Providing Lift Arrangements at Vaniyambadi GH in Tirupathur District

Amount

Design, Engineering, Supply, Fabrication, Erection, Testing, commissioning and handing over of 1 no 20 persons Bed Cum Passenger Gearless With machine room passenger lift as per the following specifications. 1.Location: OP Block at Vaniyambadi 2.No of lift: One No 3.Type of lift: Passenger 4.Capacity of lift: 20 persons /1360 Kgs 5.Speed: 1mtr / sec 6.Type of drive: V3F drive with enhanced ride comfort and near zero level functions 7.No of floors: GF+6 Floor 8.Total travel: 3.3MtrX6=19.8 mtr 9.Leveling accuracy: High level accuracy with smooth and jerk free stopping 10. Construction of CAR: No 4 hairline finish high quality stainless steel car hand rail granite flooring and Perspex false ceiling 300mm sweep fan and minor on back side for better aesthetics. 11. Position of machine: directly above the lift well. 12. No of landing service: front side-7 no’s 13. No. of car entrance: one in the front side 14. Car entrance door: power operated automatic V3F drive center opening sliding SS door hariline finish with full length infra red sensor for better safety 15. Landing entrance door: power operated V3F drive center opening sliding SS door hairline finish with provision for emergency exit key at all landings.

34. Automatic rescue device: to facilitate the lift to the landing of the nearest floor at the time of power failure this shall consist of suitable battery system with charger inverter under voltage protection system etc. complete with all accessories. 35. Provision for intercom with phone: to be provided by the lift contractor. 36.Lift license: preparation of drawings payment of charges to CEIG and insurance policy if any and obtaining CEIG approval for the lift as per lift act should be done by the lift contractor 37. Floor position announcer: to be provided by the lift contractor. 38.Special features a) Infra red door sensor with full height screen b) Full width half height rear panel mirror c)Tubular SS hand rail in car d) Stainless steel signal features e) Vandal proof SS button with SS cover f) SS door frames for landing doors g) V3F door operator h) Call register signal i) Stainless steel facia plates for car operating panel and landing fixtures j) Steel ladder for lift machine room k) On / off switch for fan and light l) Over load warning indicator with audio announcer

m)Voltage stabilizer for control circuits n)Braille button 39.Over speed governor phase failure and phase reversal relay alarm bell T guide brackets for car and counter weight rubber padding under the winding unit motor of adequate capacity speed reduction worm gear electromagnetic brake with compression springs car safety gears buffers electro mechanical locks emergency key side supporting angles motor over load protection devices final limit switch main suspension ropes counter weight lifting joist for mounting the machineries 40. Guarantee: guarantee at least for one year for the material and workmanship of equipments should be offered by the lift contractor. 41. Site testing in accordance with IS 14665 should be carried out at the time of handing over to the user department 42. Supply operation and maintenance manual and necessary tools for operation and a set of Spare parts required for one year.

Namakkal Constructions (BID ID -1554848)