SPECIAL REPAIR TO ROOF OF BLDG NO T-33 AND T-34 AT WARDHA DIVISION IN RA AT CAD PULGAON

Amount

Dismantling of Asbestos cement (corrugated, semi corrugated etc) sheets in roof covering complete all as specified and as directed.

S & F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S & F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Dismantling of timber scantling 40 Sqcm and over in section, in any position as in Unframed work complete all as specified and as directed.

S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410 -W (GdeE- 250) qualityA complete all as specified and as directed.

Supply & Fixing Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

M&L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregates) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directe incuding necessary formwork required complete all as specified and as directed.

M&L for preparing new or previously untreated surfaces, of steel and iron work of any description not otherwise described exc 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L for Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with cresote oil all as specified and as directed.

Dismantling ceiling boards/insulation boards as in ceiling of any description or size including cover fillets complete all as specified and as directed

M&L 8 mm thick designer ceiling board (Make : Everest or equivalent as approved by GE) in ceiling fixed with screw as per manufactures instructions, fixed with white powder coated galvanized iron grid with 24mm wide T-section exposed flanges comprising of main runner made from 0.33mm thick galvanized steel sheet & of size T 24x32mm and spaced at 1.2m c/c securely fixed to the structural soffits by hangers at 1.2m of GI wire 4mm dia fixed pipe or wall plug, level adjusters and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall flush fitting of 1200mm long cross tee with (double stitching) to be inter locked between main runners at 600mm c/c to form 600x600mm modules, angle along perimeter wall shall be of 0.45mm thick galvanized steel of size 19x19mm of white colour all as per instruction complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters) of any description exc 1.50 Sqm but n.exc 4 Sqm each complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters) of any description n.exc 1.50 Sqm each complete all as specified and as directed.

Taking down Shutters of any description n exc 1 sq. m each complete all as specified and as directed.

Taking down Shutters of any description exc 1 sq. m but n.exc 2 sq.m each complete all as specified and as directed.

S& F Solid PVC Double door frame of size 50mm x 95mm made out of 5mm Plain colour PVC sheet reinforced with M.S. tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.

S&F Soild PVC door frame of size 50mm x 47mm made out of 5 mm plain coloured PVC sheet, reinforced with MS square tube supplying and fixing in opening as per specification and drawing.

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing completed all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing but fully glazed i.e. glass panes used instead of 5mm Single Side Prelam PVC sheet panels completed all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing but wire gauzed i.e. panel will be of wire gauze in lieu of PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly complete all as specified and as directed.

S & F of 3 mm thick plain sheet glass, ordinary quality and glazing with oil putty or fixed with beads in square not exc. 0.5 Sqm in each pane complete all as specified and as directed.

S & F of Stainless steel wire cloth, 0.36mm normal dia of wire and avg. width of aperture 1.40 mm and fixed with stinless steel wire staples complete all as specified and as directed.

Supply & Fixing 100mm long cold rolled, mild steel butt hinges medium weight complete all as specified and as directed.

Supply & Fixing 75mm long cold rolled, mild steel butt hinges medium weight complete all as specified and as directed .

Supply & Fixing 150mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and as directed.

Supply & Fixing 100mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and as directed.

Supply & Fixing 100 mm long extruded aluminium alloy handle fabricated type anodised complete all as specified and as directed.

Supply & Fixing 150 mm long extruded aluminium alloy handle fabricated type anodised complete all as specified and as directed.

S& F in repairs Aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) 300 mm long and fixing clips of sheet cast or extruded sections and fixing bolt or cast aluminium alloy& fixed complete all as specified and as directed.

Taking down cement plaster/terrazzo finish on wall of any description hacking for key scrubbing down with water including racking out joints.

M & L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and fair without using extra cement.

M&L for preparing surface of wall priming plastered and other surfaces and applying two coat of oil bound distemper over a coat of alkali resistant primer complete all as specified and as directed.

M&L for preparing surface of wall priming plastered and other surfaces and applying two coat of cement base paint over a coat of white cement primer complete all as specified and as directed.

M&L for complete removal of existing treatment on old surfaces on walls and applying two coats of distempering on walls with distemper oil emulsion over a Chalk whiting as a primer complete all as specified and as directed.

M & L for complete removal of existing treatment on old surfaces on walls two cement base paint over a coat of white cement as a primer including preparation of old surfaces complete all as specified and as directed.

Taking down carefully concealed/ casing caping/ PVC Conduit point wiring copper / aluminium (light / fan / scoket) complete (with fittings such as switches ceiling rose, pendents, regulators sockets etc) and making good disturbed surface with exisitng specification complete all as specified and as directed.

M&L point wiring complete with 1.5 Sqmm single core sheathed PVC insulated FRLSH cable 1100 V grade multistranded copper conductor of different code of ISI marked drawn through and incl PVC casing caping of suitable size with accessories ISI marked incl PVC insulated copper cable for earth of same type and sized connected to earth dolly including provision of PVC box of suitable size for mounting switches / sockets and fan regulators etc complete all as specified and directed for the following:- Note : Point wiring will be done with existing old MCB DB

One light point controlled by one switch one way

One ceiling fan / exhaust fan / wall mounting fan point controlled by one switch one way

One socket outlet three pin 5/6 Amps controlled by one switch on the same board.

One switch socket outlet three pin 5 /6 Amps controlled by one switch on independent board.

M&L for point wiring with stranded copper conductor 2.5 Sqmm (nominal area), single core, multistranded, FRLSH , PVC insulated and sheathed cabel 1100 volts grade, ISI marked drawn in and incl PVC casing caping of suitable size with accessories ISI marked incl PVC insulated copper cable for earth of same type and sized connected to earth dolly including provision of PVC box of suitable size for mounting complete all as specified and as directed.

M&L switch piano flush type single pole,one way, 5 Amps, 240 V complete all as specified and directed including taking down old U/S one. Make : Anchor/Havells/Cona

S&F socket outlet 5/6 pin type,5 Amps, 240 V complete all as specified and directed including taking down old U/S one . Make : Anchor/Havells/cona

Supply & fix switch socket combination flush type 2 and 3 pin, 5 Amps, 250 volts, AC, multipurpose all as specified and as directed Make : Anchor/Havells/cona

S&F switch socket combination flush type (multipurpose type) but 15A/16A, 5 in 1 15 Amps, 240V complete all as specified and directed including taking down old U/S one. Make : Anchor/Havells/cona.

S&F ceiling rose surface type with 3 terminals complete including taking down old U/S one Make : Havells/Anchor/Cona

S&F fan regulator electronic step type AC 240 Volts,50 Hz complete including taking down old U/S one . Make : Anchor/Cona/Havells

S&F lamp holder,PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed including taking down old U/S one. Make : Anchor/Cona/Havells

S&F LED tube light lamp 1 x 18/20 watt retrofit including suitable size of batten complete (01 set) (single / double side connection) all as specified and directed including taking down U/S old any type of TL fitting. Make Havells /Philips/Bajaj .

Taking down carefully sub main wiring including batten/ conduit by unscrewing from wall, ceiling and making good surfaces to match with original status as specified and directed.

M&L for sub main wiring alongwith earth wire 2 run of 4 sqmm PVC FRLS copper cable and 1run of 4 sqmm PVC FRLS copper cable for earth wire of FR PVC insulated copper conductor, single core cable in PVC Casing caping 20mm complete all as sfecified and directed Note for sub main wiring :- 2 runs of wire and 1 run of earth wire will be measured as one unit i.e RM 2. Groove Cutting ,pinning and plastering of disturbed surface etc shall deemed to be included in the quoted rate.wiring 2 run of wire and1 run of earth wire

Material and Labour for earthing complete in replacement of old with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground vertically to a depth not less than 2.25m below ground level with top edge of earth plate not less than 1.5m below ground level connected to galvanized iron earth lead wire 4.00mm dia by means of bolts, nuts, check nuts, washers of galvanized iron and connected to main switch/control board upto 7.5m away from the earth electrode including excavation earth work, PCC 1:3:6 type C1 chamber, RCC 1:2:4 type B1 40mm thick cover slab char coal, watering pipe, wire mesh lugs, earth lead protection pipe 15mm bore, medium grade 7.5m long as applicable and as per plate No. 3 of SSR Part-I 2009 and all as specified.

Supply and fixing LED bulb 9 Watts, all as specified and as directed. Make : Havells/Bajaj/Philips

Takingdown carefully ceiling fan along with clamp, nut, bolt, washer and refixing the same after repairing, oiling, painting, greasing etc complete all as specified and as directed.

Supply and Fix in repairs to wall / pole of any height LED bldg security light 25 watt including GI pipe sutaible dia bracket not less than 1 mtr bend to shape with 2 clamps, nuts, bolts, washers and PVC 3 core ISI mark flexible wire from ceiling rose to fitting complete all as specified and as directed. Cat No LHETBXU7PA6S025 of Havells or eqvt in Philips / Wipro

Supply and fixing LED bulk head 10 Watt all as specified and as directed. Make : Havells/Bajaj/Philips

m/s A.A brothers

M/s Dara Constructions, Pulgaon

RAJ ENTERPRISES

Rehal Construction

Bidder Name

m/s A.A brothers

Rehal Construction

RAJ ENTERPRISES

M/s Dara Constructions, Pulgaon

M/s MM TRADERS