Development of park at west side of Ganapathy temple 60 feet road in Hiremagalur residential extension of chikkmagaluru

Development of park at west side of Ganapathy temple 60 feet road in Hiremagalur extension of chikkmagalur

Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead transportation to site spreading gr...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing Flush/ Ruled pointing: Pointing on stone work with cement,mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely,lining, including cost of materials, labour, curing as per s...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing and constructing load bearing wall with Solid Concrete blocks,of size 400x150x200mm having block density more than 1800kg/m3,and minimum compressive strength of 4.00 N/mm2 conforming to IS,2...

Providing 20 mm cement plaster with cement mortar 1:6 (1 cement: 6 coarse sand) finished with a floating coat of neat cement to brick/stone masonry including rounding off corners wherever required smo...

Finishing walls with textured exterior paint of required shade :New work,(Two coats applied @ 3.28 ltr/10 m²) over and including priming coat of,exterior primer applied @ 2.20kg/10 m² to give an eve...

Providing and fixing Steel work welded in built up sections/ framed,work, including cutting, hoisting, fixing in position and applying a priming,coat of approved steel primer using structural steel et...

Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete.

Providing & laying on roof pressed clay tile ridge (Mangalore tile) of 20mm thickness and of approved pattern on steel frame work complete.

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer....

Providing and fixing Steel work welded in built up sections/ framed,work, including cutting, hoisting, fixing in position and applying a priming,coat of approved steel primer using structural steel et...

Finishing with Epoxy paint (two coats) at all locations prepared,and applied as per manufacturer's specifications including appropriate,priming coat, preparation of surface, etc. complete. On steel wo...

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with...

Wet Mix Macadam (Plant mix method) Providing, laying, spreading and compacting graded stone,aggregate to wet mix macadam specification including,premixing the Material with water at OMC in mechanical ...

Supplying and fixing M15 grade precast cement concrete Kerb,stones for Roadway, Sidewalls and gutters fixed with CM 1:3,fixed and finsihed in line as per direction of Engineer in charge.,(The cost of ...

Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in require...

Supplying, filling, spreading &leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engin...

Clearing & grubbing road land including vegetation, bushes, shrubs, saplings by using weed cutter / minor equipment.per 100 m2

Digging pits of size 0.45 x 0.45 x0.45m filling 50% of the pit with top soil and remaining 50% of pit with1:2:3 proportion of sand (0.007), FYM (0.014cm) red earth (0.021cm) and and planting of well g...

Digging pits of size 0.45 x 0.45 x0.45m filling 50% of the pit with top soil and remaining 50% of pit with1:2:3 proportion of sand (0.007), FYM (0.014cm) red earth (0.021cm) and planting of well grown...

Digging of 1.0mx1.0mx0.45m area and filling 50% of the area with top soiland remaining 50% area with 1:2:3 proportion of sand (0.0375 cum),FYM (0.075 cum) red earth (0.0112 cum) and planting of well g...

Digging pits of 0.6x 0.6 x0.6m size and filling 50% of the pit with top soil and remaining 50% of pit with 1:6:6 proportion of sand (0.008), FYM (0.048cm) red earth (0.048cm), Neem oil cake (200 gram)...

Digging of 1.0mx1.0mx0.45m area and filling 50% of the area with top soil and remaining 50% area with 1:2:3 proportion of sand (0.0375 cum),FYM (0.075 cum) red earth (0.0112 cum) and planting of well ...

Digging trench of size 1mx0.30mx0.45m and filling 50% of the trench with top soil and remaining 50% trench with1:2:3 proportion of sand (0.0112), FYM (0.0224cum) red earth (0.0336cum) and planting of ...

SCRAPPING AND REMOVING TOP SOIL :-Scrapping the area by removing 0.15m soil and removing of unwanted plants,grass along with roots.25km initial transport, including lead, lift loading and unloading ch...

1st DIGGING:-Digging of the area for developing lawn including removing weeds, debris if any and breaking of clumps, watering etc. (1x1x0.45mt)

2nd DIGGING:- Digging of soil by removing grass etc if any and levelling of the soil etc .. (1x1x0.45mt)

procurement of quality red earth/soil and heap around pit (1x1x0.15mt)

Supply of inputs such as sand, FYM, Red earth in 1:3:6 ratio.mixing and spreadingthe mixture to 7.50cm thickness wherever required * Red soil 0.0075m3 * Farm Yard manure 0.0225m3 * Sand 0.045m3

Supply of lawn grass (Bermuda grass, turf)

Supply of lawn grass ( Mexican Grass, Turf)

Supply of lawn grass (Korean grass, Dibbling)

Labour Charges:- mixing Inputs as per prescribed proportion and quantity and spreading, applying fertilizers,digging, levelling , and dibbling with lawn grass at a spacing of 5cm x5cm & as per the dir...

TWO SEATER SWING - Length 8feet, Width 3 feet, Height 7.5 feet pipes are of 60mm Gi B class pipes, chain's are covered with rubber coating and rubber seats will be provided for sitting which is suitab...

TWO SEATER SEE SAW - Lengd-7 feet. Width-3 feet, Height-2 feet Main horizontal and vertical pipes will be manufactured using 75mm Galvanised iron pipes and seats will be of heavy duty LLDPE materials....

THREE WAY CLIMBER-7' height & 6' circle (All structures are manufactured using galvanized iron structures. 50mm vertical supports with 25mm, 35mm internal supports will be used. Each way of climbing w...

STANDARD SLIDE-Length-20 feet, Width 4 feet, Height-5 feet All structures are Gi B class pipes. Center poles are 90mm single support pole. Slide portion will be of LLDPE materials processed through Ro...

SPECIALl MGR -5 feet circle Galvanized iron structures, center poles will be 90mm diameter Pipes and supporting structures will be manufactured using 1-1/4,1,3/4" pipes. Seats will be provided using h...

CIRCULAR SWING FOUR SEATER-Length-6 feet. Width-5 feet, Height 7 feet Main vertical as well as horizontal structures are 60mm GI B class pipes and rings will be of 1" pipes. Seats will be provided wit...

Stainless Steel Slide Length -20 Feet, Width-4 Feet, Height -5feet, All Structures are GI B class pipes, centre poles are 90mm single support pole, Slide Portion wiil be of Stainless Steel Heavy Gauge...

ANIMAL SEE SAW - 8' Length-8feet, Width - 3 feet, Height 2 feet Main horizontal and vertical pipes will be manufactured using 75mm Galvanised iron pipes and seats will be of heavy duty LLDPE materials...

SPRING RIDERS CAR DESIGN/ ANIMAL DESIGN -20-25mm coil springs are used. Springs are specially designed for such spring riders. Animal top will be of heavy duty LDP roto modded products.

SPRING RIDERS - Bike design spring riders exclusively designed by us. Tyres will be similar of cyclee & for actions 20-25mm coil springs are used. Springs are specially designed for such spring riders...

GARDEN BENCH-5' Cast iron frames with fibre strips Will be provided with basic coat of painting. If additional coat of paintings requires, charges will be extra.

MERRY GO ROUND- 5' All are Galvanised structures/center supporting pipes will be either 2.5" or 3" diameter depending on suitability. Seats will be metal. For smooth movements 2 bearings will be provi...

MULTIPLAYER SYSTEM ALPS 34 - 25x18 Multiplayer units combinations of mini straight slide, single curve slide & double swings. Normal steps will be provided for climbing & slides will be provided with ...

MULTIPLAYER SYSTEM ALPS 35 - Multiplayer units combinations of 2 mini straight slide, plastic ladder & double swings. Normal steps will be provided for climbing & slides will be provided with entry ga...

SKY WALKER SINGLE- Galvanised iron structures neatly welded & finished. For protecting from coastal weather conditions, epoxy based marine paints will be used for coating. 16 numbers brand new bearing...

BICYCLE - Galvanised iron structures neatly welded & finished. For coastal weather conditions, epoxy based marine paints will be used for coating. 2 bearings are used form cycling movements & for adeq...

TAI CHI WHEEL- Galvanised iron structures neatly welded & finished. For coastal weather conditions, epoxy based marine paints will be used for coating. 8 numbers bearings will be insatalled using 4nu...

TRIPLE TWISTER - Galvanised iron structures nearly welded & finished. For coastal weather conditions, epoxy based marine paints will be used for coating 6 numbers bearings will be used for making bush...

Leg press-Galvanised iron structures neatly welded & finished, for coastal weather conditions, epoxy based marine paints will be used for coating 4 numbers brand new bearings will be used for smooth m...

Seated chest press double -Galvanised iron structures neatly welded & finished, for coastal weather conditions, epoxy based marine paints will be used for coating 40 numbers brand new bearings will be...

Shoulder press double -Galvanised iron structures neatly welded & finished, for coastal weather conditions, epoxy based marine paints will be used for coating 28 bearings are used & which will be inse...

Ab Benxh double -Galvanised iron structures neatly welded & finished, for coastal weather conditions, epoxy based marine paints will be used for coating, Back supported will be bent considering suitab...

SKY WAKER DOUBLE - Galvanised iron structures neatly welded & finished. For protecting from coastal weather conditions, epoxy based marine paints will be used for coating. 16 numbers brand new bearing...

Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawi...

Cutting Asphalt /Concrete road surface using machine cutter for leakage pit with earth work excavation in all classifications of soil including all lead and lifts bailing out water with pumps includ...

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 ...

Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant...

Fabricating, supplying and erection of ... ms long hot dip Galvanized Octagonal hot dip Pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements...

Supply of LED pole mounting type post top lantern with pressure die cast aluminum housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection ...

Supply of LED pole mounting type post top lantern with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection...

Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clA, bolts, nuts and wiring using suitable capacity wires.

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 10 Sqmm...

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 16 Sqmm...

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 2.5 to 25 sqmm

HDPE/PLB Pipe 50/42 mm

Supplying heavy gauge PVC conduit pipe …….dia .......mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of R...

Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS:8130-1984 and (Virgin) PVC insulation sheathed suitable for work...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Supply and Installation / Fixing / Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shock proof, IP65 (Weather Proof), rust proof, dust proof, water ...

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. ...

Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers etc.

Supply and fixing of 3pole power contactor with No or NC contacts on existing wood or panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 6...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...

Supplying and fixing porcelain fuse channel with cutout on existing panel board using necessary nuts, bolts, washers etc., complete. 100 A

GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long, 3.2 mm thick with bolt, nut, GI Strips and washer complete Minimum Weight of GI Pipe: 7.3 Kg

Good Quality well burnt Charcoal for grounding purposes packed in non returnable gunny bag of 30 Kg each.

Good Quality Salt for grounding purposes packed in 50 Kg gunny bag.

8 SWG GI Wire(4.064 mm Dia), Std Wt: 131 Kg or KM

Alluminium End Terminal (Lug) 10 Sq mm