SPECIAL REPAIR TO SINGLE OFFICER ACCN BLDG NO P-88 OF 13 MED REGT IN THE AREA OF AGE B/R-II UNDER GE (WEST) JALANDHAR CANTT

Amount

Schedule 'A' Part-I (B/R Works)

Demolition of cement concrete (reinforced) of any description in any position not otherwise specifically provided for (below or above ground level) complete all as specified and as directed.

Material and labour for plain cement concrete 1:5:10 type E-2 (40mm graded graded stone aggregate) as in foundations, filling and mass concrete, posts and the like complete all as specified and as directed.

Material and labour for plain cement concrete 1:4:8 type D-2 (40mm graded graded stone aggregate) as in foundations, filling and mass concrete, posts and the like complete all as specified and as directed.

Material and labour for reinforced cement concrete1:2:4 type B-1 (20mm graded graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

Demolition of cement concrete (Unreinforced) of any description in ground floor and paving not exceeding 15 cm in thickness (below or above ground level) and removal surplus spoil out of defence land where directed at a level n. exc 1.5 metre above the starting point complete all as specified and as directed.

Material and labour for plain cement concrete 1:2:4 type B-1, using 20mm graded stone aggregate as in roof kerbs, mud stops, coping/benching/bed plates/plinth band lintles etc. and similar work including weathering, slightly rounded or chamfered edges and throating including necessary form work complete all as specified and as directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillars, walls and parapet walls etc complete all as specified and directed.

Material and labour for brick work with sub class 'B' bricks, straight or corvered on plan exc. 6.0m mean radius built in cement mortar 1:6 complete all as specified and as directed.

Material and labour for brick work with sub class 'B' bricks, straight or corvered on plan exc. 6.0m mean radius built in cement mortar 1:6 (but except bricks) complete all as specified and as directed.

Material and labour for sand cushioning 40 to 50mm thick for laying of interlocking tiles/paver block/ under floors including watering and well ramming with plate vibrator before and after laying of paver block/ interlocking tiles complete all as specified and directed.

Material and labour for brick work with sub class 'B' bricks, straight or curved on plan in half brick thick wall, built in cement mortar 1:4 complete all as specified and as directed.

Material and labour for 50mm thick PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in plinth protection and path finishing, joints filled with bitumen and sand mixer 50mm thick, finished the surface even and fair without using extra cement complete all as specified and as directed.

Dismantling, floor hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish outside defence land complete all as specified and as directed.

Material and labour for 25mm thick cement concrete 1:2:4 type B-1, using 25mm graded crushed stone aggregate as in levelling course, surface finished rough to receive topping floor/tiles complete all as specified and directed.

Material and labour for non-skid joint free ceramic coloured tiles, 300x300mmx7-8mm thick (Square/rectangular), as in floors etc, set and jointed in neat cement slurry and pointing in white or coloured cement to match the surface over and including 15mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and as directed.

Material and labour for non-skid joint free ceramic designer coloured tiles, 300x450mmx7-8mm thick (Square/rectangular), as in dado/skirting etc, set and jointed in neat cement slurry and pointing in white or coloured cement to match the surface over and including 15mm thick backing layer of cement mortar (1:4) complete all as specified and as directed.

Material and labour for 9 to 10 mm thick vitrified ceramic designer tiles, (square/rectangle) polished area of each tiles not exceeding 0.36 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match surface and over and including screed bed or bedding layer of cement mortar 15mm thick finished in cement sand mortar 1:6 complete all as specified and as directed.

Material and labour for 9 to 10 mm thick vitrified ceramic designer tiles, (square/rectangle) polished area of each tiles not exceeding 0.36 sqm as in vertical surface such as dado/skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match surface and over and including screed bed or bedding layer of cement mortar 15mm thick finished in cement sand mortar 1:4 complete all as specified and as directed.

Material and labour for machine cut kota stone flooring 600mmx600mm, 20-25 mm thick over 20mm thick cement screed bed in cement mortar 1:6, laid and jointed in grey cement slurry mixed with pigment to match the shade of the slab including rubbing polishing complete all as specified and as directed.

Material and labour for machine cut kota stone flooring 20-25 mm thick in riser of steps, skirting, dado and pillar laid over rendering 10mm thick in cement mortar 1:4, and jointed in grey cement slurry mixed with pigment to match the shade of the slab including rubbing polishing complete all as specified and as directed.

Material and labour for 18-20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15mm thick cement screed bed in cement mortar 1:4 complete all as specified and directed.

Material and labour for 60 mm thick, machine pressed precast conctete (white) interlocking paver block M-35 grade, any shape and size, conforming to IS 15658-2006, with grey cement and no pigment, complete all as specified and as directed.

Material and labour for chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors laid over and including 20mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointing in white cement with pigment to match complete all as specified and directed.

Taking down cement plaster of any description on brick or concrete surfaces etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed.

Material and labour for 15mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all specified and as directed.

Material and labour for 15mm thick rendering in cement mortar 1:6 on other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all specified and as directed.

Material and labour for 5mm thick rendering in cement mortar 1:3 on fair faces of brick work or concrete surfaces of ceiling finished even and smooth without using extra cement complete all specified and as directed.

Supply only integral water proofing compound @ 3% percent by weight of cement complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets of any description fixed in any position with nails complete all as specified and directed.

Supply and fixing solid PVC wall lining consisting of 5mm thick single side prelam PVC sheet instead of plain colour sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and as directed.

Supply and fixing 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and as directed.

Dismantling brick tiles or tile terracing tiles, single layer on roof including plaster complete all as specified and as directed.

Demolition of mud in roofs any thickness including plastering and leeping (whether full thickness removed or only a part thereof)

Material and labour for 40 mm thick plain cement concrete 1:2:4 type B-1 (20mm graded graded stone aggregate)as roof padding concrete to bring the existing slab in slope of 1:40 complete all as specified and as directed.

Material and labour for 10mm thick rendering in cement mortar 1:3 on on roof/sunken floors surfaces finished even and smooth without using extra cement with integral water proofing compound @ 3% percent by weight of cement complete all specified and as directed.

Material and labour for 3mm thick superior Atactic poly propylene modified polymeric membrance waterproofing treatment of weight not less than 3.6 Kg per sqm with properties of high penetration and the centre core consisting of 90 micron high Molecular-High Density polyethylene (HMHDPE) film consisting of five layers. The superior multi polyplus is to be laid after preparing the surfaces by cleaning thoroughly to achieve a smooth surface over and including a coat of bitumen primer @ 0.30 Litre per sqm over a coat of hot applied Blown Bitumen of grade 85/25 @ 1.2 kg per sqm. The overlaps between super multi polyplus are minimum 10cm seam in width/lengthwise complete all as specified and all as per manufacturer’s directions.

Material and labour for 40 mm thick brick tiles laid on cement mortar and joints grouted and pointed flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement complete all as specified and as directed.

Material and labour for 40 mm thick brick tiles laid on cement mortar and joints grouted and pointed flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement but except brick tiles. (Old serviceable brick tiles shall be re-used). Quoted rate shall be deemed to be included the cost of cleaning and washing of serviceable bricks tiles) complete all as specified and as directed.

Material and labour for cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight) complete all as specified and as directed.

Material and labour for flush pointing to brick laid flat or brick tiles in paving cement mortar in 1:3 complete all as specified and as directed.

Material and labour for repairing of RCC projections, chajjas, roofs, facia etc. in patches not exceeding 3 Sqm in each patch by necessary preparation i.e. scrapping, cutting, chiseling, derusting and cleaning exposed reinforcement, sufaces of damaged, loose RCC surfaces and applying one coat of cement slurry and filling the surfaces with cement concrete (1:1.5:3) using 12.5mm graded crushed stone aggregate and reinforced with welded mesh of weight exc 2kg per sqmtr but n.exc 3kg/sqm with or without facia and finished with cement sand mortar (1:3) using coarse sand in patches are n.exc 70mm including applying two coats of finishes to match with the existing surfaces in at any height complete all as specified. Note:- Cost of formwork and welded mesh shall be deemed to be included in unit rate quoted by the contractor complete all as specified and as directed.

Taking down chowkhat or frames with shutter not exceeding 1.5sqm each with shutters (without taking off shutters form the frames) and removing to or from store complete all as specified and as directed.

Taking down chowkhat or frames with shutter exceeding 1.5 sqm not exceeding 4.0sqm each with shutters (without taking off shutters form the frames) and removing to or from store complete all as specified and as directed.

Supply and fixing PVC solid door frame of size 100mm x45mm with wall thickness 5mm, made out of extruded 5mm thick prelam PVC sheet of density 600Kg/Cum manufactuered by an ISO-9000 certified company, mitre cut at two corners and jointed with 4Nos 150mm long brackets of 15mmx15mm MS square tube of 19 gauge throughout the frame, the door frame shall be fixed by using anchor fastne rbolts as per specification mentioned in preambles of section-8 and drawing shown in SSR Part-II (2010) and complete all as specified and as directed.

Supply and fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS square tube of 19 gauge for top and bottom rail and 40x20mm for stile. MS frame shall be covered with 5mm thick heat moulded prelam colour PVC 'C' channel of size 30x100mm forming stiles and 5mm thick prelam 125mm wide PVC sheet for top rail, lock rail and bottom rail on either side of panel and 15mm thick 20mm wide cross PVC sheet as gap insert for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail panelling of 10mm prelam PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site complete all as specified and directed.

Supply and fixing powder coated anodised aluminium door fixed on aluminium frame of section 47.62mm x 44.45mm x 1.6mm thick shutter glazed with 5mm thick tint glass (Modi guard) fixed with anodised aluminum snap beading/rubber gasket at frame so as to make it air tight with cast type aluminium anodised handle 150mm long -02Nos (One on each side of shutter) shutter with bottom rail, of size 150mmx44.45mmx1.6mm thick section, middle rail, top rail and style 83.50mmx44.45mmx 1.6mm thick section, as per IS 737-1986 and fixed with aluminium die cast (Extruded section) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters with aluminium tower bolt arrangement of standard make with locking arrangement with 6levers mortice lock of size 100mm complete all as specified and as directed.

Supply and fixing powder coated anodised aluminium window with double shutters (Both gauzed and glazed), with and aluminium grills 5mm thick and average width of aperture 50mm and mild steel GI wire cloth 0.46mm nominal dia and average width of aperture 1.18mm and fixed on aluminium frame of section 150mmx37.5mmx1.6mm thick, shutter with bottom rail, middle rail, top rail and style of size 44.45mmx47.62mmx1.6mm thick as per IS 737-1986 and glazed with 5mm thick tint glass (Modi guard) including necessary joining cleats, glazing clips, ruber neoprene packing, handles, hinges, tower bolts anodised aluminum snap beading, etc. complete all as specified and as directed.

Supply and fixing 18/19mm thick block boards, grade 1 quality, exterior grade, decorative type with decorative face veneer on one face fixed with screws to timber frame-workcomplete all as specified and as directed.

Supply and fixing 1.5mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructionsinal dia and average width of aperture 1.18mm and fixed with tinned tacks or galvanised steel staples complete all as specified and as directed.

Supply and fixing 2nd class hardwood plain fillets, square, rectangular or triangular in section, clean sawn, bull nosed, splayed, chamfered or rounded on one edge or face, clean sawn planed on both sides secured with nails or beads of section n.exc. 6Sqcm complete all as specified and as directed.

Supply and fixing extruded aluminium alloy handles, 150mm size, fabricated type, anodised complete all as specified and directed.

Supply and fixing 200mm long aluminium anodised barrel tower bolt, of extruded section, with bright bolt and fixed complete all as specified.

Supply and fixing butt hinges, 100mm long, medium weight, stainless steel with galvanised mild steel hinge plate for PVC doors complete all as specified and as directed.

Supply and fixing 100mm hasp and staple, aluminium alloy, fabricated type, anodised, including bolt to hinge plate and fixed with screws with cup board shutter complete all as specified and as directed.

Supply and fixing 40mm dia, cupboard knobs wooden polished extra finish fixed with nut, screw and washer of mild steel, bright finished complete all as specified and as directed.

Supply and fixing continuous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flaps 30mm (when open) complete all as specified and as directed.

Supply and fixing in repair 28mm dia stainless steel drappery rod cut to size and fixed in position including standard rings complete all as specified and as directed.

Supply and fixing aluminium alloy, extruded type body, door closer hydraulically regulated, designation No.1, universal type, suitable for door shutters of 700 mm in width and of weight not more than 35 kg and fixed complete all as specified and as directed.

Supply and fixing peg set of six hooks made of stainless steel complete all as specified and as directed.

Cutting chases, pinning in, making good to facing where reqd and pointing in cement mortar 1:3 to ends of edges of landing etc and cutting chases for concealed water tubing and making good cutting exc 10 cm but n.exc 20 cm girth complete all as specified and as directed.

Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

Supply, laying, jointing and testing 15mm bore galvanized iron steel tubing medium grade with all fittings such as bends, elbows, sockets, tees, reducers etc, fixed to walls, ceiling or laid in floors, including cutting through wall complete all as specified and as directed.

Supply, laying, jointing and testing 20mm bore galvanized iron steel tubing medium grade with all fittings such as bends, elbows, sockets, tees, reducers etc, fixed to walls, ceiling or laid in floors, including cutting through wall complete all as specified and as directed.

Supply and fixing in repair 15mm bore bib tap with long body chromium plated fancy type, cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed. Make : Jaguar Model No. FLR-5047N

Supply and fixing in repair 15mm bore stop valve/angle cock cast fency type (Concealed) copper alloy chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and as directed. Make : Jaguar Model No. FON-40053

Supply and fixing 20mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

Supply, hoist and fixing in position, 1000 litres capacity rotational moulded polythene water storage tank (cylindrical, vertical with closed top) ISI marked (Name of firm embossed or engraved on the body of tank) conforming to IS 12701, double layered including supply and fixing 20mm dia, 450mm long GI washout pipe (medium grade) with plug and 20mm dia, 600mm long overflow GI pipe (medium grade) with all fittings including dismantling the existing tank complete all as specified and as directed.

Supply and fixing 20mm size ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed and fixed complete all as specified and as directed.

Supply and fixing 15mm bore brass CP mixer of make Jaguar model No. CON167KNB, for mixing hot & cold water screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and as directed.

Supply and fixing 15mm bore brass CP wall mixer of make Jaguar model No. CON267KN, for mixing hot & cold water with hand shower arrangement, connecting legs , wall flanged and brackets screwed both ends for iron pipe or for union complete all as specified and as directed.

Supply and fixing vitreous china table top wash hand basin white, size 450mm x 450mmx170mm including waste pipe 32mm dia PVC, waste chain and plug and porcelain stopper, fixing of pillar tap, brass coupling 32mm bore chromium plated, restoring all connections complete all as specified and as directed. Make : Jaguar Cat part No. JDS-WHT-0545

Supply and fixing in repair vitreous china coloured wash down water closet pan (pedestal pattern), with cased cased mounted type fitting with syphonic action flushing cistern in single piece pattern with inlet ball valve float and handle including fixing bolts, plastic seat cover closed pattern with bottom and cover and mild steel chromium plated hinging device with brass chromium plated jet fwith flexible pipe of suitable length etc complete all as specified and as directed.

Supply and fixing in repair brass chromium plated tubular towel rail, 20mm dia, 'D' type, 60cm long between flanges fixed with brass chromium plated screws complete all as specified and as directed. Make : Jaguar model No. AQN7711

Supply and fixing in repair brass chromium plated towel ring, 150mm dia, fixed with brass chromium plated screws complete all as specified and as directed. Make : Jaguar model No. AQN7721

Supply and fixing in repair brass chromium plated tubular towel rack with lower hanger (Stainless steel), with hooks fixed with brass chromium plated screws complete all as specified and as directed. Make : Jaguar model No. ASH-1581H

Supply and fixing in repair brass chromium plated shower rose, size 150mm square, with or without swivel joints including fixing to steel pipe complete all as specified and as directed. Make : Jaguar model No. OHS-1805

Supply and fixing in repair brass chromium plated health faucet for EWC with 1metre long CP tubeand wall hooks superior quality complete all as specified and as directed.

Supply and fixing in repair brass chromium plated toilet paper holder fixed to wall with CP brass screws complete all as specified and as directed. Make : Jaguar model No. AKP-35751P

Supply and fixing in repair brass chromium plated soap dish fixed to wall with CP brass screws and rawl plug complete all as specified and as directed. Make : Jaguar model No. AKP-35731P

Supply and fixing in repair corner glass shelf with bracket fixed to wall with CP brass screws and rawl plug complete all as specified and as directed. Make : Jaguar model No. ACN-1173

Supply and fixing in repair glass shelf assembly consisting os 5.5 mm thick glass sheet shelf 120mm wide with CP bracket guard and railing 600mm long fixed to wall with brass screws and rawl plug complete all as specified and as directed. Make : Jaguar model No. ACN-1171N

Supply and fixing in repair PVC bath room cabinet of size 535mmx483mmx110mm with mirror fixed to wall with brass screws and rawl plug complete all as specified and as directed.

Supply and fixing in repair 450mm long PVC connection fiber reinforced, for Hot/Cold water 15mm size with PTMT nuts and washer on both ends complete all as specified and as directed.

Dismantling of 100/75mm cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required complete all as specified and as directed.

Supply and fixing 75mm sand cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors/walls complete all as specified and as directed.

Supply and fixing 100mm sand cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors/walls complete all as specified and as directed.

Supply and fixing 75mm sand cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and as directed.

Supply and fixing 100mm sand cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and as directed.

Supply and fixing 75mm sand cast iron Tee, branch pieces, double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed.

Supply and fixing 100mm sand cast iron Tee, branch pieces, double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed.

Supply and fixing cast iron floor trap with 75mm diameter of outlet, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) (20mm graded graded stone aggregate) complete all as specified and as directed.

Supply and fixing 150mm dia cast iron gully trap, setting and jointing with lead joint complete all as specified and as directed.

Supply and fixing stack clamps out of 50mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100mm dia pipe complete all as specified and as directed.

Material and labour for preparation of new plastered or unplastered surfaces of walls and applying two coats of oil bound distemper white or tinted over a coat of birla white putty complete all as specified and as directed.

Material and labour for preparation of old plastered or unplastered surfaces of walls by removal of existing treatment complete and applying two coats of oil bound distemper white or tinted over a coat of birla white putty complete all as specified and as directed.

Material and labour for prepration of surface and applying three coats of white (lime) wash on new surface of ceiling complete all as specified and as directed.

Material and labour for prepration of surface and applying two coats of white (lime) wash on old surface of ceiling complete all as specified and as directed.

Material and labour for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

Material and labour forapplying two coats of SHALIMAR SUPERCRETE / NITOBOND water proofing coating on the entire surface of sunken portion all as per manufactures instructions and as directed

Material and labour for 15mm thick cement screed in cement mortar 1:3 admixed with and including integral water proofing compound FOSROC’s complast X 412 IC @ 130ml per bag cement incl a bonding coat of FOSROC”s Nito bond AR cement slurry/Shalimar Tar Products, Mumbai No 1 liquid @ 200ml per bag complete all as specified and directed.

Schedule 'A' Part-II (Internal electrification)

Taking down carefully aluminum point wiring light /fan /light socket /power with fitting such as ceiling rose, air condition socket, Pendent, regulator, light fitting, street light etc which are not required for use and removing the material from site and making good the surfaces of walls ceiling etc all as per existing including white washing, painting all as per existing complete all as specified and as directed.

Taking down sub main wiring of two single core PVC cable PVC insulated 6/4 sqmm size cable including conduit or wooden batten and removing the material from site and making good the surfaces of walls, ceiling etc all as per existing including white washing, painting all as per existing complete all as specified and as directed.

Taking out unserviceable main switch/DB's complete all as specified and as directed.

Material and labour for concealed point wiring with 1.5 Sq.mm (nominal area) single core PVC insulated and unsheathed, FRLS cable, multi-stranded, copper conductor cable 1100 Volts grade with universal colour code (Phase & Neutral), in and including PVC concealed conduit medium grade (ISI marked) with accesories like bends, tee junction boxes etc. with sunk pressed steel terminal boxes and providing 3mm thick bakelite sheet top cover including earth wire of PVC insulated FRLS cable, copper conductor multi-stranded, 1.5 Sq.mm size in green colour, for one light /call bell/fan point controlled by one, one way switch complete all as specified and as directed.

Material and labour for concealed point wiring with 1.5 Sq.mm (nominal area) single core PVC insulated and unsheathed, FRLS cable, multi-stranded, copper conductor cable 1100 Volts grade with universal colour code (Phase & Neutral), in and including PVC concealed conduit medium grade (ISI marked) with accesories like bends, tee junction boxes etc. with sunk pressed steel terminal boxes and providing 3mm thick bakelite sheet top cover including earth wire of PVC insulated FRLS cable, copper conductor multi-stranded, 1.5 Sq.mm size in green colour, for one three pin socket outlet 5 Amps on same board with other switches complete all as specified and as directed.

Material and labour for concealed point wiring with 1.5 Sq.mm (nominal area) single core PVC insulated and unsheathed, FRLS cable, multi-stranded, copper conductor cable 1100 Volts grade with universal colour code (Phase & Neutral), in and including PVC concealed conduit medium grade (ISI marked) with accesories like bends, tee junction boxes etc. with sunk pressed steel terminal boxes and providing 3mm thick bakelite sheet top cover including earth wire of PVC insulated FRLS cable, copper conductor multi-stranded, 1.5 Sq.mm size in green colour, for one three pin socket outlet 5 Amps on independent board complete all as specified and as directed.

Material and labour for concealed point wiring with 2.5 Sq.mm (nominal area) single core PVC insulated and unsheathed, FRLS cable, multi-stranded, copper conductor cable 1100 Volts grade with universal colour code (Phase & Neutral), in and including PVC concealed conduit medium grade (ISI marked) with accesories like bends, tee junction boxes etc. with sunk pressed steel terminal boxes and providing 3mm thick bakelite sheet top cover including earth wire of PVC insulated FRLS cable, copper conductor multi-stranded, 2.5 Sq.mm size in green colour, for one six pin socket outlet 15 Amps on independent board complete all as specified and as directed.

Material and labour for concealed point wiring with 4 Sq.mm (nominal area) single core PVC insulated and unsheathed, FRLS cable, multi-stranded, copper conductor cable 1100 Volts grade with universal colour code (Phase & Neutral), in and including PVC concealed conduit medium grade (ISI marked) with accesories like bends, tee junction boxes etc. with sunk pressed steel terminal boxes and providing 3mm thick bakelite sheet top cover including earth wire of PVC insulated FRLS cable, copper conductor multi-stranded, 4 Sq.mm size in green colour, for AC on independent board complete all as specified and as directed.

Supply and fixing switch piano flush button type, 5 Amps, AC, single pole, one way, 230 Volts (ISI Marked) complete all as specified and as directed.

Supply and fixing bell, AC, 230 volts, single pole, 230/250 Volts (ISI Marked) complete all as specified and as directed.

Supply and fixing socket outlet multi purpose flush type 5 Amps, AC, 5 pin, single pole, one way, 230/250 Volts (ISI Marked) complete all as specified and as directed.

Supply and fixing switch piano flush button type, 15 Amps, AC, single pole, one way, 230 Volts (ISI Marked) complete all as specified and as directed.

Supply and fixing socket outlet multi purpose 2 in 1, 3 pin, 5 and 15 amp flush type 230/250 Volts (ISI Marked) complete all as specified and as directed.

Supply and fixing ceiling rose, surface bakelite, 65mm x 50mm having 3 terminals, PVC polycarbonate, isolated body complete all as specified and as directed.

Supply and fixing lamp holder, PVC/Polycarbonate type insulated body with back plate suitable for batten fittings complete all as specified and as directed.

Supply and fixing sheet metal enclosures for MCB's, double door, distribution board single pole and neutral 8way, 240 Volts with 200Amps rated bus bar complete all as specified and as directed.

Supply and fixing sheet metal enclosures for MCB's, double door, distribution board triple pole and neutral 4way, 415 Volts with 200Amps rated bus bar complete all as specified and as directed.

Supply and fixing MCB's, single pole, 6 to 32 Amps, 240 Volts complete all as specified and as directed.

Supply and fixing Isolator, single pole and neutral, 32 to 63 Amps, 240 Volts complete all as specified and as directed.

Supply and fixing MCCB, triple pole and neutral, 100Amps, 415Volts complete all as specified and as directed.

Supply and fixing triple pole and earth encolsure with a three pin and earth plug with socket complete with one triple pole MCB 20 Amps, 415 Volts complete all as specified and as directed.

Supply and fixing electronic fan regulator, step type, 230/250 Volts and connecting up, complete all as specified and as directed.

Supply and fixing 300mm sweep metal body heavy duty exhaust fan, AC single phase 230/240 volts with louvers/shutter with mounting brackets with suitable size of nuts, bolts, washers make opening in the wall of required size for fixing the exhaust fan and making good the disturbed wall/plastered surface and making electrical connections to ceiling rose using PVC insulated and overall sheathed flexible copper conductor of size 1.5Sqmm 3 core complete all as specified and as directed.

Supply and fixing 1200mm sweep ceiling fan, AC single phase 230/240 volts with accessories and making electrical connections to ceiling rose using PVC insulated and overall sheathed flexible copper conductor of size 1.5Sqmm 3 core and depositing the old ceiling fan in store yard of AGE E/M (West) JRC complete all as specified and as directed.

Supply and fixing LED batten light fitting (double side) 1X22Watts decorative ultra slim aluminium square profile LED light fixture retrofit with 2100 lumen output with internal surge protection device of 4KV with voltage band of 140-280V CRI 6500K (white light) with LED rod 22Watts with fixtures box type and making electrical connections to ceiling rose using PVC insulated and overall sheathed flexible copper conductor of size 0.75Sqmm 3 core complete all as specified and as directed.

Supply and fixing in replacement LED street light fitting 20Watts pressure dia cast aluminium IP66, 20watts with 2100 lumen output with internal surge protection device of 10KV, IK7 LED (SEOUL) with voltage band of 140-280V CRI 6500K (white light) with LED rod with fixtures box type and making electrical connections to ceiling rose using PVC insulated and overall sheathed flexible copper conductor of size 0.75Sqmm 3 core complete all as specified and as directed.

Supply and fixing in replacement of City 1 new decorative wall light fixture made up of polycarbonate, suitable for 15 W retrofit CFL (Spiral B-22 base) lamp type/ 1x15 W retrofit LED lamp (including CFL/ LED lamp) and making electrical connections to ceiling rose using PVC insulated and overall sheathed flexible copper conductor of size 0.75Sqmm 3 core complete all as specified and as directed. Make: Havells cat part no LHDL-02160099 or equivalent as mentioned in Appendix 'B' to particular specifications.

Material and labour for earthing complete with galvanised steel earth plate, electrode 600 x 600 x 6mm thick buried directly in ground (earth pit not less than 2.25 metre below normal ground level) with top edge of the plate not less than 1.5metres below normal ground level, connected and including GI earth lead wire 4mm dia connected to earth plate by means of nuts, bolts, check nuts and washers of galvanised iron or steel, GI earth wire protected by 15mm dia GI pipe 'light grade' upto 2 metre above ground level and connected to machinery earth plate surrounded by packed alternate layers of charcoal and common salt 15cm thick all around top and bottom and watering pipe 20mm bore GI light grade all as shown in electrical plate No 3 of SSR Part-I of 2009, testing on completion including providing PCC chamber (1:3:6) using 20mm graded stone aggregate and 50mm thick cover with RCC 1:2:4 type B-1 and 8mm dia TMT bars 100mm C/C bothway and frame including excavation earthwork and returning filling etc, complete all as specified and directed. Note :- Earth pit shall be constructed 50cm from the side of excavation to avoid sinking of pit.

Supply and fixing sub main wiring with two single core PVC insulated unsheathed, FRLS multistranded copper conductor cable of size 6 sqmm and one single core PVC insulated unsheathed, FRLS multistranded copper conductor cable green colour of size 6 Sqmm as earth lead through and including 25mm dia PVC concealed conduit with fittings complete all as specified and as directed.

Taking down XLPE insulated, armoured screened PVC bedded, galvanised steel strip or wire armored, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor complete all as specified and as directed.

Excavation in trenches not exc. 1.5 m wide and n. exc. 1.5m in depth for foundation, etc, or for shafts, wells, cesspits, manholes, pier holes etc. and getting out in soft/loose soil complete all as specified and as directed.

Returning filling in, including, spreading, leveling and well ramming in layers not exceeding 25cm complete all as specified and directed.

Removing excavated material to a distance n exc 50 metre and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Supply, fixing and laying GI tubing light grade 40 mm bore with all necessary fitting laid in trenches, under road crossing, in floors or fixed to poles/DB for cable protection etc complete all as specified and as directed.

Supply and laying XLPE insulated, armoured screened PVC bedded, galvanised steel strip or wire armored, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of cross sectional area 25Sqmm, 4core complete all as specified and as directed.

Material and labour for sand filling in trenches for cable cushioning 8cm below and 15cm above the cable and compaction complete all as specified and as directed.

Material and labour for sub class 'B' bricks laid in trenches for cable protection complete all as specified and as directed.

M/S Kuldip Construction Co.

M/S Vinod Kumar