CERTAIN REPAIRS/ MAINTENANCE OF ROADS INCLUDING POTHOLES AND ROAD FURNITURE ETC AT TRANSIT CAMPUNDER GE NAGROTA

Amount

Repair to pot holes any depth not exc 5 Sqm each including sweeping free from dust and mud or water scoring sunken surfaces in roads, path etc including cutting around edges to atleast 25mm in depth and making good by applying tack coat@ 5kg per 10 sqm, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sqm, blinded with 0.9 cum of stone chippings, 6.3mm size and again well rammed (including supply of premixed macadam, binder and chippings). depth of potholes exc 30mm complete all as specified and directed.

Preaparing black top surface by brushing with wire brush for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all dirt, dust etc complete all as specified.

Applying evenly a priming / tack coat with bituminous primer @ 5Kg per 10 Sqm using paving bitumen VG-10 on black top surface complete.

Bituminous premix semi dense asphalitc concrete 30mm consolidated thickness with 5.5% binder content by weight of total mix paving bitumen VG-30 laid with mechnical pavar rolled and compacted to reqd camber and gradient with power roller 8 to 10 ton capacity complete all as specified and directed .

M&L for scarifying or picking gravelled, macadam or bituminous macadam sufaces in area exc 400 sqm Exc 50mm deep and not exc 100mm deep

M&L for premixed bituminous macadam with 4% of binder content by weight of total mix using paving bitumen laid with self propelling mechanical paver rolled and compacted to required gradient and camber (consolidated thickness 50 mm or less) to make good the cut edges of roads etc complete all as specified and directed by Engr-in-Charge.

Hot thermo plastic imported road marking material strips confirming to British Specification 3762 with 20% glass beads having reflective index of 1.5 mm 75 % spterical with indigenous or for foundation plan having sufficient strength to withstand heavy load without deformation and having softening point 25 to 30 of area in width of n. exc. 15 cm & 2.5 mm thick strip in white colour according to IRC35-1970, complete all as specified and directed by Engr-in-Charge . Note:- Thermo plastic road marking paint shall be of Make : ASIAN/ STP Ltd.

S&F in repairs of cats eye (road stud) made out of ABS plastic body heavy duty with two sides fixed with high intensity grade retro reflective sheeting in Red/Yellow colour including fixing with suitable adhesive complete all as directed by Engineer-in-Charge.

Supply and fixing metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed

Supply and fixing solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufacturers instructions etc. complete all as specified and directed.

S&F in repairs for road safety Convex mirror 60cm Dia polycarbonate Covex Mirror with 130 Degree + actual viewing angle, equipped with adjusting swivel and mounting for infinite adjustments compete all as per specification and directed by Engineer-in-Charge.

M/S CHOUDHARY BUILDERS (BID ID -3355229)