COMPREHENSIVE MAINT TO BR SERVICES IN CERTAIN CENTRAL LOCATIONS UNDER AGE(I) AYODHYA CANTT

Amount

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubish of the premises all as specified and directed.

M&L for glazed ceremic coloured tiled in vertical surfaces wall cladding 450x350x7mm thick over and ncluding rendering 10mm thick in cement mortar 1:4, set and jointed in neat cement slurry and pointed in white or colour cement to match complete as specified and directed by Engr-in-Charge. Note :- Colour and design of tiles shall be approved by Engineer-in-Charge.

M&L for light shade Vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile not exce 0.36 sqm each, laid in floors over and including 15mm thick in cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match comptete all as specified and directed by Engr-in-charge. Note :- Colour and design of tiles shall be approved by Engineer-in-Charge.

M&L for double charged light shade Vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, over and ncluding rendering 10mm thick in cement mortar 1:4, set and jointed in neat cement slurry and pointed in white or colour cement to match complete as specified and directed by Engr-in-Charge.. Note :- Colour and design of tiles shall be approved by Engineer-in-Charge.

M&L for double charged dark shade Vitrified ceramic tiles 10mm thick (square/ rectangular) area of each tile exc 0.42 Sqm,lbut not exc 1.00 Sqm each, laid in floors over and including 15mm thick in cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match comptete all as specified and directed by Engr-in-charge. Note :- Colour and design of tiles shall be approved by Engineer-in-Charge.

M&L for d double charged dark shade Vitrified ceramic tiles 10mm thick (square/ rectangular) area of each tile exc 0.42 Sqm,lbut not exc 1.00 Sqm each, over and ncluding rendering 10mm thick in cement mortar 1:4, set and jointed in neat cement slurry and pointed in white or colour cement to match complete as specified and directed by Engr-in-Charge.. Note :- Colour and design of tiles shall be approved by Engineer-in-Charge.

M&L for 20 mm thick Granite stone slab of any type (table rubbed and polished) as in steps, jambs, pillars, window-cills, cooking platforms and the like over and including 5mm thick screed bed or bedding layer in cement mortar (1:6), set in neat cement slurry and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including complete as specified and directed by Engr-in-Charge..

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations, complete as specified and directed by Engr-in-Charge.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15 cm thickness (below or above ground level) complete as specified and directed by Engr-in-Charge.

ML for 75 mm thick PCC (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in sub base and the like complete as specified and directed by Engr-in-Charge..

Dismantling plain or corrugated steel sheeting, any gauging, thickness, in roof covering complete all as speciifed and directed.

S&F Pre-painted galvalume aluminum zinc coating PPGL based corrugated/ trapozoidal steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating PPGL based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall eave board , fixed with self tapping screws, complete all as specified and directed.

Dismantling of timber scantling 40 sqcm and over in section fixed in framed work in any position complete all as specified and directed.

M&L for mild steel work as in tubular trusses, railing, grills etc including special shaped washer etc using ERW or induction butt welded tube complete all as specified and directed by Enger-in-Charge.

M&L for preparing new steel and iron surfaces of any description over cm with or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Enger-in-Charge.

Taking down chowkats with shutters not exc 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and directed by Engineer-in-charge.

S&F factory made uPVC white colour three track panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of frame 110 x 45mm & sash bars 40 x 62 mm both having wall thickness of 2.3 + 0.2 mm and single /double glazing beads of approproate dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 + 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg) G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessry stainless steel screws etc. Profile frame & sash sall be mitred cut and fusion weled at all corners including drilling of holes for fixing hardwares and drainage of water etc. After fixing frame, the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality. complete all as specified and directed by Engineer- in Charge.

Note: -(i) Glazed shutters float glass thickness not less than 5.00 mm and Gauzed shutter with Stainless steel wire mesh 0.36 mm dia with aparture 1.40 mm shall also be deemed included in quoted rates and No extra payment will be made separately. (ii) uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e in depth & width of profile shall be acceptable. Variation in profile dimensions in higher side shall be accepted but no extra payment on this account shall be made. (iii) The windows shall be approved by Engr-in-Charge before fixing in position.

Taking down chowkhats or frame with shutters (without taking off shutters from the frame) exc.1.50 Sqm but n.exc.4.00 Sqm each complete all as specified and directed by Engineer-in-charge.

S&F 12 mm toughned glass as in hinged door, partition, automatic doors and similar work including cutting to shape, drilling holes complete all as specified and directed by Engineer-in-Charge.

S&F in repairs, 25 mm dia stainless steel curtain rods with decorative end knobs and brackets, fancy type, complete all as specified and directed by Engr-in-Charge.

Dismantling of wall & celling boards (fiber pulp insulation etc) or insulation boards/ slabs/ blankets any thickness, including cover fillets all as specified and directed.

S&F 5 mm thick Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications complete all as directed by Engineer-in-charge.

S&F 30mm thick perprelam perforated PVC false ceiling panel made of 5mm wall thickness PVC perforated sheet of size 600x600mm on glass wool 5.00mm (+ 0.25)prelaminated perforated PVC sheet of density 600Kg/cbm manufactured by an ISO -9001-2015 certified company, is stuck with glass wool on one side with suitable adhesive. The panel is inserted in the frame made of anodised Aluminium / GI 'T' Section of size 1"x1" (25mmx25mm) in square type grid of size 2'x2' (600x600mm)., The aluminium/GI frame work is supported from the ceiling with the help of 'J' hook and GI wire of mm dia or 6mm dia MS bars of required sizes to maintain proper level. The aluminium / GI frame work is supported on side wall with the help of aluminium GI angle section of size 1"x1" (25mmx25mm) complete all as per manufacturer's instructions, shown on drg and directed by Engr-in-Charge.

S&F aluminium composite panel sheet 3mm thick for wall /ceiling of the tray panel screw type system. Aluminium composit panel of approved colour on exterior wall, ACP soffit, coping, slab, projection at all heights and elevation including necessary aluminium framework complete all as specified and directed by Engr-in-Charge.

SF 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and directed by Engr-in-charge.

M&L for preparing old decorated surfaces by complete removal of existing decorative treatment of any description on wall surfaces and applying wall care putty minimum 1.5 mm thick and two coats of distemper oil emulsion over a coat of primer, complete all as specified and as directed.

M&L for preparing old decorated surfaces by complete removal of existing decorative treatment of any description on wall surfaces and applying 1.50mm thick wall care putty and two coats of weather proof exterior emulision (APEX of Asain paint or equivalent) complete all as specified and directed.

Taking down cement plaster from brick or stone walls any description including racking out joints, hacking for key, scrubbing down with water to receive plaster of rubbish off the premises etc.complete all as specified and directed.

M&L for 15 mm thick rendering on fair faces of brick work or concrete surfaces of walls in cement mortar (1:4) mixed with WPC @ 3%, finished even and smooth without using extra cement complete all as specified and directed. Note: WPC shall be measured and paid for separtely at supply only rates.

M&L for preparing newly plastered surfaces of walls and applying two coats of Acrylic smooth exterior paint of required shade @ 1.67 ltr/10 Sqm over a coat of exterior primer applied @ 2.20Kg/10Sqm complete all as specified and directed.

Supply only integral WPC (Water Proofing Compound) of approved make complete all as specified and directed by Engr-in-charge.

M&L for 10 mm thick rendering in cement mortar (1:6) on fair faces of brick work or concrete surface of internal walls, finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.

M&L for preparation of newly plastered or previously untreated surfaces of walls and applying two coats of oil bound distemper on walls over a coat of 1mm thick wall care putty, complete all as specified and directed. Note: Approval of Engr-in-Charge shall be obtained by the contractor before applying finishing work.

Demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar complete all as specified and directed.

M&L for brick work with old size sub class 'B' bricks in cement mortar (1:6), straight or curved on plan exc 6 m mean radius complete all as specified and directed.

S&F Powder coated (minimum thickness of powder coating 50 micron) anodised aluminium frames for door, windows, ventilators, partitions etc. with one or more rebates including joining cleat for fixing etc complete all as specified and directed by Engr-in-charge.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Charge.

S&F 18/19mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber / aluminium frame complete all as specified and directed by Engr-in-charge.

S&F floor door stopper 150 mm long of alluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all as specified and as directed.

S&F 100mm size brass Mortice lock, 4 levers, vertical type, ccomplete all as specified and directed by Engr-in-charge.

S&F in repair, double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed by Engr-in-Charge.

S&F 150 mm Aluminium handles, cast type,anodised all specified and directed.

S&F 125 mm butt hinges, heavy weight, cold rolled mild steel and fixed all specified and directed.

S&F in repair, aluminium extruded section door closer hydraulicaly regulated designation No. 3 Universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg, complete all as specified and directed by Engr-in-Charge.

His And Her Enterprises

J R ENTERPRISES

K R KAUSHAL AND SONS

Jairajyadav security services

M/S AVADH ENTERPRISES

MISRA TRADING CORPORATION

Jaya Construction

JYOT BUILDERS

Khan Brothers