GE/ALP (8437) KOLKATA OF 2025-26

Amount

Dismantling of 100mm cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required complete all as specified and as directed.

Dismantling of 150mm cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required complete all as specified and as directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S&F 110mm dia PVC (SWR) pipes double socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S&F 150mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S&F PVC (SWR) bends 110mm dia complete all as specified and as directed.

S&F PVC (SWR) junction single, (Single T) equal or unequal 110 mm dia complete all as specified and as directed.

S&F PVC (SWR) junction double, (Double T) equal or unequal 110 mm dia complete all as specified and as directed.

S&F PVC (SWR) cowl 110mm dia complete all as specified and as directed.

S&F PVC (SWR) bends 150mm dia complete all as specified and as directed.

S&F PVC (SWR) junction single, (Single T) equal or unequal 150 mm dia complete all as specified and as directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed.

Taking up or down 15mm bore steel water tubing and connections,including cleaning for removal to store(GI Pipe) complete all as specified and as directed.

Taking up or down 20mm bore steel water tubing and connections,including cleaning for removal to store(GI Pipe) complete all as specified and as directed.

Taking up or down 25mm bore steel water tubing and connections,including cleaning for removal to store(GI Pipe) complete all as specified and as directed.

Taking up or down 40mm or 50mm bore steel water tubing and connections,including cleaning for removal to store(GI Pipe) complete all as specified and as directed.

Taking down UPVC pipe 50 mm bore with fittings complete all as specified and directed.

S&F CPVC pipes 15 mm outer diameter of SDR 11 & plain CPVC SDR 11 fittings as in walls, ceiling, floor, etc. complete all as specified and directed.

S&L 20 mm bore (Outer dia) CPVC pipes of SDR 11and plain CPVC SDR 11 fitting fixed on wall or floor (concealed ), ceiling or laying in floors complete all as directed.

S&L in 25 mm bore (Outer dia) CPVC pipes of SDR 13.5 and plain CPVC SDR 11 fitting fixed on wall or floor, ceiling or laying in floors complete all as directed.

S&F galvanised 40mm bore steel water tubing (GI pipe), medium grade with all fittings and fixed to wall, floor and ceiling complete all as specified and as directed (upto 8 storey bldg).

S&F 50 mm bore (Outer dia) UPVC pipes of SCH-40 and plain UPVC SDR 11 fitting fixed on wall or floor, ceiling or laying in floors complete all as directed.

S&F 20 mm bore CPVC Male Brass Threaded Adaptor (MTA/ MBTA) complete all as specified and as directed.

S&F 25 mm bore CPVC Male Brass Threaded Adaptor (MTA/ MBTA) complete all as specified and as directed.

S&F 20mm bore CPVC Female Brass Threaded Adaptor (FTA/ FBTA) complete all as specified and as directed.

S&F 25mm bore CPVC Female Brass Threaded Adaptor (FTA/ FBTA) complete all as specified and as directed.

S&F 50 mm bore CPVC Male Brass Threaded Adaptor (MTA/ MBTA) complete all as specified and as directed.

S&F 50 mm bore CPVC Female Brass Threaded Adaptor (FTA/ FBTA) complete all as specified and as directed.

S&F in repairs vitreous china squatting pan of “Orissa” pattern of size 580 mmx 440mm white with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floor complete all as specified and as directed.

S&F in repairs vitreous China wash down water closet pan ( padestal pattern) incl PVC seat cover , (excluding fixing bolts, flushing cistern and flush pipe) , including connection to drain ( or outgoing pipe) and to flushing pipe , etc., complete complete all as specified.

S&F in repairs vitreous china wash hand basin, white, flat back, size 550mm x 400mm, exc chain and plug and porcelain stopper but including cutting for and pinning in ends of and including brackets, waste pipe & CP brass waste coupling of 32mm dia complete all as specified and directed.

S&F half stall Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and as directed. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)

S&F in repairs Brass chromium plated bottle traps of 32 mm bore for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and as directed.

S&F in repairs 15mm bore CP angular valve fancy type,with crutch handle, screwed for iron pipe or for brass ferrule and fixed of following size complete all as specified and directed.

S & F in repairs 15 mm Dia CP Bib taps,fancy type with crutch handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S & F in repairs 15 mm Dia CP Bib taps (Two-in-one), fancy type with crutch handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S & F in repairs 15 mm Dia CP stop cock(concealed type) , with crutch handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F in repairs 15 mm bore CP pillar taps, with capstan heads, chromium plated, Fancy type screwed down for pipe, high pressure ,complete all as specified and directed.

S & F in repairs 25 mm Dia brass gun metal gate valve , with crutch handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F in repair CP Health faucet with all necessary fittings complete all as specified and as directed. Make : Prayag/Cera/Jaquar

S&F in repair 600 mm PVC connection pipe 15 mm size with PTMT nut of following length complete all as specified and directed .

S & F in repair 100 mm floor trap fixed in floor with grating incl jointing to waste pipe fixed in cement concrete typeB-1 (1:2:4) complete all as specified and as directed.

S & F in repair 100 mm Nahani trap fixed in floor with grating incl jointing with solvent (1:2:4) cement concrete complete all as specified and as directed.

S&F in repair brass CP Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specfied and directed.

S&F in repair PVC valveless, symphonic action type low level flushing cistern white with inlet ball valve, float and handle including brackets, 10 ltr capacity complete with flush pipe(Long bend) 32mm dia of make as approved by GE complete all as specified & directed.

S&F Louvers type ventilator assembled partially with PVC exhaust fan of 200mm sweep and partially fixed with frosted glass of area n.exc 0.5 sqm including all necessary fittings complete all as specified and directed.

Demolition of brickwork or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins,arches, pillars,etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Demolition of reinforced Concrete of any description and in any position not otherwise specifically provided for reinforcement cut as required to facilitate demolition complete all as specified and as directed.

M&L for Reinforced cement concrete (nominal mix) Type B1 (1:2:4) (20mm graded stone aggregate) in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers,lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified and as directed.

M&L for TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

All as per item No. 52 here in before but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed.

M&L for brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick walling built in cement mortar (1:4) complete all as specified and directed.

Taking down cement plaster on brick or stone wall surfaces including glazed tiles wherever exists including raking out joints, hacking for key and scrubbing down with water complete all as specified and as directed.

M&L for 5mm thick plastering on ceiling surfaces in CM (1:3) surface finished even and fair complete all as specified and directed.

M&L for 20mm thick (in two layer) plastering on fair face of Brick surface with CM (1:4) mixed with WPC finish surface even and smooth with out using extra cement complete all as specified and directed.

M&L for 15mm thick cement plaster with CM (1:6) on other than fare face of brick wall finsh even and smooth without using extra cement complete all as directed.

Taking down chowkhats or frame with shutter (without taking off shutters from the frame) exc 1.5 sqm n.exe 4 sqm each complete all as specified and as directed.

Taking down rusted steel windows/ventilator of any description and size including shutters complete all as specified and as directed.

S&F for Factory made single extruded WPC(Wood polymer composite) solid door Frames of size 45 x 70mm comprising of virgin PVC polymer of K value 58-60(Suspension grade), calcium carbonate & natural fibres and non-toxic additives fabricated with mitre joints after applying PVC solvent cement and screwd with full body threaded star headed SS screws having minimum frame density of 750 Kg/cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), mimimum compressive strength of 58 N/Sqmm and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof & fire retardant & fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as directed.

S & F S&F for Factory made single extruded WPC(Wood polymer composite) solid flush door shutter of 30mm size comprising of virgin PVC polymer of K value 58-60(Suspension grade), calcium carbonate & natural fibres and non-toxic additives fabricated with mitre joints after applying PVC solvent cement and screwd with full body threaded star headed SS screws having minimum density of 650 Kg/cum, screw withdrawal strength of 1800 N(Face) & 900 N (Edge), mimimum compressive strength of 50 N/Sqmm, modulas of elasticity 850 N/sqmm & resistance to spread of flame of class A category with property of termite/borer proof , water/moisture proof & fire retardant & fixing with SS butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, all as per dirns of EIC.

S&F 12 mm thick prelaminated particle boards (ISI marked), interior grade prelaminated both side with decorative choice lamination, fixed with necessary clips and other like to aluminium frame work, as in doors, windows, partition etc complete all as specified and as directed.

S&F Stainless steel handles 150mm long, bright polished complete all as specified and as directed.

S&F Stainless steel handles 100mm long, bright polished complete all as specified and as directed.

S&F 300mm long sliding door bolts with hasp stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bots and sliding bolts of extruded or cast aluminium alloy complete all as specified and as directed.

S&F 150mm long sliding door bolts with hasp stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bots and sliding bolts of extruded or cast aluminium alloy complete all as specified and as directed.

S&F Aluminium anodised barrel tower bolts of extruded section with 200 mm long bolt, complete all as specified and as directed.

S&FAluminium anodised barrel tower bolts of extruded section with 150 mm long bolt, complete all as specified and as directed.

S&F Bearing hinges 100mm, cast brass, with Stainless steel hinge pin, bright polished and fixed, typeB-11 complete all as specified and as directed.

S&F for Stainless steel wire cloth having 0.36 mm nominal dia of wire and average width of appreature 1.40 mm and fixed with stainless wire staples complete all as specified and as directed.

S&F in repair aluminium (extruded section) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed.

S&F floor door stopper overall length of cover plate 150mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed.

Dismantling floor , hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L Anti-skid joint free ceramic (coloured) tiles (7-8)mm thick area of each tiles exeeding 0.06sqm but n.exceeding 0.11 sqm in toilet/bath floor etc.set and jointed with epoxy with spacers complete all as specified & as directed. Note: Screed bed of adhesive shall be measured and paid separately.

M &L for Anti-skid joint free ceramic coloured tiles area of each tiles (Square / rectangular) exc 0.11 sqm but n. exc 0.18 sqm 7 to 8 mm thick in floor etc set and jointed with epoxy with spacers complete all as specified and as directed. Note: Screed bed shall be measured and paid separately

M&L for glazed ceramic (coloured) tiles of size (450x300x6-7)mm thick as in vertical surface/dado set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for screed bed or bedding layer of adhasive (8-10) mm thick for laying floor finishes complete all as specified and as directed.

M&L for bedding layer of mortar 10 mm thick in CM (1:3) for laying wall/dado finishes complete all as specified and as directed.

Demolition of cement concrete above ground floor n.exe 15cm thickness(below or above ground level) complete all as specified and as directed.

M&L for 25mm thick cement concrete type B-0, (1:2:4) using 12.5mm graded stone aggregate complete all as specified and as directed.

Supply and applying two coats of High performance elastomeric cementitious waterproof coating sandwiched with 45 GSM glass fibre reinforcement on the entire floor and 1.0 m of all walls of all toilets as per following methodology:- Cleaning of exposed concrete surface by mechanical means or by hydro blasting to remove laitance, loose particles, contamination etc. which may hinder bonding. Coving of RCC joints with PCC (1:1.5:3) mixed with Integral Water Proofing compound. Applying one coat of Waterproofing membrane to concrete surfaces followed by application of 45GSM glass fibre on the wet surface. Applying second coat of waterproofing membrane at the right angles to the direction of first coat. Second coat shall be applied after the first coat gets dry. Sprinkling fine aggregate immediately after the application of second coat to get the mechanical key for protective plaster. Curing to Water proofing membrane to be carried out for minimum period of 3 days with ponding complete. The Water Proofing Product Should have Mixed density: 1.68g/cc (brushable consistency). Adhesion to concrete : >1N/mm2. Static crack accommodation: 1mm.( Fosroc/Elantas beck/Kunal conchem) Make : SIKA/FOSROC/Hindcon

Bore packing of all the Spouts to be done with grouting admixture mixes with Cement Concrete / Mortar @225 ml per bag of Cement complete all as specified and as directed.

Dismantling of old unserviceable water tank, removing from site, Supply and fixing of rotational moulded polythene water storage tank 1000 litre capacity ISI marked (cylindrical, vertical, double layered with closed top) hoisted and fixed in position including PVC float valve 20mm bore weight not less than 210gms. complete all as specified and as directed.

Dismantling of old unserviceable water tank, removing from site, Supply and fixing 2000 Litre capacity rotational moulded polyethylene water storage tanks (multilayer.cylindrical vertical with closed top) with and including 50 mm dia PVC float valve hoisted and fixed in position complete all as specified and as directed.

S & F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

Complete removal of existing treatment by using electric sander machine or steel wire brushing to remove all dust and loose scale etc of wall surfaces & prepare to receive wall care putty complete all as specified & directed.

M&L for 1mm thick wall care putty on wall including rubbing with sand paper to achieve a smooth surface & sharp straight edges etc. complete all as specified & as directed.

M&L for preparation old decorated walls & applying two coats of acrylic oil emulsion distemper complete all as specified and directed.

M&L for preparation of decorated Ceiling & applying two coats of acrylic oil emulsion distemper complete all as specified and directed.

M&L for preparation of newly plastered wall surface two coats of oil bound distemper over a coat of primer on complete all as specified and directed.

M&L for preparation of newly plastered ceiling surface & applying three coats of white wash complete all as specified and directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over 2mm thick wall care putty and icluding priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed.

M&L for preparing of new steel surfaces & applying two coats of synthetic enamelled paint over a coat of red oxide primer complete all as specified and as directed.

M&L two Coats of Synthetic Enamel Paint over one coat of primer to steel and iron surfaces of any description, not otherwise described including preparation of new or previously untreated surface complete all as specified and directed.

M&L for one coats of synthetic enamel paint, area exc.10cm width or girth over Old painted wooden surfaces including preparation of surface complete in all respect as specified and directed.

Providing, cement concrete type B0 (1:2:4) 12.5 mm graded aggregate as in hold fast block kerbs or mud stops, rounded or chamfered etc comlete all as specified and directed.

Supply only Intregal water proofing compound complete all as specified and as directed.

M&L for Granite (of any type) tiles 16 mm to 18 mm thick (table rubbed and polished) in floors, window cills, cooking platforms, and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and polishing complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 20 mm thick in CM (1:6) for laying floor finishes complete all as specified and as directed.

M & L Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 sqm but n.exc .36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in white or coloured cement to match complete all as specified and as directed. (Note:- Backing coat/Screed bed shall be measured and paid Seperately under respective items of Sch A')

M&L 15mm thick cement slurry bedding layer on floor finishes in CM (1:4) complete all as specified and as directed.

S&F Anodised powder coated aluminium (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators etc with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

S&F Anodised powder coated aluminium (minimum thickness of powder coating 50 micron) window and ventilator shutters, sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

S&F Hinges 125 mm, cast brass, with mild steel hinge pin, bright polished and fixed medium wheight , complete all as specified and directed.

S&F 125 mm long Aluminium handles, cast type, anodised complete in all respect as specified and directed.

S&F 20 mm bore brass elbow/Tee/MTa /Fta CPVC complete all as specified and as directed.

S & F in repair 110/125 mm floor trap fixed in floor with grating incl jointing with solvent (1:2:4) cement concrete,complete all as specified and as directed.

M&L for preparation of old plastered ceiling surface & applying one coat of white wash complete all as specified and directed.

M/L for Point wiring for one 15 Amps socket point controlled by one switch 15 amp on independent board with 4.0 sqmm single core PVC insulated and PVC unsheathed FRLSH multistranded copper conductor cable 1100 volt grade enclosed in and including suitable size of PVC couduit with accessories fixed on surface on walls/ceiling by means of PVC sleeves, dash fastners and cadmium plated screws including sunken junction box not less than 1.2 mm thick concealed in wall, mounting accessories like switches, sockets etc. with 3.0 mm thick Laminated sheet top covers etc including 4.0 Sqmm single core multi stranded copper conductor PVC insulated and unsheathed cable as earth continuity conductor to common earth dolly.

M & L for switch socket combination 5 pin 5/15 Amps, 240 V Flush type complete all as specified and as directed. Make - Anchor or equivalent make as approved by GE.

Sub main wiring with two single core PVC insulated unsheated FRLS flexible copper conducted cable of size 4.0 Sqmm and one single core PVC indulated unsheathed FRLS flexible copper conductor cable of size 2.5 sqmm as earth lead in and including suitable size of PVC couduit with accessories fixed on surface on walls/ceiling by means of PVC sleeves, dash fastners etc making good distrubed surface complete all as specified and directed. (Note : Two runs of 4.0 Sqmm cable, one run of 2.5 sqmm earth wire and PVC conduit all one RM lenght each shall be measured as one unit of one RM).

M & L GI water tubing , medium grade, with all fittings such as sockets, bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc, bore of pipe 15mm, complete all as specified and as directed.

S & F PVC Bib taps with PVC flanged suitable for connection of hot water supply from 15mm dia, complete all as specified & directed.

Supply and fix water heater storage vertical type cap 25 Ltrs electrical operated 240 V single phase including hot & coled water pipe with making grouting to the wall for fixing nuts, bolts and washer complete with making connection to main incoming (cold pipe) and outgoing (Hot) pipe complete all as specified and as directed. Make : Bajaj (Model No Crest, SKU Code 150977) or equivalent in Cromton Greaves/Havells.

Supply and fix water heater storage horizontal type cap 25 Ltrs electrical operated 240 V single phase including hot & coled water pipe with making grouting to the wall for fixing nuts, bolts and washer complete with making connection to main incoming (cold pipe) and outgoing (Hot) pipe complete all as specified and as directed. Make : Bajaj (Model No MAJESTY SORIZONTAL, SKU Code 150692) or equivalent in Cromton Greaves/Havells.

Supply and fix water heater storage square type cap 25 Ltrs electrical operated 240 V single phase including hot & coled water pipe with making grouting to the wall for fixing nuts, bolts and washer complete with making connection to main incoming (cold pipe) and outgoing (Hot) pipe complete all as specified and as directed. Make : Bajaj (Model No Maestro, SKU Code 150899) or equivalent in Cromton Greaves/Havells.

Supply, Installation, Jointing, Testing and Commissioning in repair of following Medical grade Copper Pipe line with suitable fiittings. .Copper pipe shalll be solid drawn,seamless,deoxidized,non arsenical,half hard,tempered and degreased material conforming to BS:EN:13348:2001+A1:2005. Fittings would be made of copper and suitable for a steam of working pressure of 17 bar and conforming to BS:864 with specially made for brazed socket type connection.Complete all as specified and as directed. (Certified 18-04-57). Make- Metal Alloys/Max flow or equivalent make as approved by GE.

54mm OD X 1.2mm wall thickness

42mm OD X 1.2mm wall thickness

28mm OD X 0.9mm wall thickness

22mm OD X 1.2mm wall thickness

22mm OD X 0.9mm wall thickness

15mm OD X 0.9mm wall thickness

12mm OD X 0.7mm wall thickness

Supply, installation, testing and commissioning in repair of Gas outlet points/terminal units with matching probes for Oxygen, Nitrous Oxide, Medical Air 4 Bar/7 Bar, CO2, front loading type, BS type. Complete all as specified and as directed of following-

Oxygen Port.

Vacuum Port.

Supply and fixing LINE ISOLATION VALVES Complete all as specified and as directed for following sizes of valves :- Make- Matrix/Hospitech service and sales/ Zoloto/ RN/ JSI

15 mm valve

22 mm valve

28 mm valve

42 mm valve

54 mm valve

12 mm valve

S &F pork let outlet valve for oxygen/nitrous/Vacuum as per sample complete all as specified and as directed.

S &F adaptor pork let for oxygen /Nitrous/vaccum as per sample complete all as specified and as directed.

S &F Air outlet valve (BS) Type for vacuum as per sample complete all as specified and as directed.

S &F Adapter outlet valve (BS) Type for Air as per sample complete all as specified and as directed.

S &F LP tubing for Vacuum unit (black) as per sample Complete all as specified and as directed.

S &F LP tubing for BPC flow meter (white) as per sample Complete all as specified and as directed.

S &F humidyfire bottle including BPC flow meter for oxygen complete as per sample complete all as specified and as directed.

S &F ward vaccum unit including regulator, gauge for showing negative pressure and 600ml receiver jar complete as per sample complete all as specified and as directed.

S &F Oxygen BPC flow meter with Humidifier bottle for bed head panels Complete all as specified and as directed.

S &F Ward vacuum unit with 600 ML receiving jar for bed head panels Complete all as specified and as directed.

S &Freceiver Jar for ward vaccum unit 0 - 600 ml complete as per sample complete all as specified and as directed.

S &F gasket for BPC jar as per sample Complete all as specified and as directed.

S &F gasket for vacuum jar as per sample Complete all as specified and as directed.

S &FHP tubing for oxy/nit/vac as per sample Complete all as specified and as directed.

S &F saddle for copper tubing 12 mm dia as per sample Complete all as specified and as directed.

S &Fsaddle for copper tubing 15 mm dia as per sample Complete all as specified and as directed.

S &F saddle for copper tubing 22 mm dia as per sample Complete all as specified and as directed.

S &F saddle for copper tubing 28 mm dia as per sample Complete all as specified and as directed.

M&L for one coat of synthetic paint to med gas pipe line for oxygen, Nitrious & vaccum with proper colour coading (for oxygen- white colour, for Nitrious- Blue colour & for Vaccum- Yellow colour) after cleaning/scrapping of old paint all as specified and as directed.

Cutting the gas/vaccum pipe line for supply, insertion of suitable size of tee for pipe of dia 22/15 mm for new point as required all as specified and directed including with all necessary arrangement like soldering/welding etc complete all as specified and as directed.

Cutting the gas/vaccum pipe line for supply, insertion of suitable size of tee for pipe of dia 42/28 mm for new point as required all as specified and directed including with all necessary arrangement like soldering/welding etc complete all as specified and as directed.

Supply , fixing & testing of double scrub station for OT madeb of stainless steel (grade ss 304 )having minimum thickness 1.2 mm with digital controler including infrared senser for each tap of size 44" (inch) x(42" (inch) x34" (inch) should have provision of following items including all connections and testing after installation all as per specified and directed. MAKE : finish type -matte modal no - SS1BAY front panel - removable with key operation -foot pedal

SUDHA ENTERPRISES (BID ID -3313669)

M A ENTERPRISES (BID ID -3313764)