Erode District Sivagiri Town Panchayat NSMT 2022-2023

Amount

Providing and laying Tack Coat over Existing BT surface (treated with primer) using 2.00Kg of Bitumen Emulsion (RS1) per 10sqm for preparatory to another bituminous construction over it including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per Clause 503 of MORTH Rev-5

Providing and laying 50mm Consolidated thick Dense Bituminous Mecadam using 0.24 cum of 26.50 – 13.20 mm Graded metal and 0.25 cum of 13.20 – 2.36 mm Grade metal and 0.23 cum of 2.36 mm & below with 53.20 kgs of 60/70 Grade Bulk bitumen for premixing per 10 Sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregates to required temperature and mixing them in required temperature in central hot mix plant 20 – 30 ton capacity, Conveying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 50 mm with mechanical pavers to the specified grades and cross sections and compaction by Vibratory/Pneumatic rollers to the required density etc., including labour for loading bitumen into bitumen tank and Metal to feeder unit, labour for attending to paver site etc., including hire charges and fuel charges for 20 – 30 ton CMP With bitumen boiler tipper,trucks, paver Finisher/9M, Vibrator rollers and all other tools and plants required,including all other incidental charges etc., complete as per standard specification using CMP Clause 505 of MORTH Rev-5

Providing and laying Bituminous Concrete to 30mm thick using 0.13cum of 19.00-9.50mm, 0.17cum of 9.50-2.36mm and 0.26cum of 2.36 and below with 45.27 kgs of VG30( 60/70) bitumen and 5.03 Kg of Shredded plastic for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing them in required temperature in central hot mix plant 20-30t on capacity, conveying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 40mm with mechanical paver to the specified grades and cross sections and consolidated by 8-10 tonne Vibratory/Pneumatic Roller to the required density etc., including labour for attending to paver to site etc., including hire charges and fuel charges for 20-30t CMP with bitumen boiler, tipper trucks, Paver Finisher/9mpaver finisher, Vibratory/Pneumatic roller and all other tools and plant required, including fuel and all other incidental charges etc., complete as per specification using CMP as per clause 507 of MORTH Rev-5

Identification signs " Providing and erecting Direction and place identification Retro Reflectorised signs made out of cube cornermicro prismatic Grade sheeting confirming to Type XI standrads of IRC 67 2012 and ASTM D 4956 - 09 Specification and fixed over 2mm thick Aluminium sheet fixed over a black supporting frame of 25mm x 25mm x 3mm mild steel angle Post 75x75x6mm with a clear height of not less tan 2.10m from the ground level to the bottom of the sign board and 0.60 m below ground level. The sig post should be painted as per IRC 67-2012 and firmly fixed to thye ground by means of properly designed foundation with bM15 grade cement concrete 45cmx45cmx60cm size including cost and conveyence of all materials equipment, machinery and labour with all leads and lifts, loading charges necessary for satisfactory completion of the work as directed by the Engineer in charge, Micro Prismatic grade Rectro - Reflection as per Table 6.9 of IRC 67-2012. The rectro reflective sheeting shall be covered under 10 year warranty issued for field perfomance and a certified copy of three years outdoor exposure report shall be obtained as per IRC67-2012 specification (for location of black spot, curve, sharp bed junction, ghat roads and critical applications)

chandrasekaran

KOUSIC CO