PROVISION OF TOILET, INTERLOCKING TILES AND WEATHER PROOF PAINT AT AF STATION VARANASI UNDER GE(AF) GPRAKHPUR

Amount

Surface dressing in soft loose soil not exceeding 15 cm deep,Complete all as specified and directed.

Excavating in trenches, not exceeding 1.5 mtr wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm, all as specified and directed.

Removing excavated material not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point, All as specified and directed.

M & L for broken stone hard core of gauge n exc 63 mm , deposited , spread and levelled in layers n exc 15 cm thick , watered and rammed to a true surface, all as specified and directed.

M&L for PCC (1:4:8) type D-2 using( 40mm graded stone aggregate ) as in foundations, filling and mass-concrete compete all as specified and directed.

M&L for reinforced cement concrete (nominal mix) in shelves supported on walls with cement concrete type B1 1:2:4 using 20mm gde agg complete.

PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in benching and the like including weathering , slightly rounded or chamfered angles and throating as directed and necessary formwork complete all as specified and as directed .

M&L for RCC (1:1½:3) type A1 using 20mm graded stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams,plinth lintel band; bases for columns, etc, and mass concrete complete all as specified and directed.

M&L for RCC (1:1½:3) type A1 using 20 mm graded stone aggregate as in Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for RCC (1:1½:3) type A1 using 20 mm graded stone aggregate in Slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in the shelves etc complete all as specified and directed.

M & L for (1:1½:3) type A1 using 20 mm graded stone aggregate as in beams, contilevers, bressumers, lntel over 1.5 m span etc. complete all as specified and directed

Providing, precast reinfoced cement concrete as in mamholes covers 1:2:4 type B-1 (using 20mm graded crushed stone aggregate )set in cement mortar 1:4 complete all as specified and as directed . (Reinfocement shall be measued and paid for seperately) .

M&L Brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 complete all as specified and directed.

Brickwork with sub-class `B' brick straight or curved on plan to any radius in half brick thick walls, built CM in 1:6 complete all as specified and directed.

Formwork to soffits of suspended slabs such as shelves not exceeding 200mm thick rough finished surfaces of concrete flat surfaces complete

M&L formwork to sides of pillars, posts, struts, piers, columns, and stanchions complete all as specified and directed .

M&L Formwork flat and fair finished to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) complete all as specified and directed.

Form work to edges of concrete flat exceeding 5 cm but not exceeding 10cm wide for rough finished surfaces of concrete complete all as specified and directed.

Form work to edges of concrete flat exceeding 10 cm but not exceeding 20cm wide for rough finished surfaces of concrete complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc, complete all as specified and directed.

S&F anodised aluminium powder coating frame for doors, windows ventilator with one or more rebates including cleat for fixing etc, thickness of powder coating 50 micron complete all as specified and directed.

S&F Anodised aluminium powder coating window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc thickness of powder coating 50 micron .complete all as specified and directed

S&F Factory made PVC single door frame of size 50x47 mm with a wall thickness of 5 mm thick sheet moulded teak face colour sheet reinforced with 19mmx19mm square tube having wall thickness 19 gauge complete all as shown in sketch on page 160 of SSR 2010 Part-II.The door frame to be fixed to the wall using MS screw 75 mm long with PVC fastener complete as specified and directed.

S&F factory made solid panel PVC door shutters 30 mm thick( Style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with 5 mm thick pvc sheet strip 20 mm wide struck inside with solvent cement for stiles and 5 mm thick PVC sheet for top rail,lock rail,bottom rail on either side and 10 mm (5mmx2mm)thik,20 mm wide cross PVC sheet as gap insert for topand bottom rail paneling of 5 mm thick teak face colour PVC sheet to be fixed in MS frame welded/sealed to the stiles and rails with 5mmx30mm PVC sheet beading and jointed together with solvent cement complete all as shown in drawings given on page 156 of SSR 2010 part-II.The width of stiles and rails shall be as specified in para 8B2.1 on page143 of SSR 2010 part-II.Each PVC door shutter leaf shall consists of 4 nos 100 mm long MS butt hinges includings screws all as specified and directed.

S&F 150 mm long aluminum anodized barrel tower bolt of extrude section, fixed with screw complete all as specified and directed.

S&F aluminum handles, cast type anodized (size of handle 125mm) fixed with screw complete all as specified and directed.

M&L for Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L for Mild steel bars 6 to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia as in stirrups, complete all as specified and directed.

M&L for Mild steel framed work as in framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc., n exc 10 kg each brackets, conforming to Fe 290-0 grade E-165 complete all as specified .

M&L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 (using 20mm crushed stone aggregate ) surface smooth finished and reforming benching as required for internal dia of pipe 150mm complete all as specified and as directed.

M&L for roof treatment in roof including cleaning the the roof surface and applying bituminous primer @ 0.20 kg per sqm , providing and laying 4 mm thick APP water modified water proofing membrane not less than 4 kg per sqm reinforced with non woven polyster mat weighing not less than 800 N per sqcm trearing not of 180 N (by torch application method) with minimum of 10 cm side laps and 15 cm end laps by application of torch applying a coat of blown grade hot bitumen 90/15 grade over the membrane @ 1.20 kg /per sqm complete all as specified and directed.

M&L 75 mm thick cement concrete type -C2 (1:3:6) using 12.5 mm stone aggregate as in sub base of plinth protection all as specified and directed.

M&L 100 mm thick cement concrete type D2 (1:4:8) using 40 mm stone aggregate as in sub base of floor all as specified and directed.

M&L 30 mm thick cement concrete type B0 (1:2:4) using 12.5 mm stone aggregate as in sub base of floor tile all as specified and directed.

M&L 20mm thick screed bed or bedding layer of mortar in CM 1:6 for laying floor finishes neat cement slurry with 3.00 kg of cement per sqm complete all as specified and directed.

S&F joint free Designer non-skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match.complete all as spfd and tile by Eng-in-Charge.

M&L for Glazed ceramic coloured tiles 350x250x6- 7mm thick with highliter concept on vertical surfaces of wall set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick rendering in CM (1:4) backing of wall tiles such as dado/skirting in vertical surface complete all as specified and as directed.

M&L for laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and weeping extra sand, complete all as specified and directed.

M&L for laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed.

M&L for laying at or near ground level, factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete complete all as specified and directed.

M&L for 40mm thick sand stone slabs polished, set and jointed in cement and stone dust mortar 1:3 and pointed in cement mixed with approved pigment to match, omplete all as specified and directed.

M&L for 25mm thick Granite (of any type) work (table rubbed and polished) in wash basin platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite as specified and directed.

S&F 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors. Complete all as specified and directed.

M&L for cement concrete Type B1( 20 mm graded aggregates) 1:2:4 as in sides of interlocking tiles.Compete all as specified and directed.

M&L rendering 15mm thick on other than fair finish of bricks / concrete surface of wall in CM (1:4) using WPC and finished the surface even and smooth without extra cement ( WPC to be measured and paid seperately ) complete all as specified and directed .

M&L 10 mm thick cement plaster on fair surfaces in CM 1:6 on brick or concrete surfaces finished the surfaces even and smooth without using extra cement all as specified and directed .

M&L 5 mm thick rendering on concrete surfaces such as sides of roof beams, soffits of roof slab (ceiling )etc in CM 1:3, finished fair & smooth without using extra cement all as specified and directed .

M&L rendering 15mm thick on other than fair finish of bricks / concrete surface of wall in CM (1:4) using WPC and finished the surface even and smooth without extra cement ( WPC to be measured and paid seperately ) complete all as specified and directed .

M&L for Rendering 5mm thick in CM 1:3 on concrete surfaces finished even and smooth without using extra cement, including taking down cement plaster,raking out joints, hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for providing and applying minimum 2 mm thick wall care putty over prepared surfaces to achive the surface even and smooth for painting. Complete all as specified and directed.

M&L for preperation of newly plastered wall surfaces and apply two coats of oil bound distember with putty Birla white all as specified and directed.

M&L for preperation of newly plastered ceiling surfaces and apply three coats of white lime wash all as specified and directed.

M&L for preperation of newly plastered wall surfaces and apply two coats of Cement base paint with putty Birla white all as specified and directed.

Supply only liquid water proofing compound (ISI Marked)

M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/Ltr and UV resistance as per IS 15489:2004, Alkali & fungal resistant dirt resistance exterior paint of require shade (Company Depot Tinted) with silicon additives @ 1.43 Litre/ 10 Sqm over and including priming coat of exterior primer applied @ 0.90 Litre / 10 Sqm, include wall treatment compound (polymer) for any capillary action, all as specified and directed. (Note:- Primer emmulsion to be carried out throgh air less spray machine/Machanical means)

M&L for preparation of old painted steel surfaces of any description, over 10cm width or girth and apply one coat of synthetic enamel paint complete all as specified and as directed .

Complete removal of existing treatment of wall/roof projection including facia,cornices etc by scraping with mechanical vaccum mechanism with sanding pad of appropriate grit to make surface clean,free from dust, loose paint etc by skilled labour complete all as specified and directed.

M&L for taking down cement plaster any description on brick or concrete walls, etc including raking out joints, hacking for key scrubbing down with water etc rendering 15 mm thick in CM 1:6 mixing with pidi Proof 101 LW (+) of Dr fixit or equivalent integral water proofing admixture @ 200 ml/bag over two coats of super latex 302 of Dr fixit or equivalent in the ration (1:4:7),(one part super latex,4 part water and 7 parts of cement)@ 1.5 kg of homogenious mixture/Sqm in two coats and finish the surface even and smooth without using extra cement) for walls complete all as per spcefication and directed (Pidi proof and super latex to be measured and paid separately)

Supply only Pidi proof 101 LW (+)

Supply only Super latex 302.

S&F 5.50 mm thick Sheet glass is ground or obscured or frosted , on one side, superior quality and glazing with oil putty in square n exc 0.5 sq. m in each pane fixed in aluminium beading,rubber packing in aluminium frame, window and door complete all as specified and directed.

S&F Galvanised iron water tubing 15 mm bore medium grade galvanised including short lengths fixed to wall / concealed in wall /ceiling or laid in floor complete with all fittings, such as bend, elbow,tees, short pieces,connectors,back nuts diminishing pieces, cap and plugs,unions etc, all as specified and directed.

S&F Galvanised iron water tubing 20 mm bore medium grade galvanised including short lengths fixed to wall / concealed in wall /ceiling or laid in floor complete with all fittings, such as bend, elbow,tees, short pieces,connectors,back nuts diminishing pieces, cap and plugs,unions etc, all as specified and directed.

S&F PVC (SWR) pipes 110mm external dia double socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F PVC (SWR) pipes single scoketed in any length with rubber ring joints fixed to walls of 110 mm bore incl taking down of unserviceable pipe, all as specified and directed.

S&F PVC (SWR) bends any radius for 110 mm bore provided with access door, all as specified and directed.

S&F PVC (SWR) junction single, (single T) equal or unequal of 110mm dia all as specified and directed.

S&F PVC (SWR) junction single, (single T) equal or unequal of 75mm dia all as specified and directed.

S&F PVC(SWR) bends suitable for 75 mm external dia, complete all as specified and directed.

S&F PVC(SWR) pipes, 75 mm external dia double socketed in any length with rubber joints, fixed to walls/floor, omplete all as specified and directed.

S&F PVC waste pipe 32mm dia, 60 cm long for WHB/Urinal with long screw shanks and fly nuts, flanges end bedded in red lead cement and other fixed complete, omplete all as specified and directed.

S&F in 10 Ltrs capacity PVC flushing cistern valveless, syphonic action type, low level,white, with inlet, ball wall, float and handle including brackets and connecting to pipes and fixing of chain and pull or lever if any complete all as specified and directed.

S&F in repaires 10 Ltrs capacity PVC flushing cistern valveless, syphonic action type, low level,white, with inlet, ball wall, float and handle including brackets and connecting to pipes and fixing of chain and pull or lever if any complete all as specified and directed.

S&F grating doom of size 125mm dia with waste hole of PTMT (min weight 50grams) complete all as specified and directed.

S&F in repair grating doom of size 125mm dia with waste hole of PTMT (min weight 50grams) complete all as specified and directed.

S&F Rotational molded polyethylene water storage tanks (cylindrical vertical with threaded lead) hoisted and fixed in position all as specified in SSR Part-I of Capacity 1000 litres all as specified .

S&F in 20mm PVC Nipple suitable for HDPE Water tank (Min Wt 15mm-38gms) complete all as specified and directed.

S&F in 15mm PVC Nipple suitable for HDPE Water tank (Min Wt 15mm-38gms) complete all as specified and directed.

S & F ball brass valves high pressure with polyethylene float and fly nut complete screwed for iron pipe or brass ferrule and fixed to 20 mm bore , complete all as specified and as directed.

M&L PVC (SWR) 'S' or "P' trap 125/110 mm, setting and jointing with solvent cement complete alll as specified and directed.

M&L PVC (SWR) nahani plain with grating including jointing with solvent cement complete all as specified.

S&F stop valves 15mm bore dia fancy type,chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed all as specified and directed .

S&F stop valves 20 mm bore dia fancy type,chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed all as specified and directed .

S&F in 2-Way bib cock with wall flange size 15mm Make:- Jaquar Cat Part No :- ARI-39037 complete all as spfd.

S&F Angle cock with wall flange size 15mm Make:-Jaquar Cat Part No.:- OPP-15053PM or equavalent, all as specified and directed.

S&F Single piece WC with PP soft close seat cover, hinges, fixing accessories, Accessories Set and Cistern fittings. Size:370X690X680 mm, S trap- 300 mm.Cat Part No. CNS-WHT-851S300SPP of Make: Jaquar or equavalent, all as specified and directed.

S&F Toilet paper holder flap recessed type (Stainless Steel). Cat Part No. AHS-1553 ofMake-Jaquar or equavalent, all as specified and directed.

S&F Hand Shower (Health Faucet) with 8mm dia, 1.2 m long flexible tube & wall hookwith N.R.V. (Back flow preventer). Cat Part No. ALD-577 of Make -Jaquar or equavalent, all as specified and directed.

S&F Soap Dispenser with glass bottle. Cat Part No.: CAN-1135N.Make-Jaquar or equavalent, all as specified and directed.

S&F concealed stop cock with fitting sleeve,operating lever and adjustable wall flange size 15mm Make:- Jaquar Cat Part No.:- ALD-083, ALD-089 & ALD-081 or equavalent, all as specified and directed.

S&F looking mirror of 600x450 mm with PVC moulded frame with 6mm thick hard board backing complete all as specified and directed.

S&F PVC connection 15 mm bore with PTMT nuts of length 450 mm long Make : Jaquar Cat part No ALD - CHR-803AB or equavalent, all as specified and directed.

S&F in 15 mm bore center hole single lever basin mixer with regular spout with pop up waste assembly with 10 mm dia 450 mm long braided connection pipe and provision for pop-up Make:- Jaquar Cat Part No.:- KUP-35051BPM or equavalent, all as specified and directed.

S&F in Wall mixer (3-in-1) system with provision for both Hand shower and over head shower complete with 115 mm long bend pipe, connecting legs & wall flange ( without hand & overhead shower) . Make :- Jaquar Cat Part No:- QQP-7281PM or equavalent, all as specified and directed.

S&F Stainless steel single towel rail 600 mm long Make :- Jaquar Cat Part No:- AQN-7711 or equavalent, all as specified and directed.

S&F Glass self 600mm long Make :- Jaquar Cat Part No :- AKP-35771 or equavalent, all as specified and directed.

S&F in overhead shower 105 mm dia round shape multi flow with air effect (ABS body & face plate Chrome plated) with rubit cleaning system Make:- Jaquar Cat Part No:- OHS-1719 or equavalent, all as specified and directed.

S&F Waste coupling 32mm size half thread with 80mm height. Cat Part No.: ALD-709. Make - Jaquar or equavalent, all as specified and directed.

M& L Thin rim table top basin, Shape-Oval, Size:500X380X120mm.Cat Part No. JDS-WHT-25937of Make-Jaquar or equavalent, all as specified and directed.

S&F in repair vitreous china wash down water closet pan (pedestal pattern with including trap, seat cover, including connection to trap /drain and to flushing pipe anti syphonage pipe etc complete including making good floor complete all as specified and directed.

S&F in repair 15mm dia bib taps chromium plated fancy type with crutch or butter fly handle, screwed down screwed for iron pipe or brass ferrule and fixed, all as specified and directed.

S&F in repair vitreous China wash basin, angle back, size 600x480mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets, all as specified and directed.

S&F in repair angle cock with wall flange size 15mm Make:-Jaquar Cat Part No.:- OPP-15053PM or equavalent, all as specified and directed.

S&F in repair PVC connections 15 mm size with PTMT nuts of length 600 mm long, all as specified and directed.

S&F in repair stop valves 15mm bore dia fancy type,chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed all as specified and directed .

S&F in repair stop valves 20 mm bore dia fancy type,chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed all as specified and directed .

S&F in repaire 15mm bore pillar taps, CP bras with chromium plated type screwed down high pressure, with chromium plated screwed shanks and fly nuts complete scewed for iron pipe and fixed all as specified and directed.

S&F in repaire looking mirror of 600x450 mm with PVC moulded frame with 6mm thick hard board backing complete all as specified and directed.

S&F in repair vitreous china urinalhalf stall type white including waste pipe and coupling (Excluding flushing cistern , flush pipe and waste pipe) complete, all as specified and directed.

S&F in repair 2-Way bib cock with wall flange size 15mm Make:- Jaquar Cat Part No :- ARI-39037 or equavalent, all as specified and directed.

S&F in repair Hand Shower (Health Faucet) with 8mm dia, 1.2 m long flexible tube & wall hook with N.R.V. (Back flow preventer). Cat Part No.: ALD-577. Make -Jaquar, or equavalent, all as specified and directed.

S&F in repaire brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges, all as specified and directed.

Demolition of brick work or stone / boulder masonry, built in cement mortar or cement lime mortar including all quains, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed .

Taking down chowkhats and frame exc 1.5 Sqm but n.exc 4 Sqm each with shutters (without taking off shutters from the frames) area not exceeding 1.50 sqm each including cutting holes for removal of hold fast and removing from site complete all as specified.

Taking down chawkhats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each including cutting holes for removal of hold fast and removing from site complete all as specified and directed.

Taking down cement plaster on brick walls etc, including racking out joints, hacking for keys, scrubbing down with water etc & prepare surface to receive new plaster and rubbish of the premises all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed.

Taking up or down steel tubing 15mm bore including cleaning for refixing or removal from site complete all as specified and directed.

Demolition of Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (Light,fan,socket are power) complete fitting such as switches, ceiling rose, regulator, sockets etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of wall, floors, etc. all as specified and directed.

M&L light fan point controlled by one switch with PVC insulated, unsheathed , multi stranded, single core copper conductor FRLS ( Flame Retardant Low Smoke) cable 1.50 Sqmm suitable for fixing in concealed PVC conduit of size not less than 20 mm dia with metal flush boxes including white cover plate with frame of required module.Metal flush box should not less than 2 mm thick duly painted inside and outside with two coats of synthetic enamel paint over one coat of red oxide primer of required module suitable for housing modular switches, socket, fan regulator etc. PVC insulated, unsheathed, multi stranded, single core copper conductor FRLS cable 1.50 Sqmm used as earth wire to commen earth and connected to common dolly drawn in same conduit all as specified.

All as per item No 122 above but socket 5 amp on independent board.

All as per item No 122 above but one 3/5 pin socket out let 5 amp on same board with other switches.

All as per item No 122 above but socket out let 3/6 pin 15 Amp with 2.5 sq mm size copper conductor for power point on indipendent board.

Supply & Fixing switch modular single pole, one way 6 Amp ,01 module.

Supply & Fixing switch modular single pole, one way 16 Amp ,01 module.

Supply & Fixing modular socket 6 Amp-2/3 pin combined ,2 module.

Supply & Fixing modular socket 6/16 Amp-2/3 pin combined ,2 module.

Supply & Fixing ceiling rose surface backlite 65X20 mm two to three terminals complete.

Supply & Fixing lamp holder PVC / Ploycarbonate type.

Supply & Fixing LED lamp 9 Watt .

Suply and fixing engineering plastic batten with white acrylic cover LED light ( integrated LED channel) natural white,energy saving complete with its all acessories internally perwired and including connecting up with twin core twistered flexible copper conductor cable of suitable size complete all as specified and directed of 20 W, all as specified and directed.

Supply and fixing engineering plastic batten with white acrylic cover LED light ( integrated LED channel) natural white,energy saving complete with its all acessories internally perwired and including connecting up with twin core twistered flexible copper conductor cable of suitable size complete all as specified and directed of 09 W , all as specified and directed.

Supply & Fixing integral LED bulkhead luminaire, 10 W, 230 Volts, IP 65 protection decorative surface mounted , complete with all accessories pre wired and including connecting up with twin core twisted flexible copper conductor of suitable size, all as specified and directed.

Supply & fix exhaust fans heavy duty complete steel body and copper winding fan motor,1400 rpm ,AC single phase 230/ 240 V, 50 Hz AC, of size 300 mm sweep with louver including breaking necessary hole in wall for fixing the exhaust fan and making good to disturbed surfaces with cement mortar to match with existing after commissioning, all as specified and directed.

Taking down carefully copper/aluminium power/sub main wiring of any size / type all as specified and directed.

M & L for power/sub main wiring with two runs of single core 6 sqmm size and one run of single core 4.0 sqmm (green colour as earth continuty conductor ) PVC insulated unsheathed multi stranded copper conductor cables drawn through and including rigid PVC conduit complete all as specified and directed.( Note - two runs of 6 sq mm single core copper conductor and one runs of 4.0 Sq mm copper conductor shall be measured as one unit length.)

Supply & Fixing sheet metal enclouser MCB DB double door bus bar neutral link,earth bar and din rail SPN 4 way, all as specified and directed.

Supply & Fixing MCB SPN 32 Amps 240 volts, 10 KA, "C" curve, all as specified and directed.

Supply & Fixing MCB SP 5 to 32 Amps 240 volts, 10 KA, "C" curve, all as specified and directed.

Taking down the existing defective LT UG cable from trenches / pipes / pole for fault finding / replacement, all as specified and directed of any size between 10 Sq mm to 50 Sq mm 3.5 core/4 Core, , all as specified and directed. ( Note-Excavation and earth work will be measured and paid seperately under relevant item. )

Supply and laying ,jointing and testing XLPE insulated extruded PVC outer sheath and inner sheath galvanized steel armoured cable with aluminium conductor suitable for rated voltage of 1100 Volts grade conforming to IS 7089 (Pt I of 1988) laid in tranches/ pipe/duct/pole complete all as specified and directed size10 Sqmm 2 core, , all as specified and directed.

Supply & laying sand cushioning for cable protection in trenches 8 cm before laying cable and 15 cm thick over the cable complete all as specified and directed.

Supply & laying brick for protection of cable sub class 'B' laid dry flat across the cable with width equal to the length of whole bricks complete all as specified and ditected.

Labour for boring, holes for inserting of 40 mm bore pope under the road/hard standing or any other location not less than 1200 mm deep complete all as specified and ditected.

M & L GI pipe 40 mm bore light grade fixed on pole/under road/on wall for protection of cable including all fittings complete all as specified and directed.

Prem Singh

M/S SHRI RC YADAV

M/S SWATI CONSTRUCTION

M/S DEEKSHA CONSTRUCTION