GE(S) BTD TOKEN NO 23 OF 2022-23 REPAIR REPLACEMENT OF INTERNAL UNSERVICEABLE POINT REWIRING FITTING FIXTURE DBS SUB MAIN WIRING SWITCHES AND CONNECTED ACESSORIES WORK IN JADUNATH ENCLAVE AND ABDUL HAMID ENCLAVE UNDER AGE EM IV UNDER GE(S) AT BATH

Amount

Taking down carefully existing copper point wiring (light,fan, socket or power) complete including fixture and fittings such as switches, bellpushes, ceiling roses, pendents, regulators, sockets, light fitting, callbells etc removing materials to store for keeping in safe custody or for taking credit(credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc. to match existing complete all as specified and directed

M & L for point wiring for one light / fan point controlled by one switch with 1.5 Sqmm (nominal area) PVC insulated, unsheathed multi stranded copper conductor cable FR-LSH in existing conduit, and existing sunken boxes but including 3 mm thick phenolic laminated sheet top cover for sunken boxes flush to surface for one light point/fan point, controlled by one switch and /or fan regulator including PVC insulated unsheathed 1.5 Sqmm copper conductor cable FR-LSH connected to common earth dolly complete all as specified and directed.

All as per srl item No. 2.00 (here-in-before) but socket 3 pin 5 Amp 230 volt flush type on same board complete all as specified and directed.

All as per srl item No. 2.00 (here-in-before) but for one socket point out let 3 pin 5 Amp in independent board complete all as specified and directed.

All as per srl item No. 2.00 (here-in-before) but for call bell point complete all as specified and directed.

All as per srl item No. 2.00 (here-in-before) but for one light point controlled by two way switch complete all as specified and directed.

All as per srl item No. 2.00 (here-in-before) but for 15 Amp socket out let by using 2.5 Sqmm PVC insulated unsheathed copper conductor cable FR-LSH multi strand on independent board including provn of 2.5 Sqmm unsheathed, multi stranded copper conductor cable FR-LSH continues as earth wire connected to earth dolly etc complete all as specified and directed

S&F Switch piano, flush type single pole, one way 5 Amp complete all as specified and directed

S&F Switch piano, flush type single pole, one way 15 Amp complete all as specified and directed

S&F Switch piano, flush type single pole, two way 5 Amp complete all as specified and directed

S&F bell push 5/6 Amps 230 V AC complete all as specified and directed

S&F Socket outlet 3 pin, 5A, flush type complete all as specified and directed

S&F Socket outlet 2 in 1, 3 pin, 5 and 15 Amp flush type complete all as specified and directed

S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. complete all as specified and directed

S&F Ceiling rose, 3 terminal PVC/polycarbonate, suitable for 230 V, AC, 50 Hz supply complete all as specified and directed.

S&F call bell ding dong type AC 230 V complete all as specified and directed

S&F wall mounted extruded Aluminium/polycarbonate LED batten fixture T8(G13 holder) 1.2 m, including one LED retrofit tube 20(±10%) watt, 1.2 m T8 6500K,efficacy not less than 90 lumen/watt, extruded Aluminium / polycarbonate, PC diffusor and inbuilt driver complete complete including making connection complete all as specified and directed.

S&F decorative wall light fixture made of polycarbonate suitable for retrofit 9W LED lamp(base B-22) complete with PC diffusor & including one 9W LED lamp(base B-22), 6500K, not less than 90 lumen/watt efficacy including making connection complete all as specified and directed.

S&F LED street light fitting 35 Watt 230V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrossion resistant complete with IP 65/66 protection, IR sensed based auto ON/OFF function Cat Part No LEDSLHLSLD-09H-35-CWL-R01-IRSEN of Halonix or equivalent make mentioned in List of make including fixing with GI/MS bracket made out of suitable size of light grade tube with suitable length bent to shape with 02 sets of MS clamps made out of minimum 3 mm MS flat iron with suitable bolt and nuts complete with making connection complete all as specified and directed

S&F Lamp holder PVC / polycarbonate type with back plate complete all as specified and directed

S&F in replacement sub main two single core PVC copper conductor unsheathed wire multi stranded 6 sqmm along with earth wire 6.0 sqmm copper conductor single core wire connected by common earth in existing surface/recessed PVC/steel conduit and including acomplete all as specified and directed. (Note :- two lengths of 6.0 sqmm cable and one length of 6.0 sqmm earth cable will be measured as one running length)

S&F in replacement sheet metal encloser double door 8 way SPN 240V ISI marked complete with neutral and earth link and bus bar complete made out of CRCA steel sheet Factory made including blanking plate for unused module complete all as specified and directed

Supply, fixing, testing & commisioning in replacement Sheet metal meter board semi recessed in wall, having dimensions not less than 1.4mx0.8mx0.3m, made out of 1.6 mm thick CRCA sheet steel Single door complete with internal wiring, lugs, powder coated painting, locking arrangements, making 06 Nos compartments for fixing of meters having acrylic cover, cable allay with the following accessories: (i) MCCB FP 63A 25kA-01(Main Incoming) (ii) Indicating lamps with fuses-01 set(R,Y,B) (iii) Busbar 200A-01 set(TPN & Earth) (iv) MCB DP 32A, 10kA-06Nos(Outgoing one for each DU) (v) MCB DP 10A 10kA-01 Nos(Outgoing for staircase) Note:- 1. Meters as provided by E/M store shall be refixed into the meter boxes after installation. 2. Drawing of meter box panel must be approved by Engr-In Charge before placing order.

S&F in replacement single pole and neutral enclosure 240V with a two pin and earth plug and socket complete with one single pole MCB 20Amp complete all as specified and direcetd.

S&F in repair MCB 6-32 Amp 240V SP 10 KA ‘C’ series complete all as specified and directed

S&F in repair MCB 20-32 Amp 240V SPN 10 KA ‘C’ series complete all as specified and directed

S&F in repair MCCB 415V, FP 63A 16kA complete all as specified and directed

M & L for earthing with galvanized steel plate electrode 600 x 600 mm x 6 mm size directly burried in ground vertically to earth pit not less than 2.25 meter deep below normal ground level with top edge of the earth plate not less than 1.5 m below normal ground level surrounded with coal dust and common salt filling in alternative layers of 15 cm thick each connected to and including GI earth wire 4 mm dia by means of nuts, bolts, check nuts & washers etc connecting to earthing test point, main switch board and including 15 mm dia GI pipe light grade for protection of earth lead from earth plate to distribution board and 20 mm dia GI pipe medium grade connected with funnel having wire mess for watering purpose including necessary excavation and earth work, PCC (1:2:4) type B-1 (using stone aggregates) for earthing pit, 10mm thick cast iron cover with angle iron frame all as specified and shown in electrical plate No 3 of SSR Part-I and testing on completion including replacement of old unserviceable.

M&L for painting staircase meter box including removing old paint, cleaning with scrapers of preparation of old painted surface, complete with filler and making smooth surface, priming with red oxide primer and painting with two coat of synthetic enamel paint with approved color complete all as specified and directed

NOTE :- ARMAAN COMPLAINT/DAY TO DAY/DOOR TO DOOR COMPLAINTS (From Item No 31.00 to 54.00):- Complaints regarding repair/replacement to these items to be attended unconditionally. All in cost incurred upon deemed to be included in respective items

S & F in repair Switch piano flush type single pole, 5 Amp ,one way etc complete all as specified and directed.

S & F in repair Switch piano flush type single pole, 5 Amp ,two way etc complete all as specified and directed.

S & F in repair Switch piano flush type single pole, 15 Amp ,one way etc complete all as specified and directed.

S&F in repair Bell push 5/6 Amps 230 V AC complete all as specified and directed.

S&F in repair Socket outlet 3 pin, 5A, flush type complete all as specified and directed.

S&F in repair Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal complete all as specified and directed.

S&F in repair Socket outlet 2 in 1, 3 pin, 5 and 15 Amp flush type complete all as specified and directed.

S&F in repair Stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd complete all as specified and directed.

S&F in repair Call bell AC 230 V single pole complete all as specified and directed.

S&F in repair Lamp holder PVC/polycarbonate type with back plate complete all as specified and directed.

S&F in repair wall mounted extruded Aluminium/polycarbonate LED batten fixture T8(G13 holder) 1.2 m, suitable for T8 retrofit tube complete including making connection complete all as specified and directed.

S&F in repair retrofit LED tubelight 20(±10%) watt, 1.2 m T8 6500K,efficacy not less than 90 lumen/watt, extruded Aluminium/polycarbonate, PC diffusor and inbuilt driver complete all as specified and directed.

S&F in repair round shape 6 watt 220V AC surface mounted with high efficiency PMMA diffusor soft glare free light complete with drivers, holders, LED lamps suitable for roof ceiling inlcluding making connection complete all specified and directed

S&F in repair LED street light fitting 35 Watt 230V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrossion resistant complete with IP 65/66 protection, IR sensed based auto ON/OFF function Cat Part No LEDSLHLSLD-09H-35-CWL-R01-IRSEN of Halonix or equivalent make mentioned in List of make including fixing with GI/MS bracket made out of suitable size of light grade tube with suitable length bent to shape with 02 sets of MS clamps made out of minimum 3 mm MS flat iron with suitable bolt and nuts complete with making connection complete allas specified and directed

S&F in repair decorative wall light fixture made of polycarbonate suitable for retrofit 9W LED lamp(base B-22) complete with PC diffusor & including one 9W LED lamp(base B-22), 6500K, not less than 90 lumen/watt efficacy including making connection complete all as specified and directed.

S&F in repair LED light fitting 9/10W bulkhead luminaires incluing LED light, driver, holder connecting up with three core flexible copper conductor cable of suitable size complete allas specified and directed

Fixing only and connecting electric meters complete all as specified and directed Note: Meters will be provided by the E/M store free for fixing only.

S&F in repair rigid non-metallic PVC conduit external dia 20mm in size inclusive of all tees, bends, elbows, reducers, junction boxes, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. complete all as specified and directed.

S&F in repair Hylam sheet cover 3mm thick of size 125mmx125mm complete with machine screw/ washer with provision of switches, sockets, fan regulators etc complete all as specified

S&F in repair Hylam sheet cover 3mm thick of size 125mmx200mm complete with machine screw/ washer with provision of switches, sockets, fan regulators etc complete all as specified

S&F in repair Hylam sheet cover 3mm thick of size 200mmx275mm complete with machine screw/ washer with provision of switches, sockets, fan regulators etc complete all as specified

S&F in repair MS Sunken box of size 100mmx100mm with approved depth & thickness complete with earth dolly including making good the disturb surfaces CM (1:3) to match the existing complete all as specified

S&F in repair MS Sunken box of size 100mmx175mm with approved depth & thickness complete with earth dolly including making good the disturb surfaces CM (1:3) to match the existing complete all as specified

S&F in repair MS Sunken box of size 175mmx250mm with approved depth & thickness complete with earth dolly including making good the disturb surfaces CM (1:3) to match the existing complete all as specified

Note:- Net contract sum shall be calculated after deduction of Sch of credit.

M/s NIRMAN BUILDERS

M/s VISHAL ELECTRIC STORE