PROVISION OF CERTAIN MINOR WORKS INCLUDING INTERNAL AND EXTERNAL WALL PAINTING AT GTRE CASDIC CEMILAC ADE AND DEBEL UNDER GE I R AND D EAST BANGALORE

Amount

Demolition of PCC of any description and in any position complete all as specified and as directed.

Material and labour for 25 mm average thick Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished, including cement slurry, but excluding the cost of nosing of steps etc. complete all as specified and as directed.

Material and labour for Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete all as specified and as directed.

Material and labour for 18-20 mm thick Granite stone slab colour black, Cherry/Ruby red gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, steps, floor etc and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels complete all as specified and as directed.

All as per item no. 04 here-in-before but as in skirting including 12 mm thick screed bed in CM 1:3 complete all as specified and directed

Material and labour for 22-25 mm thick Kota stone slab for flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) all as specified and directed by Eng-In-Charge.

Material and labour for 10 mm thick internal plaster in CM 1:6 on other than fair faces of walls , finishing the surfaces even and smooth with out using extra cement complete all as specified and as directed.

Material and labour for preparation of plastered or unplastered surface and distempering 02 coats with oil bound washable distemper of approved brand and manufacture to give an even shade over and including water thinnable priming coat with cement primer all as specified and directed by Eng in Charge.

Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.

Dismantling of 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineer in-Charge

Material and labour for 15 mm nominal dia Pipes Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

All as per item No. 11 above but of size of 20mm bore complete all as specified and as directed.

Material and labour for repair of White Vitreous China Wash basin is 550x400 mm with a pair of 15 mm C.P. brass pillar taps, C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require, complete all as specified and as directed.

Material and labour for repair of 15 mm CP cast copper alloy bib tap long body with flang, ISI marked (Prayag catalogue no PIS-06 or equivalent techno commercial make given in PS) complete all as specified and as directed.

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead of area 3 sq. metres and below each complete all as specified and as directed.

Material and labour for pressed steel door frames conforming to IS: 4351, Profile B fixing with adjustable lugs with split end tail to each jamb manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards,lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge

Material and labour for 35 mm thick 2nd class hard wood factory made plain framed panelled, door shutter (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified and directed by Eng in Charge.

Material and labour for aluminium tower bolts, 150mmx10mm dia ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete all as specified and as directed.

Material and labour for 125mm aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete all as specified and as directed.

Material and labour for aluminium sliding door bolts, size 250x16 mm ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete all as specified and as directed.

Material and labour for preparation of old/new wooden surfaces for painting with Two or more coats on new work with synthetic enamel paint of approved brand and manufacture to give an even shade complete all as specified and as directed.

Dismantling C.I. or asbestos/PVC rain water pipe 110 mm dia pipe with fittings and clamps including stacking the material within 50 metres lead and as directed by Eng in Charge complete all as specified and as directed.

Material and labour for wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 110 mm diameter complete all as specified and as directed.

All as per item No 23 above but shoe for 110 mm dia pipe complete all as specified and as directed.

Material and labour for up to floor five level precast cement concrete solid block, including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete : 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) complete all as specified and as directed.

Material and labour for TMT bars all dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Material and labour for Reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing with complete all as specified and as directed.

Material and labour for formwork to soffits of suspended floors, roofs, landings, balconies and access platform complete all as specified and as directed.

Material and labour for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and as directed.

Material and labour for 5 mm thick plaster in CM 1:4 , as in ceiling, finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.

Material and labour for 12 mm thick prelaminated particle board with decorative lamination on one side and balancing lamination on other side conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-in-charge.

Removing excavated material exc. 1.50 km but n exc. 5 km and depositing where directed

Dismantling of old plaster or skirting, racking out joints, hacking for key, scrubbing down with water, remove dust, debries/ rubbish etc., and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead complete all as specified and as directed

Material and labour for 15 mm thick (external) cement plaster on concrete surfaces, plastered surfaces finished fair and even with cement mortar of mix 1:4 (1 cement : 4 fine sand) complete all as specified and as directed.

Material and labour for injecting approved grout in proportion recommended by the manufacturer into cracks/honey-comb area of concrete/ masonry by suitable gun/pump at required pressure including cutting of nipples after curing etc. complete as per directions of Engineer-in-Charge. Stirrer mixed Acrylic Polymer of approved make @ 2%of weight of cement used) modified Cement slurry made with non shrink compound in concrete/RCC work all as specified and as directed. Note: The payment shall be made on the basis of actual weight of approved grout injected.

Material and labour for washing, rubbing down and stopping of plastered surfaces and applying plaster of paris putty of 2 mm thickness over new plastered surface to prepare the surface even and smooth complete all as specified and as directed

Material and labour for applying two coats of Premium Acrylic Smooth exterior paint with Silicone additives on external walls of required shade (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and as directed

Material and labour for complete removal and applying two coats of Premium Acrylic Smooth exterior paint with Silicone additives on external walls of required shade (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and as directed

Material and labour for painting with synthetic enamel paint for steel work of approved brand and manufacture of required colour to give an even shade : One or more coats on old work of approved brand and manufacture and complete all as specified and as directed

Material and labour for Steel work welded in built up sections/ framed work/ square tubes framed work, including cutting, hoisting, fixing in position In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works and applying a priming coat of approved steel primer using structural steel etc. Complete all as specified and directed by Eng in Charge

Material and labour for cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)as fixing of frames in wall complete as directed by Eng in Charge

Material and labour for two coat of synthetic enamel painting steel/wall upto height 12 mtr work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture complete all as specified and as directed

Material and labour for Powder coated aluminium (minimum thickness of powder coating 50 micron aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately)

Material and labour for Prelaminated particle board of 9mm thick, exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work directed by Engineer-in-charge

Material and labour for Square surface mounted full panel LED luminaire 24 watt fitting 1’x1’ with white powder coated housing and frame in CRCA sheet, high efficiency LED grade diffuser, electronic driver duly wired upto terminal block, CRI>80, LED colour temperature – 5700k, IP20, 50000 burning hours as per L70 criteria, ambient temperature -0 to 50 Deg C, Driver efficiency >85%, THD<10%, PF>0.95, surge protection in CM-3KV, Multistage isolated constant current, constant voltage operated driver with range 100 lm/W-270V AC and safety extra low voltage safe level <60V DC as per IEC standard complete all as specified and as directed

Material and labour for Inverted Pyramid Tripod type LED bollard fitting with energy saving, environmental friendly, long life aesthetically designed die cast aluminium landscape luminaire for download lighting with high power LED as light source of 10 Watts with all accessories complete including dismantling old one specified and directed by Engr-in-Charge. Make: CG, Model : LIARA , Cat Ref : LBLSN-10-CDL or equivalent techno commercial makes provided in PS

Material and labour for laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core complete all as specified and as directed

Excavation in trenches not exceeding 1.5 m wide and not exceeding 10.00 sqm on plan and not exceeding 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed.

Returning, filling in excavated material (soil) including spreading, levelling, watering and well ramming in layers not exc. 25 cm complete all as specified and as directed

Removing excavated material to a distance not exc. 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and as directed

Material and labour for sand cushioning to under ground cable providing with a layer of 8cm thick before laying the cable and 15 cm thick after laying the cable complete all as specified and as directed. NOTE :- Punned thickness only will be measured for the purpose of payment.

Material and labour for common burnt clay building bricks sub class 'B' laid in trenches over sand cushioning for protection of UG cable in trenches complete all as specified and as directed.

Material and labour for LED street light fitting 120 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant 10 KV SPD included complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed by Engr-in-charge.

Material and labour for post top lantern LED type 40 watt 230 volts AC MAPLE warm white outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant including fixing with GI pipe light grade of size 50 mm having height 2mtr approx complete with driver and lamp complete all as specified and as directed.

Material and labour for LED flood light 120 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp with all fixing arrangement including taking down old one complete all as specified and as directed.

Material and labour for bollard fitting with warm white LED energy saving , environmental friendly, long life aesthetically designed die cast aluminium landscape luminaire for download lighting with high power LED as light source of 10 Watts with all accessories complete including dismantling old one complete all as specified and directed. Make: CG, Model : LIARA , Cat Ref : LBLSN-10-WW or equivalent techno commercial makes provided in PS

Material and labour for PCC (1:3:6) type C-1 using 20 mm graded aggregate for pole coping incl form work compaction etc all as specified and directed by Engineer-in-Charge.

Material and labour for passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 16 Sqmm 4 core nominal cross section in service connections complete connection with proper cable lugs all as directed and specified by Engr in charge.

Material and labour for laying of PVC conduit heavy duty of size 32 mm including drawing of cable inside complete and fixing with clamps, screws etc with wall/ground etc complete all as specified and as directed by Engr-in-charge.

Material and labour for DP sheet steel enclosure on surface/recess along with 25/32 Amps 240 Volts 'C' curve DP MCB complete with connections, testing and commissioning etc complete all as specified and as directed.

Material and labour for pole mounted junction box (street light boxes) Top hinged Door fixed with hinges on top of size 155mm x 210mm x 92mm made out of FRP sheet with weather proof, locking arrangements vertical operated with one No. 6 /10 Amps MCB SP, EPOXY. Technical connector upto 8 ways, fixed on pole with 25mm x 3mm MS flat iron clamps and painting with two coats of synthetic enamel paint over one coat of red oxide primer for fixing clamps including dismantling of existing unsv loop-in-box complete all as specified and as directed.

Material and labour for LED luminaire 600 mm x 600 mm, 36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders and LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed .

Material and labour for supply, install, testing and commissioning of five star rated hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with latest invertor technology with hot and cold having ECO friendely refrigerant gas, copper condenser coil of capacity of 2 TR including all fixing arrangement (as requirement at site) all as specified and directed by Engr-in-Charge. (including copper pipe and refrigerant gas).

Material and labour for voltage stabilizer for automatic operation, single phase naturally air cooled indoor type and designed for input variation between 170 volts to 250 volts with out put voltage stabilized at 230 volts with accuracy of +/- 2.5% and of capacity 5 KVA complete all as specified and as directed.

Material and labour for extra copper pipe of size 3/4" with nitrile rubber tubular insulation and copper cable using necessary supports and fastners complete all as specified and as directed.

Material and labour for extra copper pipe of size 1/2" with nitrile rubber tubular insulation and copper cable using necessary supports and fastners complete all as specified and as directed.

Material and labour for MS stand duly painted suitable for fixing 2 TR AC outdoor unit and fixed complete all as specified and directed

Material and labour for making opening / drilling of size 65 mm dia, using heavy duty stone driller/cutter machine in the stone machinery wall for installing spilt type air conditioners and for passing suction and discharge refrigerant pipe lines, drain pipe, cable etc and making good the disturbed surface complete all as specified and as directed.

Material and labour for 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. complete all as specified and as directed.

Material and labour for wiring for circuit/ submain wiring alongwith earth wire with the following size of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. (a) 2 X 4.0 sq. mm + 1 X 4.0 sq. mm earth wire

Material and labour for HDPE pipe 20 mm dia fixed to wall on roof complete all as directed.

Material and labour for Supply, install, testing and commissioning of three phase controlling unit to control the switching operation of Air conditioners in an alternative manner with PLC module. Rated current (In) of system is 63A at rated operational Voltage (Ue) of 415V AC ,with rated insulation voltage upto 500V AC voltage. Control unit shall have incomer with R Y B indications and all outgoing ckt shall have SCPD device in series with control devices. Control Unit enclosure shall be fabricated from CRCA sheet with sheet thickness of 1.6mm,finished with impact-resistant grey epoxy powder coating shade RAL7032 with IP54 degree of protection and suitable for wall mounted installations. Enclosure of control unit shall have earthing bolts for safety purpose and shall have detachable gland plates with for entry of cables ,with pad type locking facility also. Control Unit shall be manufactured in India at OEM plant and shall have QMS and EMS certifications like ISO9001, ISO14001 and ISO45001 to ensure good quality product complete all as directed and specified.

VP DEVELOPERS AND CONTRACTOR (BID ID -3475171)