Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.7 LAccepted-AOC KOHLI NO 17509 GALI KHADDAR BHANDAR WALI BHI WALA ROAD BATHINDA PB 151001 | BATHINDA | BATHINDA | PUNJAB | 151001 | ₹32.7 L | L1 | Accepted-AOC BEING LOWEST BIDDER |
| 2 | L2₹38.3 L+₹5.6 L (17.0%)Rejected-AOC C O SHRI AMRENDER KUMAR YADAV IACHHIPUR SANTOSH NAGAR GORAKHNATH GORAKHPUR UTTAR PRADESH PIN 273015 | GORAKHPUR | UTTAR PRADESH | 273015 | ₹38.3 L+₹5.6 L (17.0%) | L2 | Rejected-AOC OTHER THAN LOWEST BIDDER |
| 3 | L3₹38.9 L+₹6.2 L (19.1%)Rejected-AOC | ₹38.9 L+₹6.2 L (19.1%) | L3 | Rejected-AOC OTHER THAN LOWEST BIDDER |
| 4 | L4₹39.1 L+₹6.4 L (19.6%)Rejected-AOC | ₹39.1 L+₹6.4 L (19.6%) | L4 | Rejected-AOC OTHER THAN LOWEST BIDDER |
| 5 | Rejected-Technical PLOT NO 7 KUMAWATI BASTI RAISINGHNAGAR SRI GANGA NAGAR RAJASTHAN 335051 | RAISINGHNAGAR | SRI GANGA NAGAR | RAJASTHAN | 335051 | - | - | Rejected-Technical Rejected due to residual value of work more than five times of present tendering limit |
| Sl No | Description | Qty | Unit | M/s BHUPINDRA ENGINEERING WORKS L1 | PACHAR BROTHERS L3 | BISHNOI BUILDERS L4 | SHIVA BUILDERS L2 |
|---|---|---|---|---|---|---|---|
| .10Notes:- (i) 100 percent nonperishable items of the work shall be deposited by the L1 bidder within 30 days after placing of work order. (ii) The critical path network shall be submitted by L1 bidder immediately after the acceptance of tender and approved by GE. (iii) The bidders must ensure to visit the site, check relevant documents and makes of materials required to be incorporated under the subject from concern Engineer-in-Charge. (iv) The unserviceable material obtained under the schedule of credit shall be handed over to the contractor by the Engineer-in-Charge on a proper gate pass. (v) In case of non-availability of any make mentioned under list of Makes, the L1 Bidder shall obtain non-availability / non-manufacturing certificate from the concern OEM / authorised dealers and submitted to Accepting Officer, the L1 bidder may be incorporated Group-I category makes as approved by HQ CE SWC Jaipur and HQ CE BTZ in the works after prior approval of Accepting Officer. (vi) L1 Bidder shall produce E-way bill alongwith test certificate from OEM / manufacturer for costly items / major items of amount above Rs 50,000/- along with RAR’s and Final Bill. (vii) L1 Bidder shall be maintained an album containing Photos of all the material brought at site and each stage wise work progress and kept at site. Same shall be deposited in Engineer-in-Charge office after completion of work. (viii) The cost of all the above provisions shall be deemed to be included in the quoted rate of bidder, nothing extra shall be paid to the bidder.viii) The cost of all the above provisions shall be deemed to be included in the quoted rate of bidder, nothing extra shall be paid to the bidder. (ix) If a bidder observes any item in the BOQ that appears to be "Freakishly Low" or technically not required for execution at the site, the bidder must submit written comments to the Accepting Officer during the pre-tender stage or at least 07 days before the Bid Submission Start Date. (x) Any act by the contractor that is found to be against the interest of the Department,or commits misconduct or any complaint received through proper channels and supported by verifiable proof (e.g., fraudulent vouchers, negligence in execution, or attempt to cause undue benefit), shall be treated as a willful default.Such defaults shall render the contractor liable for an Adverse Remark ("NO") in the Quarterly Work Load Return (WLR), barring the firm and its related/sister concerns from participating in further tenders. | |||||||
| 1.00 | S&F Non skid ceramic tiles 7 to 8 mm thick (square/rectangular) (coloured tiles) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floors set and jointed with single component adhesive and pointed in coloured cement grout to match the coloured tiles 15mm thick screed bed or bedding layer CM 1:4 for laying finishes,complete after dismantling floor tiling including cement mortar bedding and rubbish off the premises all as specified as directed by Engr-in- Charge
MAKE :- JOHNSON/SOMANY/KAJARIA or equivalent in make mentioned in Appendix 'A'or techno commercial as mentioned in List of Makes as approved by GE. | 150 | Sqm | 770 ₹1,15,500 Lowest | 800 ₹1,20,000 | 977 ₹1,46,550 | 1,125 ₹1,68,750 |
| 2.00 | S&F Glazed ceramic coloured tiles with highlighter in vertical surface 300x600x7-8mm thick set and jointed with single component adhesive and pointed in white or colour cement grout to match including 10 mm thick rendering in CM 1:4 on other than fair face of brick work including dismantling floor tiling including cement mortar bedding and rubbish off the premises all as specified as directed by Engr-in- Charge. MAKE :- JOHNSON/SOMANY/KAJARIA or equivalent in make mentioned in Appendix 'A'or techno commercial as mentioned in List of Makes as approved by GE. | 320 | Sqm | 780 ₹2,49,600 Lowest | 900 ₹2,88,000 | 1,077 ₹3,44,640 | 1,125 ₹3,60,000 |
| 3.00 | M&L for 8-9mm thick vitrified ceramic light shade, double charge, ultra charged (as approved) coloured tiles (square / rectangular), polished, area of each tile not exceeding 0.36 sqm in floors etc Sqm with single component adhesive and pointed in coloured cement grout to match the coloured tiles 15mm thick screed bed or bedding layer CM 1:4 for laying finishes,complete after dismantling floor tiling including cement mortar bedding and rubbish off the premises all as specified as directed by Engr-in- Charge
MAKE :- JOHNSON/SOMANY/KAJARIA or equivalent in make mentioned in Appendix 'A'or techno commercial as mentioned in List of Makes as approved by GE. | 80 | Sqm | 900 ₹72,000 Lowest | 1,300 ₹1,04,000 | 1,467 ₹1,17,360 | 1,425 ₹1,14,000 |
| 4.00 | All as per item No 03 above but as in vertical surfaces such as skirting, dados & risers to steps etc over 10 mm thick backing plaster in CM 1:4 including dismantling floor tiling including cement mortar bedding and rubbish off the premises all as specified as directed by Engr-in- Charge.
MAKE :- JOHNSON/SOMANY/KAJARIA or equivalent in make mentioned in Appendix 'A'or techno commercial as mentioned in List of Makes as approved by GE. | 6 | Sqm | 900 ₹5,400 Lowest | 1,400 ₹8,400 | 1,200 ₹7,200 | 1,425 ₹8,550 |
| 5.00 | M&L old size brickwork with fly ash bricks straight or curved on plan exc 6m mean radius wall built in cement mortar 1:6 including prior demolition of brick work ,built in cement mortar including all quoins, arches, pillars etc,and making good. | 35 | Cum | 4,000 ₹1,40,000 Lowest | 4,500 ₹1,57,500 | 5,000 ₹1,75,000 | 4,025 ₹1,40,875 |
| 6.00 | All as per item No 5 above but except bricks | 9.5 | Cum | 3,000 ₹28,500 | 2,000 ₹19,000 Lowest | 2,700 ₹25,650 | 2,125 ₹20,187.5 |
| 7.00 | Taking down existing frames exc 1.5 sqm but n.exc 4 sqm and Supplying and Fixing pressed steel frames of size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., and PCC 1:3:6 type C0 using (12.5mm graded aggregate) as in back filling of pressed steel frames, bed blocks, coping, fixing of hold fasts etc including necessary formwork including applying one coat of synthetic enamel paint (ordinary tint) on steel surfaces over 10cm width or girth complete all as specified and directed by Engineer - in - Charge. | 49 | RM | 400 ₹19,600 | 250 ₹12,250 Lowest | 327 ₹16,023 | 350 ₹17,150 |
| 8.00 | S&F Pressed steel frames of size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.,PCC 1:3:6 type C0 using (12.5mm graded aggregate) as in back filling of pressed steel frames, bed blocks, coping, fixing of hold fasts etc including necessary formwork including then applying one coat of synthetic enamel paint (ordinary tint) on steel surfaces over 10cm width or girth complete all as specified and directed by Engineer - in - Charge. | 49 | RM | 370 ₹18,130 | 400 ₹19,600 | 350 ₹17,150 Lowest | 360 ₹17,640 |
| 9.00 | S& F for 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, including decorative laminate 0.9 mm thick type 1 of surface finish, colour and pattern as approved , fixed with approved adhesive on both sides,including supply and fixing of following items :-
(a) Stainless steel (304 Grade) finished butt Hinges 100 mm, 4 Nos per leaf and table 6 of BIS 12817-2020 BIS Marked.
(b) Stainless steel (304 Grade) finished square tower bolt 200 mm long-2 Nos per leaf as per table 01 dia of bolt 12 mm as per BIS 12833.
(c) Stainless steel (304 Grade) Finished Handles 200 mm-2 Nos per leaf.
(d) Stainless steel (304 Grade) finished sliding bold 300 mm-1 No per leaf, 16 mm dia as per BIS clause (iii) of BIS 15834-2020.
(e) Stainless steel (304 Grade) Finished Floor door stopper-1 140mm Nos per leaf.
(f) Stainless steel (304 Grade) wire cloth fixing as per manufacturer's instructions
Make :-Alstone/Century/Floresta or equivalent in make mentioned in Appendix 'A'or techno commercial as mentioned in List of Makes as approved by GE. | 56.53 | Sqm | 380 ₹21,481.4 Lowest | 2,700 ₹1,52,631 | 3,100 ₹1,75,243 | 2,510 ₹1,41,890.3 |
Tender Value
₹40.0 L
EMD Value
₹79,980
Closing Date
1 Jul 2026, 6:00 pmClosed
GE (A) SURATGARH
GE (A) SURATGARH MIL STATION
COMPREHENSIVE MAINTENANCE AND CERTAIN B/R AND E/M REPAIR WORK AT SASF BIRDHWAL AND 815 CETC AND OTHER BUILDING IN THE AOR OF AGE B/R-I UNDER GE (A) SURATGARH
2026_MES_771193_1
GE(A)/SOG-TOKEN-16/2026-27
Open Tender
Civil Works
Item Rate
120 days
IN THE AOR OF GE (A) SURATGARH
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE(A) SURATGARH
₹79,980
Yes
26 Aug 2026
10 Jun 2026
3 Jul 2026
10 Jun 2026
1 Jul 2026
24 Jun 2026
10 Jun 2026 - 24 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | S&F Non skid ceramic tiles 7 to 8 mm thick (square/rectangular) (coloured tiles) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floors set and jointed with single component adhesive and pointed in coloured cement grout to match the coloured tiles 15mm thick screed bed or bedding layer CM 1:4 for laying finishes,complete after dismantling floor tiling including cement mortar bedding and rubbish off the premises all as specified as directed by Engr-in- Charge
MAKE :- JOHNSON/SOMANY/KAJARIA or equivalent in make mentioned in Appendix 'A'or techno commercial as mentioned in List of Makes as approved by GE. | 150 | Sqm | - | - |
| 2 | S&F Glazed ceramic coloured tiles with highlighter in vertical surface 300x600x7-8mm thick set and jointed with single component adhesive and pointed in white or colour cement grout to match including 10 mm thick rendering in CM 1:4 on other than fair face of brick work including dismantling floor tiling including cement mortar bedding and rubbish off the premises all as specified as directed by Engr-in- Charge. MAKE :- JOHNSON/SOMANY/KAJARIA or equivalent in make mentioned in Appendix 'A'or techno commercial as mentioned in List of Makes as approved by GE. | 320 | Sqm | - | - |
| 3 | M&L for 8-9mm thick vitrified ceramic light shade, double charge, ultra charged (as approved) coloured tiles (square / rectangular), polished, area of each tile not exceeding 0.36 sqm in floors etc Sqm with single component adhesive and pointed in coloured cement grout to match the coloured tiles 15mm thick screed bed or bedding layer CM 1:4 for laying finishes,complete after dismantling floor tiling including cement mortar bedding and rubbish off the premises all as specified as directed by Engr-in- Charge
MAKE :- JOHNSON/SOMANY/KAJARIA or equivalent in make mentioned in Appendix 'A'or techno commercial as mentioned in List of Makes as approved by GE. | 80 | Sqm | - | - |
| 4 | All as per item No 03 above but as in vertical surfaces such as skirting, dados & risers to steps etc over 10 mm thick backing plaster in CM 1:4 including dismantling floor tiling including cement mortar bedding and rubbish off the premises all as specified as directed by Engr-in- Charge.
MAKE :- JOHNSON/SOMANY/KAJARIA or equivalent in make mentioned in Appendix 'A'or techno commercial as mentioned in List of Makes as approved by GE. | 6 | Sqm | - | - |
| 5 | M&L old size brickwork with fly ash bricks straight or curved on plan exc 6m mean radius wall built in cement mortar 1:6 including prior demolition of brick work ,built in cement mortar including all quoins, arches, pillars etc,and making good. | 35 | Cum | - | - |
| 6 | All as per item No 5 above but except bricks | 9.5 | Cum | - | - |
| 7 | Taking down existing frames exc 1.5 sqm but n.exc 4 sqm and Supplying and Fixing pressed steel frames of size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., and PCC 1:3:6 type C0 using (12.5mm graded aggregate) as in back filling of pressed steel frames, bed blocks, coping, fixing of hold fasts etc including necessary formwork including applying one coat of synthetic enamel paint (ordinary tint) on steel surfaces over 10cm width or girth complete all as specified and directed by Engineer - in - Charge. | 49 | RM | - | - |
| 8 | S&F Pressed steel frames of size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.,PCC 1:3:6 type C0 using (12.5mm graded aggregate) as in back filling of pressed steel frames, bed blocks, coping, fixing of hold fasts etc including necessary formwork including then applying one coat of synthetic enamel paint (ordinary tint) on steel surfaces over 10cm width or girth complete all as specified and directed by Engineer - in - Charge. | 49 | RM | - | - |
| 9 | S& F for 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, including decorative laminate 0.9 mm thick type 1 of surface finish, colour and pattern as approved , fixed with approved adhesive on both sides,including supply and fixing of following items :-
(a) Stainless steel (304 Grade) finished butt Hinges 100 mm, 4 Nos per leaf and table 6 of BIS 12817-2020 BIS Marked.
(b) Stainless steel (304 Grade) finished square tower bolt 200 mm long-2 Nos per leaf as per table 01 dia of bolt 12 mm as per BIS 12833.
(c) Stainless steel (304 Grade) Finished Handles 200 mm-2 Nos per leaf.
(d) Stainless steel (304 Grade) finished sliding bold 300 mm-1 No per leaf, 16 mm dia as per BIS clause (iii) of BIS 15834-2020.
(e) Stainless steel (304 Grade) Finished Floor door stopper-1 140mm Nos per leaf.
(f) Stainless steel (304 Grade) wire cloth fixing as per manufacturer's instructions
Make :-Alstone/Century/Floresta or equivalent in make mentioned in Appendix 'A'or techno commercial as mentioned in List of Makes as approved by GE. | 56.53 | Sqm | - | - |
| 10 | S&F 35 mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); fitted to chowkats including applying two coat of synthetic enamel paint over a coat of pink primer and necessaryincluding supply and fixing of following items :-
(a) Stainless steel (304 Grade) finished butt Hinges 100 mm, 4 Nos per leaf and table 6 of BIS 12817-2020 BIS Marked.
(b) Stainless steel (304 Grade) finished square tower bold 200 mm long-2 Nos per leaf as per table 01 dia of bolt 12 mm as per BIS 12833.
(c) Stainless steel (304 Grade) Finished Handles 200 mm-2 Nos per leaf.
(d) Stainless steel (304 Grade) finished sliding bold 300 mm-1 No per leaf, 16 mm dia as per BIS clause (iii) of BIS 15834-2020.
(e) Stainless steel (304 Grade) Finished Floor door stopper-1 140mm Nos per leaf.
(f) Stainless steel (304 Grade) wire cloth fixing as per manufacturer's instructions | 55.04 | Sqm | - | - |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.48 MB
T16.pdf
Tender Documents • 1.45 MB
BOQ_863620.xls
BOQ • 0.39 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .