Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.7 LAccepted-AOC C O MADAN MOHAN BUILDING TOTU SHIMLA 11 TEH DISTT SHIMLA | SHIMLA | HIMACHAL PRADESH | 171001 | L1 | Accepted-AOC L1 | |
| 2 | L2₹5.9 L+₹20,874 (3.69%)Rejected-AOC NA | L2 | Rejected-AOC L2 | |
| 3 | Not Admitted-Fee/PreQual/Technical 00 AGRA AGRA UTTAR PRADESH 282001 | AGRA | UTTAR PRADESH | 282001 | - | Not Admitted-Fee/PreQual/Technical Others-documents not submitted physically on schdulen date and time | |
| 4 | Not Admitted-Fee/PreQual/Technical | - | Not Admitted-Fee/PreQual/Technical Others-Documents not physically submitted on schedule date and time |
| Sl No | Description | Qty | Unit | Suman Verma L2 | shashikant L1 |
|---|---|---|---|---|---|
| 1.00 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas in all width and depth on plan) including getting out and disposal of excavated earth all leads, lifts and carriage of material as directed by the Engineer-in-charge .a). Ordinary rock | 8.89 | Cubic Metre | 350 ₹3,111.5 Lowest | 350 ₹3,111.5 Lowest |
| 2.00 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth etc. complete in all respect as per satisfaction of Engineer-in-Charge.. | 57.55 | Square Metre | 650 ₹37,407.5 Lowest | 650 ₹37,407.5 Lowest |
| 3.00 | Providing and fixing 1st quality jointless ceramic glazed floor tiles (Kazaria / Nitco / Oreintbell make) conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dado over 12 mm thick bed of cement Mortar 1:3 (one cement: three sand) and jointing with grey cement slurry @ 3.3Kilogram per Square Metre including pointing in white cement mixed with pigment of matching shade etc. complete in all respect as per satisfaction of Engineer-in-charge. | 25.2 | Square Metre | 1,300 ₹32,760 | 1,200 ₹30,240 Lowest |
| 4.00 | Grouting the joints of flooring Kota/tiles 300 into 300mm size having joints of 3 mm width in different size of tiles/ Kota stone, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing etc. complete as per the satisfaction of Engineer-in-charge. | 31.32 | Square Metre | 200 ₹6,264 Lowest | 200 ₹6,264 Lowest |
| 5.00 | Providing and laying rectified jointless Ceramic floor tiles (Kazaria / Oreint bell / Nitco/ Somany make) of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (one Cement : four sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc complete in all respect as per satisfaction of Engineer-in-Charge. | 31.32 | Square Metre | 1,350 ₹42,282 | 1,250 ₹39,150 Lowest |
| 6.00 | 15 mm (fifteen milimetre thick) cement plaster on rough side of single or half brick wall of mix with cement mortar 1:6 (one cement: six sand) complete in all respect as per satisfaction of Engineer-in-Charge. | 86.4 | Square Metre | 300 ₹25,920 Lowest | 300 ₹25,920 Lowest |
| 7.00 | Painting with synthetic enamel paint of approved brand and manufacture of required color to give an even shade etc. in all respect as per satisfaction of Engineer-in-Charge..a) One or more coats on old work | 1,110 | Square Metre | 80 ₹88,800 | 70 ₹77,700 Lowest |
| 8.00 | Distempering with 1st quality acrylic washable distemper (ready made) of Approved manufacturer and of required shade and colour complete. as per Manufacturer’s specification etc. complete in all respect as per satisfaction of Engineer-in-Charge.. a) One or more coats on old work | 2,214 | Square Metre | 48 ₹1,06,272 | 45 ₹99,630 Lowest |
| 9.00 | Finishing walls with Acrylic Smooth exterior paint of Required shade etc. in all respect as per satisfaction of Engineer-in-Charge. a). Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface . | 1,118 | Square Metre | 100 ₹1,11,800 Lowest | 100 ₹1,11,800 Lowest |
| 10.00 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in- Charge. a).With cement mortar 1:4 (one cement : four sand) | 21.72 | Square Metre | 350 ₹7,602 Lowest | 350 ₹7,602 Lowest |
Tender Value
₹4.0 L
EMD Value
₹8,000
Closing Date
7 Aug 2025, 10:00 amClosed
EE (C)
o/o Estate organization UHF Nuni Solan
Renovation of Gayatri International Hostel NRI Girls Hostel at Dr. YSP UHF Nauni Solan
2025_YSPU_111309_1
UHF/Const-1/Partfile/2025/1308
Open Tender
Civil Works
Item Rate
120 days
Nauni Solan
Please refer Tender documents.
4 documents required · 4 mandatory
₹700
EE
₹8,000
23 Sept 2025
30 Jul 2025
7 Aug 2025
30 Jul 2025
7 Aug 2025
30 Jul 2025
Amount
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas in all width and depth on plan) including getting out and disposal of excavated earth all leads, lifts and carriage of material as directed by the Engineer-in-charge .a). Ordinary rock
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth etc. complete in all respect as per satisfaction of Engineer-in-Charge..
Providing and fixing 1st quality jointless ceramic glazed floor tiles (Kazaria / Nitco / Oreintbell make) conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dado over 12 mm thick bed of cement Mortar 1:3 (one cement: three sand) and jointing with grey cement slurry @ 3.3Kilogram per Square Metre including pointing in white cement mixed with pigment of matching shade etc. complete in all respect as per satisfaction of Engineer-in-charge.
Grouting the joints of flooring Kota/tiles 300 into 300mm size having joints of 3 mm width in different size of tiles/ Kota stone, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing etc. complete as per the satisfaction of Engineer-in-charge.
Providing and laying rectified jointless Ceramic floor tiles (Kazaria / Oreint bell / Nitco/ Somany make) of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (one Cement : four sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc complete in all respect as per satisfaction of Engineer-in-Charge.
15 mm (fifteen milimetre thick) cement plaster on rough side of single or half brick wall of mix with cement mortar 1:6 (one cement: six sand) complete in all respect as per satisfaction of Engineer-in-Charge.
Painting with synthetic enamel paint of approved brand and manufacture of required color to give an even shade etc. in all respect as per satisfaction of Engineer-in-Charge..a) One or more coats on old work
Distempering with 1st quality acrylic washable distemper (ready made) of Approved manufacturer and of required shade and colour complete. as per Manufacturer’s specification etc. complete in all respect as per satisfaction of Engineer-in-Charge.. a) One or more coats on old work
Finishing walls with Acrylic Smooth exterior paint of Required shade etc. in all respect as per satisfaction of Engineer-in-Charge. a). Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface .
Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in- Charge. a).With cement mortar 1:4 (one cement : four sand)
Renewing glass panes, with wooden fillets wherever necessary complete in all respect as per satisfaction of Engineer-in-Charge. a) Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm)
Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge.
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within all leads etc. complete in all respect as per satisfaction of Engineer-in-Charge. a) Area 3 sq. metres and below.
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within all leads etc. all complete as specified and as directed by the Engineer-in-Charge a). For thickness of tiles 10mm to 25mm
Cutting holes up to 30x30 cm in walls including making good the same with common burnt clay F.P.S. (non modular) bricks complete in all respect as per satisfaction of Engineer-in-Charge.
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required complete in all respect as per satisfaction of Engineer-in-Charge (Cera/ Hindware make). a) W.C. pan with ISI marked white solid plastic seat and lid.
Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete in all respect as per satisfaction ofEngineer-in-charge(Finolex/Kisan/D-plast/Prayagmake)a) 110mmx75mm
Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete in all respect as per satisfaction of Engineer-in-charge (Finolex/Kisan/D-plast/Prayag make).
a). 75mm (Seventy five millimetre) dia
b).. 110mm (One hundred ten millimetre) dia
Providing and fixing PVC single equal branch with oval access door, ISI marked insertion rubber washer 3mm thick bolts and nuts complete including fixing with approved adhesive etc. complete in all respect as per satisfaction of Engineer-in charge (Finolex/Kisan/D-plast/ Prayaga make).
a). 75mm (Seventy five millimetre) dia
b).. 110mm (One hundred ten millimetre) dia
Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc. complete in all respect as per satisfaction of Engineer-in-charge (Finolex/Kisan/D-plast/Prayag make).
a). 75mm (Seventy five millimetre) dia
b).. 110mm (One hundred ten millimetre) dia
Providing and fixing PVC plain bend ISI marked complete including fixing with approved adhesive etc. complete in all respect as per satisfaction of Engineer-in-charge (Finolex/Kisan/D-plast/Prayag make).
a). 75mm (Seventy five millimetre) dia
b).. 110mm (One hundred ten millimetre) dia
Providing and fixing PVC clamps ISI marked of approved design with steel screws and rawl plugs etc. complete in all respect as per satisfaction of Engineer-in-charge (Finolex/Vectus/D-plast/ Prayag make).
a). 75mm (Seventy five millimetre) dia
b).. 110mm (One hundred ten millimetre) dia
Providing and fixing PVC door bend with oval access door, insertion rubber washer 3mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete in all respect as per satisfaction of Engineer-in-charge (Finolex/Kisan/D-plast/ Prayag make).
a). 75mm (Seventy five millimetre) dia
b).. 110mm (One hundred ten millimetre) dia
Suman Verma (BID ID -541877)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .