Operationalization commissioning of OBC Girls Hostel at Government Degree College Chrar-i-sharief

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand).

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):First class KD Wood

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge First class KD 30mm thick

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws First class KD wood 30mm thick

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, including panelling all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). first class KD wood 35mm thick

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).

Providing and Fixing of hardware fittings for doors and windows of approved brand and manufacture complete job as per directions of EIC

T.Bolts 100 mm

T.Bolts 150 mm

Handles 125 mm

Handles 150 mm

L-Drops(Link) 200 mm

15mm Cement plaster on the rough side of single or half brick wall of mix:1 : 4 ( 1 cement : 4 fine sand)

12mm Cement plaster of mix 1 : 6 ( 1 cement : 6 fine sand)

6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand)

Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete 2 mm thick

Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm)

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) including Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ liter of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two Coats

Providing and fixing of KHATAM BANDI ceiling of first class budloo/fir wood including the cost of frame work.Paanch Murabah

French spirit polishing, Two or more coats on new works including a coat of wood filler

Providing and fixing 12 mm thick imported wodden panelling (KD wood or equavalent) with skirting chair rails, and cornice with necessary nails/screws, priming coat on unexposed surface etc.,incl 12mm thick ply to ply board on apprrioate frame work incl two or more cost of french sprit polish to give glassy finish to the best satisfication of EIC.,complete job.

Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levelsGranite of any colour or shade (Area of slab upto 0.5 sqm) 16mm

Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.Granite Work

Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately) Size of tile 600x600 mm

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete50 mm thick with 20mm nominal size stone aggregate.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete Welded

Providing and fixing high rib color coated roofing sheets including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required 0.50 mm (+0.05 %) including ridges and valleys complete job.

Providing and fixing plained eaves boarding 2nd class kail wood 250x32 mm (nominal size)

Providing and fixing 20mm thick wooden planks ceiling (frame work for base to be paid for separately) with M.S. screws 1st class KD WOOD

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)

Providing and fixing 12 mm thick imported wodden panelling ( KD wood or equavalent) with skirting chair rails, and cornice with necessary nails/screws, priming coat on unexposed surface etc.,incl 12mm thick ply to ply board on frame work of 2.5 inch *4.5 inch thick of KD wood battons placed at approraite distance of 2.5 feet incl two or more cost of d french polish to give glory finish to the best satisfication of EIC.,complete job.

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position KD wood (1st class)

Providing and fixing of almirah/wardrobe 24'' deep using block board 18 mm thick as per requirements of intending department (viz shelves, cabinets, etc) including shutter using 18 mm thick ply to ply board. The face shall be finished with sunmica of approved texture and finish including priming and one of more coats of standard paint, all hardware items(magnetic cather, lock, handle, tower bolt,hinges, etc) as directed by EIC complete job.

Providing and fixing factory made Kitchen Cabinet Shutter/Partition 20mm nominal thickness of approved shade, quality and make, made from rigid foam sheets (Single extruded) having density 600 Kg/cum and laminated on both side by laminate Sheet/PVC foil lamination. The exposed edges shall be sealed with PVC edge beading of same shade and colour. The shutter shall be fire retardent having necessary screw holding capacity. Shutter shall be fixed to frame using approved hinges with necessary stainless steel screws, all complete as per direction of Engineer-in-charge.

Providing and fixing 3.5 mm thick float glass in fixed panes with budloo wood beadings of reqd width fixed with nails complete ( glass panes to be measured in fitted and finished form)

Engagement of jcb and tipper for clearance of site premesis and disposal of same.complete job as directed by EIC

TIPPER

Engagement of labour for dismantling of shed and removing unwanted materials from building like rusted iron, settled cement bags etc.

PLUMBING

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm P.V.C or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid.

Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required :White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps.

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing , installation, commissioming and testing Hot water Geyzer of approved make including fixing with bolts/ fastners of approved brand as per EIC 50 litre capacity(racold, venus , jaguar or equalivant )

Providing & Fixing C.P. Brass Wall Mixer of approved make ,as per EIC including cutting and making good the walls wherever required. (hindware , jaguar or equava;ent )

Providing & Fixing first quality white vitreous china Ceramic under counter wash basin size 550 x 400 mm with C.P. brass waste and coupling, chain and rubber plug, P.V.C Flexible waste pipe complete including cutting and making good the walls wherever required.

Providing & Fixing C.P. brass Single hole Mixer of approved make for wash basin of approved make including cutting and making good the walls wherever required. (hindware , jaguar or equavalent )

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm

Providing & fixing SS coat hooks strip (plate type 6 hook 300-400mm length) fixed with PVC rawal plug and C.P brass screws including cutting and making good the walls wherever required.

Providing and fixing of Soap Dispenser (hindware , jaguar or equava;ent ) of approved make including screws complete

Providing and fixing Unbreakable transparent corner shelves set of 3(9 inch,10 inch,1inch)

Providing and fixing toilet paper holder C.P. brass

Providing and fixing C.P. brass Soap Dish/ tray of approved make including screws complete

Providing & Fixing C.P. brass tape long body with health faucet of approved make including cutting and making good the walls wherever required. (hindware , jaguar or equavalent )

Providing & Fixing 600x20 mm C.P brass towel rail of approved make with C.P brackets fixed to wooden cleats with C.P brass screws etc. including cutting and making good the walls wherever required .(hindware , jaguar or equavalent)

Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931

Providing and fixing 15 mm nomonal bore C.P brass angle value for basin mixer and geyser of approved make confirming to IS: 8931(hindware , jaguar or eqavalent)

Providing and fixing C.P / Stainless steel anti cockroach trap (grating) on floor traps and floor drains with cement mortar, complete in all respects.100mm dia

Providing and fixing C.P. brass 32 mm size bottle trap of approved quality and make and as per the directions of engineer in charge.

Providing and fixing uplasticised PVC connection pipe with brass unions :45 cm length 15 mm nominal bore

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge.

20mm nominal outer dia pipes.

25mm nominal outer dia pipes.

40mm nominal outer dia pipes

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 25 mm nominal bore

Centrifugal monoset self priming pump 1.5 KW/2Hp of approved make (Crompton or eualavalent

Pressure pump with danfoss switch kirloskar Brothers 1 HP ( JALRAAJ-I-ULTRA) 1 HP

Providing & laying GI pipes (Medium) class B of approved make, conforming to IS : 1239-1982 complete with GI fittings excluding trenching and refilling etc (external work)

25 mm nominal bore

15 mm nominal bore

Anti Microbial 1000 liter triple layer virgin plastic ( ISI MARK)

DRAINAGE

Providing, Fixing,Testing & Commissioning uPVC SWR pipes (Type B) for soil,waste and vent conforming ti IS 13592 along with all required fittings like tees,bends,cowls,crosses with or without access doors jointed with approved solvent cement fixed to walls and ceilings including angle supports with clamps complete including cutting holes in RCC/brick work (slab/beam/wall) and making good the floors,beams and walls with cement mortar where required complete of outer diameter.(soil/waste pipe)(Prince ISI MARK)

110 mm Dia

150 mm Dia

75 mm Dia

50 mm Dia

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarsesand (zone- III) : 8 graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with a floatingcoat of neat cement complete as per standard design :Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : 20.7.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:Hard Rock (Blasting prohibited )

Providing and fixing of CI Man hole cover with frame of size 450mmx450mm of approved quality and make complete.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Carriage of materials from source to site of work including loading unloading complete.

Stone Aggregates from nearest source for an average lead of 30 Km

Sand from nearest source for an average lead of 25 Km

Bricks for an average lead for an average lead of 25 Km

Septic Tank and Soakage pit

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil :

Providing and laying of stone soling in trenches hand packed all inclusive leads, lifts, loading, unloading, head load, ramming/ dressing and carriage of materials from approved nearest sources to site of work . Complete job.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.

Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns etc for mass concrete

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)

12mm Cement plaster finished with a floating coat of neat cement of mix:: 1 : 4 ( 1 cement : 4 fine sand)

Dry random rubble masonry with hard stone in foundation and plinth: 7.3.1 With bond stone.Quarry stones

Cement concrete flooring 1:2:4 ( 1 cement: 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size Crushed stone aggregate.

Carriage of materials from source to site of work including loading unloading complete.

Stone Aggregates from nearest source for an average lead of 30 Km

Sand from nearest source for an average lead of 25 Km

Bricks for an average lead for an average lead of 25 Km

Stones for an average lead of 25 km