Karnataka

Active

Works

Buildings

Renovation of (6 blocks ,12Nos) PE type quarters at Bheemarayanagudi camp for the year 2026-27 camp for the year 2026-27

Krishna Bhagya Jala Nigam Limited

KBJNL Division JBC Division No 2 Bheemarayanagudi | Yadgir, Karnataka

Amount: ₹84.6 LCloses: 17 Sept 2026

Timeline

Published8 Sept 2026
Closes17 Sept 2026
Bid Opening19 Sept 2026

Tender Value

₹84.6 L

EMD Value

₹85,000

Closing Date

17 Sept 2026, 5:30 pm

Tender Inviting Authority

Office Inviting Bids

Krishna Bhagya Jala Nigam Limited

Contact Person

Sri. GURUNATH

Mobile Number

Work Description

Renovation of (6 blocks ,12Nos) PE type quarters at Bheemarayanagudi camp for the year 2026-27 camp for the year 2026-27

Tender Information

Tender ID

KBJNL/2026-27/BD/WORK_INDENT3731

Reference Number

KBJNL/2026-27/BD/WORK_INDENT3731

Tender Type

Reserved

Product Category

Buildings

Form of Contract

Two Tender Document System(Two Cover)

Location

KBJNL Division JBC Division No 2 Bheemarayanagudi

Source Website

Subscribe to view

Documents Required

11 documents required · 11 mandatory

Technical Bid

RequiredAnnual Turnover Certificate

RequiredA valid copy of KPWD class-3 & above registration certificate.

RequiredValid GST registration certificate.

RequiredLine of credit issued by Schedule bank for this work

RequiredValid EPF registration certificate.

Requiredwork done Certificate issued by EE Counter signed by concerned SE

RequiredFor Quantities work done certificate issued by EE and countersigned by respective SE

Requiredthe requisite EMD in cash

Requiredtender capacity

Requiredcopy of valid Caste Certificate Issued from competetent Authority

RequiredA valid domicile certificate

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

SC Category Contractors should upload a scanned copy of valid Caste Certificate Issued from competetent Authority and should submit the hard copy of original SC Caste certificate for verification, at the time opening of cover-I. SC Category Contractors should be Domicile of State of Karnataka for more than 10 years and should upload a copy of valid Domicile certificate issued by competent Authority and should submit the hard copy of Original Domicile certificate for verification, at the time opening of cover-I.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

During technical evaluation, if the employer finds that any certificates/information furnished is false, such bidders will be disqualified and barred from participation in the bid.

The intending bidders are advised to visit the site of work, make themselves familiar with local situation about the availability of construction materials, work men, land required for construction activities, etc before submission of bids.

Incomplete tender documents will be rejected.

All materials like steel, cement etc., required for the above work should be procured by the contractor only. No departmental supply of any material shall be made by KBJNL.

The contractors/firm shall send the authorization letter for their representatives duly attesting their signature

The contractor should adhere to the time period specified for completion of work, under any circumstances without linking to the pending payment of the work & also Land acquisition problems if any.

Typographical errors, if any will not be the ground for any claims by the Contractor.

The Bidder shall be responsible for successful performance of the contract

The contractor/authorized signatory should attach his/her scanned signature to the Schedule-B before uploading and also submitting their tenders.

If any of the dates mentioned above happened to be a general holiday, the net working day holds good.

Further information can be had from the undersigned during office hours in the office of the Executive Engineer,KBJNL, JBC Division No.2, Bheemarayanagudi, Shahapur taluka, DistYadagiri and also through e mail id eejbc2atgmail.com.

Conditional tenders are liable to be rejected. The officer competent to accept the tender shall have the right to reject any or all the tenders without assigning any reason whatsoever.

Corrigendum will be published in the web site kppp portal for all modifications / corrections if any.

The intending bidders should note that, if any of land either part/parts or in whole required for the work is not acquired by the Nigam, it shall be the responsibility of the bidder to take possession of such land and start the work by obtaining consent by the land owners before commencement of work, at no extra cost to Nigam and no claim/delays whatsoever relating on account of non-availability of land would be entertained

The quoted premium shall include all taxes, fresh Levies and Duties by Central/State/Local authorities. Deductions will be made as per the norms and statutory order of Government, at the time of making payment

Contractor should abide by the directions of Government towards recovery of 1%(or as modified by the Government from time to time) Cess from the contractors bill under the provisions of building and other constructions worker welfare cess Act 1996.

Notwithstanding anything contained elsewhere, all conditions of the tender shall be interpreted strictly as per the Tender Notification and the Bid Document. The bidder shall be solely responsible for referring to and complying with all clauses, schedules, and instructions contained therein. The Evaluation Authority shall bear no responsibility for any error, misinterpretation, or omission on the part of the bidder while submitting the bid or supporting documents

Technical Criteria

General

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing works

List of works for which tenders already submitted

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

List of Financial Resources with Certificates

Past Experience

The intending bidder should have satisfactorily completed as prime contractor, at least one similar work of value not less than 25% of the amount put to tender during last five financial years (i.e. from 2021-22 to 2025-26) reckoned back from 2026-27. The certificate should be issued by an officer not below the rank of Executive Engineer of the concerned Division / Equivalent officer and countersigned by the Superintending Engineer of the concerned Circle / next higher officer. The cost will be updated to the present value by giving a weightage of 10% each year, if the work is completed prior to the year 2026-27. Note: Similar work means: Similar work means: Work consists of Any Construction, - Rs 21.15 Lakhs (25% of the cost of the work).

Work Done Certificate

The intending bidder should have executed a minimum quantity (50% of peak annual rate of construction) of following items of work in any one financial year during the last five financial years reckoned back from 2026-27. (i.e. from 2021-22 to 2025-26) Certificate should be obtained from an officer not below the rank of Executive Engineer of the concerned Division and countersigned by the Superintending Engineer of the concerned Circle. As listed in the below table. (Cement Concrete work including PCC & RCC - 101.74 cum, Plastering - 1429.00sqm, Reinforcement Steel work-6.49 tonne &Tiles work-210.46Cum (50% of peak rate of construction)

Work Done Certificate

Capabilities of Vendor

Liquid assets and /or availability of credit facilities of no less than Rs. 25.40Lakhs (Credit lines/ letter of credit/ certificates from banks for meeting the fund requirement etc. (usually 30% of the amount of contract)

Line of Credit

Tenders who fulfil the above specified minimum qualification criteria, will only be qualified, if their available tender capacity is more than the total tender value. Then available tender capacity will be calculated as under. Assessed available tender capacity (AXNX5.00 -B)

Others -- Bid capacity

Financial Status

Achieved in at least ONE financial years a minimum financial turnover (in all classes of civil Engineering construction works only) of Rs 84.67 Lakhs. (The Turnover certificate should be issued & certified by a practicing Chartered Accountant along with UDIN number)

Audited CA Certificate of Annual Turnover

Others

A valid copy of KPWD registration certificate

PWD Registration Certificate (Class I/II/III/IV)

Valid EPF registration certificate with latest paid challan.

Valid EPF Certificate

Valid GST registration certificate.

GST Registration

Fee & Financial Details

Tender Fee Amount

₹2,120

EMD Fee Amount

₹85,000

Important Dates

Last Activity

8 Sept 2026

Published

8 Sept 2026

Bid Opening

19 Sept 2026

Download Ends

15 Sept 2026

BOQ Preview

•

Renovation of (6 blocks ,12Nos) PE type quarters at B Gudi camp for the year 2026-27

•

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge wi...

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

•

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

•

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand with all lead and lifts etc ,Complete as per specifiction, and as directed by Engin...

•

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...

•

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground to the appropriate disposal area as per direction of Engi...

•

Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includ...

•

Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing s...

•

Dismantling tile work in floors and roofs laid in cement mortar including stacking material to the appropriate disposal area as per direction of Engineer-in-charge. For thickness of tiles above 25 mm...

•

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

•

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in al...

•

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...

•

Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Pr...

•

Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long bracket...

•

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...

•

Providing and fixing in position Mathi / Nandi wood fully panelled shutters or windows with stiles and rails of 25mm. thick, 75mm wide in two halves with panels of 20mm thick including cost of materi...

•

Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side c...

•

Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per s...

•

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after th...

•

Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, di...

•

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...

•

Providing and laying Ceramic glazed floor tiles of size 300x300 mm thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivo...

•

Providing and fixing Towel rail (Circular) made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class a Economy with all lead and lifts etc ,Complete a...

•

Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. complete as per direction of Engineer in- charge: Anodized (AC 15 ) luminium including cost of materials, labo...

•

Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc 125x65x2.12mm with all lead and lifts etc ,Complete as per specifiction, and as directed by Engineer ...

•

Providing and fixing aluminium tower bolts, ISI marked, anodised (an odic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws et...

•

Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity ounters, window sills, facias and s...

•

Extra for fixing granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete.with all lead and lif...

•

Providing and fixing PTMT bib cock of approved quality and colour.20 mm nominal bore, 89 mm long, weighing not less than 88 g with all lead and lifts etc ,Complete as per specifiction, and as directed...

•

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making go...

•

Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...

•

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with pai...

•

Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operation...

•

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

•

Constructing brick masonry chamber of internal dimension 450x300mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

•

Providing and laying Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fitting this includes jointing of pi...

•

Concealed Conduit system: Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and runn...

•

Supplying heavy gauge PVC conduit pipe ....... dia ....... mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of...

•

Wiring for lighting/powe rcircuit using one of FRLS PVC insulated 1100V grade,multi strand copper wire with low conductor resistance single core In open or concealed system of wiring with specified IS...

•

Point wiring using copper wire with switch Supplying and wiring adopting loop system in existing PVC conduit/casing caping using copper PVC insulated multi strand 2x1.5 sqmm copper wire with a 6Amps f...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6 Amp one way switch ,with all lead and lifts etc ,Complete as per specifict...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 400 watts dimmer,with all lead and lifts etc ,Complete as per specifiction, ...

•

Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. 6 Amp 3way 5 pin socket ,with all lead and lifts etc ,Complete as per specifiction, and as directed by Engi...

•

Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. 6A ceiling rose ,with all lead and lifts etc ,Complete as per specifiction, and as directed by Engineer in...

•

Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board., 6 amps Lamp Holder ,with all lead and lifts etc ,Complete as per specifiction, and as directed by Engineer ...

•

Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board., 16 Amps 3 way 5 pin socket ,with all lead and lifts etc ,Complete as per specifiction, and as directed by ...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6/16A Universal Socket ,with all lead and lifts etc ,Complete as per specific...

•

Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/N...

•

Supplying and fixing of Modular MCB Devices (Tripper) With Breaking capacity of 6kA. 16 - 32 A Sp ,with all lead and lifts etc ,Complete as per specifiction, and as directed by Engineer in charge

•

Earthing: Supplying and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of sa...

•

Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phas...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

KW3- 3731.doc

Tender Document • 0.37 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .