Loading…
Loading…
Tender Value
₹97.5 L
EMD Value
₹1.9 L
Closing Date
22 Sept 2026, 3:30 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
DY. CSTE
15 conditions · 4 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or V whichever less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIII, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
(a)The tenderer must have successfully completed or substantially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work each costing not less than the amount equal to 60% of advertised value of the tender. (b) (i)In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note: for b (i) separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. (b) (ii)In such cases, what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity. (b) (iii) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contract or through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility. Such subcontractor must fulfill technical eligibility criteria as follows: The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be subletted, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract. Note: for subletting of work costing up to Rs 50 lakh, no previous work experience of subcontractor shall be asked for by the Railway
In case after award of contract or during execution of work it becomes necessary for contractor to change subcontractor, the same shall be done with subcontractor(s) fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract, with prior approval of Chief Engineer in writing. Note for Item 10.1: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered atleast 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Similar Nature of work: - "Any Telecom Work"
2 conditions
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
I/We have visited the works site and I/We am/are aware of the site conditions.
DY. CSTE GSU JP Div.:- Telecom work in Connection with construction of new Station Building, extension of FOB, Circulating Area, construction of one longer loop line with PF at Dahar ke Balaji(DKBJ) station over Jaipur Division.
GSU-Snt-JP-2026-27-05RR~NWR
GSU-Snt-JP-2026-27-05RR
Open
Works - General
12 Months
Jaipur, Rajasthan
₹0
₹1.9 L
26 Aug 2026
26 Aug 2026
8 Sept 2026
75 items across 1 schedule · ₹66,54,995.09 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Supply of maintainer's furniture of Godrej make or superior and each set consist of (i) executive revolving bearing series low back-floating chair with normal arms cushioned chair-01 Nos. (ii) Executive table size 1650x900x728 mm with 3 drawers one side locker- 01 no. (iii) visitor chair seat & back cushion with high density foam with plastic PVC handle capsule type painted back-03 nos. Inspection: Consignee Inspection charges: None Payment terms:100% after execution. | Set | 1.00 | 27,664.71 | 27,664.71 |
| 2 | Supply of 1 x 10 Sqmm (Red/Black/Green) multi strand copper power wire as per IS:694:2010 or latest, 140 conductor each dia 0.30 +/- 0.01 with insulation thickness of 1.0 mm and nominal conductor resistance of 1.91 ohms/km and test parameters as per RDSO Specn.No.IRS:S- 76/89(Amnd.3) or latest. Colour of the wire which is required will be specified by the Engineer incharge. Inspection: (i) RDSO/RITES if value of item in work more than 10 lakhs (ii) Consignee subject to procurement from RDSO approved vendors if value of whole item in work less than 10 lakhs as per extant instructions by Railway Board. Inspection Charges: (i)Borne by Railways (ii) None Payment Terms: 100% on Supply | Metre | 100.00 | 69.24 | 6,924 |
| 3 | Supply of 1 x 35 Sqmm (Red/Black/Green) multi strand copper power wire as per IS:694:2010 or latest, 277 conductor each dia 0.40 +/- 0.01 with insulation thickness of 1.2 mm and nominal conductor resistance of 0.554 ohms/km and test parameters as per RDSO Specn.No.IRS:S- 76/89(Amnd.3) or latest. Colour of the wire which is required will be specified by the Engineer incharge. Inspection: (i) RDSO/RITES if value of item in work more than 10 lakhs (ii) Consignee subject to procurement from RDSO approved vendors if value of whole item in work less than 10 lakhs as per extant instructions by Railway Board. Inspection Charges: (i)Borne by Railways (ii) None Payment Terms: 100% on Supply | Metre | 100.00 | 212.94 | 21,294 |
| 4 | Supply of Medium class GI pipes 100 mm Dia (4.5 mm thickness) as per IS 1239 (Part 1): 2004 with coupling on culverts bridges as per Drg. No. CSTE/NWR/SOR/06 to 12 or at any other locations as decided by Site Engineer. It includes supply of all material required for fixing arrangement. Contractor will also supply flexible/corrugated HDPE pipe at the end of GI pipe to protect the cables from sharp edges and sudden bends. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after Supply. | Metre | 50.00 | 915.45 | 45,772.5 |
| 5 | Fixing of Medium class GI pipes 100 mm dia(4.5 mm thickness) as per IS 1239 (Part 1): 2004 with coupling on culverts bridges as per Drg. No. CSTE/NWR/SOR/06 to 12 or at any other locations as decided by Site Engineer. It includes installation of all material required for fixing arrangement. Contractor will install flexible/corrugated HDPE pipe at the end of GI pipe along with any masonry work (if required) to protect the cables from sharp edges and sudden bends. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after installation. | Metre | 50.00 | 228.87 | 11,443.5 |
| 6 | Supply of Medium class GI pipes 50 mm Dia (3.6 mm thickness) as per IS 1239 (Part 1): 2004 for use in ASM room and at any other location as decided by Site Engineer. It includes supply of all material required for fixing arrangement. At the ends of GI pipe, flexible/corrugated HDPE pipe will be provided by contractor to protect cables from sharp edges and sudden bends. Inspection: Consignee Inspection Charges: None Payment Terms: 100% after Supply | Metre | 60.00 | 469.99 | 28,199.4 |
| 7 | Fixing of Medium class GI pipes 50 mm Dia (3.6 mm thickness) as per IS 1239 (Part 1): 2004 for use in ASM room and at any other location as decided by Site Engineer. It includes installation of all material required for fixing arrangement. At the ends of GI pipe, flexible/corrugated HDPE pipe along with any masonry work (if required) will be provided by contractor to protect cables from sharp edges and sudden bends. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after Installation. | Metre | 60.00 | 117.5 | 7,050 |
| 8 | Length wise (up to 2 cables). | Running Metre | 1500.00 | 17.81 | 26,715 |
| 9 | Supply of Double Walled Corrugated (DWC) HDPE Pipe/duct with associated collars etc. as per RDSO Specification No. RDSO/SPN/204/2011 or latest anti-rodent & anti-oxidant and non-flame propagating type in 6 meters straight length and of size 120 mm outer Dia & 103.5 mm inner dia. (The manufacturers, suppliers must produce valid IS license and should be certified under ISO 9000 and shall submit copy of certificate). One of the following coupling arrangements should also be supplied with each pipe as per the site requirement.1) Suitable snap fit coupler with rubber O-Ring 2) Spacers3) Tees4) Bend,5) End-cap(The total quantity of above items is equal to no. of pipes supplied.)DWC pipe shall be marked at every 1 mtr length in such a way that manufacturer's name, vendor name and year of manufacture can be easily identified. Inspection: (i) RDSO/RITES if value of item in work more than 10 lakhs or as per extant policy (ii) Consignee subject to procurement from RDSO approved vendors if value of whole item in work less than 10 lakhs or as per extant policy Inspection Charges: (i)Borne by Railways (ii) None Payment Terms: 100% after Supply | Numbers | 10.00 | 2,164.13 | 21,641.3 |
| 10 | Supply of Thermo shrink Universal Jointing kit for Quad Cable (for straight joints) as per RDSO spec IRS/TC-77/2012 revision 3 With latest Amd. Inspection: RDSO Inspection Charges: Borne by Railways Payment Terms: 100% after Supply | Numbers | 55.00 | 2,586 | 1,42,230 |
| 11 | Jointing of 4 / 6 quad /Signalling cable with Heat Shrinkable straight through Jointing Kit. All the material required for the work are to be arranged by contractor himself at his own cost except Thermo shrinkable Joint Kit/Rapid Joint kit. After jointing the cable through test such as insulation test, continuity cable losses etc. to be carried out jointly with Railway Engineer. If any defect or any damage is observed during jointing, the contactor has to redo the joint free of cost. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after Execution | Numbers | 10.00 | 1,392.99 | 13,929.9 |
| 12 | Horizontal direction drilling/boring without damage of surface road /track using Auger Machine (HDD machine) or by Closed trench Method. The bore shall be upto 200 mm Dia & shall be done at the depth of minimum 1200 mm from the ground level. The ground level shall be considered ignoring the bank height of the bank of the road. The length of the bore shall be minimum 4 Mtrs long. This includes insertion of different Dia DWC-HDPE pipe/ GI pipes coupling etc. as per direction of Engineer In charge. Note: - Pipe Supply is not covered under this item. Contactor shall provide all material required for boring and adequate nos. of labours for proper laying of cables into the bore. Cable shall be laid cautiously so that it should not get damage due to rough handling & pressure on cable. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after Execution | Metre | 470.00 | 1,447.77 | 6,80,451.9 |
| 13 | Digging of trench 1.2 Mtrs. deep from rail flange/ road level and 0.3 Mtrs to 0.6 Mtrs wide and back filling after placing of DWC/ RCC/GI pipe. (Placing of DWC/RCC/GI pipe covered separately). The ballast disturbed be screened and dressed as required by Engineer-in-charge or his representatives and road tarred immediately. For track crossing, Drg. No. CSTE/3644 Pg.7 of 11 and for Road Crossing, Drg. No. CSTE/3644 Pg. 5 of 11 are to be followed. (cum is Cubic Meter) Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after Execution | cum | 2000.00 | 330.1 | 6,60,200 |
| 14 | Digging of cable trench 0.3 Mtrs. Deep and 0.3 Mtrs. Wide on Asphalted Platform / Road / Hard rocky area. Refilling with earth levelling of trenches & restoring the original surface of trenches. The sharp edges will be smoothened out in bottom of the chase and will be levelled properly. In hard rocky ground area, cables will be laid normally on layer of shifted earth of 0.05 mtrs thickness previously deposited at bottom of the trench and cables will be covered with layer of sand or shifted earth of 0.1 mtr thickness. In case sharp edges of rocky ground cannot be protected from shifted earth then GI/ CI /PVC /DWC/ HDPE pipes will be used, if numbers of cables are small. In case number of cables are large RCC duct will be used. In isolated cases, it can be given smooth surface by using either masonry bricks or cement concrete. A row of bricks shall then be placed length wise on the top and jointed with cement mortar and layer of concrete with cement plaster shall be provided on top of the same. Note: This item in hard rocky area will be operated only where normal depth i.e.l.2 mtr is not possible and it will be decided by site engineer/unit officer incharge of work. (cum is Cubic Meter) Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after Execution | cum | 200.00 | 605.41 | 1,21,082 |
| 15 | Laying of S&T Cables of various cores/ pairs/ quads in trenches/ GI pipes/ RCC pipes/ DWC pipes/ Trunking. This also includes laying of cables in track crossings & road crossings. Item includes provision of labels of coloured plastic adhesive tapes or any other identifiable material on each cable to give the cable number at each Gantry Post/hectometer post. (Cables will be meggered before and after its laying by contractor under supervision of Railway Representative and he will submit the meggering report of each testing). Length of the cable laid includes the length of the cable coiled for termination purposes. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after Execution | Running Metre | 6000.00 | 10.95 | 65,700 |
| 16 | Supply of basic material to construct unit maintenance free earth as per RDSO Specs. No. RDSO/SPN/197 Version 1.0 dtd. 04.07.2016 or latest and conforming to RDSO Drg. No. SDO/ RDSO/E&B/001. It consist of following: (a) Copper bonded steel electrode of 3.0 m long, 17 mm Dia with copper bonding thickness of minimum macrons and UL listed and marked = 1 no. (b) Earth enhancement material supplied in sealed bags of minimum 10 kg = 3 nos. (c) Copper strip of 150x25x6 mm, to terminate earth rod = 1 no. (d) Copper strip of 300x25x6 mm (MEEB) = 1 no. (e) Copper strip of 150x25x6mm (SEEB) = 1 no. (ii) Supply of 35 sq. mm multi strand single core PVC insulated copper cable as per IS: 694 for connecting main earth electrode to MEEB in the equipment room in duplicate. (minimum 10 meter) (iii) Supply of 16 sq. mm multi strand single core PVC insulated copper cable as per IS: 694 for connecting MEEB to SEEB and SPD to MEEB (minimum 10 meter ) (iv) Supply of 10 sq. mm multi strand single core PVC insulated copper cable as per IS: 694 for connecting various equipments to SEEB (v) Supply of copper lug sleeve for 3/16 cable Inspection: RDSO Inspection Charges: Borne by Railways Payment Terms: 100% after Supply | Lot | 4.00 | 21,098.23 | 84,392.92 |
| 17 | Installation of Unit Maintenance Free Earth as supplied under item no. 13010300 above It includes: ( i ) Digging the earth to the required depth. (ii) Insertion of electrode. (iii) Filling of earth enhancing compound (Approx.30 Kg) (iv) Provision of exothermic weld connections to copper tape of 25 mm x 6 mm x 150 mm to the earth electrodes. All material tools and features required for weld will be arranged by contractor. (v) This also includes CC cover 1.5 ft x 1.5 ft. 1 ft wall thickness 2 inch with cover 3-inch thickness. Cables 35 Sq mm/ 16 Sq mm/10 sq mm for connecting earth to busbar, busbar to busbar and busbars to various equipments. Earth electrode of 17.20 mm Dia and 3.00 meter long high tensile low carbon steel circular rods molecularly bonded with copper and outer surface (minimum copper bonding thickness of 250 microns to made requirement of under writer's laboratories (UL) 467-2007 or latest. Copper strips of 150 mm x 25 mm x 6 mm to be welded with each earth electrode, copper strips of 300 mm x 25 mm x 6 mm for main equip- potential busbar, copper strips of 150 mm x 25 mm x 6 mm sub equip-potential busbar in relay room, power room and panel room. GI strip 25 mm x 2 mm for ring formation of earth pits Earth enhancement material in bags for each Earth Electrode. Inspection chamber of site 300 mm x 300 mm x 300 mm (Inside dimension) of approximate 50 mm thick with pulling hooks to cover the earth pits. Note: The installation of this item shall be carried out by the contractor as per RDSO/SPN/197 Version 1.0 dtd. 04.07.2016 or latest and conforming to RDSO Drg. No. S DO/RDSO/E&B/001 or latest. Inspection: Consignee Inspection Charges: None Payment Terms: 100% after execution and testing. | Set | 4.00 | 9,461.53 | 37,846.12 |
| 18 | Supply of Professional AC/DC clamp meter 3 ¾ digit, true RMS measurement, For Measurement of DC/AC currents up to 60A, AC/DC Voltage up to 600V, resistance up to 40 M, Current resolution 0.1mA for low current measurements, frequency up to 60 KHz and non-contact voltage measurement function with set of leads & carrying case. Model - SCM222 or equivalent/ higher make. Motwane/Stanlay/Fluke/Megger Inspection: Consignee Inspection Charges: None Payment Terms: 100% after Supply. | Numbers | 3.00 | 16,784.35 | 50,353.05 |
| 19 | Supply of Handheld Digital Earth Clamp Tester for clamp on earth/ground resistance measurement up to 1000 ohms. Accuracy 0.1 - 0.99 : 1%, 1 - 49 : 1.5% Also measure current leakage up to 20A. No spines required for measurement Model - DECT-2 or CET500 or equivalent / higher version make Motwane/Stanlay/Fluke/Megger. Inspection: Consignee Inspection Charges: None Payment Terms: 100% after Supply. | Numbers | 1.00 | 1,02,122.34 | 1,02,122.34 |
| 20 | Supply of electronic Cable route tracer/locator with underground cable and pipe locating receiver and cable avoidance tool that provide location of armoured OFC, signalling and telecom, power cable etc. Model RD8200G or STLOC10GPS equivalent or superior. Minimum specifications- Battery life- 24 hours continuous use, Backlit LCD display, IP65, multi-frequencies -12 frequencies, Variable pitch & live sound, Depth Measurement- upto 10meters depth, digital 3-digit LCD readout with ± 3% accuracy. Datalogging with export facility to .csv/excel formats. Transmitter output power- 10W with multiple power setting options, Warranty-3 years. Inspection: RITES Inspection Charges: Borne by Railway Payment Terms: 100% after Supply. | Numbers | 1.00 | 5,00,975.83 | 5,00,975.83 |
| 21 | Supply of Digital Cable Insulation Tester for measurement of cable insulation resistance with auto range 0-500 V DC. Modal: SIT 500 equivalent or superior from any reputed make Fluke or Megger or Stanone or Superior. Inspection: Consignee Inspection Charges: None Payment Terms: 100% after Supply. | Numbers | 2.00 | 10,457.72 | 20,915.44 |
| 22 | Supply of Digital Earth Resistance Tester for measurement of earth resistance with 3.5 digital LCD, 12.5 mm screen segment and Range -0.5 Ohms to 500 Ohms. Accuracy- ±2%. WACO or from any repudiated make. Inspection: Consignee Inspection Charges: None Payment Terms: 100% after Supply. | Numbers | 1.00 | 10,540.73 | 10,540.73 |
| 23 | Supply of Safety lock Godrej or Navtal make size as approved by site engineer. Inspection: Consignee Inspection Charges: None Payment Terms: 100% after Supply | Numbers | 20.00 | 134.72 | 2,694.4 |
| 24 | Supply of STP (Shielded Twisted Pair) CAT-6 Cable compliant with TIA/EIA-568-B2-1 or latest. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after Supply. | Metre | 2500.00 | 40 | 1,00,000 |
| 25 | Supply of 5m length FC to SC Single Mode Simplex/Duplex Fibre Optic Patch Cable as per TEC Specifications TEC 87070:2009 (TEC/GR/TX/OFJ-01/05/NOV-09). Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after Supply. | Numbers | 20.00 | 164 | 3,280 |
| 26 | Supply of SC-APC/SC-APC patch cord (1 meter) (3M, TE connectivity, R&M make or superior) as per TEC Specifications TEC 87070:2009 (TEC/GR/TX/OFJ-01/05/NOV-09) Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after Supply. | Numbers | 20.00 | 143.87 | 2,877.4 |
| 27 | Supply, preparation, splicing and installation of straight joint for 24 fibers along with enclosures with heat shrinkable splice protection sleeve as per TEC Specn. TEC 87080:2025 or latest. Splice losses in no case should be more than 0.1 dB. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after Execution. | Numbers | 4.00 | 13,672.69 | 54,690.76 |
| 28 | Supply, preparation, splicing and installation of straight joint for 48 fibers along with enclosures with heat shrinkable splice protection sleeve as per TEC Specn. TEC 87080:2025 or latest. Splice losses in no case should be more than 0.1 dB. Inspection: Consignee Charges: None. Payment Terms: 100% after execution. | Numbers | 2.00 | 14,871.17 | 29,742.34 |
| 29 | Supply of permanently Pre-lubricated HDPE duct, 40 mm OD, 33 ID as per RDSO specification No. RDSO/SPN/TC/45/2013 Rev. 2.0 Amdt. 3 or latest. The item also includes supply of all the accessories of HDPE duct like end caps, collars, bends, couplers etc. Inspection: (i) RDSO/RITES if value of item in work more than 10 lakhs (ii) Consignee if value of whole item in work less than 10 lakhs as per extant instructions by Railway Board. Inspection Charges: (i)Borne by Railways (ii) None Payment Terms: 100% on Supply | Kilometre | 2.50 | 58,145.01 | 1,45,362.53 |
| 30 | Laying of permanently Pre-lubricated HDPE duct, 40 mm OD, 33 ID as per RDSO specification No. RDSO/SPN/TC/45/2013 Rev. 2.0 Amdt. 3 or latest. The item also includes installation of all the accessories of HDPE duct like end caps, collars, bends, couplers etc. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after Execution. | Kilometre | 2.50 | 14,536.25 | 36,340.63 |
| 31 | Blowing/drawing of OFC cables in the HDPE duct along with all the protective work as per instructions of engineer incharge at site. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after Execution. | Kilometre | 2.50 | 13,003.54 | 32,508.85 |
| 32 | Construction of Brick Chamber/RCC of optical fibre cable straight through joint as per Drg. No. CSTE/NWR/ SOR/23. It also includes supply and provision of all the material required for this item like bricks, sand, cement etc. The cement and sand should be in ratio 1:6. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after Execution. | Numbers | 6.00 | 6,335.07 | 38,010.42 |
| 33 | Supply of Fibre Distribution Management system (FDMS)/LIU for 12 Fiber complete with all accessories such as patch cord & pigtail as per TEC Spec. GR/FDM/01/02 April'2007 or latest. This includes supply of installation accessories as per technical specification. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after supply. | Numbers | 5.00 | 2,604 | 13,020 |
| 34 | Installation, splicing and commissioning of Fibre Distribution Management system (FDMS) for 12 Fiber complete with all accessories with patch cord & pigtail as per TEC Spec. with latest amendment. The sundry material if required any to be supplied by contractor. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after Execution. | Numbers | 5.00 | 2,086 | 10,430 |
| 35 | Supply of 10 Pairs Krone type D.P. box as per Tech spec, make Hensel or superior. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after Supply. | Numbers | 2.00 | 1,483.52 | 2,967.04 |
| 36 | Fixing and wiring of 10 Pairs Krone type D.P. box as per Tech spec, make Hensel or superior. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after execution. | Numbers | 2.00 | 370.88 | 741.76 |
| 37 | Supply of 20 Pairs Krone type D.P. box as per Tech spec, make Hensel or superior. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after Supply. | Numbers | 6.00 | 2,362.57 | 14,175.42 |
| 38 | Fixing and wiring of 20 Pairs Krone type D.P. box as per Tech spec, make Hensel or superior. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after execution. | Numbers | 6.00 | 590.64 | 3,543.84 |
| 39 | Supply of DLP trunk 32X20mm with required all changeable internal/external angle, changeable flat angle, flat junction. Clips, joint for cover, end cap etc. make Legrand or superior. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after Supply. | Metre | 200.00 | 133.43 | 26,686 |
| 40 | Fixing & wiring (Laying) of DLP trunk 32X20mm with required all changeable internal/external angle, changeable flat angle, flat junction. Clips, joint for cover, end cap etc. make Legrand or superior. Cable will be supplied by Railway and all other fixing material will be supplied by contractor. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after execution. | Metre | 200.00 | 33.36 | 6,672 |
| 41 | Supply of frame, surface box and white cover plates for Two modules. This also includes supply of RJ-11 Telephone sockets with level holder Jack type, RJ-45 LAN sockets Jack Type (Tool less) and blanking plates for one module. Make: Legrand or superior. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after Supply. | Numbers | 40.00 | 688.35 | 27,534 |
| 42 | Fixing of frame, surface box and white cover plates for Two modules. This also includes fixing of RJ-11 Telephone sockets with level holder Jack type, RJ-45 LAN sockets Jack Type (Toolless) and blanking plates for one module. Make: Legrand or superior. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after execution. | Numbers | 30.00 | 172.09 | 5,162.7 |
| 43 | Supply of 12 Fibres Metal Strengthened Outdoor Unarmoured Optic Fibre Cable. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after supply. | Metre | 1200.00 | 19 | 22,800 |
| 44 | Supply of power cable 3 core 2.5 sq mm multi strand (36/0.3 mm dia) sheathed flexible cable as per IS 694:2010 or latest suitable for railway electrification area shall be of reputed make like Delton, LAPP, Finolex, or superior. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after supply. | Metre | 2600.00 | 100 | 2,60,000 |
| 45 | Supply of 2 core screened/shielded multistrand PVC insulated wire (24/0.2 mm dia) for speaker load line. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after supply. | Metre | 3200.00 | 42.39 | 1,35,648 |
| 46 | Supply of Single Fibre Fusion Splicer Similar to Fujikura 80C with Standard Accessories : AC ADAPTER /BATTERY Charger ADC-18 1PC, AC Power Cord ACC-XX: 1PC, Spare electrode Elect 2- 20:1 pair carrying case CC-30:1PC, USB cable USB-01: 1PC, Sleeve loader SL01:1 PC, dispenser AP-01: 1 PC, screw driver SC-01 1PC, Instruction manual: 1 PC, Quick reference Guide 1PC, warning & cautions: 1 PC, BATTERY RACK BRT-09, Battery charger cord DCC- 18: 1 PC, High precision Fibre cleaner CT-06: 1 PC, 3 in-1 Stripper : 1PC & Protection sleeves: 25nos. Dual monitor position with automatic image orientation, Automatic arc calibration with clever, adaptor, sheath clamp etc as per TEC Specifications TEC 88090:2024 or l a t e s t . Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after Supply. | Numbers | 1.00 | 4,44,902 | 4,44,902 |
| 47 | Supply of Standing wave power meter for measurement of RF power and SWR in 5 watt and 25-watt VHF set frequency range 1.8 to 200 MHz with UHF female connector with connecting cable for measurement of power and Dummy load. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after Supply. | Numbers | 1.00 | 18,433 | 18,433 |
| 48 | Supply of 12U Rack conforming to IEC 60297, with 19-inch standard dimension, wall mounting, front glass door with lock and two key, with rack fixing Multi point AC power strip, cable organiser with wall fixing screws. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after Supply. | Numbers | 6.00 | 7,179 | 43,074 |
| 49 | Supply of 9U Rack conforming to IEC 60297 with 19-inch standard dimension, wall mounting, front glass door with lock and two key, with rack fixing Multi point AC power strip, cable organiser with wall fixing screws. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after execution. | Numbers | 2.00 | 6,153 | 12,306 |
| 50 | Installation, testing & commissioning of 2U/3U/4U/6U/9U/12U rack with 19-inch standard dimension as per instruction of Engineer in charge. It includes supply of all the accessories for fixing of the same. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after execution. | Numbers | 8.00 | 503 | 4,024 |
| 51 | Supply of integrated Access Multiplexer 4U height/19" Rack mountable with 4 DTE (1+1) protection E1 interfaces & V.21/V.23 Modules supporting 8 Interface of (2W/4W) in one module and one Telnet port balance 2 slots empty; unit to support both AC/DC power supply; Cable to be provided for one no for E&M interface; DC to AC adapter- 1 Nos; Make Fabio 4C/ 4E1/ DC Team Engineer, Mapple 4C with 4E1s equivalent or superior. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after supply. | Numbers | 2.00 | 64,201 | 1,28,402 |
| 52 | Installation of integrated Access Multiplexer 4U height/19" Rack mountable with 4 DTE (1+1) protection E1 interfaces & V.21/V.23 Modules supporting 8 Interface of (2W/4W) in one module and one Telnet port balance 2 slots empty; unit to support both AC/DC power supply; Cable to be provided for one no for E&M interface; DC to AC adapter- 1 N o s ; Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after execution. | Lumpsum | 2.00 | 10,889.52 | 21,779.04 |
| 53 | Supply of Single Mode Single Fiber Optical Media Driver 20KM 10/100/1000(Giga) RJ-45 with inbuilt power supply 230VAC/-48VDC. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after Supply. | Numbers | 6.00 | 5,353.67 | 32,122.02 |
| 54 | Supply of Electronic LC gate telephone system in 1+6 configuration with inbuilt voice recorder. It includes supply of 'surge protection and line connection unit/circuit and centralised power supply system with battery as per RDSO Spec no. RDSO/SPN/TC/51/2021 Rev 1 or latest. Inspection: (i) RDSO/RITES if value of item in work more than 10 lakhs or as per extant policy (ii) Consignee if value of whole item in work less than 10 lakhs or as per extant policy Inspection Charges: (i)Borne by Railways Payment Terms: 100% after Supply | Set | 1.00 | 78,833.55 | 78,833.55 |
| 55 | Supply of 8 port Gigabit Managed PoE+ Layer 2 Switch supporting 8 nos 10/100/1000 BASE-T ports, along with 2 Nos of Gigabit SFP ports with SFPs, as per RDSO Specifications RDSO/SPN/TC/83/2020 Rev. 2.1 or latest, Make: CISCO/JUNIPER equivalent or superior. Inspection: RDSO/RITES Inspection Charges: Borne by Railways Payment Terms: 100% after Supply. | Numbers | 2.00 | 32,785.27 | 65,570.54 |
| 56 | Supply of Double side Digital Clock suitable for platform area with GPS Synchronization in standalone mode as per Clause 5 of RDSO SPN TC 62/2008, (Rev 4.1) or latest with all required accessories. Inspection: (i) RDSO/RITES if value of item in work more than 10 lakhs or as per extant policy (ii) Consignee if value of whole item in work less than 10 lakhs or as per extant policy Inspection Charges: (i)Borne by Railways (ii) None Payment Terms: 100% after Supply | Numbers | 4.00 | 66,947.13 | 2,67,788.52 |
| 57 | Installation & commissioning of Double side Digital Clock suitable for platform area with GPS Synchronization in standalone mode as per instruction of site incharge with all required accessories and fixing arrangements to commissioning the item. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after commissioning. | Numbers | 4.00 | 7,441.81 | 29,767.24 |
| 58 | Supply of Digital Clock suitable for Office Complex with GPS Synchronization in standalone mode as per Clause 6 of RDSO SPN TC 62/2008, (Rev 4.1) or latest Inspection: (i) RDSO/RITES if value of item in work more than 10 lakhs or as per extant policy (ii) Consignee if value of whole item in work less than 10 lakhs or as per extant policy Inspection Charges: (i)Borne by Railways (ii) None Payment Terms: 100% after Supply | Numbers | 6.00 | 15,894.76 | 95,368.56 |
| 59 | Supply of Sine Wave output Voltage inverter of 2.0KVA capacity with minimum 180 Minutes backup at full load with battery set and trolley stand. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after supply. | Numbers | 2.00 | 38,211.43 | 76,422.86 |
| 60 | Supply of Double-Faced Coach Guidance Display Boards as per RDSO/SPN/TC/108/2019 Ver 1.0 or latest with latest amendments. Inspection: (i)RDSO/RITES: if value of item in work more than 10 lakhs (ii)Consignee: if value of whole item in work less than 10 lakhs as per extant policy Inspection charges: (i) Borne by Railways (ii) None Payment Terms:100% after supply. | Numbers | 24.00 | 27,072.99 | 6,49,751.76 |
| 61 | Installation & commissioning of Double- Faced Coach Guidance Display Boards in shade area. This includes all required accessories required including hanging structure for fixing arrangements to commissioning the item as per instructions of site incharge. Inspection: Consignee Charges: None Payment terms: 100% after commissioning | Numbers | 4.00 | 3,609.73 | 14,438.92 |
| 62 | Installation & commissioning of Double- Faced Coach Guidance Display Boards in open area This includes all required accessories including hanging structure, pole and fixing arrangements for commissioning the item. Rain hood/sun guard should be provided in open area for display boards as per instructions of site incharge. Inspection: Consignee Charges: None Payment terms: 100% after commissioning | Numbers | 20.00 | 7,219.46 | 1,44,389.2 |
| 63 | Supply of Single line double faced Train Arrival/Departure Display Boards as per RDSO/SPN/TC/108/2019 Ver 1.0 or latest with latest amendments. Inspection: (i)RDSO/RITES: if value of item in work more than 10 lakhs (ii)Consignee: if value of whole item in work less than 10 lakhs as per extant policy Inspection charges: (i) Borne by Railways (ii) None Payment Terms:100% after supply. | Numbers | 2.00 | 1,40,438.21 | 2,80,876.42 |
| 64 | Installation & commissioning of Single line double faced Train Arrival/Departure Display board. This includes all required accessories required including hanging structure for fixing arrangements to commissioning the item as per instructions of site incharge. Inspection: Consignee Charges: None Payment terms: 100% after commissioning | Numbers | 2.00 | 10,835.76 | 21,671.52 |
| 65 | Supply of Platform Data Controller as per RDSO/SPN/TC/108/2019 Ver 1.0 or latest with latest amendments. Inspection: (i)RDSO/RITES: if value of item in work more than 10 lakhs (ii)Consignee: if value of whole item in work less than 10 lakhs as per extant policy Inspection charges: (i) Borne by Railways (ii) None Payment Terms:100% after supply. | Numbers | 2.00 | 29,061.43 | 58,122.86 |
| 66 | Installation & commissioning of Platform Data Controller as per RDSO/SPN/TC/108/2019 Ver 1.0 or latest with latest amendments as per instructions of site incharge. Inspection: Consignee Charges: None Payment terms: 100% after commissioning | Numbers | 2.00 | 2,199.25 | 4,398.5 |
| 67 | Supply, installation, testing and commissioning of Remote Monitoring System (RMS) Server as per RDSO Specification No. RDSO/SPN/TC/108 /2019, Ver 1.0 or latest as per instruction of site in charge with all required accessories and fixing arrangements to commissioning the item. Inspection: (i)RDSO/RITES: if value of item in work more than 10 lakhs (ii)Consignee: if value of whole item in work less than 10 lakhs as per extant policy Inspection charges: (i) Borne by Railways (ii) None Payment Terms:100% after supply. | Numbers | 1.00 | 1,71,254 | 1,71,254 |
| 68 | Supply of single line double faced Platform Display boards for displaying information of single train & all accessories as per RDSO Spec No: RDSO/SPN/TC/108/2019, Ver 1.0 or latest. Inspection: (i)RDSO/RITES: if value of item in work more than 10 lakhs (ii)Consignee: if value of whole item in work less than 10 lakhs as per extant policy Inspection charges: (i) Borne by Railways (ii) None Payment Terms:100% after supply. | Numbers | 1.00 | 1,90,900 | 1,90,900 |
| 69 | Installation, testing and commissioning of single line double faced Platform Display boards for displaying information of single train as per RDSO Spec No: RDSO/SPN/TC/108/2019, Ver 1.0 or latest. This also includes supply of all other materials required for installation such as clamp, hanger, angles etc.as per instructions of site incharge. Inspection: Consignee Charges: None Payment terms: 100% after commissioning | Numbers | 1.00 | 12,616 | 12,616 |
| 70 | Complete wiring, testing, integration and commissioning of IPIS system as per scope of work. This shall include all connecting cables, connectors etc. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after commissioning. | Lumpsum | 1.00 | 6,514.52 | 6,514.52 |
| 71 | Supply installation and commissioning of versatile PA horn speaker 30W with 100V LMT Taps 15, 10 and 5W complete with fixture of make Philips/Ahuja. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after commissioning. | Numbers | 13.00 | 1,681.89 | 21,864.57 |
| 72 | Supply and installation of column speaker 15W with LMT all metal weather resistant, including fixtures and other material required. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after execution. | Numbers | 21.00 | 2,023.14 | 42,485.94 |
| 73 | Supply and installation of wall speaker with volume control model WS-664T or similar. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after execution. | Numbers | 14.00 | 1,944.12 | 27,217.68 |
| 74 | Supply & installation of Amplifier AHUJA TZA-4000EM or similar. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after execution. | Numbers | 1.00 | 21,430.8 | 21,430.8 |
| 75 | Supply of Mike AHUJA ACM-66CH or superior make. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after supply. | Numbers | 3.00 | 1,978.78 | 5,936.34 |
| Schedule total | ₹66,54,995.09 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCC-2022-ACS10corrected.pdf
ATTACHMENT
ACSNo.1GCC-2022.pdf
ATTACHMENT
Correction slip No 2
ATTACHMENT
ACS-2toGCC-2022_2022-CE-1-CT-GCC-2022-POLICY_13.12.2022.pdf
ATTACHMENT
AdvanceCorrectionSlipNo_3ACS-311.pdf
ATTACHMENT
AdvanceCorrectionSlipNo_4ACS-4.pdf
ATTACHMENT
AdvanceCorrectionSlipNo_5GCCApril-2022.pdf
ATTACHMENT
AdvanceCorrectionSlipNo_6ACS-61.pdf
ATTACHMENT
AdvanceCorrectionSlipNo_7ACS-7.pdf
ATTACHMENT
AdvanceCorrectionSlipNo_8ACS-8.pdf
ATTACHMENT
AdvanceCorrectionSlipNo_9ACS-9.pdf
ATTACHMENT
AdvanceCorrectionSlipNo_10ACS-10.pdf
ATTACHMENT
GCC2022correctionslipNo.11.pdf
ATTACHMENT
TelecomCircularNo.09.pdf
ATTACHMENT
JPOforCableCut.pdf
ATTACHMENT
NIT26082026.pdf
ATTACHMENT
05R.R.TD-26-27DY.CSTEGSUJPDKBJTelecomwork19626_1.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].