NIT 1110 Construction & Maintenance Road Under PMGSY-IV PKG No CG 03-235 District- Dantewada

PMGSY - IV Road BOQ

BILL OF QUANTITY in Year 2025-26

Package No. CG-03-235

Sl. No. S.O.R. Item No. Particulars Name Of Road L188 -L0188 Pahurnaar To Badekarka L=4.00 KM L193-L0193 Hidpal Road to km 3.00 To Balenapaal L= 3.85 KM L187 - L0187 Pahurnaar Road To Kaourgaon L=5.13 KM L198-L1098 Dongripara to Girsapara L=3.33 KM L195-L0195 Thothapara to Themrubhata Via Khalepara L=3.01 KM L189 - L0189 Talnar To Munder L= 6.59 KM Total Quantity Amount

Unit Rate Quantity Amount Quantity Amount Quantity Amount Quantity Amount Quantity Amount Quantity Amount

1 2.1 Setting Out Setting Out work complete with construction of bench mark (Min 1 per km) working benchmark (Min 4 per km) and near all bridges and cross-drainage works made of bricks/stone masonary or concrete and reference pillars made of precast concrete poles/concrete filled 100 mm dia A.C.pipe @ 100 m interval of as required on both sides of the formation width, marking on centre line, setting out curves and recording of centre line levels and other required levels and distances etc. including setting out of crossdrainage structures & bridges with required reference pillars and marking etc. as directed by Engineer-in-Charge. Km 20955.00 4.00 83820.000 3.85 80677.00 5.13 107500.00 3.33 69781.00 3.01 63075.00 6.59 138093.00 25.91 542946.00

2 2.2 Clearing grass and removal of rubbish up to a distance of 30 m outside the periphery of the area as per Technical Specification Clause 201. Sqm 1.00 14400.00 14400.000 13860.00 13860.00 18468.00 18468.00 11988.00 11988.00 10836.00 10836.00 23724.00 23724.00 93276.00 93276.00 #REF!

3 2.3A Clearing and Grubbing Road Land Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201. (A) In area of non-thorny jungle Sqm 7.00 16000.00 112000.000 15400.00 107800.00 20520.00 143640.00 13320.00 93240.00 12040.00 84280.00 26360.00 184520.00 103640.00 725480.00 #REF!

4 3.2 Compacting Original Ground / Existing Embankment. Loosening, Levelling and Compacting original ground/existing embankment/supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Tables 300.1 and 300.2 for embankment construction as per Technical Specification Clause 301.4.1. Cum 29.00 3510.00 101790.000 3411.00 98919.00 4617.00 133893.00 2997.00 86913.00 2709.00 78561.00 5931.00 171999.00 23175.00 672075.00

5 3.8 (i) Construction of unlined surface drains of average cross-sectional area 0.40 sqm in soil to specified lines, grades, levels and dimensions. Excavated material to be used in embankment with a lift upto 3m and lead of 50 m (average lead 25 m) as per Technical Specification Clause 307. M 88.00 3200.00 281600.000 3080.00 271040.00 4104.00 361152.00 2664.00 234432.00 2408.00 211904.00 5272.00 463936.00 20728.00 1824064.00

6 3.5 (ii) Excavation in Cutting in Soil by manual/ Machinery means Excavation for roadway in soil for carrying of cut earth to embankment site with a lift upto 1.5 m and lead upto 50 m as per Technical Specification Clause 302.3 Cum. 119.00 1484.53 176659.000 1484.53 176659.00 1139.79 135636.00 1248.50 148572.00 304.08 36185.00 1150.61 136923.00 6812.03 810634.00 #REF!

7 3.3 (i) Construction of Embankment with Material Obtained from Roadway Cutting (i) Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Tables 300.1 and 300.2 as per Technical Specification Clause 301.5 Cum. 77.00 3842 295803.000 4147 319312.00 4621.48 355855.00 3025.92 232996.00 1918.83 147750.00 4834.19 372233.00 22388.91 1723949.00

8 3.4 (ii) Construction of Embankment with Material Obtained from Pits Construction of embankment with approved material obtained from borrow pits, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 (Beyond 250m)with all leads as per Technical Specification Clause 301.5(Having CBR more than 5) Cum. 246.00 14153 3481581.000 5393 1326750.00 21920.78 5392512.00 16534.53 4067494.00 11342.12 2790161.00 27045.03 6653076.00 96388.50 23711574.00 #REF!

9 3.12 (a) Construction of subgrade and earthen shoulders with approved material (Granular material having CBR not less than 7) obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 as per Technical Specification Clause 303.1.For Item No.3.12(a) & (b) Cum 252.00 68.250 17199.000 40.950 10320.00 7967.79 2007882.00 2211.89 557396.00 2359.84 594680.00 4365.93 1100215.00 17014.64 4287692.00 17199.00

10 3.12 (b) Construction of subgrade and earthen shoulders with approved material (Granular material having CBR not less than 10) obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 as per Technical Specification Clause 303.1.(To be used for side shoulder WBM) Cum 280.00 2745.781425 768819.000 2657.95 744226.00 3484.36 975620.00 2314.41 648035.00 2092.85 585999.00 4568.29 1279123.00 17863.64 5001822.00 768818.80

11 4.1 (a) Granular Sub-base with Well Graded Material (CBR 20 or more) (Table 400.1) Crushed stone materials (CBR 35 or more) This item is to be used only, where local GSB material or GSB material with blending with other material is not available. Cum. 910.00 7.371 6708.000 7.37 6708.00 4005.24 3644771.00 2082.46 1895037.00 2172.29 1976787.00 4013.87 3652623.00 12288.61 11182634.00

12 4.8 Wet Mix Macadam Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406. Cum. 2069 2246.15 4647293.000 2164.80 4478970.00 4174.73 8637507.00 1932.73 3998816.00 1727.57 3574339.00 3719.10 7694816.00 15965.07 33031741.00 #REF!

13 5.1 Prime Coat Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502 Sqm. 60.00 15032.48 901950.000 14442.12 866528.00 19460.96 1167658.00 12894.98 773700.00 11517.12 691028.00 24942.12 1496527.00 98289.79 5897391.00 #REF!

14 5.2 (iii) Tack Coat (iii) Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503. Sqm. 18.00 15032.48 270585.000 14442.12 259959.00 19460.96 350298.00 12894.98 232110.00 11517.12 207309.00 24942.12 448958.00 98289.79 1769219.00 #REF!

14 5.6 Bituminous Macadam Providing and laying bituminous macadam with hot mix plant using crushed aggregates of grading as per Table 500.4 premixed with bituminous binder, transported to site laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per Technical Specification Clause 504. Bitumen(S-65) VG-30 Sqm. 10630.00 0.00 0.000 0 0.00 973.05 10343522.00 0.00 0.00 0.00 0.00 0.00 0.00 973.05 10343522.00 #REF!

15 5.13 20mm thick Open-Graded Premix Carpet using Bituminous Binder Mixing with processed Waste plastic (as per IRC:SP:98-2013) by replacement of 8% Bitumen binder by weight. Providing, laying and rolling of 20mm thick open-graded premix carpet (Thickness not less than 20 mm at any place) composed of 13.2 mm graded aggregate size @ 0.18 cum per 10 sqm & 11.2 mm graded aggregate size @ 0.09 cum per 10 sqm using with bitumenous binder @13.43Kg per 10 sqm (i.e. 92% of standard Bitumen and 8% waste processed plastic by weight shall be used for coating aggregate after its heating) as per IRC:SP:98-2013, laying to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades as per Technical Specification Clause 508 to be followed by seal coat of either Type A , Type B or Type C as per Technical Specification. Sqm. 179.00 15032.48 2690815.000 14442.12 2585140.00 0.00 0.00 12894.98 2308203.00 11517.12 2061565.00 24942.12 4464639.00 78828.83 14110362.00 15033.48 212127901362.000 #REF!

5.7 Mix Seal Surfacing Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.9 mm (Type-A) or 13.2 mm to 0.9 mm (Type-B) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 509, Viscocity grade (VG) Bitumen specification as per IS 73:2006 (II) Bitumen (VG-30) Sqm 196.00 0.00 0.000 0 0.00 19460.96 3814349.00 0.00 0.00 0.00 0.00 0.00 0.00 19460.96 3814349.00

16 5.5 Case II (B) Seal Coat Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per Technical Specification Clause 510, Viscocity grade (VG) Bitumen specification as per IS 73:2006 Case - II : Type B (II)Bitumen (VG-30) Sqm. 60.00 15032.48 901950.000 14442.12 866528.00 0.00 0.00 12894.98 773700.00 11517.12 691028.00 24942.12 1496527.00 78828.83 4729733.00 #REF!

17 7.10(i) Providing concrete for plain/reinforced concrete in open foundation complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 Cum. 5223.00 33.75 176277.000 20.25 105766.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 54.00 282043.00 #REF!

18 6.1 Cement Concrete Pavement (ii) Construction of un-reinforced, jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including leveling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying, primer, sealant, using curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501. Cum. 7136.00 0.00 0.000 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

19 6.8 Construction of Panel concrete Construction of Panel concrete, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade) coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed a in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including leveling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibratos and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, admixture as approved, curing of concrete slabs for 14 days. Curing compound (where specified) and water finishing to lines and grade as per drawing and technical specification Clause 1501. PCC Grade M-30 Each Panel (0.5 m x0.5m to 1.00m x 1.00m) thickness 100 mm. Cum. 7937.00 37.50 297638.000 22.50 178583.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 60.00 476221.00

22 9.2 (B) Retro-Reflective Traffic signs Direction and place identification signs up to 0.9 Sqm. sisn board Providing and erecting direction and place identification of Retro reflective sheeting classs A/ class B sign boards type IV as per IRC-67 made of 2 mm thick M.S. Sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70 mm width and required message, letters, figures with reflective tape of engineering grade as per MORI) specifications ofrequired shade and colour. Supported and welded on two nos.47 mm x 47 mm of 12 SWG square tube of 3050 mm height duty strengthened by 25 mm x 5 mm MS flat iron on edges on back firmly fixed to the ground by means of properly designed foundations with M-15 grade cement concrete 450 mm x 450 mm x 600 mmr 600 mm below ground level as per approved drawing and Technical Specification Clause 1701 Sqm. 6621.00 23.60 156256.000 23.01 152350.00 30.68 203133.00 20.06 132818.00 18.29 121099.00 38.94 257822.00 154.58 1023478.00

19 9.16 Providing & Fixing of PMGSY 'Logo' board Providing and fixing of typical PMGSY logo board as per MoRD specifications and drawings. Each 9276.00 3.00 27828.000 3.00 27828.00 4.00 37104.00 3.00 27828.00 3.00 27828.00 4.00 37104.00 20.00 185520.00

20 9.14 (B) A typical design of PMGSY informatory Sign Board is shown in fig. 1700.1 The specification and installation details ofthe typical sign board are given below: (i)The board will be a composite unit consisting of three plates of Alumininm Composite Materials (ACM), material specifications are per Clause 1701.3.7 The top most plate will be in diamond shape of 600 mn x 600 mm size, riveted over welded M.S. angle iron frame of 25 mm x 25 mm x 5 mm size on back on edges. The middle plate will be 1200 mm 150 mm size riveted over welded rvr.s. angle iron frame of 25 mm x 25 nm x 5 mm size on back on edges. The main Iower most plate wiII be 1500 mn x 600 mm size, riveted over welded M.S. angle iron frame of 25 mm x 25 mm x 5 mm size welding of all the sheets over angle iron frame will be done neatly to have plain surface on one side. The angle iron frames of the lower most plate and the middle plate will be welded to two nos. 75 mm x 75 mm (12 SWG ) sheet tubes posts placed at 1125 mm apart centre to centre. The top of the middle plate wilt be flushed with the top of 75 nm dia medium steel tube posts and these posts will be embedded in cement concrete M 15 grade blocks of 450 mm x 450 mm x 600 mm below ground level. The height of bottom of the lower nost plate will be 1200 mm from normal ground level and the bottom of middle plate will be 100 mm above the top level of the lower most plate. The diamond shaped plate mounted over angle iron frame will be connected to middle plate by square medium steel section of 47 mm x 47 mm thickness 12 SWG having a spacing of 100 mm between the diamond shaped plate and middle plate and this square section will be welded to the bottom point of the diamond shaped plate. (ii) The lettering and borders etc. of middle and bottom plate, pMGSy logo on top plates shall be as per clause 1701.4.6 messages/Borders. All the section of frame and posts will be painted with primer and two coats of Epoxy paint The steel tube below ground level will be painted with three coats of Epoxy paint The design, painting and lettering shall be done as per approved drawing. (iii) For warranty and durability the clause 1701.5 and for maintenance the clause 1911 shall be applicable. (iv) A reference number along with the month and year of installation should be placed on the back of a sing in a contrasting colour or by stamping in characters not exceeding 50 mm in height. Each 19249.00 1.00 19249.000 1.00 19249.00 1.00 19249.00 1.00 19249.00 1.00 19249.00 1.00 19249.00 6.00 115494.00

21 9.15 (A) Providing and fixing 'Citizen Information Board' of PMGSY Project (A) Providing and fixing of typical " PMGSY Citizen Information Board" with Logo as per MoRD specifications & drawings, made of 75 mm square or 75 mm dia circular steel tube of 12 SWG 3.2 m height and cross member 2 nos 1m long, fixed with angle iron 50x50x5 mm MS angle on the back Each 19621.00 2.00 39242.000 2.00 39242.00 2.00 39242.00 2.00 39242.00 2.00 39242.00 2.00 39242.00 12.00 235452.00

22 9.8 (i) Kilometer Stone Reinforced cement concrete M15 grade kilometer stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703 (I) 5th Kilometer Stone (precast) Each 5180.00 0.00 0.000 0.00 0.00 1.00 5180.00 0.00 0.00 0.00 0.00 1.00 5180.00 2.00 10360.00 #REF!

23 9.8 (ii) Kilometer Stone Reinforced cement concrete M15 grade kilometer stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703 (II) Ordinary Kilometer Stone (Precast) Each 3072.00 6.00 18432.000 5.00 15360.00 6.00 18432.00 5.00 15360.00 5.00 15360.00 7.00 21504.00 34.00 104448.00

24 9.8 (iii) Kilometer Stone Reinforced cement concrete M15 grade kilometer stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703 (III) 200 m stone (precast) Each 648.00 16.00 10368.000 16.00 10368.00 20.00 12960.00 13.00 8424.00 12.00 7776.00 26.00 16848.00 103.00 66744.00

25 9.17 Guard Stone Reinforced cement concrete M15 grade Guard Stone of size 200 mm x 200mm x 800 mm fixing in position including painting and printing etc. as per drawing, Technical Specification and as per direction of Engineer in Charge. Each 661.00 160.00 105760.000 154.00 101794.00 205.20 135638.00 133.20 88046.00 120.40 79585.00 263.60 174240.00 1036.40 685063.00

26 9.18 Road marking with Hot Applied Thermoplastic Compound with Reflectorizing Glass Beads on Bituminous Surface (Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorizing glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC: 35. The finished surface to be level, uniform and free from streaks and holes.) Sqm 846.00 936.00 791856.000 909.60 769522.00 1231.20 1041596.00 799.20 676124.00 722.40 611151.00 1581.60 1338034.00 6180.00 5228283.00

27 9.19 (A) Speed Braker Providing and laying rounded hump type of Speed Breaker confirming to IRC – 99 and as per guidelines and drawings of NRRDA circular no. DO No. P-17019/6/2006/PII Dated 16 Sept 2009, including providing, laying and compaction of GSB, G II, G III, OGPC, Seal Coat Type B, as per specifications and appended drawing on both the sides of carriage way up to formation width maintaining rounded hump type shape with bituminous mix material i/c providing and painting of black and white strips, providing and fixing of two no. 600mm equilateral semi reflecting sign boards, i/c cost of all materials, labour T & P & Machinery etc complete and as directed by engineer in charge as per relevant clauses of MORD specifications. For 7.50 M Formation Width Each 31566.00 1.00 31566.000 1.00 31566.00 1.00 31566.00 1.00 31566.00 1.00 31566.00 0.00 0.00 5.00 157830.00

28 7.6 (A) Providing and laying reinforced cement concrete pipe NP3 for Culverts/ Burried conduits on first class bedding of granular material including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets as per Clause 1106. (A) 600 mm dia RM 4099.00 200.00 819800.000 200.00 819800.00 262.50 1075988.00 175.00 717325.00 162.50 666088.00 337.50 1383413.00 1337.50 5482414.00

29 7.1 (i) Excavation for Structure as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. i. Ordinary soil i. Upto 3 m depth Cum 354.00 80.00 28320.000 80.00 28320.00 105.00 37170.00 70.00 24780.00 65.00 23010.00 135.00 47790.00 535.00 189390.00

30 3.5 (i) (i) Excavation in Cutting in Soil by manual means Excavation for roadway in soil for carrying of cut earth to embankment site with a lift upto 1.5 m and lead upto 50 m as per Technical Specification Clause 302.3 Cum 91.00 165.00 15015.000 1445.40 131532.00 0.00 0.00 0.00 0.00 0.00 0.00 387.75 35285.00 1998.15 181832.00

31 6.5 Construction of Plain Cement Concrete Drain with P.C.C. grade M-15 including all shuttering/form work etc. complete as per Cum 5335.00 63.00 336105.000 551.88 2944280.00 0.00 0.00 0.00 0.00 0.00 0.00 148.05 789847.00 762.93 4070232.00

32 7.27 Providing and laying reinforced cement concrete in superstructure as per drawing and technical specifications Clauses 800, 1205.4 and 1205.5 II.R.C.C M 25 (Design mix) Cum 6839.00 2.10 14362.000 18.40 125811.00 0.00 0.00 0.00 0.00 0.00 0.00 4.93 33750.00 25.43 173923.00

33 7.28 Supplying, fitting, and placing HYSD bar reinforcement in superstructure complete as per drawing and technical specifications Clauses 1002, 1010 and 1202 MT 76384.00 0.17 12833.000 1.47 112413.00 0.00 0.00 0.00 0.00 0.00 0.00 0.39 30156.00 2.03 155402.00

34 2.6 (A) Dismantling of Structures Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specification Clause 202. (A)Lime Concrete Cum 491.00 0.00 0.000 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 72.00 35352.00 72.00 35352.00

35 2.6 (C) Dismantling of Structures Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specification Clause 202. (C)Reinforced Cement Concrete Cum 1463.00 0.00 0.000 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 15.17 22191.00 15.17 22191.00

36 2.8a Dismantling Stone Masonry Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of stone masonry, including disposal of unserviceable material and stacking the serviceable material with all lift and lead of 1000 m as per Technical Specification Clause 202. (A) Rubble Stone Masonry in Lime/Cement/mud mortar Cum 350.00 0.00 0.000 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 302.72 105952.00 302.72 105952.00

37 2.10 (A) Removing all types of Hume pipes and stacking within a lead of 1000 m including Earthwork and Dismantling of Masonry Works as per Technical Specification Clause 202. (A) Upto 600 mm dia M 230.00 0.00 0.000 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 60.00 13800.00 60.00 13800.00

38 7.1 (i) Excavation for Structure as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. i. Ordinary soil i. Upto 3 m depth Cum 354.00 1137.85 402798.000 341.57 120917.00 2171.66 768768.00 888.77 314625.00 813.44 287958.00 1580.72 559574.00 6934.01 2454640.00

39 7.1 (ii) Excavation for Structure as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. (ii)Ordinary rock (not requiring blasting) i. Upto 3 m depth Cum 442.00 42.49 18779.000 0.00 0.00 127.46 56337.00 0.00 0.00 0.00 0.00 0.00 0.00 169.94 75116.00

40 7.8 Filling in Foundation Trenches as per drawing and technical specification Clause 1108 & 305.3.9 I. Sand filling Cum 1275.00 45.00 57375.000 45.00 57375.00 65.96 84103.00 50.88 64866.00 48.06 61280.00 75.94 96820.00 330.84 421819.00

41 7.10 (i) Providing concrete for plain/reinforced concrete in open foundation complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 I P.C.C grade M 10(Nominal mix (1:3:6) Cum 5107.00 28.32 144651.000 0.00 0.00 95.56 488036.00 17.65 90139.00 17.65 90139.00 0.00 0.00 159.19 812965.00

42 7.10 (ii) Providing concrete for plain/reinforced concrete in open foundation complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 II P.C.C grade M 15(Nominal mix (1:2.5:5) Cum 5223.00 350.88 1832652.000 122.73 641004.00 700.49 3658683.00 244.93 1279254.00 179.77 938957.00 1364.22 7125308.00 2963.02 15475858.00

43 7.18 (i) Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204 For height upto 5 m I P.C.C grade M 15 (Nominal mix (1:2.5:5) Cum 5387.00 483.17 2602820.000 41.07 221245.00 1339.27 7214650.00 124.87 672675.00 83.80 451431.00 578.75 3117726.00 2650.93 14280547.00

44 7.18 (ii) Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204 For height upto 5 m II P.C.C grade M 20 (Nominal mix (1:2:4) Cum 6042.00 486.00 2936412.000 216.00 1305072.00 0.00 0.00 567.00 3425814.00 538.72 3254947.00 0.00 0.00 1807.72 10922245.00

45 7.27 (ii) Providing and laying reinforced cement concrete in superstructure as per drawing and technical specifications Clauses 800, 1205.4 and 1205.5 II.R.C.C M 25 (Design mix) Cum 6712.00 67.60 453748.000 9.14 61336.00 172.37 1156941.00 9.14 61336.00 0.00 0.00 134.05 899731.00 392.30 2633092.00

46 7.28 Supplying, fitting, and placing HYSD bar reinforcement in superstructure complete as per drawing and technical specifications Clauses 1002, 1010 and 1202 MT 76384.00 3.67 279977.000 0.46 35006.00 9.51 726204.00 0.46 35006.00 0.00 0.00 6.76 516372.00 20.85 1592565.00

47 7.22 Providing weepholes in brick masonry/stone masonry, plain/ reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7 Nos. 335.00 302.00 101170.000 110.00 36850.00 256.00 85760.00 240.00 80400.00 364.00 121940.00 430.00 144050.00 1702.00 570170.00

48 7.4b Providing and Laying Reinforced Cement Concrete Pipe NP3 as per design Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause 1106. M 6485.00 0.00 0.000 0.00 0.00 22.50 145913.00 37.50 243188.00 37.50 243188.00 0.00 0.00 97.50 632289.00

49 7.23 (i) Backfilling behind abutment, wing wall and return wall complete as per drawings & technical specification Clause 1204.3.8 I) Granular material Cum 1025.00 343.07 351651.000 66.70 68371.00 777.01 796431.00 66.70 68371.00 0.00 0.00 948.43 972142.00 2201.92 2256966.00

50 7.23 (ii) Backfilling behind abutment, wing wall and return wall complete as per drawings & technical specification Clause 1204.3.8 II) Sandy material Cum 1603.00 108.00 173124.000 48.00 76944.00 0.00 0.00 126.00 201978.00 218.40 350096.00 0.00 0.00 500.40 802142.00

51 10.5 Providing and laying boulder apron for bed protection with stone boulders of minimum size and weight as per Table 1300.1, no fragment weighing less than 25 kg laid dry complete as per drawing and technical specifications Clause 1301 Cum 2016.00 14.76 29757.000 4.92 9919.00 377.50 761040.00 126.42 254863.00 121.50 244944.00 68.88 138862.00 713.98 1439385.00

52 7.24 Providing and laying filter media with granular crushed aggregates as per specification to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and providing over the entire surface behind abutment, wing wall, return wall to the full height, compacted to firm condition complete as per drawing and technical specification Clause 1204.3.8 Cum 1807.00 109.88 198559.000 20.09 36300.00 249.30 450479.00 20.09 36300.00 0.00 0.00 281.23 508186.00 680.59 1229824.00

53 7.41 (iii) Filler Joint (III) Providing and fixing in position 20 mm thick premoulded joint filler in expansion joint for fixed ends of simply supported spans, covered with sealant complete as per drawing and technical specifications RM 197.00 15.00 2955.000 0.00 0.00 45.00 8865.00 0.00 0.00 0.00 0.00 0.00 0.00 60.00 11820.00

54 7.41 (iv) Filler Joint (IV) Providing and filling joint sealing compound as per drawings and technical specifications with coarse sand and 6 per cent bitumen by weight. RM 49.00 15.00 735.000 0.00 0.00 45.00 2205.00 0.00 0.00 0.00 0.00 0.00 0.00 60.00 2940.00

55 7.31 Providing and laying cement concrete wearing course M 30 grade including reinforcement complete as per drawing and technical specifications Clauses 800 and 1206.3 Cum 12727.00 3.83 48681.000 0.00 0.00 11.48 146043.00 0.00 0.00 0.00 0.00 0.00 0.00 15.30 194724.00

Grand Total Amount in Lacs 340.90 260.04 694.43 307.67 267.82 600.61 2471.47 #REF!

Sub Engineer Assistant Engineer Executive Engineer 15.40

PIU CGRRDA PIU CGRRDA P.I.U.No-01 C.G.R.R.D.A.Dantewada

Dantewada Dantewada