ADDN / ALTN TO BLDG NO. EWT-6 AND 7 AT RAJPUT REGT CENTRE FATEHGARH

Amount

Demolition of cement concrete in any description and in any position complete all as specified and directed

M & L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in coping & benching including necessary form work complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) not exc 1.5 sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm each but not exc 4.00 sqm each complete all as specified and directed.

S&F factory made Steel Window 1.25mm thick Box Type (primer coated) ERW hollow P section of size 60mm x 25mm, 1.25 thick sheet single rebated comprises glazed Skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T- Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including following fitting welded to frame shutter: (a) Hold Fast, 150mm long of 12mm square bar made to shape – 04 Nos per window (b) Handles of Z Sec 100mm long- 02 Nos (c) Stopper – 01 No per leaf (d) Cleat 55mm long of hollow square 15mm x 20mm x 63mm welded to hinges – 01 No per leaf (e) MS Pintal hinges of size 75mmx75mmx12mm-02 Nos per leaf (f) Fabrication & fixing complete all as specified and directed. Note : Glass, and painting shall be measured and paid separately under appropriate item.

S&F factory made Steel Window 1.25mm thick Box Type ( primer coated) ERW hollow P section of size 60mm x 25mm single rebated comprises gauged Skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf without sash bar of T- Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including following fitting welded to frame shutter: (a) Mild Steel Hold Fast,150mm long of 12mm Square bar made to shape – 04 Nos per window (b) Handles of Z Sec 20mm x 100mm long - 02 Nos (c) stopper – 01 No per leaf (d) Cleat 55mm long of hollow square 15mm x 20mmx63mm welded to hinges – 01 No per leaf (e) Mild steel Pintal hinges of size 75mmx75mmx12mm-02 Nos per leaf (f) Grills made out of MS square bar 12mm welded to FI frame and 100mm spacing of guard bar complete all as specified and directed. Note: Wire mesh and painting shall be measured and paid separately under appropriate item.

S&F factory made steel windows or ventilators, fixed type, with glazing bars complete all as specified and directed.

M & L for framed work such as guard bars fixed to flat iron or to box type window frame confirming to Fe-290 gde E-165 complete all as specified and directed.

Supply & fixing factory made WPC door frame 100% Solid (wood polymer composite) Size 100mm x 50 mm double Rebated ,made from wpc material comparing of virign PVC polymer of K value 58-60 (suspension grade ) calcium carbonate and natural fibers ( wood powder / rice husk / wheat husk) minimum compressive strength of 58 N/mm2, modulus of elasticity 900N / Sqmm and resistance to spread of flame of class 'A' category with property of being termite / borer proof, water / moisture proof & fire retardant & fixed in postion with SS dash fasteners / hold fast of required dia and length, colour of door frame to match that of shutter all as per specifications drawings complete all as specified and directed.

S & F factory made 30mm thick 100% Solid WPC ( Wood polymer Composite ) Solid Plain Flush Door Shutter of required size comprising of virgin PVC resin of K Value 57-60 (Suspension Grade), Calcium Carbonate and natural Fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded (Inner) with density not less than 650 kg/cum an ISO 9001 - 2015 Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N (Edge), Minimum Compressive Strength of 50 N/mm2 , Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer proof, water/ Moisture Proof, Fire Retardant and fixing with stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws complete all as specified and directed. Note :-(i) Material test certificate and authentication should be compulsorily provided by the manufacturing company. (ii) SS butt hinges & screws shall be measured and paid separately.

S & F factory made 30mm thick 100% Solid WPC ( Wood polymer Composite ) Solid Plain wire mesh Door Shutter of required size comprising of virgin PVC resin of K Value 57-60 (Suspension Grade), Calcium Carbonate and natural Fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded (Inner) with density not less than 650 kg/cum an ISO 9001 - 2015 Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N (Edge), Minimum Compressive Strength of 50 N/mm2 , Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer proof, Water/ Moisture Proof, Fire Retardant and fixing with SS butt hinges with necessary full body threaded star headed counter sunk SS Screws complete all as specified and directed. Note :- (i) Material test certificate and authentication should be compulsory provided by the manufacturing company. (ii) SS butt hinges & screws shall be measured and paid separately.

S & F mild steel sliding door bolt 300mm long clip type, stove enamelled black with bright bolt not less than 16mm dia complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts of extruded section of 200mm size complete all as specified and directed.

S&F Aluminium handles, cast type anodised of size 150mm complete all as specified and directed.

S&F stainless steel butt hinges cold rolled of size 100mm fixed with fully body threaded star handed counter sunk SS screws complete all as specified and directed.

M&L Preparing new surfaces of steel over 10 cm width or girth and applying two coats of synthetic enamel paint, complete all as specified and as directed.

M&L Preparing new surfaces of steel over 10 cm width or girth and applying two coats of synthetic enamel paint over and including a coat of red oxide primer complete all as specified and as directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and directed.

S & F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or stainless wire staples, wodden beads to steel windows/wodden doors complete all as specified and directed.

Taking down cement plaster on brick wall or stone wall etc. including raking out joints hacking for key, scrubbing down with water etc and disposed off unserviceable material of out side MD land complete all as specified and directed.

Demolition of brickwork masonary built in lime or cement mortar including all quiens arches, pillars but including concrete articles complete all as specified and directed.

M & L Brick work with sub class 'B' bricks old size straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed.

All as per item No.22 above but except Bricks.

M & L Rendering 15mm thick in CM (1:6) on fair faces of brick work or concrete surfaces to be finished even and smooth without using extra cement complete all as specified and directed.

M & L Rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces to be finished even and smooth without using extra cement complete all as specified and directed.

M & L for preparation of new plastered surfaces of walls and applying two coat of oil bond distemper white or any tint over prepared surface of wall and apply 1mm thick cement base wall care putty complete all as specified and directed.

M & L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and as directed.

M & L for complete removal of existing treatment surface and making surface smooth and applying two coats of OBD over prepared surface of 1mm thick cement based wall care putty complete all as specified and directed

M & L for complete removal of existing treatment surface and preparation of old plastered surfaces and making surface smooth and applying two coats of cement base paint over a coat of cement based primer complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed.

Demolition of PCC in Ground floors/PCC Path/Plinth Protection and paving n.exc 15cm thickness (below or above ground level) complete all as specified and directed.

M & L Non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors, skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer of cement (1:6) complete all as specified and directed.

M&L 18-22 mm thick machine cut kota stone as in flooring laid over and including 15mm thick screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including necessary grinding, rubbing and polishing (mirror finish) and complete all as specified and directed.

Mirror polishing on marble/ granite/Kota stone/ stone work where ever required to give high gloss finish complete all as specified and directed.

M & L 50 mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection, subbase of floors complete all as specified and directed.

Taking down timber roof trusses, coupled rafters or trussed beams above 4 mtr and upto 8 mtr complete all as specified and directed.

Dismantling framed timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed.

Dismantaling of asbestos cement (Corrugated, semi corrugated etc) sheetiting in roof covering complete all as specified and directed.

S & F for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in ridge, roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F for roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc conforming to Fe 410-W (Gde E-250) quality B complete all as specified and directed.

S & F for Rolled sections as in main and cross beams, hip and jack rafters;purlins where connected to common rafters and running rails and guide for sliding doors; fixed with angle cleats or other connecting platesconforming to Fe 410-W (Gde E-250) quality B complete all as specified and directed.

Dismantling Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

S&F False Ceiling Horizontal level regular edge grid 600 x600 mm from work using hot dip sections and fixing tiles vinyl laminated MPL gypsum panels size 595x595x6 to 8mm thick after lamination, suspended the grid with grid hangers to Roof Truss / RCC Slab all as per manufactured instruction.

S & F in repair 20mm dia Harrison rails, mild steel, chromium plated with decorative finish fixing brackets,stops, rollers, lattu etc complete all as specified and directed.

Taking down copper/aluminium point wiring of any description and any position (light, fan, socket or power point) complete including fixture and fittings such as switches, socket, ceiling rose, lamp holder, pendants, bracket and regulator etc including making good disturbed surface to match with the existing surface complete all as specified and directed

Taking down aluminium sub main wiring and making good disturbed surfaces to match with the existing surface roof/wall/floor complete all as specified and directed.

M&L for point wiring with 1100 volt grade PVC insulated and unsheathed 1.5 Sq mm (FRLS) multistranded copper conductor cable with continuous earth wire of 1.5 Sq mm (FRLS) multistranded copper conductor cable PVC insulated and unsheathed, drawn in & including concealed PVC rigid conduit medium grade with fittings (ISI marked) sunken pressed steel galvanised terminal boxes minimum 1mm thickness with top cover ISI marked plastic laminated hylam sheet for housing/ fixing switches etc for One light/ holder/fan/exhaust fan point controlled by one switch 05 Amp complete all as specified and directed.

All as per item No.49 here in before but for One 5 pin 5 Amp switch socket combination point on an independent board.

All as per item No.49 here in before but for One 5 pin 5 Amp socket point controlled by one switch on same board.

All as per item No.49 here in before but for one 16 Amp 6 pin switch socket combination independent with 4.0 Sqmm FRLS insulated unsheated copper conductor single core multistranded wire as in current & earth. Notes for item 49 to item 52 here in before : (i) The quoted rates shall be deemed to be inclusive for cutting chases in brick walls/pillars etc. for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. The portion of point wiring at RCC Columns/Beams/Ceilings shall be in surface conduit of suitable size fixed on surface with using PVC rawl plugs and provision of covering sunken boards/terminal boxes / junction boxes of any shape and size with 3mm thick bakelitelaminated sheet fixed with suitable GI screws and cup washers) (ii) Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A' (iii) The size of conduits shall be determined on permissible No. of runs of wires as specified in SSR Part-I (2009) clause 19.125 (B). However minimum size of conduit shall be 20mm dia (Medium grade)

S&F switch piano flush type 5 Amp single pole one way complete all as specified and directed

S&F socket outlet 2 in 1, 3 pin, 6/5 Amp complete all as specified and directed

S&F switch socket combination 2 in 1 flush type 5 Amp 5 Pin complete all as specified and directed

S&F switch socket combination 2 in 1 flush type 15 Amp 5 Pin complete all as specified and directed

S&F fix electronic fan regulator 5 stepped type complete all as specified and directed.

S&F ceiling rose PVC / poly carbonate isolated body three terminal AC 230 volts complete all as specified and directed.

M&L for sub main wiring with two single core 6 Sqmm FRLS copper conductor PVC insulated and unsheathed cable including PVC conduit medium grade (appropriate size) concealed in wall for sub main connection including 6 Sqmm FRLS insulated multistranded unsheathed copper conductor used as a earth wire to common earth and connection to earth dolly complete all as specified and directed. ( Note :- Two runs of 6 sqmm FRLS and one run of 6 sqmm FRLS copper for earth wire with PVC conduit shall be measured as one unit length.)

Supply and fixing of MCB distribution board SPN 240 Volt 8 way with 200 Amp rated bus bar having IP-43 protection and double metal door concealed in wall including connection with copper thimbles as required complete all as specified and directed.

S&F of MCB SPN 63 Amp, 240 volt 'C' curve 10KA complete all as specified and directed.

S&F of MCB SP 6 to 32 Amp, 240 volt 'C' curve 10 KA complete all as specified and directed.

S&F of LED light fitting 4 feet, 20 watt, 220 V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose including dismantling old light complete all as specified and directed.

S&F building security LED light fitting 30 Watt outdoor type made up pressure die-cast aluminium hosuing with high power LED as lighting source and lens embedded PC having top opening separate driver compartment with IP-66 protection and impact resistance of IK 07 for building security purpose with bracket of size made of GI pipe medium grade 40 mm dia 1.5 mtr long bend to shape as required and fixing with two nos MS clamp of size 40 x 6 mm for fixing of building security light fittings complete all as specified and directed.

M/S WASEEM KHAN CONTRACTOR (BID ID -3178632)

M/S Shree Gopal Engineers & Contractor (BID ID -3179034)

M/S S P CONSTRUCTION (BID ID -3178515)

m/s udit constructions (BID ID -3170037)