REPAIR/REPLACEMENT OF TILING, FLOORING, JOINERIES, TANK CLEANING AND OTHER MISC B/R REPAIR WORKS AT BASISTHA AREA AND REPAIR/REPLACEMENT OF SEWAGE LINE, SEPTIC TANK, REPAIR TO PATH/HARDSTANDING/ UNDER GE GUWAHATI

Amount

Taking down chowkats with shutter (without taking off shutter from the frame) not exc 1.5 Sqm each. complete all as directed.

Taking down chowkat with shutter without taking off shutter from the frame exc 1.5 Sqm n.exc 4 Sqm each complete all as specified and as directed.

Taking down shutters n.exc 1.00 sqm each of any description complete all as directed.

Taking down shutters exc 1.00 sqm but n.exc 2.00 sqm each of any description complete all as directed.

Resecuring or easing & adjusting with/without taking down aluminum shutters exc 1.00 sqm but n.exc 2.00 sqm each of any description and refixing in existing postion after minor repair, correcting the alingment of shutter

M&L second class hardwood, Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed.

S&F mild steel hold fasts; for securing chowkhats and similar small articles conforming to Fe-290 Gde-E-165 incuding treating hold fast with tar or coal tar black paint, sanding complete all as specified and as directed.

M&L Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described, and treated with tar or coal tar black paint complete all as specified and as directed.

M&L providing plain cement concrete type C-1, (1:3:6), (using 20 mm graded stone aggregate), as in copings, fixing of hold fast, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed.

S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sidescomplete all as specified and directed.

S&F Factory made second class hardwood 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats

S&F Factory made second class hardwood 30mm thick Glazed and skeleton shutters, divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers open rebated and prepared to receive glass, gauze, etc. (with sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of windows, ventilators, etc. are provided with stiles and rails as specified in SSR Part I, Section 8 clause 8.24(b) supplied and fitted to chowkats complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete as required and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing as specified in SSR Part I, Section 8 complete all as specified and as directed.

S&F Colour coated (minimum thickness of powder coating 50 micron) Anodised aluminium frame for doors, windows, ventilators, partitions with one or more rebates including joining cleat for fixing etc. complete all as specified and directed Note:- Design/pattern, profile sizes and other dimensions shall be of standard sizes and as directed

S&F Colour coated (minimum thickness of powder coating 50 micron) anodised aluminium doors shutters including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, along with standard locking arrangements, handles, tower bolts etc as required. complete all as specified and directed Note:-(i) Labour charges for fixing of glass/wire guage is inclusive in the unit rate quoted. Glass/Wire Guage/locks shall be measured and paid seperately at supply only rates (ii) Design/pattern, profile sizes and other dimensions shall be of standard sizes and as directed

S&F Colour coated (minimum thickness of powder coating 50 micron) anodised aluminium windows/ventilators/partitions any type including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, along with standard locking arrangements, handles, tower bolts etc as required. complete all as specified and directed Note:- (i) Labour charges for fixing of glass/wire guage/aluminum grills is inclusive in the unit rate quoted. Glass/Wire Guage/aluminum grills shall be measured and paid seperately at supply only rates (ii) Design/pattern, profile sizes and other dimensions shall be of standard sizes and as directed

Supply only 5mm thick tinned glass, ordinary quality fixed with Aluminum frame work exc 0.5 sqm in each pane complete all as specified and as directed.

Supply only 4mm thick tinned glass glass, ordinary quality fixed with Aluminum frame work n. exc 0.5 sqm in each pane complete all as specified and as directed.

Supply only Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminum window/ventilator shutters complete all as specified and as directed.

Supply only 12mm thick Prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination, fixed to Aluminum frame work complete all as specified and as directed.

S&F in repair, Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks of stainless steel wire staples complete all as specified and as directed.

M&L for preparing new wooden surfaces of any description, not otherwise describe over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

S&F in repair 600x450mm bevelled edge mirror of selcted quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers all as specified complete all as specified and as directed

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames glazed with putty or fixed with beads complete all as specified and as directed

S&F 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed

S&F 125mm long Aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and as directed.

S&F 200mm long Aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and as directed.

S&F 300mm aluminium alloy sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy fixed complete all as specified and as directed.

S&F 150mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

S&F 100mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

S&F 100mm size Butt hinges, medium weight, cold rolled mild steel and fixed complete all as specified and as directed.

S&F 75mm size Butt hinges, medium weight, cold rolled mild steel and fixed complete all as specified and as directed.

S&F 100mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and as directed

Demolition of brick work built in cement mortar of any description including removing debries of the site, complete all as specified and as directed.

M&L Brickwork with sub class ‘B’ bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 incl demolition of old bricks complete all as specified and directed.

Taking down cement plaster on wall & ceiling of any description including racking out joints, hacking for key and scrubbing down with water etc complete including removing debries of the site, complete all as specified and as directed.

M&L 15mm thick rendering with cement mortar (1:4) on fair faces of brick work in two layers(10mm & 5mm) seperately mixed with water proofing compound in top layer as per manufacturer's instructions and finishing the surface even and smooth without using extra cement complete all as specified and as directed. Note:- WPC shall be measured and paid seperately under appropiate item.

Supply only liquid water proofing compound complete all as specified and as directed.

M&L Rendering 10 mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:6 for finished surface even and fair without using extra cement complete all as specified and as directed.

M&L prepartion of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M&L prepration of new plastered surfaces of wall applying two coat of oil emulsion distemper over a coat Chalk whiting, on plastered surfaces, including preperation of surfaces complete all as specified and as directed.

S&F 15mm bore GI pipe medium grade water tube with all fittings laid in floors fixed to walls and ceilings or laid in floors, including necessary taking down of exsisting old pipe complete all as specified and as directed.

S&F 20mm bore GI pipe medium grade water tube with all fittings laid in floors fixed to walls and ceilings or laid in floors, including necessary taking down of exsisting old pipe complete all as specified and as directed.

S&F 25mm bore GI pipe medium grade water tube with all fittings laid in floors fixed to walls and ceilings or laid in floors, including necessary taking down of exsisting old pipe complete all as specified and as directed.

S&F Rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top) (confoirming to IS 12701-1996) multi layer hoisted and fixed in position 500 ltrs capacity complete all as specified in SSR Part I, including necessary dismantling old unserviceablle tank complete all as specified and as directed

S&F Rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top) (confoirming to IS 12701-1996) multi layer hoisted and fixed in position 1000 ltrs capacity complete all as specified in SSR Part I, including necessary dismantling old unserviceablle tank complete all as specified and as directed

S&F in repair 15mm bore chromimum plated Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair 15mm bore pillar taps, cast copper alloy with capston heads, chromium plated, fancy type, screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed

S&F in repairs 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm - 210 gms) complete all as specified and directed.

Demoliation Cement concrete (unreinforced) Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as directed.

M&L 75mm thick cement concrete (1:3:6) type C-2( using 40mm graded crushed stone aggregate) as in plinth protection laid in alternate bays (not exceeding 2 Sqm each) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and as directed.

M&L for 25mm thick Cement concrete type B0, (1:2:4) (using 12.5mm graded stone aggregate) as in sub base of flooring for layind floor finishes complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing debries/rubbish from the site complete all as specified and directed.

M&L for light shade vitrified ceremic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exc 0.36 Sqm in floors etc set and jointed :in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed or bedding layer 1:6 complete all as specified and as directed.

M&L Non skid coloured tiles 7 to 8 mm thick(square/ rectangular) area of each tiles exc.0.11 sqm but not exc 0.18 sqm in floor etc set and jointed in neat cement slury over and including cement screed 15 mm thick 1:6 complete all as specified and as directed.

M&L Coloured glazed ceramic tiles 300 x 450 x 7 mm thick in vertical surfaces and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick backing with CM (1:4) complete all as specified and as directed.

M&L cleaning and degermination of water storage tank 500 Ltr capacitr of any description and in any position and making locking arrengment to tank cover comprising following seven stages of operation complete all as under (i) Drain out the water by using exit valve or our own high capacity dewatering system (ii) Cleaning all the algae formation inside the tank by using TERBAC G10 a laboratory tested branded chemical of the company and scrubbing the walls of the tanks. (iii) Fresh water cleaning by high speed jet pump with pressure 5 PSI. (iv) First bacteria screening is Sterilization by using TERBAC-G5 a Laboratory certified branded halogen compound, test certificate of TERBAC-G5 from government laboratory mentioning suitability for sterilization should be submitted to the office before using for sterilization . (v) Cleaning the floor of the water tank by heavy duty industrial vacuum cleaner. (vi) Second bacteria screening and sterilizing method by using ultra violet ray Ejector covering 360 degree with in the tank and kills all suspended bacteria. (vii) Cleaning and third bacteria screening is to sterilize the floor of the water tank by using laboratory certified branded strong oxidizing agent TERBAC- G65.Test certificate of Terbac- G65 From Government Laboratory mentioning suitability for sterilization should be submitted to the office before using for Sterilization.

M&L cleaning and degermination of water storage tank 1000 Ltr capacitr of any description and in any position and making locking arrengment to tank cover comprising following seven stages of operation complete all as under (i) Drain out the water by using exit valve or our own high capacity dewatering system (ii) Cleaning all the algae formation inside the tank by using TERBAC G10 a laboratory tested branded chemical of the company and scrubbing the walls of the tanks. (iii) Fresh water cleaning by high speed jet pump with pressure 5 PSI. (iv) First bacteria screening is Sterilization by using TERBAC-G5 a Laboratory certified branded halogen compound, test certificate of TERBAC-G5 from government laboratory mentioning suitability for sterilization should be submitted to the office before using for sterilization . (v) Cleaning the floor of the water tank by heavy duty industrial vacuum cleaner. (vi) Second bacteria screening and sterilizing method by using ultra violet ray Ejector covering 360 degree with in the tank and kills all suspended bacteria. (vii) Cleaning and third bacteria screening is to sterilize the floor of the water tank by using laboratory certified branded strong oxidizing agent TERBAC- G65.Test certificate of Terbac- G65 From Government Laboratory mentioning suitability for sterilization should be submitted to the office before using for Sterilization.

Supply only PVC cover/lid suitable for 500 Ltr PVC water storage tank, complete all as specified and directed.

Supply only PVC cover/lid suitable for 1000 Ltr PVC water storage tank, complete all as specified and directed.

Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc and getting out in soft/loose soil complete all as specified and as directed.

Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exceeding 25cm complete all as specified and as directed.

Removing excavated material n.exc 50m and depositing were directed at a level not exceeding 1.5m above the starting level complete all as specified and as directed.

M&L PCC (1:4:8) typeD2 with using 40 mm graded crushed stone aggregate as in mass concrete for base etc, including demoliation of existing concrete complete all as specified and as directed.

M&L PCC (1:3:6) type C-2 (using 40 mm graded agreegate) as in surface chanels and drains. complete all as specified and as directed by Engr-in-Charge

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and as directed.

Add to or deduct for each 25 mm girth or part thereof over or under 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and as directed. Note:- Rate quoted is for adjustment of rate only for the actual size excuted at site for the item no 67.00 mentioned as above

M&L 150mm bore pipes cement concrete bed to drain pipes with PCC(1:3:6) type C2 including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

M&L 150 mm dia (internal) salt glazed stoneware drain pipe grade 'A', laid in trenches and jointed as specified complete all as specified and directed.

Cleaning of blockage of Indian/European type water closet by using hand pump with rubber bucket or by opening the inspection eye by using cleaning rod etc till clear flow of water is observed and finally cleaning the water closet by flush of water complete all as specified and as directed.

Cleaning of blockage of floor/nahani trap by using hand pump with rubber bucket or by cleaning rod till clear flow of water is observed all complete all as specified and as directed.

Taking out of sludge water and semi solid materials/sludge including other foreign materials from the manholes/septic tanks not exc. 1.5meter deep and getting out, removing & disposing off the sludges by excavating required size pit, covering the pit with earth minimum 30 cm deep, spreading bleaching powder @ 1 Kg per pit complete all as directed. Notes:- (i) Unit rate shall be deemed to be inclusive of taking down of manhole cover & re-fixing the same in position after cleaning complete. (ii) Unit rate shall also be inclusive of removing sludge from manholes and deposited in excavated pit of size as directed by Engr-in-Charge, spreading lime poser over the deposited sludge in the pit & covered with earth. Measurement for sludge shall be taken from the excavated pit after allowing initial percolation of sludge water.

Taking out of sludge water and semi solid materials/sludge including other foreign materials from the manholes/septic tanks exc 1.5 meter and not exc. 3 meter deep and getting out, removing & disposing off the sludges by excavating required size pit, covering the pit with earth minimum 30 cm deep, spreading bleaching powder @ 1 Kg per pit complete all as directed. Notes:- (i) Unit rate shall be deemed to be inclusive of taking down of manhole cover & re-fixing the same in position after cleaning complete. (ii) Unit rate shall also be inclusive of removing sludge from manholes and deposited in excavated pit of size as directed by Engr-in-Charge, spreading lime poser over the deposited sludge in the pit & covered with earth. Measurement for sludge shall be taken from the excavated pit after allowing initial percolation of sludge water.

Taking out of sludge water and semi solid materials/sludge including other foreign materials from sump at sewage pumping station depth n.exc 15m with required mechanical pump of required capacity or by manually by using rope, bucket, ladder and scaffolding etc. and getting out, removing and disposing off the sludge in to a pit of required size made by excavating , and covering the pit with earth not less than 30 cm thick, spreading bleaching powder @ 1 Kg per pit over complete all as direted at site. Notes:- (i) Unit rate shall be deemed to be inclusive of taking down of cover & re-fixing the same in position after cleaning complete. (ii) Unit rate shall also be inclusive of removing sludge from sump and deposited in excavated pit of size as directed by Engr-in-Charge, spreading lime poser over the deposited sludge in the pit & covered with earth. Measurement for sludge shall be taken from the excavated pit after allowing initial percolation of sludge water.

Removal of blockage/chock up obstructing the flow in sewage line by rodding with rods/wooden kempti/chock remover and making the continuous flow between two manholes for 100mm bore of pipe complete all as specified and directed. Note : The clear distance between two manholes shall be measured.

Removal of blockage/chock up obstructing the flow in sewage line by rodding with rods/wooden kempti/chock remover and making the continuous flow between two manholes for 150mm bore of pipe complete all as specified and directed. Note : The clear distance between two manholes shall be measured.

Removal of blockage/chock up obstructing the flow in sewage line by rodding with rods/wooden kempti/chock remover and making the continuous flow between two manholes for 200mm bore of pipe complete all as specified and directed. Note : The clear distance between two manholes shall be measured.

Materials and labour for for PCC 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate as in coping benching etc and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for including cutting of reinforcement as necessary to facilitate demolition complete all as directed.

M&L precast reinforced cement concrete 1:2:4 (using 20mm graded stone aggregate) type B1 as in cover slabs and similar articles with plain faces and set in cement mortar 1:4 complete all as specified and as directed.

Materials and labour for TMT bars, 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally or hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified.

Taking down eaves gutter and rain water pipes ( any size or pattern) including all fittings, heads,shoes, bends, swan necks etc including cleaning or refixing or removal to store complete all as directed.( Measured overall as fixed along the centre line over fittings and accessories).

S&F 110mm bore UPVC ( SWR) Pipes single socketed, in any length with rubber ring joints,fixed to wall complete all as specified and directed.

S&F of 75 mm bore UPVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S&F 110 mm bore UPVC (SWR) bends any radius complete all as specified and directed.

S&F 75 mm bore UPVC (SWR) bends any radius complete all as specified and directed.

S&F 110mm bore UPVC ( SWR) junction, single (Single T) equal or unequal complete all as specified and directed.

S&F 75mm bore UPVC ( SWR) junction, double (double T) equal or unequal complete all as specified and directed.

S&F UPVC ( SWR) branch piece, single ( single -Y) equal or unequal 110mm dia complete all as specified & directed.

S&F UPVC ( SWR) branch piece, single ( single -Y) equal or unequal 75mm dia complete all as specified & directed.

S&F Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof sutable for 110 mm dia including drilling holes & fixed to wall with nails etc complete. all as specified and directed.

S&F Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof sutable for 75 mm dia including drilling holes & fixed to wall with nails etc complete. all as specified and directed.

S&F in repair Vitreous China, pedestal pattern white (excluding flushing cistern and flush pipe) including Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe), 'P' or 'S' trap, providing joints between flush pipe and socket of WC pan, cones, India rubber (nozzles of WC pan) including providing 150mm thick cement conrete bedding (type E2, 1:5:10, 40mm graded aggregate) complete all as specified and directed.

S&F in repair Grating square 100 mm size of PTMT (Minimum weight 25gms) complete all as specified and directed.

S&F in repair Grating square 125 mm size of PTMT (Minimum weight 40gms) complete all as specified and directed.

S&F in repair Grating square 150 mm size of PTMT (Minimum weight 100gms) complete all as specified and directed.

Demoliation of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L Rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:6 for finished surface even and smooth without using extra cement complete all as specified and as directed.

M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade, with grey cement and pigment complete all as specified and as directed.

M&L Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

M&L 100mm thick cement concrete (1:3:6) type C-2( using 40mm graded crushed stone aggregate) as in floor and finishing the surfaces even and fair without using extra cement complete all as specified and as directed.

Demoliation of concrete tiles of any description or thickness in floors, aprons etc., laid dry complete all as directed.

M.G. ENTERPRISE

M/S SEWAK SINGH