Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹47.5 LAccepted-AOC | L1 | Accepted-AOC AOC AWARDED DUE TO L1 BIDDER | |
| 2 | L2₹48.1 L+₹48,780 (1.02%)Rejected-Finance BOMDILA WEST KAMENG ARUNACHAL PRADESH PIN 790 001 | BOMDILA | WEST KAMENG | ARUNACHAL PRADESH | 790001 | L2 | Rejected-Finance BIDDER REJECTED DUE TO HIGHER BID VALUE | |
| 3 | L3₹48.1 L+₹50,080 (1.05%)Rejected-Finance | L3 | Rejected-Finance BIDDER REJECTED DUE TO HIGHER BID VALUE | |
| 4 | L4₹48.7 L+₹1.1 L (2.24%)Rejected-Finance PO BAZAR LINE BOMDILA DIST WEST KAMENG ARUNACHAL PRADESH PIN 790 001 | WEST KAMENG | ARUNACHAL PRADESH | 790001 | L4 | Rejected-Finance BIDDER REJECTED DUE TO HIGHER BID VALUE | |
| 5 | L5₹49.2 L+₹1.6 L (3.32%)Rejected-Finance | L5 | Rejected-Finance BIDDER REJECTED DUE TO HIGHER BID VALUE |
Tender Value
₹47.3 L
EMD Value
₹94,600
Closing Date
5 Dec 2022, 2:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
LT COL BIRENDRA SINGH
GE 859 EWS
PROVISION OF RETAINING WALL TO PROTECT BLDG OF OFFICERS MESS COMPLEX AND APPROACH ROAD TO RUPA WATER POINT AND SPL REPAIR TO BUILDING NO TOP/21/140 (A COY COOK HOUSE AND DINING HALL) OF 2 ARUNACHAL SCOUT BATTALION at RUPA AREA OF AGE B/R II AND AGE E
2022_MES_562900_1
8366/E8
Open Tender
Civil Works
Item Rate
180 days
RUPA
AS PER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
GE 859 EWS
₹94,600
Yes
26 Apr 2023
14 Nov 2022
6 Dec 2022
14 Nov 2022
5 Dec 2022
28 Nov 2022
Amount
Rough excavation not exceeding 1.5mtr deep and getting out hard dense soil with complete all as specified and directed.
Excavation over area not exceeding 1.5mtr deep and getting out hard dense soil all as specified and directed.
Excavation in trenches n.exc 1.5mtr wide and n exc 1.5m deep for foundation and getting out in hard dense soil.
Returning filling in including spreading ,levelling ,watering and well ramming in layers not exc 25 cm thick as in hard/dense soil with complete all as specified and directed.
Removing excavated material exc 250m but n.exc 500m depositing where with complete all as specified and directed.
M & L for Plain Cement concrete 1:3:6 type D-2 (using 40mm agg) as in foundations, filling and mass-concrete all as specified and directed.
M&L for walling of RR, uncoarsed, well bonded bedded & solidly hearted built in cement mortar 1:6 with complete all as specified and directed.
Extra over stone walling for hammer dressing to face stones & dressing to face beds and joints as specified at RR walling uncoarsed or brought upto coarse, max depression on face from straight edge held against the dressed surface n.exc 20 mm granite or trap stone with complete all as specified and directed.
M&L for raised pointing to RR, uncoarsed or brought upto course stone masonry in cement mortar 1:3 all as specified and directed.
M&L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) with complete all as specified and directed.
Providing pre cast PCC bonders (for stone walling), type B1 1:2:4 (20 mm graded aggregate) set in cement mortar 1:6 with complete all as specified and directed.
S&F 75 mm dia PVC (SWR) pipe in any length with rubber joints laid in trenches or floors with complete all as specified and directed.
M&L for Hand packing (any thickness )at back filling with broken stone or boulders all as specified and directed.
M&L for providing cement concrete in coping type B1 1:2:4 (20 mm graded stone aggregate) in coping all as specified and directed.
M&L for Plain cement concrete (1:3:6) type C-2, using 40mm graded stone aggregates in surface channel, bed of drains incl form work / moulds complete all as directed.
M&L rendering 15mm thick in CM 1:4 on concrete surfaces finished even and smooth with finish using extra cement .
Extra for fair finishing drain or channels 30 cm inner girth in cement concrete using extra cement including forms, moulds etc.
Add or deduct item no above for each 25mm inner girth or part there of over or under 30cm inner grith in cement concrete using extra cement including forms, moulds etc with complete all as specified and directed.
Formwork to sides of concrete foundations, footings, bases of columns, raft and faft beams, sides and soffits (if any ) of foundation and plinth beams, and similar work, vertical or to batter with complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) all as specified and directed.
M&L non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors including 15 mm thick screed bed in CM 1:6 for laying floor tiles. etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match Note :- Colour and pattern will be decided by GE/Engr-in-charge. Contractor will bought the tiles only after approval of colour and pattern of tile by GE/Engr-in-charge.
M & L for 350x250x7 mm/450 x 350 x7 mm thick glazed coloured ceramic tiles on vertical surface of wall including 10mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces finished rough to receive tiles etc. set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade. Note :- Colour and pattern will be decided by GE/Engr-in-charge. Contractor will bought the tiles only after approval of colour and pattern of tile by GE/Engr-in-charge.
Hacking out old broken glass (any thickness, size quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones all as specified and directed.all as specified and directed.
S&F 3mm thick sheet glass ordinary quality and glazing with oil putty or wooden beading in squares not exceeding 0.5 Sq. M in each pane all as specified and directed.
Taking down Chowkats or frames not exceeding 1.5 Sqm each (Without taking off shutters from the frames) all as specified and directed.
S&F Steel windows with side hung shutters without glazing bars, dovetailed or welded including projecting type hinges with steel handle, and steel peg stay complete all as specified.
Taking down Shutters of any description exc 1 sq. m but n.exc 2 Sqm each and removing to store all as specified and directed.
Supply and fix 30mm thick 2nd class hardwood plain framed paneled shutters (any numbers of panels) with panel of timber flat on both sides (feather edged) complete including fitted to chowkats
Supply and fix 100mm long MS butt hinge medium weight cold rolled all as specified and directed.
Supply and fix aluminium anodized barrel tower bolt 150mm long extruded section all as specified and directed.
Supply and fix 150mm size aluminium anodized handle fabricated type all as specified and directed.
Supply and fix 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy all as specified and directed.
M&L for PCC 1:3:6 type C2 block masonry with solid blocks, exc 10cm in width and setting in cement mortar 1:4 all as specified and directed.
Demoloition of cement concrete of any description and in any situation not otherwise specifically provided for all as specified and directed.
M&L for 75 mm thick plain cement concrete type C-1, 1:3:6, (40mm graded stone aggregate)as in plinth protection,hardstanding and subbase finishing the top surfaces even and smooth W/O using extra cement all as specified and directed.
M&L for Chequered cement concrete tiles 200x200x25mm including 20mm thick screed bed or bedding layer in CM (1:6) for laying floor finishes etc. set and jointed and pointed in neat cement slurry in floor with grey cement and pigment all as directed.
Taking down cement plaster on brick, concrete stone surfaces etc including raking out joints, hacking for key, scrubbing down with water etc all as specified and directed.
M & L for 15mm thick rendering in cement mortar 1:6 on brick or concrete surfaces finishing the surfaces even & fair all as specified and directed.
Preparing newly plastered surfaces of walls and applying three coats of white wash all as specified and directed.
Dismentling plain or corrugated steel sheeting of any thickness as in roof and wall covering all as specified and directed.
S&F pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specifie
Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
Dismantling of wall and ceiling boards of any thickness including cover fillets all as specified and directed.
M & L for 9 mm thick ply wood, grade BWR, type BB, fixed with screw to timber frame work on wall surfaces.
M & L for 6 mm thick ply wood, grade BWR, type BB, fixed with nails to timber frame work on ceiling surfaces.
Material and labour for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pinkprimer, complete all as specified and directed.
M & L for second class hard wood in scantling cleane sawn as in frame work with complete all as per specified and directed.
M & L for 2 nd class soft wood plain fillets, square, rectangular or triangular in section,wrought, secured with nails or brads, sectional area exc 3 but n.exc 6 sq.cm with complete all as per specified and directed.
Material and labour for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exc 200mm thick (Horizontal or sloping) for fair finished flat surfaces of concrete.
Supply and fix Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed.
Material and Labour for reinforced Cement Concrete 1:2:4 (using 20 mm graded crushed stone aggregate) type B1, as in slabs supported on walls, beams and columns, in floors, roofs, landing and in shelves, chajjas etc including removing rubbish off the premises complete all as specified and directed.
M & L for green Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms, floor and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble all as specified and as directed.
Supply and fix Chromium plated curtain rod of medium weight and fixing brackets and decorative end supports etc complete all as specified and directed
S&F 18/19 mm MDF DWR prelaminated particale board ,interior grade , prelaminated one side with decorative choice lamination & other side balancing white lamination ,fixed with screws to timber frame work complete all as specified and directed.
Supply and fixing continuous hinges (Piano) hinges,30mm brass,brighgt finish or electro galvanised complete all as specified and directed.
M & L for Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed all as specified and directed.
M & L for Extruded brass handles, fabricated type polished of size 100mm complete all as specified and directed.
Material and labour for preparation of old treatment on external surfaces of walls and washing down with water to receive the surface and applying one coat of cement base paint (colour and tint as approved) on walls etc with complete all as specified and directed.
Material and labour for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.
Taking down copper/aluminium point wiring (light, Bell, fan, socket or power) complete and removing material to store for keeping in safe custody or for taking credit and making good the disturbed surfaces of wall /ceiling so as to match with the existing finishes complete all as specified and as directed.
M&L for Point wiring with PVC insulated and unsheathed multistranded FRLS copper conductor single core 1.5 Sqmm (nominal area) cable using approved colour code as per IS drawing in and incl PVC casing and capping (ISI Mark) with all accessories including providing PVC board heavy duty incl providing plastic laminated bakelite sheet top coveralongwith copper earth wire PVC insulated & unsheathed multistranded(FRLS) copper conductor cable of size 1.5 Sqmm as continous earth wire connected to common earth and earth dolly complete all as specified. Make of Cable :- Havells/Polycab/Anchor/Finolex
One light /Fan point controlled by one switch 6/5 Amp.
One 3 pin socket outlet 6/5 Amps controlled by one switch on the same board with other switches.
One 3 pin 6/5 Amp socket outlet controlled by one switch indep board.
M&L Point wiring of Power point contolled by one 15 Amp switch independent with PVC insulated and unsheathed multistranded FRLS copper conductor single core 4.0 Sqmm (nominal area) cable using approved colour code as per IS drawing in and incl PVC casing and capping(ISI Mark) with all accessories including providing PVC board heavy duty incl providing plastic laminated bakelite sheet top cover alongwith copper earth wire PVC insulated & unsheathed multistranded(FRLS) copper conductor cable of size 4.0 Sqmm as continous earth wire connected to common earth and erth dolly complete all as specified and as directed. Make of Cable :- Havells/Polycab/Anchor/Finolex
S&F switch piano flush type (ISI marked), single pole, one way 5 Amp, 240 Volts including taking down unserviceable one complete all as specified & directed. Make : Anchor/Havells (Reo)/Kinjal/Kay
S&F switch socket combination 2 in 1, 3 pin, 6 Amp piano flush type (ISI marked), 240 Volts including taking down unserviceable one complete all as specified & directed. Make : Anchor/Havells (Reo)/Kinjal/Kay
S&F switch socket combination 2 in 1, 3 pin, 16/15 Amp piano flush type (ISI marked), 240 Volts including taking down unserviceable one complete all as specified & directed. Make : Anchor/Havells (Reo)/Kinjal/Kay
S&F ceiling rose, surface bakelite, 65mm x 50mm , two to three terminals including taking down unserviceable one complete all as specified & directed. Make : Anchor/Havells /Kinjal/Kay
S&F lamp holder insulated body with back plate suitable for batten fittings including taking down unserviceable one complete all as specified & directed. Make : Anchor/Havells /Kinjal/Kay
S&F Regal Batten for LED Tube, universal batten for G 13, T8 lamps complete with all accssories internally pre wired and incl connecting up to ceiling rose with 0.5 sqmm twin core copper flexible conductor cable including Photon Ultra Plus LED Tubelight 20 Watt (Single Side Connection) Ultra bright LED polycarbonate Tubelight with 10% THD with very high efficiency suitable for intalltion in T8 Tubelinght with G 13 lamp holders to give glare free light with integrated electronic driver and mounting casing box 2 Nos including taking down unserviceable one complete all as specified and directed. Make: Crompton Greaves Cat Part No IGP161LT-8-16 & LTT8-20 or equivalent in Phillips/Bajaj/Havells
S&F environmental friendly, ultra modern, energy saving, surface mounted decorative hexagon LED bulk head 10W including connecting up to ceiling rose with 0.5 sqmm two core copper flexible conductor cable including taking down unserviceable one complete all as specified and directed. Make : Crompton Greaves - Cat Part No LBHP-10-CDL or equivalent in Philips / Bajaj / Havells
S&F LED lamp 15 watt, CDL, B-22 cap, (Pin type), 230V, PF not less than 0.85 (min) including taking down unserviceable one complete all as specified and directed . Make - CG/Havells/Philips/Bajaj
S&F MCB DB CRCA sheet powder coated SPN 8 way double door factory made suitable for incorporating MCB as out going connecting incoming and outgoing cables incl taking out existing unsv DB of any size and making good disturbed surface to match with existing complete all as specified and as directed. Make : Havells/L&T/ABB/Schneider/Legrand
S&F MCB SPN having braking capacity 10 KA. 35 to 60 Amp, 240 volts C curve including taking down unserviceable complete all as specified and as directed. Make : Havells/L&T/ABB/Schneider/Legrand
S&F MCB single pole having braking capacity 10 KA, 6 to 32 Amps 240 volts including taking down unserviceable complete all as specified and as directed. Make : Havells/L&T/ABB/Schneider/Legrand
S&F 1100 volts grade heavy duty flat twin core cable PVC insulated with stranded aluminium conductor of size 16 sqmm and overall PVC sheathed in service connections incl dismentling taking down unserviceable one all as specified and directed.
Earthing complete with galvanised steel earth electrode plate of size 600x600x6mm thick, buried directly in ground (earth pit nbot less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.50m below notmal ground level, connected to galvanised earth lead wire 4.0mm dia by means of suitable GI nuts/bolts and brazed properly up to main board including earth pit in cement concrete 1:2:4 type B-1, precast RCC cover in 1:2:4 reinforced with expanded metal, with suitable handle, excavation and earth work in any type of soil and including medium grade GI watering pipe 25mm bore with funnel wire mesh and medium grade GI wire protection pipe 25mm bore up to main board complete as shown in electrical plate No 3 of MES schedule Part-I 2009, connected to earthing testing point including taking out existing unsv earthing complete all as specified and testing on completion complete all as specified and as directed. Note:- The units rate including the cost of excavation & earth work in any type of soil, charcoal & salt in alternate layers, 25mm GI pipe (light grade) for watering 25mm GI protection pipe (light grade) funnel wire mesh PCC chamber in PCC 1:3:6 type C-1 cast iron frame and 40mm thick RCC cover for pit etc & no extra payment will be made.
M/S R N ENTERPRISES
M/S POLAR AGENCIES
M/S NIRMAL TRADERS
M/S DKT CONSTRUCTION
M/S ASHOK CONSTRUCTION
M/S R D TRADERS
M/S RARAI ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .