Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.1 LAccepted-AOC WZ 576 577 NANGAL RAYA NEW DELHI 110046 | NEW DELHI | NEW DELHI | DELHI | 110046 | L1 | Accepted-AOC L1 | |
| 2 | L2₹34.4 L+₹54,048 (1.59%)Rejected-Finance 110059 NEW DELHI NATIONAL CAPITAL TERRITORY OF DELHI 110059 | WEST DELHI | DELHI | 110059 | L2 | Rejected-Finance Being not lowest tenderer | |
| 3 | L3₹40.0 L+₹6.1 L (17.9%)Rejected-Finance G 58 KIRAN GARDEN UTTAM NAGAR NEW DELHI 110059 | NEW DELHI | WEST DELHI | DELHI | 110059 | L3 | Rejected-Finance Being not lowest tenderer | |
| 4 | L4₹40 L+₹6.1 L (18.0%)Rejected-Finance | L4 | Rejected-Finance Being not lowest tenderer | |
| 5 | L5₹40.0 L+₹6.1 L (18.1%)Rejected-Finance | L5 | Rejected-Finance Being not lowest tenderer |
| Sl No | Description | Qty | Unit | M/S S.K.Electricals L4 | Neeraj Enterprises L6 | V r traders L2 | M/S Rohit Enterprises L7 | Sumit Enterprises L3 | Shiv Enterprises L1 | Deepak Electricals L8 | RUHI ASSOCIATES L5 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | S&F in replacement of Earthing complete with galvanised steel earth plate electrode, 600x600x6mm thick, buried directly in ground vertically to depth not less than 1.5 meters below normal ground level, connected to galvanised iron earthing strip 25x4mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel, CGI watering pipe 20mm bore light grade with funnel and wire mesh, PCC chamber in cement concrete 1:3:6 type c1, 80mm thick pre-cast RCC 1:2:4, type B-1 cover reinforced earth plate surrounded by alternate layers of packed charcoal, salt locked which shall not be less than 15cm in all side of earth plate complete all as shown in electrical plate No 3 of MES schedule Part-I Specified and directed by Engr-in-charge . | 8 | Each Job | 2,500 ₹20,000 Lowest | 3,500 ₹28,000 | 4,999 ₹39,992 | 7,000 ₹56,000 | 2,500 ₹20,000 Lowest | 3,500 ₹28,000 | 5,000 ₹40,000 | 11,000 ₹88,000 |
| 2.00 | Servicing of standby DG Set of capacity upto 50 KVA complete including draining out of diesel from tank , cleaning the fuel tank thoroughly and refilling the drained out diesel, draining out engine oil from the sump, cleaning the sump thoroughly and refilling the sump with new engine oil to it’s required level, replacing the fuel filter, lubricating oil filter, Check & clean air cleaner, change air cleaner elements, Check coolant level & make up the same ,Drain the Fuel filter & water separator, filling the starting batteries with electrolyte/Distilled water to maintain the required specific gravity, replace the u/s brass Connectors for batteries , Cleaning of Battery terminals & applying petroleum jelly to battery terminal posts & brass connectors, changing of V-belts, changing hoses and clips of air cleaner, checking of exhaust leakage, governor, breathers etc, adjust/set the same for proper functioning of DG Set, Checking of fuel, oil and water/ coolant level etc, adjusting and keeping the fan belts to the desired tension, tightening all the bolts and nuts to the required torque etc, cleaning the DG Set with accessories as prescribed by the manufacturer and test for Satisfactory running of DG set for two hour at connected load & record shall be made in respect of RPM, oil pressure, oil temp, Coolant temp, Voltage, frequency load current, Battery charging , fuel consumption etc. as directed by the Engr in charge. | 5 | Each Job | 5,000 ₹25,000 Lowest | 10,000 ₹50,000 | 7,599 ₹37,995 | 7,000 ₹35,000 | 8,100 ₹40,500 | 10,000 ₹50,000 | 10,000 ₹50,000 | 10,000 ₹50,000 |
| 2.10Make – Kirloskar/ Cotton Greaves/ Cummins. Note :- 1. Fuel filter, lubricating filter, air filter, distil water, Engine oil, brass connector, hose pipe set will be measured and paid Separately. 2. Coolant for makeup will be measured & paid separately. 3. DHPP will be issued by dept for testing only. | |||||||||||
| 3.00 | S&F in repair of diesel fuel filter suitable for DG set of capacity upto 50KVA complete all as specified and directed by Engr-in-charge. | 2 | Each | 1,500 ₹3,000 | 1,200 ₹2,400 | 1,619 ₹3,238 | 1,200 ₹2,400 | 2,100 ₹4,200 | 1,000 ₹2,000 Lowest | 1,200 ₹2,400 | 1,300 ₹2,600 |
| 4.00 | S&F in repair of lubricating filter suitable for DG set of capacity upto 50 KVA complete all as specified and directed by Engr-in-charge. | 2 | Each | 1,500 ₹3,000 | 1,200 ₹2,400 | 1,119 ₹2,238 | 1,300 ₹2,600 | 1,100 ₹2,200 | 1,000 ₹2,000 Lowest | 1,200 ₹2,400 | 1,100 ₹2,200 |
| 5.00 | S&F in repair of air cleaner/ filter suitable for DG set of capacity upto 50 KVA complete all as specified and directed by Engr-in-charge. | 2 | Each | 1,500 ₹3,000 | 5,000 ₹10,000 | 1,599 ₹3,198 | 1,200 ₹2,400 | 2,100 ₹4,200 | 1,000 ₹2,000 Lowest | 5,000 ₹10,000 | 2,000 ₹4,000 |
| 6.00 | S&F in repair of brass terminal for batteries all as specified and directed by Engr-in-charge. | 4 | Each | 100 ₹400 Lowest | 500 ₹2,000 | 219 ₹876 | 400 ₹1,600 | 300 ₹1,200 | 410 ₹1,640 | 500 ₹2,000 | 400 ₹1,600 |
| 7.00 | S&F in repair of Hose pipe set suitable for DG set of capacity upto 50KVA complete all as specified and directed by Engr-in-charge. | 2 | Each | 200 ₹400 Lowest | 1,200 ₹2,400 | 2,429 ₹4,858 | 2,500 ₹5,000 | 3,100 ₹6,200 | 500 ₹1,000 | 1,200 ₹2,400 | 2,700 ₹5,400 |
| 8.00 | S&F in replacement of DG set acoustic enclosure door lock/ door hinges suitable for capacity 45 KVA complete all as specified and directed by Engr-in-charge. | 2 | Each | 300 ₹600 Lowest | 1,000 ₹2,000 | 599 ₹1,198 | 1,000 ₹2,000 | 700 ₹1,400 | 300 ₹600 Lowest | 1,000 ₹2,000 | 800 ₹1,600 |
| 9.00 | Supply and filling lubricating oil 20W40 for DG Sets as per manufacturer's recommendation. | 150 | Ltr | 400 ₹60,000 | 500 ₹75,000 | 449 ₹67,350 | 150 ₹22,500 Lowest | 300 ₹45,000 | 300 ₹45,000 | 500 ₹75,000 | 400 ₹60,000 |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
18 Aug 2025, 6:00 pmClosed
GE AF Tughlakabad
GE AF TUGHLAKABAD SANGAM VIHAR PO NEW DELHI 110080
REPAIR/MAINT OF DG SET INCL CABLE, AIR CURTAINS, WATER COOLER, DESERT COOLER AND OTHER CONNECTED ITEMSAND REPAIR/MAINT OF SUMMER COOLING APPLIANCES, REFRIGERATOR, DEEP FREEZER, RO ALONG WITH ACCESSORIES AND MISC WORK AT BRD UNDER GE (AF) TUGHLAKABAD
2025_MES_722955_1
GE/TKD-51/2025-26
Open Tender
Civil Works - Others
Item Rate
270 days
GE AF Tughlakabad
MES contractor enlisted having deposited Standing Security with dept. Contractors not enlisted in MES should meet the MES enlistment criteria corresponding to appropriate class and category
8 documents required · 8 mandatory
₹0
₹80,000
Yes
11 Feb 2026
28 Jul 2025
20 Aug 2025
28 Jul 2025
18 Aug 2025
11 Aug 2025
Amount
S&F in replacement of Earthing complete with galvanised steel earth plate electrode, 600x600x6mm thick, buried directly in ground vertically to depth not less than 1.5 meters below normal ground level, connected to galvanised iron earthing strip 25x4mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel, CGI watering pipe 20mm bore light grade with funnel and wire mesh, PCC chamber in cement concrete 1:3:6 type c1, 80mm thick pre-cast RCC 1:2:4, type B-1 cover reinforced earth plate surrounded by alternate layers of packed charcoal, salt locked which shall not be less than 15cm in all side of earth plate complete all as shown in electrical plate No 3 of MES schedule Part-I Specified and directed by Engr-in-charge .
Servicing of standby DG Set of capacity upto 50 KVA complete including draining out of diesel from tank , cleaning the fuel tank thoroughly and refilling the drained out diesel, draining out engine oil from the sump, cleaning the sump thoroughly and refilling the sump with new engine oil to it’s required level, replacing the fuel filter, lubricating oil filter, Check & clean air cleaner, change air cleaner elements, Check coolant level & make up the same ,Drain the Fuel filter & water separator, filling the starting batteries with electrolyte/Distilled water to maintain the required specific gravity, replace the u/s brass Connectors for batteries , Cleaning of Battery terminals & applying petroleum jelly to battery terminal posts & brass connectors, changing of V-belts, changing hoses and clips of air cleaner, checking of exhaust leakage, governor, breathers etc, adjust/set the same for proper functioning of DG Set, Checking of fuel, oil and water/ coolant level etc, adjusting and keeping the fan belts to the desired tension, tightening all the bolts and nuts to the required torque etc, cleaning the DG Set with accessories as prescribed by the manufacturer and test for Satisfactory running of DG set for two hour at connected load & record shall be made in respect of RPM, oil pressure, oil temp, Coolant temp, Voltage, frequency load current, Battery charging , fuel consumption etc. as directed by the Engr in charge.
Make – Kirloskar/ Cotton Greaves/ Cummins. Note :- 1. Fuel filter, lubricating filter, air filter, distil water, Engine oil, brass connector, hose pipe set will be measured and paid Separately. 2. Coolant for makeup will be measured & paid separately. 3. DHPP will be issued by dept for testing only.
S&F in repair of diesel fuel filter suitable for DG set of capacity upto 50KVA complete all as specified and directed by Engr-in-charge.
S&F in repair of lubricating filter suitable for DG set of capacity upto 50 KVA complete all as specified and directed by Engr-in-charge.
S&F in repair of air cleaner/ filter suitable for DG set of capacity upto 50 KVA complete all as specified and directed by Engr-in-charge.
S&F in repair of brass terminal for batteries all as specified and directed by Engr-in-charge.
S&F in repair of Hose pipe set suitable for DG set of capacity upto 50KVA complete all as specified and directed by Engr-in-charge.
S&F in replacement of DG set acoustic enclosure door lock/ door hinges suitable for capacity 45 KVA complete all as specified and directed by Engr-in-charge.
Supply and filling lubricating oil 20W40 for DG Sets as per manufacturer's recommendation.
Supply and filling coolant for Radiator as per manufacturer's recommendations.
S&F in replacement of unserviceable water pump assembly rating upto 50KVA DG set all as specified and directed by Engr-in-charge.
Servicing/ Reconditioning of 90AH battery with change electrolyte, cell and l all connecting element and battery terminal complete all as specified and directed by Engr-in-charge.
Supply and fix in replacement of Engine safety unit (ESU) for DG set of capacity upto 45 KVA complete all as specified and directed by Engr-in-charge.
Supply and fix in replacement of unserviceable VAF meter including taking down unsv complete all as specified and directed by Engr-in-charge. Make:- Nippon or equivalent approved by GE.
Supply and fix in replacement of oil sensor including taking down unsv complete all as specified and directed by Engr-in-charge.
Supply and fix in replacement of unserviceable water line socket for capacity upto 45 KVA including taking down unsv complete all as specified and directed by Engr-in-charge.
Supply and fixing in replacement of unserviceable Turbo charger kit upto 45 KVA DG set complete all as specified and directed by Engr-in-charge.
Servicing of radiator assembly by removing from engine transporting to the workshop and removing the sediments and scales, corrosion etc by means of acid cleaning and high pressure water washing and air cleaning, gas welding / soldering with good quality material for stopping the leakage etc, re-assembling the same with new gaskets and transporting to the site, fixing to the engine with new clips complete as required for upto 45 KVA DG Set complete all as specified and directed by Engr-in-charge.
Supply & fix in repair of new digital RPM Meter of DG Set up to 45 KVA complete all as specified and directed by Engr-in-charge. Make:- Nippon or equivalent as approved by GE.
Supply & Fix in replacement of PVC insulated with standard copper conductor cable 2 mtrs length each soldered with 2 Nos gun metal battery terminals suitable for 180 AH 240 volts DC battery complete all as specified
Supply only distilled water in one litre container complete all as specified
Supply only sulphuric acid for lead acid battary in one litre container complete all as specified
M&L for servicing of self-starter assembly of DG Set 24 volts by disconnecting the self-starter from the engine and transport to workshop for carryout servicing by replacing all unserviceable spare parts including pinion, armature, carbon brushes, commutator, field coil, bushes, contacts, copper plates, jumping leads ets and replacing the filled coil and varnishing all as directed and specified by Engr-in-charge.
Dismantling existing fuel injection pump of DG set of capacity from 45 KVA, transporting to work shop and servicing complete including replacement of plunger, spring, nozzle assembly , calibrating and re-fixing the same and testing the DG Set to the entire satisfaction of Engineer-in-charge.
M&L for maintenance of Engine compatible with 45 KVA DG set after opening/ dismantling engine from DG set, transporting to workshop, including replacement of all necessary burnt spare parts like cylinder head, cylinder head valve, cylinder head seat, cylinder head guide, wall seal, push guide box, front and rear oil seal, cylinder head bolt, washer, valves, valve spring, inlet valve seat insert, exhaust valve seat insert, valve guide, cylinder head reconditioning kit, sealing ring bottom, sealing ring cap, rocker arm adjustment screw, oil metering screw, bush for support, rocker cover, gasket for rocker cover high temperature application, ball bearings, rubber sleeve, fuel pipe, header bottom and top etc, required to keep the engine in satisfactorily functional condition with all adjusting timing of fuel supply, cam shaft, crank shaft complete all as specified and directed by Engr-in-charge.
S&F in repair sub main wiring with Two single core PVC insulated FRLS cable with copper conductor multistranded 1100 volts grade 2.5 sqmm in and including non-metallic rigid PVC casing and capping and accessories and fixing arrangements fixed to surface on wall, floor or ceiling etc including 1.5 sqmm PVC insulated FRLS multistranded copper earth continuity conductor and connecting to main earth dolly complete all as specified and directed. Note : One run of earth continuity conductor, one run of PVC conduit and two run of 2.5 Sqmm copper conductor and 1.5Sqmm copper conductor together taken as one length for measuring unit length.
Supply & Fixing in replacement lead acid battery of 12 volts capacity 90 AH complete all as specified and directed by EIC.
S&F in replacement of onload changeover 4 pole, 200 Amps, 415 volts including taking down old unsv changeover complete all as specified and directed.
S&F in replacement of Power contactor 4 pole, 150 Amps, 415 volts including taking down old unsv contactor complete all as specified and directed.
S&F in replacement of Power contactor 3 pole, 180 Amps, 415 volts including taking down old unsv contactor complete all as specified and directed.
S&F in replacement of Power contactor 3 pole, 9 Amps, type MNX, 415 volts including taking down old unsv contactor complete all as specified and directed.
S&F in replacement of HBC fuse link DIN type of rating 250 Amp 415volt, size 01, breaking capacity 80/100 KA complete all as specified and directed by Engr-in-charge.
S&F in replacement of HBC fuse link DIN type of rating 200 Amp 415volt, size 01, breaking capacity 80/100 KA complete all as specified and directed by Engr-in-charge.
S&F in replacement of battery charger in dg set control panel of capacity 12 VDC 10 AMP including taking down old unsv charger complete all as specified and directed by Engr-in-charger. Make:- NHP or equivalent as approved by GE.
S&F in replacement of Earth leakage relay in DG set of capacity upto 45 KVA control panel including taking down old unsv charger complete all as specified and directed by Engr-in-charger. Make:- Technika or equivalent as approved by GE.
S&F in replacement of under voltage relay in DG set of capacity upto 45 KVA control panel including taking down old unsv charger complete all as specified and directed by Engr-in-charger. Make:- Technika or equivalent as approved by GE.
S&F in replacement of on delay timer in dg set of capacity upto 45 KVA control panel including taking down old unsv charger complete all as specified and directed by Engr-in-charger. Make:- Technika or equivalent as approved by GE.
S&F in replacement of reverse power relay in dg set of capacity upto 45 KVA control panel including taking down old unsv charger complete all as specified and directed by Engr-in-charger. Make:- Technika or equivalent as approved by GE.
S&F in replacement of water pump suitable for upto 45 KVA DG set all as directed by Engr-in-charge.
S&F in replacement of injector suitable for upto 45 KVA DG set all as directed by Engr-in-charge.
S&F in replacement of radiator suitable for upto 45 KVA DG set all as directed by Engr in charge.
S&F in replacement of fan suitable for upto 45 KVA DG set all as directed by Engr in charge.
Supply, installation, testing and commissioning of LT Panel suitable for 3 phase 415 V of suitable size Outdoor type made out of 3.15 mm thick CRCA sheet with angle iron frame of size 50x50x6 mm and base channel of suitable, cubicle type complete with Air Circuit Breaker, copper bus bar 600 Amp -04 Nos with IP-54 as per measuring voltage, current, PF, and phase indicating lamp, ammeter with suitable size of CTs, voltmeter, frequency meter including interlocking arrangements for SCBs etc comprising of the following: (i) MCCB 400 Amp, 4 Pole, 50 KA - 01No (Incoming) (ii) MCCB 63 Amp 50 Hz,415 V with rupturing capacity 25 KA-02 (iii) MCCB 100 Amp 50 Hz, 415 V with capacity 25 KA - 02 (iv) MCCB 100 Amp 50 Hz,415 V with capacity 35 KA - 02
Notes (i) Vertical height of legs shall not be less than 45 cm from top of nearest road level /PCC Floor Finish. Legs shall be grouted in ground minimum 30 cm PCC(1:3:6) type C1 (using 20 mm graded crushed stone aggregate) (ii) MS Frame work shall be painted with two coats of synthetic enamel paint of approved tint over a coat of red oxide primer. (iii) Cost of internal wiring, MS Frame work, painting, platform, MCCB Spreaders, cable glands, locking arrangement with Aluminium bolt and any minor addition /alteration required at site (the decision of GE shall be final and binding regarding extent to which the change can be considered as minor addition/ alteration) shall be deemed to be included in the quoted rates.
M&L in replacement of Rotational moulded polyethylene water storage capacity 2000L tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified and as directed by Engr-in-Charge.
Supply and fix in replacement electric water heater storage type metal body with copper inner tank and heating element upto 2 KW capacity 25 litre, complete with all accessories such as safety valve, thermostat, NRV, connection piece etc.
S&F in replacement 2'x2' size LED panel lighting luminaire glare free illumination suitable fr false ceiling (armstrong/Grid) 36 watts capacity recess mounting with high brightness SMD LEDs complete all as directed by EIC.
S&F in replacement 1'x1' size LED panel lighting luminaire glare free illumination suitable fr false ceiling (armstrong/Grid) fitting size 284x284x23 mm (LXWXH) of 12 watts capacity recess mounting with high brightness SMD LEDs
Supply and Fixing in replacement Motorized Aluminium Rolling Shutter, Size:- 4090 x 4673 mm With Chain Drive System & Key Operator with 1 Pair Infrared Beam Safety Sensor & Hazard Notification Led Siren Light, Specially Make 1.2 mm Thick Double Wall Aluminium Shutter Curtain, Jointless T-Shaped Specially Design Side Guide with EPDM Lip seal, Mild Steel Bottom Bar With Epdm Rubber Seal & Manual Lock Provision and Attached Angel, Galvalume 0.7mm Thick Top Cover & Motor Cover, Mild Steel 5mm Thick Top Support Plate & Round Shaft, MS Frame 3 mm Thick Rectangular Pipe for Shutter Installation, Complete Shutter Powder Coated Bottom to Top in Blue Colour
Supply and fixing in replacement of Automatic transfer switch of capacity 400 Amp 4 pole, AC-31 A,50 HZ,415 V automatic/ manual with inbuilt time delay complete all as specified and as directed by Engr-in-charge.
Supply and fixing in replacement of Automatic transfer switch of capacity 200 Amp 4 pole, AC-31 A,50 HZ,415 V automatic/ manual with inbuilt time delay complete all as specified and as directed by Engr-in-charge.
Disconnecting U/S burnt out rotary/reciprocating compressor from existing electric and pipe line connections of Refrigerator of 165 ltr to 270 ltr capacity of any make / location, transporting and replacing with new compressor including connecting suction and discharge lines by copper brazing, refixing capillary filter, pressure testing with the help of nitrogen gas and flushing out the oil in condenser cooling coil, establishing vacuumed for dehydration complete all as specified and as directed by Engr-in-charge. Make : Godrej , Shreeram , Tecumseh , Emersion
Ditto all as per item no. 51 above but refrigerator of capacity 205 ltr to 500 litres complete all as specified and directed by Engr-in-charge.
Ditto all as per item no. 51 above but Water cooler of capacity 40 / 60 / 80 /120 / 150 litres complete all as specified and directed by Engr-in-charge.
Ditto all as per item no. 51 above but Window / Split type AC of capacity 1.5/2.0 TR complete all as specified and directed by Engr-in-charge.
Ditto all as per item no. 51 above but Pillar / tower/ package type AC of capacity 3.5 TR complete all as specified and directed by Engr-in-charge.
Supply and fixing in replacement fan motor / condenser motor and replacing the same with new fan / condenser motor 230 Volts, 50 Hz, SP suitable RPM for water cooler of capacity 40 / 80, 60 / 120 and 60 / 150 litres including connecting / mounting brackets to base frame and testing complete all as specified and as directed by Engr-in-charge. Make : usha , modi , signature , bajaj
Ditto all as per item no. 56 above but of 230 Volts, 50 Hz, SP suitable for frost free refrigerator of capacity 165 to 500 litres complete all as specified and directed by Engr-in-charge
Ditto all as per item no. 56 above but suitable for split type AC out door unit & window type AC of capacity 1.5 / 2 TR complete all as specified and directed by Engr-in-charge.
Ditto all as per item no. 56 above but suitable for Pillar/ tower/ package type AC of capacity 3.5 TR complete all as specified and directed by Engr-in-charge.
Ditto all as per item no. 56 above but of 230 Volts, 50 Hz, SP suitable for deep freezer of capacity 205 to 310 ltrs cap complete all as specified and directed by Engr-in-charge.
M&L for Vacuum the system and after maintaining vacuum for 24 hours supply and charge refrigerant gas HCFC 22/R 134/R 410A R/32 complete all as specified and directed by the Engineer-in-Charge. Make:-Mafron/Refron
Supply and fixing in replacement Condenser unit for refrigerator of capacity 165 to 500 litres of any model, type, size and capacity including testing including making all connections complete all as specified and as directed by Engr-in-charge. NOTE: Gas charging shall be measured and paid separately
Ditto all as per item no. 62 above but for Water coolers 40/80/ 60/ 120/ 150 ltr capacity complete all as specified and directed by Engr-in-charge.
Ditto all as per item no. 62 above but for Window AC of capacity 1.5/2 TR capacity complete all as specified and directed by Engr-in-charge.
Ditto all as per item no. 62 above but for Split type AC of capacity 1.5/2 TR capacity complete all as specified and directed by Engr-in-charge.
Ditto all as per item no. 62 above but for Deep freezer of capacity 205 to 310 litres complete all as specified and directed by Engr-in-charge.
Supply and fixing in replacement Cooling unit for refrigerator of capacity 165 to 500 litres of any model, type, size and capacity including making all connections complete all as specified and as directed by Engr-in-charge. NOTE: Gas charging shall be measured and paid separately
Ditto all as per item no. 67 above but for Water coolers 40/80/ 60/120/150 ltr capacity complete all as specified and directed by Engr-in-charge.
Ditto all as per item no. 67 above but for Window AC of capacity 1.5/2 TR capacity complete all as specified and directed by Engr-in-charge.
Ditto all as per item no. 67 above but for Split type AC of capacity 1.5/2 TR capacity complete all as specified and directed by Engr-in-charge.
Ditto all as per item no. 67 above but for Deep freezer of capacity 205 to 310 litres complete all as specified and directed by Engr-in-charge.
Supply and fixing in replacement of internal wiring bit & necessary wire suitable for window / Split type AC's, Water coolers, Refrigerators and Deep freezers of any make, model, type, size and capacity including making all connections complete all as specified and as directed. NOTE: Gas charging shall be measured and paid separately
M&L for Detecting gas leakage of refrigerators, water coolers, deep freezers, window/split/pillar type AC's and creating vacuum, rectifying/arresting the leakages, testing for pressure drop, charging refrigerant gas in the unit to the required pressure complete all as specified and as directed by Engr-in-charge.
Supply & fixing in replacement running/ starter capacitor 2.5/ 3.15 / 4.0/ 6.0 mfd, 250 volts, AC, from cooling appliances complete all as specified and as directed by Engr-in-charge. Make : EPCOS , Asian , Bajaj
Ditto all as per item no. 75 above but of 36.00 mfd 6 pin, 45mfd 6, 50.0/6 mfd & 80.0/100.00 mfd complete all as specified and directed by Engr-in-charge.
Supply and fixing in replacement thermostat, over load protector, Capillary & filters suitable for window / Split type AC's, Water coolers, Refrigerators and Deep freezers of any make, capacity and model and testing complete all as specified and as directed by Engr-in-charge. Make : Indofos, Johnson, honeywell
Supply and fixing in replacement starting box type relay of package assembly suitable for window / Split type AC's, Water coolers, Refrigerators and Deep freezers of any make, capacity and model and testing complete all as specified and as directed by Engr-in-charge. Make : Renutral , Indofos , Godrej
Supply and fixing in replacement 15 mm dia ball/float valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms /20 mm - 210 gms / 25 mm-455 gms/ 40 mm- 690 gms) from water cooler of any capacity, make, location etc including connecting and testing complete all as specified and as directed by Engr-in-charge.
Supply and fixing in replacement Push cock,15 mm dia, brass chromium plated (SS 304) self closing type complete all as specified and directed by Engr-in-charge.
Supply and fixing in replacement 15 mm dia Stop valves, brass, chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed by Engr-in-charge.
Supply and fixing in replacement stainless steel SS 304 water drain out tray for water cooler complete all as specified and directed by Engr-in-charge.
Supply and fixing in replacement PVC pipe 32 mm dia for draining out waste water complete all as specified and as directed by Engr-in-charge
Supply and fixing in replacement Fan blade set for water cooler fan motor complete all as specified and directed by Engr-in-charge.
M&L for repairing of foundation/bottom base of water coolers any make & type with suitable size angle iron by welding/ screwed/ nut bolts after giving proper shape and making good complete all as specified and directed by Engr-in-charge.
S&F in repair GI tubbing medium grade 15 mm with all fittings in any position at any location as specified & directed by Engr-in-charge.
Supply and fixing in replacement Bimetal for frost free for refrigerator of any model, type, size and capacity complete all as specified and as directed by Engr-in-charge.
Supply and fixing in replacement Copper tube 1/4" size, thickness greater than 0.7 mm complete for cooling appliances, of any model, type, size and capacity to suit the existing including connecting complete all as specified and as directed by Engr-in-charge.
All as per item no. 87 above but of size 1/2"
All as per item no. 87 bove but of size 3/8"
All as per item no. 87 above but of size 5/8"
Supply and fixing in replacement Evaporative cooling coil for refrigerator of capacity 165 to 500 litres of any model, type, size and capacity as per existing including testing complete all as specified and as directed by Engr-in-charge.
Supply and fixing in replacement Plug top 3 pin, 230 Volts, 16 Amps including testing complete all as specified and as directed by Engr-in-charge. Make : Anchor , Havells , Legrands
Supply and fixing in replacement Refrigerator door to refrigerator of any capacity from 165 to 500 litres of any model, type, size including testing complete all as specified and as directed.
Supply and fixing in replacement Heater of any size to refrigerator of any capacity from 165 to 500 litres of any model, type, size complete all as specified and as directed by Engr-in-charge. Make : Indofos , Denfos
Labour only for repairing and attending the complaint of Split/ Window AC/ Water cooler/Refrigerator/desert cooler by highly skilled tradesman and carryout minor repair and making functional complete all as specified and directed by Engr-in-charge at site. Note :- (replacement of major spare part will be measured and paid separately under appropriate items )
Taking out & removing old existing plywood (if present) of any description and in any position and supplying and fixing new plywood 4mm thick, grade BWR, type BB, 3 ply, cut to size made to shape and fixed in position with nails as to make the window of desert cooler/window AC etc air tight complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in replacement Air filter PVC type of existing window air conditioners/ split AC of capacity 1.5 / 2 TR, from any position, of any make complete all as specified and directed by Engr-in-charge.
Supply and fixing in replacement Fan blade of existing window / split type air conditioners of capacity 1.5 / 2 TR, from any position, of any make complete all as specified and as directed by Engr-in-charge.
Supply and fixing in replacement MCB, SP/DP, 32 Amps 230/240 Volts,50 Hz for existing window / split type air conditioners complete all as specified and directed by Engr-in-charge.
Supply and fixing in replacement Sheet metal enclosure with 3 pin metal clad socket 32 Amps with metal clad plug top including 1 No MCB, SP of capacity 32 Amps for existing window / split type air conditioners, from any position, of any make including testing complete all as specified and as directed.
Supply and fixing in replacement PVC insulated cable 3 core 2.5 Sq mm, FRLS 1100 Volts grade copper conductor, multistranded including testing complete all as specified and directed.
M&L for Sub main wiring complete with non-metallic rigid PVC insulated fire retardant grade unsheathed 1100V grade multistranded copper conductor cable 2 run of 6 Sqmm single core confirming to IS-694 with copper conductor drawn through PVC casing capping/conduit heavy duty and accessories in walls, roof and floors along with 1 run of 6 Sqmm PVC insulated unsheathed cable with multistranded copper conductor as earth continuity conductor complete including chase cutting by cutter concealed in PVC conduit all as specified and as directed by Engineer-in-Charge.
Supply and fixing in replacement with new display assembly of existing window / split type air conditioners of capacity 1.5 / 2 TR, from any position, of any make including testing complete all as specified and as directed.
Supply and fixing in replacement of front grill with air filter of window AC 1.5 / 2 TR of any make Complete all as specified and as directed.
Supply and fixing in replacement of wireless remote control (micro-processor) unit suitable to window/split AC 1.5/2 TR Complete all as specified and as directed.
Supply and fixing in replacement with new Electronic card/ PCB of existing window / split type air conditioners of capacity 1.5 / 2 TR, from any position, of any make including testing complete all as specified and as directed.
Material & labour for repairing electronic card / PCB of window / split AC including taking down/out electronic card /PCB including refixing back at site after repair & testing complete all as specified and as directed.
S&F complete indoor unit of split type AC 1.5/2.0 TR in replacement of worn out unit Comprises of cooling coil, blower, blower motor, swing motor, swing blade filter, PCB, Thermostat etc complete all as specified and as directed by Engineer-in-charge. Make- Voltas/ LG / Blue Star
S&F complete outdoor unit of split type ac 1.5/2.0 TR in replacement of existing worn out indoor unit complete with outdoor fan motor, outdoor fan, condenser unit with cooling coil, copper/aluminium fins, wiring etc as per existing with connection for indoor and outdoor with copper tubing complete. Make- Voltas/ LG / Blue Star
S&F MS stand factory made suitable for condensing unit of split type AC/Window AC duly powder coated all as specified and as directed by Engineer-in-Charge.
S&F in replacement of blower assembly suitable to Split AC cap 1.5/2 TR all as specified and as directed by Engineer-in-Charge. Make- Hitachi , LG , Blue star.
Taking down defective /unserviceable of commercial air curtains unit of 5 & 6 feet long and mounted at 7.25 feet, repaired/rewinding of high speed motor with super enamelled copper wire of unserviceable Air curtain height from ground level for presentation of dust and conditioned air losses, single phase 220 V and 50 Hz made out of MS CRCA sheet of aluminium thickness 1 gauge finished with two coat of red oxide primer and final coat of synthetic enamel paint (over baked) with MS -CRC 18 gauge square perforated suction grills, aluminium alloy fans and single phase electric motor, nozzle etc complete with fitted and accessories so as to produce 1-1.5 m/sec air velocity at floor level complete all as specified and directed by Eng-In-Charge. Note:- During the time of fixing of Air curtain if any item required at site i.e angle iron etc. cost of the same deemed to be quoted rate.
S&F compressor for bottled water dispenser including brazing work creating vacuum for 24 hrs for pressure testing and charging of refrigerant R134a, having option of dispensing hot and cold water with cooling capacity 3 ltrs/hr and tank capacity of 3.4 ltrs, heating capacity 6 ltrs/hr and tank capacity1.6 ltrs, working in R-134a refrigerant complete. Make-Voltas/LG/Emerson Copeland
Supply & fixing in replacement of old rusted desert cooler capacity 4000/5000 cum/hr made out of GI sheet 22 SWG complete with front panel and replacement of complete cooler body, U/S fan motor and U/S water Pump of approved make all as specified and as directed by Engr-in-Charge.
Supply and fixing in replacement of fan blade made of GI sheet of heavy duty for desert cooler for any capacity complete all as specified and as directed. Make : Anchor , Havells , Legrand
Supply and fixing in replacement PVC flexible rubber pipe 15 mm dia for desert coolers complete all as specified and directed
Supply and fixing in replacement Plug top 3 pin, 230 Volts, 6 Amps including testing complete all as specified and as directed. Make : Anchor , Havells , Legrand
Supply and fixing in replacement wood wool pad (set of 3 ) of suitable size to dessert cooler of capacity 3000 to 6000 CFM complete all as specified and as directed.
Supply and fixing in replacement Drum/fan motor copper wound 230 Volts, 50 Hz, 1440 RPM, SP for desert cooler of any capacity, from any position, of any make including testing & mounting arrangement complete all as specified and directed Make : Signature , Modi , USHA
Supply and fixing in replacement Water pump, 18/20 watt , 230 Volts, 50 Hz, SP with discharge head of 1.87 m for desert cooler of any capacity complete all as specified and as directed. Make : Signature, Modi, USHA
Supply and fixing in replacement PVC insulated cable 3 core multistand copper conductor FRLS 1100 Volts grade 1.5 Sq mm for desert coolers including testing complete all as specified and as directed.
Taking down/out split/window type AC 1.5/2 TR capacity of any make, from existing position, transporting and refixing at the new location including fixing complete unit with gitties / fastener, cutting wall / concrete including arrangement of T&P for laying copper tubing, brazing work, making necessary connections to make it functional complete all as specified and directed by Engr-in-charge. Note : (a) Gas charging if regd shall be measured and paid separately. (b) Any additional copper tubing & parts required for shifting the unit is deemed to be included in quoted rates.
Material & labour for preparing the surfaces by scrapping out the old paint and painting with two coat of painting of synthetic enamel paint inside & outside surface and applying two coats of rubber seal paint inside water tank to desert cooler capacity upto 5000 cum/hr by spray painting including rewriting MES/SM NO. complete all as specified and directed by Engr-in-charge.
S&F water dispenser in replacement of worn out, U/S rusted body and floor mounted, cooling cabinet 5 ltrs hot and cold both with 10 Ltrs capacity of storage, having refrigerant 134a complete.
M&L for Replacement of complete rusted body of voltage stabilizer including U/S transformer, U/S buck & boost relay, U/S electronic control PCB, U/S timer circuit and trigger transformer for automatic operation single phase naturally air cooled indoor type and designed for input variation b/t 170 V to 280 V with output voltage stabilized at 230 V with accuracy of + 2.5 % and of capacity 4 / 5 KVA complete all as specified.
Taking down/out from existing position RO water filter/Purifier filter unit of any capacity 40/60/80 120 LPH , servicing the same by washing all filters Like sediments filter, carbon filter UV filter, mineral cartridge, Flow restrictor, pressure switch with jet followed by clean water, cleaning, drying complete assembly , checking wiring, replacement of Adapter 24V-DC ,Worn out Sensor Module, Booster pump electric connections, tightening all loose parts for proper functioning and refixing to its original position and testing for smooth functioning complete full service complete all as specified and directed by Engr-in-charge. NOTE: Entire work is to be carried out to be OEM only. (b) Cost of all T&P i.e. All filter, pressure pump , Solenoide Valve, hose pipe etc is deemed to be included in the coated rates.
Supply and fixing in replacement Pre carbon filter, post carbon filter, RO Membrane/Mineral filter, Sediments filter suitable for RO water filter of 40/60/80 LPH any make, capacity and model and testing complete all as specified and as directed by Engr-in-charge. Make : Aquaguard, Bluestar, Honeywell.
Ditto all as per item no. 127 above but Solenoid valve complete all as specified and directed by Engr-in-charge.
Ditto all as per item no. 127 above but SMPS 24V complete all as specified and directed by Engr-in-charge.
Ditto all as per item no. 127 above but Booster pump 24V DC complete all as specified and directed by Engr-in-charge.
Ditto all as per item no. 127 above but Flow restrictor (FR300/ FR450/ FR550), Floating Switch & Pressure switch suitable for RO water filter of 40/ 60/ 80 LPH complete all as specified and directed by Engr-in-charge. Make:- KR plus Flow or equivalent.
Ditto all as per item no.127 above but elbow, T- Connector any make complete all as specified and directed by Engr-in-charge.
Supply and fixing in replacement PVC pipe size 3/8" suitable for RO water filter of any make, capacity and model and testing complete all as specified and as directed by Engr-in-charge. Make : Aquaguard, Bluestar or equivalent.
Ditto all as per item no. 133 above but PVC pipe size 1/4" complete all as specified and directed by Engr-in-charge.
V r traders (BID ID -3394425)
Sumit Enterprises (BID ID -3397512)
M/S S.K.Electricals (BID ID -3393195)
RUHI ASSOCIATES (BID ID -3395828)
Neeraj Enterprises (BID ID -3394024)
M/S Rohit Enterprises (BID ID -3396616)
Deepak Electricals (BID ID -3390575)
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .