Construction of Paver Block Footpath at Lalbazar Dhanhati under Nagar Lal Bazar G.P. within Sitalkuchi P.S. SL5

Box cutting or filling in Road embankment in all sorts of soil including spreading the spoils properly over the flank as necessary or on berm to approximate grade & camber and rolling the sub-grade with power roller to proper camber and grade as per direction and satisfaction of Engineer-in-charge including uprooting and removing plants and jungles when and where necessary. Depth up to 150 mm

By Mix in Place Method : Construction of granular sub -base by providing graded material, mixing by mix in place method with Rotavator at OMC, spreading in uniform layers with Motor wader on prepared surface in proper grade and camber, compacting with vibratory, roller to achieve the desired density, including lighting, guarding, barricading, including cost of all materials, machinery, tools and plants including cost of quality control complete as per Clause 401 of Specifications for -Road & Bridge Works of MoRT&H (5th Revision). G.S.B. Grading:-I

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling withvibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening / binding materials to fill up the interstices of coarse aggregate, watering including lighting, guarding, barricading and making necessary earthen bundh of one metre width on each side and preparing the bed by necessary cutting or filling, including cost of all materials and hire and labour charges of all men and machinery and compacting to the required density, as per Clause 404 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).

Supplying and Laying in the specified pattern of Interlocking Concrete Block Pavements (ICBP) with concrete block', (with concrete grade as specified as per Table 1 of IS 15658:2006) manufactured in steel mould clamped to a vibrating table by hydraulic pressure (us per cl. no. 630 of IRC : SP ; 63 (2018), from BIS licensee manufacturer, with spacer nib /Small protruding profiles on thevertical face of a paver block used as a device for keeping minimum joint gap inbetween the paving blocks, as per Cl. No 3.26 of IS: I5658)and of specified sizeand shape with aspect ratio (The ratio of length to thickness of a paver block, asper CLNo33 of IS: 15658) as per Table 2 of IS 35658 with flexuralstrength breaking load as per Annexure G of IS35658, on the prepared basecourse of specified CBR as per Table I of IRC SP 63 (2018) or else asmentioned in design and drawing with a cushion of compacted bedding sandof 25-35 mm thick (grading of the bedding sand us per clause 63.1 of IRC SP-63) and filling up the gups in between paver blocks with joint filling sand (the grading of the joint filling sand will be as per clause 6.5.2 of IRC SP 63) and completing the edges with cut blocks us per CL No. 8.7 of IRC SP- 63(2018)with proper confinement of bedding and joint filling sand, compaction.levelling and filling up of the edge gap. 80 mm thick.

Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, removing, spreading or stacking of spoils within a lead of 150 m. as directed and including trimming the sides of the trenches, leveling, dressing and ramming the bottom, and backfilling with approved material complete as per direction of the Engineer-in-Charge . In all sorts of soil excluding marshy soil & rocks (soft or hard) by manual means. upto 3 m depth With pumping out water including shoring as required.

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works. (f) 25 mm to 30 mm shuttering without staging in foundation

Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in gound floor as per relevant IS codes River bazree

Providing & fixing Concrete Sign Board as per IRC specification of size 900 x reinforced with double layer IRC febric (75 x 75 mm. mesh) and fixed with necessary nuts & bolts on two RC precast posts 100 mm. x 150 mm. of height 2.65 m. of which top 750 mm. is of section 100 x 13 mm. and 1.90 metre above GL & 0.75 metre below GL including digging hole, repacking the same with cement concrete 1:3:6 with jhama khoa or with local stone chips etc. complete including painting two coats on both faces lettering sign marks etc. as per direction of the Engineer-in-Charge. (The rate is inclusive of cost of reinforcement, concrete, shuttering, nuts & bolts, washer etc. complete.)