees One Thousand Six Hundred Only 12800.00

178 3 Supply and fixing of factory wired Box type 18W LED tube light fitting with the help of suitable twin core 0.75 sqmm cable (Havell's / KEI / Finolex/Gloster make) from fitting to ceiling rose/junction box, suitable arrangment and complete accessories in all respect. Make:Havells/Philips/ Bajaj/Wipro/Surya 30.00 Nos 500.00 Rupees Five Hundred Only 15000.00

179 4 Supply & fixing of recess/surface/pendent mounting round 12 W LED Down light round /ractagle sape size as per site requirement with driver white/warm white colour input supply 220 ± 25% V AC with recessed low depth Aluminium heat sink with suitable arrangement for fitting,external built proper heat sinks, with two core flexible copper conductor cable of suitable size from LED to celling rose complete as per site requirement and as accepted by Engineer in-charge. Make Havells/Wipro/Philips/Jaquar including all fixing items to be fixed. 70.00 Nos 1000.00 Rupees One Thousand Only 70000.00

180 5 Supply and fix of LED surface/recess mounting fitting 2feet X 2 feet of rating 36 ± 04 watt complete in all respect. can operate on 220 ±25% Volt AC 50 Hz. LED complete fitting having powder coated die cast aluminium housing with heat sink amd doffiser / reflector of polycarbonate material and driver set. Make: Crompton Greaves / Wipro / Philips /Bajaj. It includes cost of twin core connecting wire from LED light fitting to ceiling rose. 36.00 Nos 1700.00 Rupees One Thousand Seven Hundred Only 61200.00

181 6 Supply and fixing of 200 watt ± 10% LED High Bay light, Pure White color, body material Pressure die-cast aluminum housing, Input 270 Volt, 26000 Im luminous Flux with compatible fitted suitable for mounting on the existing/new bracket arms with fixing attachments and fixing of lamp with the help of suitable three core 0.75 sqmm cable(supplied from contractor as per requirement) from fitting to ceiling rose/junction box, suitable arrangment and complete accessories. Make:Havells/Philips/Bajaj/Wipro/Surya 9.00 Nos 6800.00 Rupees Six Thousand Eight Hundred Only 61200.00

182 7 Supply & fix 80 to 100W watt LED street light input supply 220 ± 25% V AC with Auto resetting Safety Cut-off with LENS single piece sheet IP66 powder coated pressure die cast aluminium compact high power with heat resistant toughened glass with lens screwed inside on the cast aluminium pipe mounting arrangement along with pipe Makes: Crompton Greaves/Wipro /Philips/Bajaj including all fixing items to be fixed like hanging hook, pipe, bolt & nuts. 20.00 Nos 2875.00 Rupees Two Thousand Eight Hundred Seventy Five Only 57500.00

183 8 Supply power cable of 11 KV grade of 120 sq.mm X 3 core complete testing and commissioning XLPE insulated Aluminium conductor armoured underground HT cable. As per site requirement or directed by EIC. Make: Gloster/ Havells/ KEI/ Polycab/ Finolex 600.00 Metre 1385.00 Rupees One Thousand Three Hundred Eighty Five Only 831000.00

184 9 Supplying, Installation, Testing & Commissioning of 11KV VCB indoor type panels shall be constructed from CRCA Zinc coated steel sheet of minimum 2 mm thickness, floor mounted metal enclosed, totally enclosed and fully interlocked, horizontal draw out, horizontal isolation type breaker as per IS 13118, as amended up to date, suitable for use on 11 KV, 3 phase, 50 Hz A.C. supply with short circuit fault level of minimum 36kA. Make:CG/ABB/SIEMENS/SCHNEIDER/GE/LK(L&T) 1.00 Nos 557750.00 Rupees Five Lac Fifty Seven Thousand Seven Hundred Fifty Only 557750.00

1- Metal Clad housing with track having 1250A TP integral VCB with Electric operated draw out type mechanism (spring charged motor 230 VAC).

01Set - Air insulated copper bus bar & chamber.

01Set - isolating plug and receptacle.

01Set - Automatic safety shutter.

01Set - Breaker control switch (TNC)

02Set- CT's class 5P-10(15 VA) & class -1(15 VA)

01Set - Digital Multifunction Meter.

3Nos - PT's 11KV /Rt.3 /110V/Rt 3 of (100 VA) cast resin type.

01Set - H.T. Cable box for 3C x 300 sq.mm Alu XLPE cable at incomming & 3C x 120 sq mm Alu XLPE Cable on Outgoing (11 KV System).

01No. Tripping coil & closing Coil 110V DC.

01Set - ON/OFF/Trip & circuit healthy and phase indicating lights.

1No - O/C, EF & SC relay

01Set - Auxiliary relays (buchholz, PRV, OTI, WTI protection and alarm etc).

1No - Master trip relay (Numerical type)

1Set -Trip circuit supervision

1No - Restricted Earth fault relay (Numerical type)

185 10 Supply, fixing installation, testing and commissioning including foundation / civil work L.T. panel Main PCC Panel: Incoming Side 1250A 4P ACB with O/L, S/C & E/F (BC-50 KA-EDO Typer, Microprocessor based) - 1 nos, 800A 4P ACB with O/L, S/C & E/F (BC-50 KA-EDO Typer, Microprocessor based) - 1 nos. (Ele & Mech Interlocking System, at a time only One ACB ON with AMF Provision), Metering with flush mounted CT operated Multifunction Meter class one - 2Sets, 800A 4P on load changeover- 1No., BUSBAR - 1600A aluminium busbar (0.8 Amp/sq mm) with sutaible size heat srinkable sleev & insulator. Outgoing Side: 630A 4P MCCB (36KA-TM)-01No,400A 4P MCCB (36KA-TM)- 02No, 250A 4P MCCB (36 KA-TM) - 1No, 200A 4P MCCB (36KA-TM)-02No, 160A 4P MCCB (36KA-TM)-01No, 100A 4P MCCB (36KA-TM)-01No, 63A 4P MCB (10KA) -02No & 32A 4P MCB (10KA)-02No dust and vermin proof L.T. distribution panel board as per applicable latest IS, CPRI approved fabricated with min 14 SWG CRCA sheet floor mounting on M.S. channel base frame indoor type front and rear openable. Complete in all respects and site requirement or directed by EIC. Work including foundation / civil work as per site required. as per site requirement or directed by EIC. Make ACB, MCCB & MCB:Legrand/LK/ Hagar/ABB/Havells/Schneider/Siemens 1.00 Nos 1345000.00 Rupees Thirteen Lac Forty Five Thousand Only 1345000.00

186 11 Supply, fixing installation, testing and commissioning including foundation / civil work L.T. panel of Power & Lighting Panel: Incoming Side 250A 4P MCCB (36KA- TM). Metering with flush mounted CT operated VAF Meter class one -1Set. BUSBAR - 300A aluminium busbar (0.8 Amp/sq mm) with sutaible size heat srinkable sleev & insulator. Outgoing Side: 100A 4P MCCB (25KA-TM)-01No, 63A 4P MCCB (36 KA-TM) -6No, 63A 4P MCB (10KA)-02No, 32A 4P MCB (10KA)- 02No & 32A 2P MCB (10KA)-02No. dust and vermin proof L.T. distribution panel board as per applicable latest IS, CPRI approved fabricated with min 16 SWG CRCA sheet floor mounting on M.S. channel base frame indoor type front and rear openable. Complete in all respects and site requirement or directed by EIC. Work including foundation / civil work as per site required. as per site requirement or directed by EIC. Make MCCB & MCB:Legrand/LK/ Hagar/ABB/Havells/Schneider/Siemens 1.00 Nos 245000.00 Rupees Two Lac Forty Five Thousand Only 245000.00

187 12 Supply, fixing installation, testing and commissioning including foundation / civil work L.T. panel of Feedar Pillar Panel (D/D Outdoor Type): Incoming Side: 100A 4P MCCB (BC-25 KA) - 1N0, Metering with flush mounted CT operated VAF Meter class one -1Set. BUSBAR - 150A aluminium busbar (0.8 Amp/sq mm) with sutaible size heat srinkable sleev & insulator. Outgoing Side 63A 4P MCB (10KA)-3, 32A 4P MCB (10KA)-2No, 63A 4P Power Contactor, 24H Digital Timer with A/M SS & 4nos 16A 4P MCB (10KA). dust and vermin proof L.T. distribution panel board as per applicable latest IS, CPRI approved fabricated with min 16 SWG CRCA sheet floor mounting on M.S. channel base frame indoor type front and rear openable. Complete in all respects and site requirement or directed by EIC. Work including foundation / civil work as per site required. as per site requirement or directed by EIC. Make MCCB & MCB: Legrand/LK/ Hagar/ ABB/ Havells/Schneider/Siemens 1.00 Nos 136000.00 Rupees One Lac Thirty Six Thousand Only 136000.00

188 13 Supply, fixing installation, testing and commissioning including foundation / civil work L.T. panel of UPS MCCB: Incoming/Ougoing Side: 400A 4P MCCB (BC-36 KA) - 2N0, Metering with flush mounted CT operated VAF Meter class one -1Set. BUSBAR - 400A aluminium busbar (0.8 Amp/sq mm) with sutaible size heat srinkable sleev & insulator. dust and vermin proof L.T. distribution panel board as per applicable latest IS, CPRI approved fabricated with min 16 SWG CRCA sheet floor mounting on M.S. channel base frame indoor type front and rear openable. Complete in all respects and site requirement or directed by EIC. Work including foundation / civil work as per site required. as per site requirement or directed by EIC. Make MCCB & MCB:Legrand/LK/ Hagar/ABB/Havells/Schneider/Siemens 1.00 Nos 125350.00 Rupees One Lac Twenty Five Thousand Three Hundred Fifty Only 125350.00

189 14 Supply of 1.1 KV grade of 10 sq.mm X 4 core power cable complete testing and commissioning XLPE insulated Aluminium conductor armoured underground LT cable. As per site requirement or directed by EIC. Make: Gloster/ Havells/ KEI/ Polycab/ Finolex 450.00 Metre 170.00 Rupees One Hundred Seventy Only 76500.00

190 15 Supply of 1.1 KV grade of 95 sq.mm X 3½ core power cable complete testing and commissioning XLPE insulated Aluminium conductor armoured underground LT cable. As per site requirement or directed by EIC. Make: Gloster/ Havells/ KEI/ Polycab/ Finolex 90.00 Metre 619.00 Rupees Six Hundred Nineteen Only 55710.00

191 16 Supply of 1.1 KV grade of 150 sq.mm X 3½ core power cable complete testing and commissioning XLPE insulated Aluminium conductor armoured underground LT cable. As per site requirement or directed by EIC. Make: Gloster/ Havells/ KEI/ Polycab/ Finolex 40.00 Meter 930.00 Rupees Nine Hundred Thirty Only 37200.00

192 17 Supply of 1.1 KV grade of 300 sq.mm X 3½ core power cable complete testing and commissioning XLPE insulated Aluminium conductor armoured underground LT cable. As per site requirement or directed by EIC. Make: Gloster/ Havells/ KEI/ Polycab/ Finolex 100.00 Meter 1815.00 Rupees One Thousand Eight Hundred Fifteen Only 181500.00

193 18 Supply of 1.1 KV grade of 10 sq.mm X 4 core power cable complete testing and commissioning PVC/XLPE insulated Copper conductor armoured LT cable. As per site requirement or directed by EIC. Make: Gloster/ Havells/ KEI/ Polycab/ Finolex 150.00 Meter 900.00 Rupees Nine Hundred Only 135000.00

194 19 Supply & fixing of 9 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130mm and base plate 12mm thik) having 3mm thikness with single/Double arm bracket (1 Mtr length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back fillingand required T&P completee in all respect 10.00 Nos 19000.00 Rupees Nineteen Thousand Only 190000.00

195 20 Supply Installation testing & Commissioning of Building Copper Lighting arrestor of 6KA along with 1.00 meter copper solid bar/rod and complete with galvanized clamping arrangement, G.I. bolts, nuts, washers etc. as required. 2.00 Nos 5000.00 Rupees Five Thousand Only 10000.00

196 21 Supply, Installation, Testing & Commissioning of Aviation Obstruction Light MIB-DX1200 as per ICAO type B, 4000 cd flashing Effective Intensity, in all complete 4.00 Nos 4000.00 Rupees Four Thousand Only 16000.00

197 22 Supply & drawing 2 run LAN Cat-6 UTP Twisted 4 pair solid cable in the existing surface/recessed steel/PVC conduit as required. Sepcs: ROHS, ETL & TIA 568 cetified,23-24 AWG(solid) copper conductor. Make : Digilink (Schnider) / Dlink/AMP 300.00 Metre 100.00 Rupees One Hundred Only 30000.00

198 23 Wiring for light point / fan point/exhaust fan point /call bell point with 1.5sq.mm FRLS PVC insulated copper conductor single core cable (Make: Gloster/ Havells/ KEI/ Polycab/ Finolex) in surface / recessed in medium class PVC conduit with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc as required with necessary inter connections, chipping the wall & replastering cement 1:3 to smooth finish complete in all respects as per site requirement and as directed by Engineer in-charge.(Switch and Socket Make: Havells /LK/ ABB/Legrand) 160.00 Point 1344.46 Rupees One Thousand Three Hundred Forty Four and Forty Five Paise 215112.96

199 24 Supplying and drawing 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/recessed PVC conduit as required. (Make: Gloster/ Havells/ KEI/ Polycab/ Finolex) 1000.00 Metre 210.66 Rupees Two Hundred Ten and Sixty Six Paise 210663.00

200 25 Supplying and drawing 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/recessed steel/PVC conduit as required. (Make: Gloster/ Havells/ KEI/ Polycab/ Finolex) 600.00 Metre 245.38 Rupees Two Hundred Forty Five and Thirty Seven Paise 147227.40

201 26 Supplying and drawing 2 X 4.0 sq. mm + 1 X 4.0 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel/ PVC conduit as required. (Make: Gloster/ Havells/ KEI/ Polycab/ Finolex) 500.00 Metre 294.30 Rupees Two Hundred Ninety Four and Twenty Nine Paise 147148.50

202 27 Supply & drawing telephone cable with high density polythene insulation paired, polyester taped nylon rip cord & gray colour sheathed with FRLS PVC insulated annealed, confirming ITD specification S/WS 113 C" size 2 pair x 0.5 mm copper conductivity Make : RR / Havells / L&T/Finolex 250.00 Metre 30.77 Rupees Thirty and Seventy Seven Paise 7692.75

203 28 Supplying and fixing of 25mm medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required (Make: Plaza/AKG/Finolex) 200.00 Metre 132.55 Rupees One Hundred Thirty Two and Fifty Five Paise 26510.40

204 29 Supplying and fixing 5/6 A modular switch on the existing modular plate & switch box including connections but excluding modular plate etc. as required. (Switch Make: Havells /LK/ ABB/Legrand) 30.00 Nos 95.47 Rupees Ninety Five and Forty Six Paise 2864.07

205 30 Supplying and fixing 2 way 5/6 A modular switch on the existing modular plate & switch box including connections but excluding modular plate etc. as required. (Switch Make: Havells /LK/ ABB/Legrand) 8.00 Nos 132.55 Rupees One Hundred Thirty Two and Fifty Five Paise 1060.42

206 31 Supplying and fixing 3/5 pin 5/6 A modular socket outlet on the existing modular plate & switch box including connections but excluding modular plate etc. as required. (Socket Make: Havells /LK/ ABB/Legrand) 30.00 Nos 107.30 Rupees One Hundred Seven and Thirty Paise 3219.12

207 32 Supplying and fixing telephone socket outlet on the existing modular plate & switch box/cover including connections but excluding modular plate etc. as required. (Make: Havells /LK/ ABB/Legrand) 10.00 Nos 132.55 Rupees One Hundred Thirty Two and Fifty Five Paise 1325.52

208 33 Supplying and fixing bell puch modular switch on the existing modular plate & switch box including connections but excluding modular plate etc. as required. (Switch Make: Havells /LK/ ABB/Legrand) 8.00 Nos 125.45 Rupees One Hundred Twenty Five and Forty Five Paise 1003.61

209 34 Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required 25.00 Nos 37.08 Rupees Thirty Seven and Eight Paise 927.08

210 35 Supplying and fixing of 1 or 2 Module (75mmX75mm)modules, GI box alongwith modular base & cover plate for modular switches in recess etc.as required. (Switch and Socket Make: Havells /LK/ ABB/Legrand) 20.00 Nos 279.31 Rupees Two Hundred Seventy Nine and Thirty Paise 5586.12

211 36 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 5 pin 5/6 amps & modular socket outlet and 5/6 amps modular switch, connections etc. as required & replastering cement 1:3 to smooth finish complete in all respects as per site requirement and as directed by Engineer in-charge. (Switch and Socket Make: Havells /LK/ ABB/Legrand) 80.00 Nos 430.01 Rupees Four Hundred Thirty Only 34400.40

212 37 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 amps & 15/16 amps modular socket outlet and 15/16 amps modular switch, connections etc. as required & replastering cement 1:3 to smooth finish complete in all respects as per site requirement and as directed by Engineer in-charge. (Switch and Socket Make: Havells /LK/ ABB/Legrand) 50.00 Nos 519.95 Rupees Five Hundred Nineteen and Ninety Five Paise 25997.55

213 38 Supplying and fixing 3 pin, 5A ceiling rose on the existing junction box/ wooden block including junction box cover, connections etc. as required. (Ceiling Rose Make: Havells /LK/ ABB/Legrand) 100.00 Nos 82.06 Rupees Eighty Two and Five Paise 8205.60

214 39 Supplying and fixing call bell/ buzzer with indicator suitable for single phase, 230 V, complete as required (Switch and Socket Make: Havells /LK/ ABB/Legrand) 8.00 Nos 88.37 Rupees Eighty Eight and Thirty Six Paise 706.94

215 40 Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required as directed by Engineer in-charge. 40.00 Nos 784.27 Rupees Seven Hundred Eighty Four and Twenty Six Paise 31370.64

216 41 Supplying and fixing of 125 Amp, breaking capacity 36KA Four Pole MCCB with thermomagnetic release and terminal spreaders in cubicle box (MCCB box) including all fixing items to be fixed like hanging, bolt & nuts. as required. Make: LK/Siemens/Legrand/Hager/Schneider/ABB 1.00 Nos 6820.12 Rupees Six Thousand Eight Hundred Twenty and Eleven Paise 6820.12

217 42 Supplying and fixing of 8 way, Double door, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/ Isolator) Make: LK/Siemens/Legrand/ Hager/ Schneider/ABB 4.00 Nos 2187.90 Rupees Two Thousand One Hundred Eighty Seven and Eighty Nine Paise 8751.59

218 43 Supplying and fixing of 4 way (4 + 12), Double door, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415V, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/ RCCB/Isolator) Make: LK/Siemens/Legrand/ Hager/ Schneider/ABB 2.00 Nos 3453.45 Rupees Three Thousand Four Hundred Fifty Three and Forty Five Paise 6906.91

219 44 Supplying and fixing of 8 way (4 + 24), Double door, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415V, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/ RCCB/Isolator) Make: LK/Siemens/Legrand/ Hager/ Schneider/ABB 4.00 Nos 4999.89 Rupees Four Thousand Nine Hundred Ninety Nine and Eighty Nine Paise 19999.57

220 45 Supplying and fixing of 5A to 32A rating 240 V, 10kA, "C" curve MCB suitable for inductive load of Single pole in the existing MCB DB complete with connections, testing and commissioning ect. As required. Make: LK/Siemens/Legrand/ Hager/ Schneider/ABB 144.00 Nos 224.87 Rupees Two Hundred Twenty Four and Eighty Six Paise 32380.56

221 46 Supplying and fixing of 5A to 32A rating 240 V, 10kA, "C" curve MCB suitable for inductive load of Double pole in the existing MCB DB complete with connections, testing and commissioning ect. As required. Make: LK/Siemens/Legrand/ Hager/ Schneider/ABB 4.00 Nos 549.14 Rupees Five Hundred Forty Nine and Fourteen Paise 2196.58

222 47 Supplying and fixing of 63A, 4P, 415 Volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning ect. As required. Make: LK/Siemens/Legrand/ Hager/ Schneider/ABB 6.00 Nos 2838.03 Rupees Two Thousand Eight Hundred Thirty Eight and Three Paise 17028.20

223 48 Supply and installing Hot Dipped Galvanised Iron cable tray size: 300 mm width X 50 mm depth X 1.6 mm thickness (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient section, joined with connectors, suspended from the celling with G.I. suspenders including G.I. bolts, nuts & angle base support etc. as required. As per site requirement or directed by EIC. 50.00 Meter 837.92 Rupees Eight Hundred Thirty Seven and Ninety One Paise 41895.90

224 49 Supply and making of earthing as per IS-3043 with Galvanised Steel earth plate electrode of size 600mm x 600mm x 6 mm thick, buried directly in ground surrounded by alternate layer of chacoal & salt as per requirement (earth pit not less than 3.50 metres deep below ground level) with top edge of the plate not less than 2.75 mtr below normal ground level, connected to galvanised iron strip 25 x 5 mm as earthing lead up to test point by means of GI bolts, nuts, check nuts and washers including testing. It includes 2.7 mtr watering GI pipe & funnel. It also includes excavation in soft soil, supply & making chamber with cement concrete ratio 1:3:6 (20 mm graded agregate) for making earth pit with painting of Yellow colour, CI hinged cover plate/pre cast reinforement cover with lifting handle to be fixed on top of the pit along with display plate of earthing value complete in all respect. 10.00 Set 6588.94 Rupees Six Thousand Five Hundred Eighty Eight and Ninety Three Paise 65889.39

225 50 Supply and making of earthing as per IS-3043 with copper earth plate electrode of size 600mm x 600mm x 6 mm thick, buried directly in ground surrounded by alternate layer of chacoal & salt as per requirement (earth pit not less than 3.50 metres deep below ground level) with top edge of the plate not less than 2.75 mtr below normal ground level, connected to copper strip 25 x 5 mm as earthing lead up to test point by means of brass bolts, nuts, check nuts and washers including testing. It includes 2.7 mtr watering GI pipe & funnel. It also includes excavation in soft soil, supply & making chamber with cement concrete ratio 1:3:6 (20 mm graded agregate) for making earth pit with painting of Yellow colour, CI hinged cover plate/pre cast reinforement cover with lifting handle to be fixed on top of the pit along with display plate of earthing value complete in all respect. 10.00 Set 11838.16 Rupees Eleven Thousand Eight Hundred Thirty Eight and Fifteen Paise 118381.56

226 51 Providing & fixing of 25 x 5 mm Galvanised Iron strip concealed as strip earth electrod, including connection / termination with 2 set GI nut, bolt, spring washer etc. on wall with insulator for earthing strip spaced not more than 1.00 meters apart (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm) as required or as per site requirement for connections etc (Test point should be protected from wall by insulated nut bolt). as required replastering cement 1:3 to smooth finish complete as directed by Engineer in-charge. 80.00 Meter 126.24 Rupees One Hundred Twenty Six and Twenty Four Paise 10099.20

227 52 Providing & fixing of 25 x 5 mm Copper strip in concealed as strip earth electrod, including connection / termination with 2 set brass nut, bolt, spring washer etc. on wall with insulator for earthing strip spaced not more than 1.00 meters apart (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm) as required or as per site requirement for connections etc (Test point should be protected from wall by insulated nut bolt). as required replastering cement 1:3 to smooth finish complete as directed by Engineer in-charge. 150.00 Meter 983.09 Rupees Nine Hundred Eighty Three and Nine Paise 147464.10

228 53 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/submain wiring/cable as required. 100.00 Nos 39.45 Rupees Thirty Nine and Forty Five Paise 3945.00

229 54 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of above upto 35 sq.mm size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required.. As per site requirement or directed by EIC. 400.00 Meter 357.42 Rupees Three Hundred Fifty Seven and Forty One Paise 142966.80

230 55 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of above 95 sq.mm and upto 185 sq.mm size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required.. As per site requirement or directed by EIC. 30.00 Meter 392.13 Rupees Three Hundred Ninety Two and Thirteen Paise 11763.99

231 56 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of above 185 sq.mm and upto 400 sq.mm size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required.. As per site requirement or directed by EIC. 125.00 Meter 445.00 Rupees Four Hundred Forty Four and Ninety Nine Paise 55624.50

232 57 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 kV grade of upto 120 sq. mm size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required.. As per site requirement or directed by EIC. 545.00 Meter 495.49 Rupees Four Hundred Ninety Five and Forty Nine Paise 270043.14

233 58 Supplying and making end termination with brass compression gland and aluminium lugs size 150 sq.mm X 3½ core PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required as per site requirement and as directed by Engineer in-charge. Lugs and Gland Make: Dowels/ action/Jainson. 10.00 Nos 629.62 Rupees Six Hundred Twenty Nine and Sixty Two Paise 6296.22

234 59 Supplying and making end termination with brass compression gland and aluminium lugs size 300 sq.mm X 3½ core PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required as per site requirement and as directed by Engineer in-charge. Lugs and Gland Make: Dowels/ action/Jainson. 10.00 Nos 1054.10 Rupees One Thousand Fifty Four and Ten Paise 10541.04

235 60 Supplying and making end termination with brass compression gland and aluminium lugs size 10 sq.mm X 4 core PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required as per site requirement and as directed by Engineer in-charge. Lugs and Gland Make: Dowels/ action/Jainson. 40.00 Nos 256.43 Rupees Two Hundred Fifty Six and Forty Two Paise 10257.00

236 61 Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor Size 120 sq.mm X 3 core cable of 11 KV grade as required as per site requirement and as directed by Engineer in-charge. Make: 3M/Global Power/ Raychem 4.00 Nos 12615.32 Rupees Twelve Thousand Six Hundred Fifteen and Thirty Two Paise 50461.28

Sub Total of Part B 6186444.73

Sub Total of Part B including GST@ 18% and Cess@ 1% 7361869.23

C PART-C (HVAC WORK)

237 1 Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc. as required :, all complete as per direction of EIC. 9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation 25.00 Mtr. 740.34 Rupees Seven Hundred Forty and Thirty Four Paise 18508.50

238 2 ,--do as per Sl. No.above but --- 19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation, all complete as per direction of EIC. 25.00 Mtr. 1895.80 Rupees One Thousand Eight Hundred Ninety Five and Eighty Paise 47395.00

239 3 INSULATED CHILLED WATER PIPING (INSIDE BUILDINGS) Supplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled water piping inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with following closed cell elastometric nitrile rubber of minimum 45 Kg / cum density, thermal conductivity 0.037 W/MK or better at 20 deg mean temperature class 'O' insulation applied by suitable adhesive complete including repairing of damage to building etc. as per specifications and as required complete in all respect. Note:- The Pipes of sizes 150mm & below shall be M.S. 'C' class as per IS : 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35mm thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above. The Pipes size 150mm & below shall be M.S. 'C' class as per IS : 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35mm thick M.S. Sheet for pipes upto 350 mm dia., all complete as per direction of EIC. 150mm dia.(32 mm thick insulation) 85.00 Rmt. 4015.22 Rupees Four Thousand Fifteen and Twenty Two Paise 341293.70

240 4 ,--do as per Sl. No.above but--100mm dia.(32 mm thick insulation), all complete as per direction of EIC. 70.00 Rmt. 2805.68 Rupees Two Thousand Eight Hundred Five and Sixty Eight Paise 196397.60

241 5 ,--do as per Sl. No.above but--80mm dia.(32 mm thick insulation), all complete as per direction of EIC. 50.00 Rmt. 2095.58 Rupees Two Thousand Ninety Five and Fifty Eight Paise 104779.00

242 6 ,--do as per Sl. No.above but--65mm dia.(32 mm thick insulation), all complete as per direction of EIC. 124.00 Rmt. 1687.67 Rupees One Thousand Six Hundred Eighty Seven and Sixty Seven Paise 209271.08

243 7 ,--do as per Sl. No.above but--50mm dia.(32 mm thick insulation), all complete as per direction of EIC. 90.00 Rmt. 1466.75 Rupees One Thousand Four Hundred Sixty Six and Seventy Five Paise 132007.50

244 8 ,--do as per Sl. No.above but--40mm dia.(32 mm thick insulation), all complete as per direction of EIC. 80.00 Rmt. 1191.39 Rupees One Thousand One Hundred Ninety One and Thirty Nine Paise 95311.20

245 9 ,--do as per Sl. No.above but--32mm dia.(19 mm thick insulation), all complete as per direction of EIC. 60.00 Rmt. 1042.27 Rupees One Thousand Forty Two and Twenty Seven Paise 62536.20

246 10 ,--do as per Sl. No.above but--25mm dia.(19 mm thick insulation), all complete as per direction of EIC. 60.00 Rmt. 875.79 Rupees Eight Hundred Seventy Five and Seventy Nine Paise 52547.40

247 11 INSULATED VALVES Supplying, fixing, testing and commissioning of following Valves, Strainers, gauges in the chilled water plumbing duly insulated to the same specifications as the connected piping and adequately supported as per specifications. BUTTERFLY VALVE 100mm dia.(MANUAL) with C I body SS Disc, Nitrile Rubber Seal & O- Ring PN 16 pressure rating for chilled water/hot eater circulation as specified, all complete as per direction of EIC. 20.00 Nos. 5903.30 Rupees Five Thousand Nine Hundred Three and Twenty Nine Paise 118065.96

248 12 Supplying, fixing, testing and commissioning of following Valves, Strainers, gauges in the chilled water plumbing duly insulated to the same specifications as the connected piping and adequately supported as per specifications. BUTTERFLY VALVE 80mm dia.(MANUAL) with C I body SS Disc, Nitrile Rubber Seal & O- Ring PN 16 pressure rating for chilled water/hot eater circulation as specified, all complete as per direction of EIC. 10.00 Nos. 4275.59 Rupees Four Thousand Two Hundred Seventy Five and Fifty Nine Paise 42755.91

249 13 Supplying, fixing, testing and commissioning of following Valves, Strainers, gauges in the chilled water plumbing duly insulated to the same specifications as the connected piping and adequately supported as per specifications. BUTTERFLY VALVE 65mm dia.(MANUAL) with C I body SS Disc, Nitrile Rubber Seal & O- Ring PN 16 pressure rating for chilled water/hot eater circulation as specified, all complete as per direction of EIC. 4.00 Nos. 4012.85 Rupees Four Thousand Twelve and Eighty Five Paise 16051.42

250 14 Supplying, fixing, testing and commissioning of following Valves, Strainers, gauges in the chilled water plumbing duly insulated to the same specifications as the connected piping and adequately supported as per specifications. BUTTERFLY VALVE 50mm dia.(MANUAL) with C I body SS Disc, Nitrile Rubber Seal & O- Ring PN 16 pressure rating for chilled water/hot eater circulation as specified, all complete as per direction of EIC. 8.00 Nos. 3650.70 Rupees Three Thousand Six Hundred Fifty and Seventy Paise 29205.62

251 15 Supplying, fixing, testing and commissioning of following Valves, Strainers, gauges in the chilled water plumbing duly insulated to the same specifications as the connected piping and adequately supported as per specifications. BALANCING VALVE WITH BUILT IN MEASURING FACILITY with C I body flanged construction with EPDM coated disc with long pitch with protected out pipe insulation & PN 16 pressure rating for chilled / hot water circulation as specified., all complete as per direction of EIC. 100mm dia. 4.00 Nos. 16747.31 Rupees Sixteen Thousand Seven Hundred Forty Seven and Thirty One Paise 66989.26

252 16 Supplying, fixing, testing and commissioning of following Valves, Strainers, gauges in the chilled water plumbing duly insulated to the same specifications as the connected piping and adequately supported as per specifications. BALANCING VALVE WITH BUILT IN MEASURING FACILITY with C I body flanged construction with EPDM coated disc with long pitch with protected out pipe insulation & PN 16 pressure rating for chilled / hot water circulation as specified., all complete as per direction of EIC. 80mm dia. 2.00 Nos. 11615.66 Rupees Eleven Thousand Six Hundred Fifteen and Sixty Five Paise 23231.32

253 17 Supplying, fixing, testing and commissioning of following Valves, Strainers, gauges in the chilled water plumbing duly insulated to the same specifications as the connected piping and adequately supported as per specifications. BALANCING VALVE WITH BUILT IN MEASURING FACILITY with C I body flanged construction with EPDM coated disc with long pitch with protected out pipe insulation & PN 16 pressure rating for chilled / hot water circulation as specified., all complete as per direction of EIC. 65mm dia. 1.00 Nos. 10416.38 Rupees Ten Thousand Four Hundred Sixteen and Thirty Seven Paise 10416.38

254 18 Supplying, fixing, testing and commissioning of following Valves, Strainers, gauges in the chilled water plumbing duly insulated to the same specifications as the connected piping and adequately supported as per specifications. BALANCING VALVE WITH BUILT IN MEASURING FACILITY with C I body flanged construction with EPDM coated disc with long pitch with protected out pipe insulation & PN 16 pressure rating for chilled / hot water circulation as specified., all complete as per direction of EIC. 50mm dia. 3.00 Nos. 9092.44 Rupees Nine Thousand Ninety Two and Forty Three Paise 27277.31

255 19 Supplying, fixing, testing and commissioning of following Valves, Strainers, gauges in the chilled water plumbing duly insulated to the same specifications as the connected piping and adequately supported as per specifications. NON - RETURN VALVE with dual plate of CI body, SS plates vulcanized NBR seal flanged end & PN 16 pressure rating as specified., all complete as per direction of EIC. 100mm dia. 6.00 Nos. 5479.61 Rupees Five Thousand Four Hundred Seventy Nine and Sixty Paise 32877.63

256 20 Supplying, fixing, testing and commissioning of following Valves, Strainers, gauges in the chilled water plumbing duly insulated to the same specifications as the connected piping and adequately supported as per specifications. NON - RETURN VALVE with dual plate of CI body, SS plates vulcanized NBR seal flanged end & PN 16 pressure rating as specified., all complete as per direction of EIC. 80mm dia. 2.00 Nos. 3803.77 Rupees Three Thousand Eight Hundred Three and Seventy Six Paise 7607.54

257 21 Supplying, fixing, testing and commissioning of following Valves, Strainers, gauges in the chilled water plumbing duly insulated to the same specifications as the connected piping and adequately supported as per specifications. NON - RETURN VALVE with dual plate of CI body, SS plates vulcanized NBR seal flanged end & PN 16 pressure rating as specified., all complete as per direction of EIC. 65mm dia. 2.00 Nos. 3398.22 Rupees Three Thousand Three Hundred Ninety Eight and Twenty Two Paise 6796.45

258 22 Supplying, fixing, testing and commissioning of following Valves, Strainers, gauges in the chilled water plumbing duly insulated to the same specifications as the connected piping and adequately supported as per specifications. Y - STRAINER of ductile CI body flanged ends with stainless steel strainer as specified. 100mm dia., all complete as per direction of EIC. 10.00 Nos. 12464.62 Rupees Twelve Thousand Four Hundred Sixty Four and Sixty Two Paise 124646.22

259 23 Supplying, fixing, testing and commissioning of following Valves, Strainers, gauges in the chilled water plumbing duly insulated to the same specifications as the connected piping and adequately supported as per specifications. Y - STRAINER of ductile CI body flanged ends with stainless steel strainer as specified. 80mm dia., all complete as per direction of EIC. 4.00 Nos. 8411.53 Rupees Eight Thousand Four Hundred Eleven and Fifty Two Paise 33646.12

260 24 Supplying, fixing, testing and commissioning of following Valves, Strainers, gauges in the chilled water plumbing duly insulated to the same specifications as the connected piping and adequately supported as per specifications. Y - STRAINER of ductile CI body flanged ends with stainless steel strainer as specified. 65mm dia., all complete as per direction of EIC. 1.00 Nos. 6820.12 Rupees Six Thousand Eight Hundred Twenty and Eleven Paise 6820.12

261 25 Supplying, fixing, testing and commissioning of following Valves, Strainers, gauges in the chilled water plumbing duly insulated to the same specifications as the connected piping and adequately supported as per specifications. Y - STRAINER of ductile CI body flanged ends with stainless steel strainer as specified. 50mm dia., all complete as per direction of EIC. 3.00 Nos. 5096.15 Rupees Five Thousand Ninety Six and Fifteen Paise 15288.45 4

262 26 Ball Valve set with a Y stainer duly insulated of the following sizes as per specifications and drawings. 40 mm dia., all complete as per direction of EIC. 4.00 Nos. 3647.06 Rupees Three Thousand Six Hundred Forty Seven and Six Paise 14588.24

263 27 Ball Valve duly insulated of the following sizes as per specifications and drawings. 40 mm dia.all complete as per direction of EIC. 4.00 Nos. 2770.59 Rupees Two Thousand Seven Hundred Seventy and Fifty Nine Paise 11082.36 5

264 28 PRESSURE INDEPENDENT BALANCING CUM CONTROL VALVE Supply, Installation, Testing and Commissioning of following sizes electronic, self-balancing, pressure independent type dynamic balancing valve with integrated 2 way modualating control valve in a single body. The actuator shall be capable of accepting upto 10V DC and upto 20mA electric signal and shall provide similar transduced feedback output to control system. Maximum close off pressure shall not be less than 6 Bar for upto 40 mm valves and 7 Bar for 65 mm & above. Valves should have pressure rating of 25 Bar minimum., all complete as per direction of EIC. 40 MM, all complete as per direction of EIC. 1.00 Nos. 26221.63 Rupees Twenty Six Thousand Two Hundred Twenty One and Sixty Two Paise 26221.63

265 29 ,--do as per Sl. No.above but--50 MM, all complete as per direction of EIC. 3.00 Nos. 28744.06 Rupees Twenty Eight Thousand Seven Hundred Forty Four and Five Paise 86232.18

266 30 ,--do as per Sl. No.above but--65 MM, all complete as per direction of EIC. 1.00 Nos. 44375.73 Rupees Forty Four Thousand Three Hundred Seventy Five and Seventy Two Paise 44375.73

267 31 ,--do as per Sl. No.above but--100 MM, all complete as per direction of EIC. 1.00 Nos. 95480.84 Rupees Ninety Five Thousand Four Hundred Eighty and Eighty Three Paise 95480.84 6

268 32 RECTANGULAR DUCT WORK FOR AC WORK Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. , all complete as per direction of EIC. 24 Gauge (thickness 0.63mm sheet) 98.00 Sqm. 939.70 Rupees Nine Hundred Thirty Nine and Sixty Nine Paise 92090.50

269 33 ,--do as per Sl. No.above but--22 Guage (thickness 0.80mm sheet), all complete as per direction of EIC. 84.00 Sqm. 1090.40 Rupees One Thousand Ninety and Thirty Nine Paise 91593.43

270 34 ,--do as per Sl. No.above but--20 Guage (thickness 1.0mm sheet), all complete as per direction of EIC. 28.00 Sqm. 1174.03 Rupees One Thousand One Hundred Seventy Four and Three Paise 32872.90

271 35 ,--do as per Sl. No.above but--18 Guage (thickness 1.25mm sheet), all complete as per direction of EIC. 28.00 Sqm. 1588.26 Rupees One Thousand Five Hundred Eighty Eight and Twenty Five Paise 44471.20 7

272 36 Supply, installation, balancing and commissioning of fabricated at site GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. 24 Gauge (thickness 0.63mm sheet) 581.00 Sqm. 957.06 Rupees Nine Hundred Fifty Seven and Five Paise 556050.12

273 37 ,--do as per Sl. No.above but--22 Guage (thickness 0.80mm sheet), all complete as per direction of EIC. 217.00 Sqm. 1116.44 Rupees One Thousand One Hundred Sixteen and Forty Three Paise 242266.40

274 38 ,--do as per Sl. No.above but--20 Guage (thickness 1.0mm sheet), all complete as per direction of EIC. 126.00 Sqm. 1460.44 Rupees One Thousand Four Hundred Sixty and Forty Three Paise 184015.31

275 39 ,--do as per Sl. No above but--18 Guage (thickness 1.25mm sheet), all complete as per direction of EIC. 77.00 Sqm. 1627.71 Rupees One Thousand Six Hundred Twenty Seven and Seventy Paise 125333.44

276 40 DUCT INSULATION Supplying and fixing of 19 mm thickness duly laminated aluminum foil of mat finish closed cell Nitrile rubber (Class "O") insulation on existing duct after applying suitable adhesive for Nitrile rubber. The joints shall be sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as per specifications and as required., all complete as per direction of EIC. 870.00 Sqm. 639.09 Rupees Six Hundred Thirty Nine and Nine Paise 556008.30 8

277 41 DUCT ACOUSTING LINING Supply and fixing of acoustic lining of supply air duct and plenum with 25 mm thick resin bonded glass wool having density of 32 kg/m³, with 25 mm X 25 mm GI section of 1.25 mm thick, at 600 mm centre to centre covered with Reinforced Plastic tissue paper and 0.5 mm thick perforated aluminum sheet fixed to inside surface of ducts with cadmium plated nuts, bolts, stick pins, CPRX compound etc. complete as required and as per specifications., all complete as per direction of EIC. Dust Acoustic Lining 245.00 Sqm. 702.21 Rupees Seven Hundred Two and Twenty One Paise 172041.45

278 42 GRILLES/DIFFUSERS/LOUVERS/VCDs/FDs Supplying & fixing of Jet nozzle drum with proper size as per dwg complete as required., all complete as per direction of EIC. 6.00 Sqm. 9420.17 Rupees Nine Thousand Four Hundred Twenty and Seventeen Paise 56521.02

279 43 Supplying & fixing of powder coated extruded aluminium Return Air Grills with louvers but without volume control dampers complete as required., all complete as per direction of EIC. 22.00 Sqm. 4958.87 Rupees Four Thousand Nine Hundred Fifty Eight and Eighty Six Paise 109095.03

280 44 Supplying, fixing testing commissioning of supply air diffusers of powder coated aluminium with aluminium volume control dampers with anti smudge ring & removable core., all complete as per direction of EIC. 28.00 Sqm. 10131.55 Rupees Ten Thousand One Hundred Thirty One and Fifty Four Paise 283683.37

281 45 Supplying, fixing testing commissioning of Return air diffusers of powder coated aluminium without volume control dampers with anti smudge ring & removable core., all complete as per direction of EIC. 28.00 Sqm. 6781.46 Rupees Six Thousand Seven Hundred Eighty One and Forty Five Paise 189880.74

282 46 Supply, installation, testing and commissioning of GI volume control duct damper complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc, as per specifications., all complete as per direction of EIC. 6.00 Sqm. 5980.62 Rupees Five Thousand Nine Hundred Eighty and Sixty Two Paise 35883.72

283 47 Supplying, Fixing,testing and commissioning of fire dampers in supply air duct/main branch and return air path as and where required of required sizes i/c control wiring,the damper shall be motorized and spring return so as to close the damper in the event of power failure automatically and open the same in case of power being restored. The spring return action shall be inbuilt mechanism and not externally mounted. The damper shall also be closed in the event of fire signal complete as required and as per specifications., all complete as per direction of EIC. Fire Damper 6.00 Sqm. 8959.09 Rupees Eight Thousand Nine Hundred Fifty Nine and Nine Paise 53754.57

284 48 ,--do as per Sl. No.above but-- Actuator, all complete as per direction of EIC. 10.00 Nos. 8398.91 Rupees Eight Thousand Three Hundred Ninety Eight and Ninety Paise 83989.05

285 49 TEMPERATURE AND RH SENSOR AND ADJUSTER PACKAGES upplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with bends , reducer and all accessories ,connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 100 mm width X50 mm depth X1.6 mm Thickness, all complete as per direction of EIC. 42.00 Mtr. 594.91 Rupees Five Hundred Ninety Four and Ninety Paise 24986.05

286 50 ,--do as per Sl. No.above but--150 mm width X50 mm depth X1.6 mm Thickness, all complete as per direction of EIC. 28.00 Mtr. 633.57 Rupees Six Hundred Thirty Three and Fifty Six Paise 17739.88

287 51 ,--do as per Sl. No.above but--300 mm width X50 mm depth X1.6 mm Thickness, all complete as per direction of EIC. 21.00 Mtr. 837.92 Rupees Eight Hundred Thirty Seven and Ninety One Paise 17596.28

288 52 CONTROL PANEL IN AIR HANDLING UNITS (AHUs) Supplying following 1.1kV grade, XLPE insulated, heavy duty armoured cables suitable for 415V, 50Hz, AC system, with inner and outer PVC sheath, galvanised steel armouring and with all components as mentioned in BOQ, specifications, complete as required. 4 Core 10 Sqmm. Alum. Armd 80.00 Nos. 202.30 Rupees Two Hundred Two and Thirty Paise 16184.00

289 53 Supplying following 1.1kV grade, XLPE insulated, heavy duty armoured cables suitable for 415V, 50Hz, AC system, with inner and outer PVC sheath, galvanised steel armouring and with all components as mentioned in BOQ, specifications, complete as required.4 Core 6 Sqmm. Alum. Armd 90.00 Rmt. 138.00 Rupees One Hundred Thirty Eight Only 12420.00

290 54 Supplying and making end termination with brass compression glands and aluminium/copper lugs as required for following size of XLPE insulated and PVC sheathed aluminium/copper conductor cable of 1.1 KV grade etc. complete as required & approved by the Engineer In Charge. 4 Core 10 Sqmm. Alum. Armd 12.00 Set 256.43 Rupees Two Hundred Fifty Six and Forty Two Paise 3077.10

291 55 Supplying and making end termination with brass compression glands and aluminium/copper lugs as required for following size of XLPE insulated and PVC sheathed aluminium/copper conductor cable of 1.1 KV grade etc. complete as required & approved by the Engineer In Charge. 4 Core 6 Sqmm. Alum. Armd 18.00 Set 16.81 Rupees Sixteen and Eighty One Paise 302.58

Sub Total of Part C 5101560.31

Sub Total of Part C including GST@ 18% and Cess@ 1% 6070856.77

Total Including GST & Welfare cess (Part A+ Part B+ Part C) Rupees Nine Crore Seventy Six Lac Four Thousand One Hundred Ninety Six and Twenty Eight Paise 97604196.28

The Tenderer has to Quote Percentage Above / Below as Specified and Percentage Shall be Quoted in Figures. Approximate Amount Put to Tender State Above or Below Quoted Percentage in Figures [Excluding GST & Welfare cess] Quoted Amount

Tenderer's Quote (Including GST & Welfare cess) 97604196.28 BELOW % 97604196.28

Note: The tenderer has to quote percentage above / below against the total amount considering the specified standard rates. If the contractor does not quote any percentage above / below on the total amount, the tender shall be treated as invalid and will not be considered.

WARNING: PLEASE ENTER PERCENTAGE QUOTE

HINDUSTAN AERONAUTICS LIMITED

ACCESSORIES COMPLEX

TRANSPORT AIRCRAFT DIVISION

CIVIL WORKS DEPARTMENT

ISSUED TO MR/MESSRS. SCHEDULE ‘A’ BILL OF QUANTITIES Sub: “Construction of Oil & Lubricant/ Chemical/ Consumable store at HAL Factory Kanpur.” Cont. No. : MW/CIV/370/1/14-15 Note : Sqm. denotes Square Meters Cum denotes Cubic Meters MT denotes Metric Tonnes Rm denotes Running Meters Ltr denotes Litres Kgs denotes Kilograms.

1. The work in general shall be carried out as per MES SSR 2010 . For item of works not covered in the SSR shall be governed as per BIS specification or as per Sound Engineering practice or as specified and directed by the Engineer-in-Charge.

2. The quoted rates shall be for the net finished work / item inclusive of cost of all necessary materials, machinery, tools and plant in all the operations described in the BOQ at all heights etc. All the required tests shall be carried out by the contractor at their cost in the presence of Engineer-in-Charge or his authorized representative and shall submitt the test results to the Engineer-in-Charge. If the test are carried out at an outside laboratory, the cost of such tests, materials, transportation, etc., shall be borne by the Contractor.

3. Contractors shall inspect the site and fully acquaint himself / themselves with the scope and nature of work, access, location and working condition. No claim will be considered later on the ground of ignorance or otherwise of the conditions under which the work will be have to be executed.

4. Contractors will be solely responsible for any accidents to workmen engaged by them during execution of work.

5 The rates quoted shall be inclusive of all taxes such as Sales Tax/VAT, Turnover Tax, Entry Tax, Service Tax (Contractor's portion as per the existing or amended rules from time to time), Sales Tax on Works Contract and all duties and levies like royalty, cess etc. HAL shall not reimbuse any taxes to the contractor under any circumstances. 5.1 RECOVERY OF SALES TAX/VAT AT SOURCE Sales Tax on works Contract will be recovered as per the rates indicated in UP Sales Tax act. The applicable sales Tax of the Gross value shall be deducted as per the provision of Law and the same will be remitted to the Tax Authorities on monthly basis. A certificate to this effect will be issued to the Contractors.

6. All materials required for the work will be contractors own supply. They shall conform to relevant IS standards and shall be of approved brand /manufacture as specified. If the specified brand/manufacture not available, then only alternative equivalent brand may be produced for approval. However, prior approval of HAL shall be taken before procurement of any material.

7. Bull dozers, power shovel, graders, loaders, Power road rollers, vibratory rollers, sheep foot rollers, and any other plant and machinery required are contractors own supply. No plant and machinery will be issued by HAL.

8.The Contractor may use Ready Mixed Concrete (R.M.C) without claiming for any extra cost subjected to satisfying the following conditions. The agency, which supplies R.M.C to be got approved by HAL.

9. For antitermite treatment and water proofing work contractor's has to furnish performance guarantee bond for five years on non judical stamp paper of Rs 100.00. Defect laibility of such items will be released after completion of guarantee period.

10. All the items shall be carried out as per the Specifications and as directred and approved by EIC.

HINDUSTAN AERONAUTICS LIMITED

TRANSPORT AIRCRAFT DIVISION-KANPUR

Sub: “Construction of Oil & Lubricant/ Chemical/ Consumable store at HAL Factory Kanpur.”

Cont. No. : MW/CIV/370/1/14-15

S.N. Description of Item Freak Item Qty. Unit Rate per unit in Figures Rate per unit in Words Amount (In Rs.)

1 Earth work in excavation in ordinary soil in trenches, not exc.1.50m depth and of any width, for foundation & other similar allied works etc. including cost of dressing / trimming sides and leveling / grading and ramming of bottoms of excavation, dewatering etc if required, getting out and return filling with excavated earth in layers of not exceeding 25cm thick including watering consolidating etc. & disposing the surplus excavated earth in the low lying area of factory within a lead of 500 mtrs etc. complete as directed &approved by EIC. (-) 275.00 Cum 100.00 Rupees One Hundred Only 27500.00

2 Providing and laying Plain cement concrete in 1:4:8 (1Cement : 4 Coarse sand: 8 stone aggregate of 40 mm nominal size) in foundation, floor or any description of work including cost of all operations such as manual / mechanical mixing, placing, compacting, scaffolding, side shuttering, curing etc . Complete as directed by EIC. 25.00 Cum 4000.00 Rupees Four Thousand Only 100000.00

3 Providing and laying brick work in walls, pillars, fascia, drain etc. in cement mortar 1:6 (1 cement : 6 coarse sand) in well burnt clay bricks, First class bricks, straight or curved in plan of any radius, in foundation and super- structure, work up to any height or depth including cost of scaffolding , raking out joints up to 1 cm depth as the work proceeds, curing etc. complete in all repect as per specification and direction of EIC. (+) 100.00 Cum 5000.00 Rupees Five Thousand Only 500000.00

4 -- do-- but half brick thick wall in CM 1:4. All complete as directed and approved by EIC. (+) 50.00 Sqm 700.00 Rupees Seven Hundred Only 35000.00

5 Providing, rendering, screeding and dubbing out plaster in cement mortar 1:3 (1cement: 3 Coarse Sand) of 5 mm thick on concrete surfaces at any height / depth of ceilings, column, beams, staircase, fins, fascia , drop etc. including trowelled to smooth and even finish without using extra cement, including cost of surface preparation, required scaffolding, curing etc. complete as directed & approved by EIC. 105.00 Sqm 150.00 Rupees One Hundred Fifty Only 15750.00

6 Extra over rendering or plastering for work in isolated widths or in widths not forming part of general plastering such as in bands, sunk panels, cornices, skirting, drip moulds and similar work not exceeding 15cm in width or grith; including cutting to edges, all mitres and stopped ends etc. all complete as directed and approved by EIC. 120.00 RM 40.00 Rupees Forty Only 4800.00

7 Supplying and fixing in position steel reinforcement (TMT bars) conforming to IS-1786-1985 of any dia of approved make such as TATA/SAIL/ISPAT/VIZAG for slabs, beams, columns, footing or any other similar description of work, including cut to length, bent to shape as required, cranking bending , spirally or hooping, hooking ends and binding with mild steel wire soft drawn of not less than 0.9 mm dia, securing with chairs, placing in position and maintaining firmly so that placing and ramming of concrete will not displace it, removing rust and scales if any, wastage, etc. complete as directed & approved by EIC (Test report of manufacturer is to be submitted along with the supply). 12500.00 Kg 62.00 Rupees Sixty Two Only 775000.00

8 Providing and laying R.C.C 1:1 1/2:3 (1Cement : 11/2 Coarse sand: 3 stone aggregate of 20 mm nominal size) for foundation, beam, columns, lintels etc. or any description of work including manual / mechanical mixing, placing, compacting, lead & lifts, curing etc . Complete as directed by EIC. 70.00 Cum 6000.00 Rupees Six Thousand Only 420000.00

9 Providing and laying Ready Mixed cement Concrete ( Design Mix M-25 grade ) in slab, floor, pavments or simlar items, RMC (Ready Mixed Cement Concrete M- 25 grade, using 20mm graded granite aggregate and consolidated with mechanically vibrated needle and surface /screed vibrators and curing. Design mix to be got approved from EIC. If any additional quantity of cement over and above the minimum quantity of 300 Kgs per Cum is required as per the design mix/trial mix to achieve the specified strength, cost of the same shall be borne by the contractor. Note: Design Mix to be got approved by EIC before the work. 70.00 Cum 7000.00 Rupees Seven Thousand Only 490000.00

10 Providing and laying Plain cement concrete 1:2:4 (1 cement :2coarse sand : 4 stone coarse 12.5mm aggregate downgraded) 25mm thick in drain foundations, floors or in any description of including manual / mechanical mixing, placing, compacting, curing scaffolding, form work finishing the surface even and smooth using extra cement all complete as directed & approved by EIC. (+) 65.00 Sqm 300.00 Rupees Three Hundred Only 19500.00

11 Supplying & fixing two track powder coated glazed Aluminium bombay sliding window all complete with outer frame of 63 x 38 x 2 mm Aluminium section and two track channel (Bottom / top &sides) of size 62 x 32 x 1.2mm, sliding shutters made of special Bombay sliding window section 38 x 19 x 1.2mm, All complete with 5mm thick float glass of MODI/ SAINT GOBAIN, edges wrapped in rubber beading, two nos roller of flyrail , including providing and fixing powder coated aluminium grill , powder coated Aluminium Handle & locking arrangement etc. all , complete with labour material, wastage etc. all complete as directed & approved by EIC. (-) 25.00 Sqm 4000.00 Rupees Four Thousand Only 100000.00

12 Providing and fixing powder coated Aluminium grill having weight not less than 2.0 Kg/m2 of approved make such as (HINDALCO/JINDAL/INDAL) of approved design to the existing outer frame of Bombay sliding window including required fittings such as 'Y' channel all around the frame for properly securing the aluminium grill including circular cutting wherever directed for provision of Air cooler, all complete with cutting wastage etc. compete in all respect as per specification and direction of EIC . (+) 5.00 Sqm 3000.00 Rupees Three Thousand Only 15000.00

13 Providing, manufacturing and erecting partly glazed and partly panelled powder coated Aluminium parititions using standard sections of JINDAL, HINDALCO or equivalent as per approved design and drawing with bottom panel of 12mm thick prelaminated exterior grade particle board of reputed manufacturers such as Archid, Kitlam, Century confirming to 12823 and top panels with 5mm thick float glass as detailed below including necessary cleats, Screws, fastners etc., a) Top, middle, vertical and bottom members -100x 44 x2mm of weight 1.519Kg / RM forming grid not exceeding 1.00 Sqmt panel as approved. b) Glass - 5.00mm thick plain float glass of MODI / SAINTGOBAIN or equivalent c) Bottom Panels 12mm thick prelaminated exterior grade in top panal particle board. d) Rubber gaskets - Good quality of approved make e) Glazing clips - Weight of 0.097Kg/RM. (+) 10.00 Sqm 3500.00 Rupees Three Thousand Five Hundred Only 35000.00

14 Providing, manufacturing & fixing partly glazed partly panelled powder coated Aluminum hinged single doors with door frame shutter of approx. size 1.00 x 2.00 m of extruded section of JINDAL/HINDALCO with door frame section 100 x 44 x 2mm, vertical members, top and middle rails of door shutter of 83 x 44 x 2mm, bottom rail of door shuter of 114 x 44 x 2mm section, fixing the door to the wall with rawplugs and screws incluiding providing and fixing MS tie rod of 8mm for the door shutter, all as directed and approved be EIC. The quoted rate shall be inclusive of supplying and fixing following fixtures for each shutter. a) Aluminium body hydraulic door closer universal type of Everite / Hardwin or equivalent. 1 No. b) Powder coated Aluminium towerbolt of 200 mm long of extruded section (ISI marked only) 2 Nos. c) -----------do -----------Aldrop 250mm long 1 No. d)Internal locks of approved make 1 No. e) Powder coated Aluminium alloy handles fabricated type American 150mm ISI marked only 2 Nos. f) Aluminium powder coated butt hinges 100 mm long ISI marked 4 Nos. g) 5mm thick float glass of MODI/ SAINT GOBAIN for the upper portion of the door with good quality rubber beadings, powder coated Aluminum glazing chips. h) 12mm thick both sided pre-laminated exterior grade particle board confirming to IS 12823 of NOVAPAN/GREENLAM/FORMICA/SANDIK/SWARAJ or equivalent (ISI marks) for the lower portion of door shutter (approx. 1.00 mtr height) using powder coated Aluminium glazing clips, beading etc.as directed & approved by EIC. 25.00 Sqm 5000.00 Rupees Five Thousand Only 125000.00

15 Supplying & fixing acid proof non skid ceramic tiles of size 400x400mm x 9 mm thick (Approx size) in floor etc of Kajaria, Johnson & Johnson, Orient Bell, Somany, Nitco make etc of first quality (tiles sample as approved by EIC) for floors including providing and laying 15 mm nominal thick cement mortar screed bedding layer of CM 1:4 ( 1 cement : 4 coarse sand ) and fixing tile with cement slurry, over the existing floor, and preparation of surface by wire brush cleaning and wetting the surface with water and spreading cement slurry, including cost of raking the joints and pointing with tinted white cement, curing, cleaning including cutting of tiles, wastage and disposal of debris at directed place etc. complete as directed by EIC. [Note:- Tile sample to be got approved by EIC before laying]. (-) 250.00 Sqm 1300.00 Rupees One Thousand Three Hundred Only 325000.00

16 Supplying and fixing glazed ceramic wall tiles of first quality of reputed manufacturers such as Kajaria, Johnson & Johnson/ Orient Bell/ Somany/ Nitco tiles in dado and skirting of size (450x350x 7)mm thick or bigger size with 10 mm thick cement mortar screed bedding layer 1:4 ( 1 cement : 4 coarse sand ) cost of raking the joints and pointing with white cement mixed with matching tint finishing wall ( matching with floor tiles colour) / make all complete as directed & approved by EIC. (+) 50.00 Sqm 1300.00 Rupees One Thousand Three Hundred Only 65000.00

17 Providing & laying ultra tiles VENTURA-T of size 300 x 300 mm of approved design and shade in Treads and laid over 15mm thick cement mortar 1:4 bedding layer jointing with cement slurry matching the shade & pointing with white cement & pigment complete with labours, material wastage etc. as directed & approved by EIC. 10.00 Sqm 1300.00 Rupees One Thousand Three Hundred Only 13000.00

18 --do-- but VENTURA-R of size 152 x 300 mm for staircase risers over 15mm thick cement mortar in CM 1:4 complete all as directed & approved by EIC. (+) 5.00 Sqm 1300.00 Rupees One Thousand Three Hundred Only 6500.00

19 Providing & applying two coats oil bound distemper of approved colour with one coat of alkali resistant primer all of approved make such as Asian / Berger/ ICI or equivalent conforming to IS 428-1969 to walls, ceiling or of any description at any height, including providing and applying Birla white/Latafinish/JK white wall putty as per requirement of site for making surface even and smooth complete with cost of all materials, labour, wastage, safety measures, scaffolding, staging etc. as directed & approved by EIC. (+) 580.00 Sqm 150.00 Rupees One Hundred Fifty Only 87000.00

20 Providing & Applying two coat of premium acrylic silicon based weather resistant exterior paint including one coat of exterior primer such as weather coat long life / weather shield / Apex of reputed manufacturer including providing and applying Birla white/Latafinish/JK white/Myklatirat wall putty @ 0.40 Kg / Sqm for making surface even and smooth. All complete with labour, material ,required scaffolding, brushes and other tools & plants required for proper completion of work cleaning the splashes from door, windows and from other surfaces etc.complete as directed & approved by EIC. (+) 500.00 Sqm 150.00 Rupees One Hundred Fifty Only 75000.00

21 Supplying and fixing 110mm PVC, SWR single socketed pipe in any length with rubber ring joint laid in trenches or in floors for soil waste of approved make such as Supreme Kisan, Finolex, Prince or equivalent Conforming to IS: 4985-2000;(Class - 4) of complete with all required necessary fittings for fixing etc. complete as directed & approved by EIC . (-) 50.00 RM 200.00 Rupees Two Hundred Only 10000.00

22 Supplying and fixing PVC (SWR) bends of 110mm with access door socketed of Supreme, kisan, Finloex, Prince (ISI make) etc complete as directed & approved by EIC. (-) 10.00 Each 100.00 Rupees One Hundred Only 1000.00

23 Sand filling under floors or in foundations including watering and consolidation, complete as directed & approved by EIC. (-) 15.00 Cum 100.00 Rupees One Hundred Only 1500.00

24 Supplying & filling with aggregates of gauge 40 to 80mm broken stone or boulders in pits/ wells in layers including lead, lift, T & P etc. complete as directed & approved by EIC. (+) 10.00 Cum 2500.00 Rupees Two Thousand Five Hundred Only 25000.00

25 Drilling of 200mm dia boring hole 2m deep from ground level in soil including all tools & machinery and disposal of spoil upto a lead of 50m within the premises of factory etc. complete as directed & approved by EIC. (+) 1.00 Each 2000.00 Rupees Two Thousand Only 2000.00

26 Drilling of boring hole 200mm dia after 2 meter depth including all tools & machinery tools and disposal of spoil upto a lead of 50m within the premises of factory etc. complete as directed & approved by EIC Rate also included for making strata chart to be made for making slots in ribbed pipe. (+) 38.00 RM 1000.00 Rupees One Thousand Only 38000.00

27 Supplying & fixing 160mm dia PVC pipe of pressure rating 6 kg/ cm2 of approved make such as Supreme / Finolex / Prince (ISI make) with socket and fittings for complete job etc. complete as directed & approved by EIC. (-) 35.00 RM 250.00 Rupees Two Hundred Fifty Only 8750.00

28 Supplying & fixing 160mm dia PVC ribbed screen sloted pipe of pressure rating 6kg/ cm2 of approved make such as Supreme / Finolex /Prince (ISI make) with socket and fittings for complete job etc. complete as directed & approved by EIC. (Slot will be made in accordance with strata chart). (-) 6.00 RM 250.00 Rupees Two Hundred Fifty Only 1500.00

29 Providing & applying flush pointing in CM 1:3 in brick wall including raking out joints complete as directed & approved by EIC. (+) 50.00 Sqm 1000.00 Rupees One Thousand Only 50000.00

30 Supplying & Fixing cast iron work grade FG 150, unmachined, in gratings and similar articles exc. 5.00kg/each and as directed by EIC. (+) 2500.00 Kg 140.00 Rupees One Hundred Forty Only 350000.00

31 Providing, rendering , screeding and dubbing out in cement mortar 1:6 (1cement: 6 graded coarse sand)10mm thick, on rough or fair faces of brick/ concrete surfaces at any height / depth on wall, ceiling, fascia, etc. including trowelled to smooth and even finish without using extra cement, including cost of surface preparation , scaffolding, curing etc. complete as directed by EIC. (+) 1000.00 Sqm 180.00 Rupees One Hundred Eighty Only 180000.00

32 Supplying & fixing non-skid ceramic tiles of approx. size 400x400mm x 7-9 mm thick in floor, of reputed manufacturers such as Kajaria, Johnson & Johnson, Orient Bell, Somany, Nitco make of first quality , including providing and laying 15 mm nominal thickness cement mortar screed bedding layer of CM 1:6 ( 1 cement : 6 coarse sand ) and fixing tile with cement slurry and preparation of surface by wire brush cleaning and wetting the surface with water and spreading cement slurry. including cost of raking the joints and pointing with tinted white cement, curing, cleaning the tiles, including cutting of tiles, wastage and disposal of debris at directed place etc. complete as directed & approved by EIC. [Note:- Tile sample to be got approved by EIC before laying]. 12.00 Sqm 1300.00 Rupees One Thousand Three Hundred Only 15600.00

33 Supplying and fixing glazed ceramic wall tiles of first quality of reputed manufacturers such as Kajaria, Johnson & Johnson/ Orient Bell/ Somany/ Nitco tiles in dado and skirting, of size (450x350x 7)mm thick with cement slurry over sub- base of 10 mm thick cement mortar 1:4 ( 1 cement : 4 coarse sand ) cost of raking the joints and pointing with white cement mixed with matching tint finishing wall ( matching with floor tiles colour) / make all complete as directed & approved by EIC. 50.00 Sqm 1300.00 Rupees One Thousand Three Hundred Only 65000.00

34 Supplying and fixing in position set of coloured Glazed Vitreous China make oval shaped counter top wash Basin of Parryware or equivalent (design & colour as approved by EIC) of size 550 x 450 mm approx. including cost of 32 mm dia CP brass waste coupling, CP swan neck pillar cock, CP angle valve, CP bottle trap all CP fittings of Parryware / Plumber or equivalent make , complete in all respect as directed & approved by EIC. (+) 2.00 Each 8000.00 Rupees Eight Thousand Only 16000.00

35 Supplying and fixing urinal partition black granite on both side finish 18 - 20mm thick machine cut of size 90 cm X 50 cm (approx.) or required size to bedded and jointed grouted on wall in CM 1:2 and finishing edges with white cement and admixture pigment to match the shade of granite stone including cutting forming, round edge beading moulded in granite with polish complete in all respect including all labour, materials, T& P as per direction of EIC. 1.50 Sqm 2500.00 Rupees Two Thousand Five Hundred Only 3750.00

36 Supplying and fixing Red granite wash basin platform 20mm thick, one side polished, machine cut of required size to accommodate two oval shape wash basins, including making oval shape opening for two W.B. as per size of wash basin providing and laying bedding mortar in CM 1:4 , 15 mm and finishing & polishing the edges of granite and pointed with pigmented white cement to match the shade of granite stone including cutting forming, round edge beading moulded in granite with polish complete in all respect including all labour, materials, T& P as per direction of EIC. (-) 1.00 Sqm 2500.00 Rupees Two Thousand Five Hundred Only 2500.00

37 Providing and Fixing coloured Vitreous Chinaware coloured new magnum Urinal of Parryware or equivalent of size 635mmX395mmX420mm complete with providing and fixing plugs, bedding urinals in wall in cement mortar 1:2 ( 1 cement : 2 coarse sand), securing urinals to plugs with 60 mm long S.S screws, pointing around urinals back in cement. Complete with the following system:- (a) Providing & fixing 50mm PVC Pipe supreme make or equivalent about 750mm long concealed vertically in wall & reparing the wall with CM (1:3). (b) Providing & fixing CP Brass waste couplings and jointing with waste pipe & put in concealed pipe. (c) Providing & fixing 15mm CP Brass half turn fancy flush cock, to water line including all fittings fixture with CP Cover plate. (d) Providing & fixing CP spreader of make Parryware or equivalent 15mm dia with CP Pipe connector to urinal, all complete with required fitting & fixture T- elbow, Grating of C.P. Union, jointer connector etc. for proper functioning of urinal complete in all respect as directed & approved by EIC. (+) 3.00 Each 8000.00 Rupees Eight Thousand Only 24000.00

38 Supplying & Fixing in position coloured European Water Closet of vitreous china with 'P' or 'S' trap left or right bent of Parryware make or equivalent as per direction of EIC, with plastic seat cover and lid fixed with CP brass hinges and rubber buffers. Fixing of 10 litre capacity Plastic flushing cistern of Parryware Deluxe model make complete with all accessories such as inlet, ball valve, float, 15 mm dia PVC pipe connection,40 mm dia PVC flush pipe bent to shape with necessary connections, fittings and clamps PVC connection with union 15 mm dia overflow pipe with specials, providing and fixing 15 mm dia GI connections, GI over flow pipe with specials including cutting chases and finishing in walls after embedding of pipes , floors etc , where required with Cement mortar 1:3 ( 1cement: 3coarse sand )all complete including cost of painting of brackets( with red oxide primer and two coat of synthetic enamel paint). 1.00 Each 7000.00 Rupees Seven Thousand Only 7000.00

39 Supplying & Fixing factory made PVC solid panel door shutter 30 mm thick of approved manufacturer such as Rajshri Plastiwood/ Syntex/Polypan or equivalent brand factory made solid panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mmx19 mm for stiles & 15 mm x 15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame shall be covered with 5 mm thick heat moulded Rajshri /Syntex/Polypan PVC 'C' channel of size 30x50 mm forming stiles, and 5 mm thick, 75 mm wide PVC sheets for top rail, lock rail & bottom rail on either side, and 10mm (5mmx2) thick, 20mmwide cross PVC sheet as gap insert for top rail & bottom rail. Panelling of 5 mm thick PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with 30 mm wide x5mm thick PVC sheet beading on either side, and join together with solvent cement adhesive.. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' channel using PVC solvent cement adhesive etc. complete as per direction of E -I-C, manufacturer's specification & drawing. Including all fittings such as aluminum tower bolt 150mm long 2 Nos.: Sliding door bolt 200mm long 1No & aluminum handle 100mm long 2no in each shutter as directed & approved by EIC. 4.20 Sqm 2800.00 Rupees Two Thousand Eight Hundred Only 11760.00

40 Supplying & Fixing factory made polyvinyl chloride (PVC) Door Frame of approved manufacturer such as Rajshri Plastiwood / Syntex/ Polypan of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet, mitre cut at two corners and joined with 2 nos. of 150 mm long brackets of 15x15mm M.S. Square tube. The two vertical door profiles are to be reinforced with 19x19 mm M.S. Square tube of 19 gauge,EPDM rubber gasket weather seal to be provided through out the frame. The door frame shall be fixed to the wall using 65/100 mm long M.S. Screws through the frame by using PVC fasteners. A minimum of 4 nos. of screws to be provided for each vertical member & minimum 2nos. For horizontal member etc. complete as per manufacturers specification and direction of EIC. 15.00 Rm 500.00 Rupees Five Hundred Only 7500.00

41 Supplying & Fixing in position tilling /adjustable type LOUVERS of size 600 x 600mm, Louver strip fixed over aluminium frame made of powder coated aluminium section of 63 x 38 x 2mm and fixing of 3.00mm thick and 100 mm wide pinheaded glass strip etc. Complete as directed and approved by EIC. (-) 2.00 Each 200.00 Rupees Two Hundred Only 400.00

42 Supplying & Fixing Aluminium powder coated barrel tower bolt 200 mm long size of extruded section of approved qualtiy (ISI mark) with all accessories which is required and complete in all respect as directed & approved by EIC. (+) 6.00 Each 200.00 Rupees Two Hundred Only 1200.00

43 Supplying & Fixing Aluminum powder coated 150 mm long Handles (dull finish cast type of good quality having ISI mark) to each door shutter all complete as directed & approved by EIC. (+) 6.00 Each 125.00 Rupees One Hundred Twenty Five Only 750.00

44 Providing and fixing medium weight, cold rolled steel Butt hinges of 100 mm size fixed with screws for doors, windows etc. all complete with labour, material and fixing to wooden / MS frame, making cut outs in wooden frame for fixing hinges etc. complete as directed by EIC. 12.00 Each 50.00 Rupees Fifty Only 600.00

45(a) Supplying and Fixing of CP brass two way bib cock for 15 mm dia pipe of Plumber / GEM / L&K or equivalent approved make, including jointing with water supply lines, complete as directed by EIC . (+) 2.00 Each 1700.00 Rupees One Thousand Seven Hundred Only 3400.00

(b) Supplying and Fixing of CP brass long body fancy type bib cock for 15 mm dia pipe of Plumber / GEM / L&K or equivalent and approved make, including jointing with water supply lines, complete as directed by EIC . (+) 2.00 Each 1000.00 Rupees One Thousand Only 2000.00

46 Supplying and fixing of CP brass angle cock / valves of Plumber / GEM / L&K make for 15 mm dia pipe including jointing with water supply line and all complete operation for fixing including required accessories etc. complete as directed by EIC. (+) 3.00 Each 700.00 Rupees Seven Hundred Only 2100.00

47 Supplying and fixing 580 x 440 mm light coloured glaze porceline Indian water closet (Orissa Pattern) confirming to IS:2556 of make parryware or equivalent with'P' or 'S' trap with or without vent set, including supplying and fixing 10 Ltrs. Capacity valve less syphonic action type low level PVC cistern confirming to IS : 774, with brackets, 40mm dia PVC waste pipe with coupling, 15mm dia high density PVC inlet pipe connection, 15mm dia CP angle cock of parry ware all above of approved make, colour etc complete as approved, specified and directed by the EIC. (-) 1.00 Each 3000.00 Rupees Three Thousand Only 3000.00

48 Supplying and fixing of good quality bevelled edge looking mirror of 5mm thickness of approved manufacturer such as Modi Atul , saint -gobain etc of any size with AC Sheet backing and 1" wooden beading all round edges, all complete as per direction of EIC. (+) 0.90 Sqm 1000.00 Rupees One Thousand Only 900.00

49 (a) Supply & fixing of G.I. water tubing 15 mm dia (Galvanized Iron) TATA/ JINDAL/ ZENITH make of medium grade in required lengths with screwed socket joints, together with all tube, fittings (Such as bends, elbows, tees, short pieces, connectors back-nuts, diminishing pieces, caps, plugs and unions etc.) and fixing complete with clips, wall hooks, wooden plugs at suitable intervals including cost of cutting through walls, floors / roofs etc and their making good, laying in trenches etc. Also for cutting, screwing and waste, and for making forged bends on piping as required, connectors shall be inserted, where required or as directed by EIC. 28.00 RM 180.00 Rupees One Hundred Eighty Only 5040.00

(b ) ---do as above but 25 mm dia. (-) 6.00 RM 225.00 Rupees Two Hundred Twenty Five Only 1350.00

50 Supplying and fixing C.P Liquid soap Dispenser of any approved make/ branded hand push types including all fixing accessories and operations etc. complete as directed & approved by EIC. (-) 1.00 Each 300.00 Rupees Three Hundred Only 300.00

51 Supplying and fixing PVC floor trap 75 mm dia. of approved make such as supreme / Finolex/ Kisan/ Prince (ISI mark)with grating including jointing to waste PVC pipes with cement concrete 1:2:4 etc. complete as directed & approved by EIC. (-) 4.00 Each 200.00 Rupees Two Hundred Only 800.00

52 Supplying and fixing 110mm/ 75mm PVC, SWR single socketed pipe in any length with rubber ring joint fixed to walls, laid in trenches, under floor for soil waste of approved make such as Supreme Kisan, Finolex, Prince or equivalent Conforming to IS: 4985-2000;(Class - 4) complete with all required necessary fittings for fixing etc. complete as directed & approved by EIC for following dia. pipes

(a) 110 mm dia. (-) 3.00 RM 250.00 Rupees Two Hundred Fifty Only 750.00

(b) 75 mm dia. 10.00 RM 200.00 Rupees Two Hundred Only 2000.00

53 Supplying and fixing PVC (SWR) Junction single 'T' equal or unequal with access door for following dia. of Supreme, Kisan, Finolex, Prince (ISI make) etc. complete as directed & approved by EIC.

(a) 110 mm dia. (-) 2.00 Each 200.00 Rupees Two Hundred Only 400.00

(b) 75 mm dia. 4.00 Each 150.00 Rupees One Hundred Fifty Only 600.00

54 Supplying and fixing PVC (SWR) bends of any radius with access door for following dia. of pipes of Supreme, kisan, Finloex, Prince (ISI make) etc complete as directed & approved by EIC.

(a) 110 mm dia. 2.00 Each 200.00 Rupees Two Hundred Only 400.00

(b) 75 mm dia. 4.00 Each 150.00 Rupees One Hundred Fifty Only 600.00

55 Supplying and Fixing PVC(SWR) reducer 110 x 75 mm of Supreme, kisan, Finolex, Prince make etc. complete all as directed & approved by EIC. (+) 1.00 Each 150.00 Rupees One Hundred Fifty Only 150.00

56 Supplying and Fixing PVC(SWR) vent cowls 75 mm dia of Supreme, kisan, Finloex, Prince (ISI make) etc. complete all as directed & approved by EIC. (+) 1.00 Each 125.00 Rupees One Hundred Twenty Five Only 125.00

57 Supplying and fixing PVC water tanks of make Sintex/ Polycon/ Tirupati / Supreme rotational moulded polythelene water storage tanks 1000 Ltr. cylindrical vertical with closed top hoisted and fixed to position, three layer body, including providing and fixing PVC ball cock, tank connection and all required G.I. fittings etc. complete as directed and approved by EIC. (+) 1.00 Each 9000.00 Rupees Nine Thousand Only 9000.00

58 Providing and fixing to chowkhat 30 mm thick, single leaf, factory made flush door shutter conforming to IS- 2202( Part-I)-1983, of G-door, Minar, Swastik, Shatabadi make and ISI marked, solid core construction, with block board core and commercial types veneers face on one sides and other face is covered with decorative face veneer with lipping/frame to match etc. complete , flush door shall be free from twist or wrap in plane etc. including provision of suitable blocks for interlocks, latches or other fittings etc. complete as directed & approved by EIC. (+) 2.50 Sqm 2800.00 Rupees Two Thousand Eight Hundred Only 7000.00

59 Providing and fixing CP Brass health faucet with telephonic arrangement and hook etc. of Plumber / GEM / L&K/ or any other equivalent make complete with required fittings & accessories as per direction of EIC. (+) 1.00 Each 1100.00 Rupees One Thousand One Hundred Only 1100.00

60 Supplying & fixing C.P Bottle trap of Plumber / GEM / L&K or any other equivalent brand etc. complete and approved by EIC. 3.00 Each 1100.00 Rupees One Thousand One Hundred Only 3300.00

61 Supplying erection & fixing of sliding door of aluminium powder coated of vertical, top middle & bottom rails of section 100 x 44 x 2mm and stiles of Sec. 83 x 44 x 2mm including supplying & fixing of top panel with 5mm with figured glass, pinhead type & bottom panel with 12mm botttom pre-laminated board including cost of handle, lock, glazing clip, rubber beading, G.rails and sliding roller for sliding door Complete as directed & approved by EIC. 2.50 Sqm 4000.00 Rupees Four Thousand Only 10000.00

62 Supplying, fabricating and fixing Stair (framed) including stringers, treads, landing, railings, balusters, hand rails etc. including cleats, brakets, etc. including one coat of red oxide primer providing metal putty and sand papering for making the surface smooth and two coat of first quality synthetic enamel paints, complete all as directed & approved by EIC. 4500.00 Kg 100.00 Rupees One Hundred Only 450000.00

63 Providing, centring & shuttering for the sides and soffits of suspended slabs, lintels, beams, floor slabs, landing and similar work of any description, in required shape and size, with true line & plumb etc. with plywood, MS plates shuttering including oiling of the top surfaces of shuttering , all supports with MS or wooden braces, struts, balli, etc, including working scaffoldings, ladders, gangways as required, including removal of formwork & centring after the stripping period as described in MES-SSR- part-I & IS 456 2000 , etc complete as directed and approved by EIC. 550.00 Sqm 250.00 Rupees Two Hundred Fifty Only 137500.00

Amount in Rs. 4699675.00

Amount in words:- Fourty Six Lakh Ninty Nine Thousand Six Hundred Seventy Five Only.

TECHNICAL BID Appendix ‘A’

NAME OF WORK: Infrastructure Development for Level-D Full Flight Simulator (FFS) for Hindustan-228 Aircraft and its Training Facility at TTI Campus, HAL – TAD, Kanpur. CA. No. MW/CIV/995/1/25-26

PRE-QUALIFICATION DETAILS OF APPLICANTS

Note: May Enclose a separate sheet along with Annexures name and Enclosure No., if space provided below is not sufficient. Write the details in the yellow shaded portion only.

Section 1: Applicant’s Particulars

Name of the Individual / Firm / Company:

Constitutional or Legal Status of the firm

Registration Number From ROC (If any): Registering Authority Date of Registration

Registered Address:

Contact Person Name & Designation:

Address for correspondence:

Tel. No. Fax No.

Mobile No. Email Address:

(This declaration should be completed by a proprietor, partner, director or other senior manager who has the authority to do so.)

‘I accept the HAL terms & conditions for this contract and declare that the particulars shown herein are true & correct in every detail.’

Signature : …………………………………………

Details of persons holding the power of Attorney [If different from above]

(Attach, attested copy of Notarized Power of Attorney)

Name…..………………………… Tel. No. (……..) ………………… Mobile No.……………………Position: ………………………

Note:-Tenderer are requested to download and upload this page after signing.

Section 2: Applicant’s Profile

2.1(a) Type of Ownership: (Write' Yes' in the appropriate Box)

(i) Individual / Partnership (iii) Pvt. Ltd. / Public Ltd.

(ii) PSU / Govt. Undertaking (iv) Research Institute / Trust

Others, please specify

2.1(b) Registration of the Firm is available with:

Company Registration Number Dated Validity Value of Contract for which Registered Class / Type of Registration

HAL or its Division

Central/State Govt.

Others (if any) (Specify).

Upload necessary certificates from the registering authorities (with Enclosure No.).

2.2 List the names of Owners / Partners / Promoters and Directors/Company Secretary / Holder of power of Attorney, as applicable, in the format detailed below (If space below is not sufficient,then upload additional sheet with enclosure No.)

Name of the owners/ Partners/ Promoter & Directors / Company Secretary/Holder of power of Attorney Address Whether owner/ Partners/ Promoter & Directors / Company Secretary/Holder of power of Attorney Extent of share holding in the Firm/Company as the case may be

2.3 Qualifications and Experience of key Management and Technical Personnel. (Upload biographical data with enclosure No.)

Position Name Qualifications Years of Experience (general) Years of Experience in the position of assignment Membership of Professional bodies associations etc.,

2.4 Company’s Total Technical personnel by Discipline:

Discipline Number of Personnel Discipline Number of Personnel

Graduate Civil /Electrical/Structural Engineers / Architect

Diploma Civil/Electrical Engineers

Sanitary Engineers

Total Personnel Total Personnel

2.5 Company’s Memorandum of Association and Articles of Association to be enclosed. Board resolution paper may be enclosed along with the memorandum of association. (Write Enclosed/Not Enclosed)

Section 3: Financial Details

3.1 Bank(s) details:

Will you authorize your Bank/s to supply HAL with a reference as to your financial position, if required? (Write Yes / No opposite in Box)

Name of Bank (Scheduled Commercial Bank) & Branch

Name and Designation of Contact person:

3.2 Give a list of work with contracts value of similar nature over the last seven years (From 01.05.2019 to 30.04.2026) in the following format starting with maximum value and in descending order. (Attach seaparate sheet in the same format if space below is not sufficient with Enclosure no.and upload it).

Project Name Name of Employer Description of work Contract No. Value of construction (Rs. In Lakhs) Date of issue of work order Stipulated period of completion Actual date of completion

3.3 Attach the following audited financial statements as applicable, for the past three financial years ending 31-03-2025 and write the values in the appropriate column as confirmation of having enclosed the appropriate documents with the application.

Profit/Loss Statement

Balance sheet (Write Enclosed/Not Enclosed)

3.4 Information on litigation history, in which the Bidder is involved (Write Yes / No in Col. 5).

Other party (ies) (Dispute involved with) Name of Employer Cause of dispute Amount involved. Remarks showing present status.

Write Details Attached / Not attached (if Yes).

3.5 In the last 5 years, has your firm, or any firm with which any of your company’s owners, officers, partners were associated, been debarred, disqualified, removed, blacklisted or otherwise prevented from bidding or completing any contract? (Write Yes / No).

If yes, state the project and the basis for the action.

3.6 At any time in the last five years, has your firm been assessed for and paid liquidated damages after completion of a project under a construction contract? (Write Yes / No ).

If yes, give details in following format:

Project Name Name of Employer and Address Date of Completion of The Project Amount of Liquidated Damages (In Rupees) Other information necessary to fully explain the assessment of liquidated damages (Write Attached / Not Attached).

Scheduled Actual Assessed Paid

Write Details Attached / Not attached

3.7 Is the individual / sole proprietor / any partner / directors of company: Put Yes / No (As Applicable)

(a) Dismissed Government Servant

(b) Removed from approved list of Construction agency

(c) Demoted to a lower class of Construction agency

(d) Having business banned / suspended by any Government in the past

(e) Convicted by a court of law

(f) Retired engineer / official from engineering department of Govt. of India within last two years.

(g) Director or partner of any other company / firm enlisted with CPWD or any other department

(h) Member of parliament or any state Legislative assembly

3.8 Please furnish the documentary proof/details of the following [Write Documentary Proof/details Enclosed/Not Enclosed]

a) Copy of PAN / GIR No. Registration Certificate issued by income Tax Authority

b) Certificate of GSTIN

c) Income Tax Returns for the last three years

d) Plant & Machinery details for the work

e) Proposed work completion schedule in the form of bar-chart

f) Bank balance statement for the last three months

g) Overdraft facilities available with the agencies

h) Balance sheet for the last five years

Section 4 – Pre-qualification Category

4.1 Solvency for a minimum value of Rs. 390.42 Lakh issued within a period of 12 months from the final date of submission of tender. i.e on or after 12.05.2025. (Upload It with enclosure No.)

Name of Bank & Branch Bank’s Reference and Date Value Rs. In Lakh

4.2 Annual turnover in the past 3 years ending 31-03-2025.

Note:- The annual turnover should be supported with audited financial statements of the concerned year with UDIN no. The average annual turnover for the last three years (starting from 2022-23 onwards) as above should not be less than 30%(Thirty) (Rs. 292.81 Lakh) of the estimated cost as indicated in the tender document. It is mandatory to furnish all the three year annual turnovers failing which tender are liable to be rejected.

Year Annual Turnover (Rs. In Lakh) Average Annual Turnover for last three Years ( Rs. In Lakh)

4.3.Bid-Capacity calculation of The Firm-The bid capacity shall be worked out as one of their eligibility criteria. Price Bid shall be opened only for those bidders who are found to have the available bid capacity more than the total bid value. [Amount put to tender shall be considered as required bid value]. The bid capacity shall be worked out as (Bid-Capacity= 2*A*N-B);

Where, A = Maximum Annual Turn-over in last Five Years escalated at current level @ 10% per annum.

B = Existing commitments on hand during the currency of the present contract.

In order to calculate (B), the firm has to furnish the details of work in hand for upto year ending on April - 2026 in the following format; (May enclose in a separate sheet in the same proforma, if space below is not sufficient and upload it with enclosure no.). Concealment of any information are liable for rejection.

Sl.No. Name of the work in hand Amount put to tender as per NIT Amount of contract Date of agreement Agreed date of completion Probable date of completion Agreed progress April - 2026 (In % age of Completion) Actual progress till April - 2026 (In % age of Completion) Name of Organizationwith address

Note:- (i) Not to change the proforma given above. Any change in above proforma is liable for rejection of tender.

(ii) Please furnish Work–order in support for the work in hand.

4.3 (a) Annual turnover in the past 5 (Five) years ending 31.03.2025 or Bid-Capacity Calculation.

Note:- The annual turnover should be supported with audited financial statements of the concerned year.

Year Annual Turnover (Rs. In Lakh)

4.4 Experience details [Proof may be uploaded also]

Experience of having successfully completed similar works during last seven (07) years (From 01.05.2019 to 30.04.2026)) should either of the following. (a) ONE similar completed work costing not less than 80% Rs. 780.84 Lakh of the amount put to tender.

S. No. Name of the Work Date Of Completion Completed Cost(INR In Lakh) Completion Certificate [Mandatory] Write Enclosed / Not Enclosed Name, address & Phone no. of the client

Note: Completion certificate issued by the client should contain value of the work, date of completion duly supported by agreement copy & work order copy .TDS certificate is to be enclosed in case the client is a private firm. Tender offer shall be liable for REJECTION if the tenderer has not furnished the Completion certificate.

(b) TWO similar completed works costing not less than 50% Rs. 488.02 Lakh of the amount put to tender

S. No. Name of the Work Date Of Completion Completed Cost(INR In Lakh) Completion Certificate [Mandatory] Write Enclosed / Not Enclosed Name, address & Phone no. of the client

Note: Completion certificate issued by the client should contain value of the work, date of completion duly supported by agreement copy & work order copy. TDS certificate is to be enclosed in case the client is a private firm. Tender offer shall be liable for REJECTION if the tenderer has not furnished the Completion certificate.

(c) THREE similar completed works costing not less than 40% Rs. 390.42 Lakh of the amount put to tender

S. No. Name of the Work Date Of Completion Completed Cost(INR In Lakh) Completion Certificate [Mandatory] Write Enclosed / Not Enclosed Name, address & Phone no. of the client

Note: Completion certificate issued by the client should contain value of the work, date of completion, duly supported by Work-order copy & agreement copy. TDS certificate is to be enclosed in case the client is a private firm. Tender offer shall be liable for REJECTION if the tenderer has not furnished the Completion certificate.

Similar Works- Experience in carrying Construction of new building & infrastructure works including Civil, Electrical & HVAC works. shall be considered as similar works.

4.5. I/We declare and confirm that -

a. All information and attachments submitted in this application are true and correct.

b. I/We are aware that any false information provided herein will result in the rejection of my application and suspension of any registrations granted.

c. I/We shall not make refund claims of expenditure incurred in processing this application.

4.6 I/We enclose herewith a pay order / banker’s draft number: drawn on Bank:

for Rs. as EMD for Tender.

Branch & address Name

Date: Designation:

Signature of Applicant / Contractor holding power of attorney

Note:-Tenderer are requested to download and upload this page after signing.