Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.5 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹37.3 L+₹23,911 (0.64%)Rejected-Finance PEMASAR ROAD WARD NO 04 UDASAR BIKANER RAJ 334001 | BIKANER | BIKANER | RAJASTHAN | 334001 | L2 | Rejected-Finance High Rate Quoted |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
5 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Col Shery Goel, CWE Bikaner
HQ CWE Bikaner, Bikaner Mil Stn
Repair to chajja, ceiling grouting, guniting and structural strengthening under AGE B/R-I at Bikaner Mil Stn under GE (N) Bikaner
2023_MES_631849_1
CA No CWE BKN-Token No. 55/2023-2024
Open Tender
Civil Works
Item Rate
210 days
GE N BIKANER
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Yes
GE (N) Bikaner
₹90,000
Yes
5 Feb 2024
8 Dec 2023
12 Jan 2024
8 Dec 2023
5 Jan 2024
22 Dec 2023
8 Dec 2023 - 16 Dec 2023
Amount
Demolition of reinforced cement concrete as in roof slab, beams, chajja or any description and in any position (reinforcement cut as required to facilitate demolition) not otherwise specifically provided for in this Schedule, complete all as specified & as directed.
Demolition of unreinforced cement concrete of any description and in any position (not otherwise specifically provided for in this Schedule, complete all as specified & as directed.
Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.
Taking down cement plaster or cement lime plaster, terrazo etc on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc, complete all as specified and as directed.
Raking out joints/pointing to brick work, stone slab or precast concrete slab floor, any description, laid flat, work built in cement or cement lime mortar, complete all as specified & as directed.
Dismantling of brick tiles or roof tiles or terracing tiles single layer on roofs, complete all as specified and as directed. Note : Tiles shall be dismantled carefully and stacked properly including segregating the serviceable & unserviceable tiles as directed. Serviceable tiles shall be reused under the respective item of this Schedule.
Demolition of lime concrete of any description over roof, complete all as specified and as directed.
Dismantling timber scantling 40 sqcm and over in section in unframed work in any position complete all as specified and as directed.
Dismantling timber scantlings in fillets, rails, posts, rafters, purlins etc. under 40 sqcm in section, framed work complete all as specified and directed.
Dismantling of stone slabs in roofs, suspended floors, chajjas, landings, etc., any description, any thickness, jointed in any mortar, complete all as specified & as directed.
Dismentling wrought iron or mild steel work of any description as in girders etc complete all as specified and as directed.
Dismantling of cast iron work of any description and from any position not otherwise provided for in this schedule complete all as specified and as directed.
Taking down chowkat or frame with shutters (including fittings & fixtures) area not exc 1.5 Sqm each (without taking off the shutters from the frame) of door/window including cutting holes for taking out hold fasts and making good the same including disturbed portion of jambs, cills, etc complete all as specified and as directed.
M&L for PCC 1:4:8 type D2 using 40 mm graded crushed stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed.
M&L for PCC 1:2:4 type B1 using 20mm graded crushed stone aggregate as in foundations, filling and mass concrete or bedding layer to provide levelling coarse complete all as specified and as directed.
M&L for cement concrete 1:2:4 type B1, using 20mm graded crushed stone aggregate as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, mud stops and the like including weathering, slightly rounded, chamfered angle and throating as directed including use and waste of form work (straight or curved) all exposed surface of concrete finished fair complete all as specified & as directed.
M&L for Reinforced cement concrete 1:2:4 type B1 using 20mm graded crushed stone aggregate as in chajjas, parapet and the like complete all as specified & as directed. Note : Contractor shall have no extra claim on height, formwork required.
M&L for reinforced cement concrete M-25 grade (Design mix) using 20mm graded crushed stone aggregate in slabs supported on walls, beams and columns in floors, roofs, shelves and the like complete all as specified & as directed. Note :- Reinforcement & formwork shall be measured and paid for separately.
Supply only integral water proofing compound (ISI marked) complete all as specified and directed.
M&L for brick work with old size Fly Ash bricks, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar 1:6 complete all as specified and as directed.
M&L for brick work with old size Fly Ash bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed.
M&L for 5cm thick sand stone slab in sunshades, chajjas, shelves, cills, landings, cover stones, templates etc not exc 2m in length, punched dressed on face and along exposed edges, self faced on the other side and set and pointed in cement mortar 1:4, complete all as specified and as directed.
M&L for Jodhpur stone roof slabs, self faced 7.5cm to 10cm thick, 25cm to 35cm wide, hoisted and set, jointed and grouted in cement mortar 1:3 complete all as specified & as directed.
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exc 200mm thick (Horizontal or sloping) for rough finished flat surfaces of concrete complete all as specified & as directed.
Formwork to sides and soffits of floor or roof beams, beam haunching, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for rough finished flat surfaces of concrete complete all as specified & as directed.
Formwork to flat surfaces of chajjas, chullah hoods, troughs and similar items including edges for rough finished surfaces of concrete complete all as specified & as directed.
Formwork to edges of concrete flats, openings in concrete walls, floor and roofs, etc and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but not exc 20cm wide for rough finished surfaces of concrete complete all as specified & as directed.
S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour single piece extruded PVC profile reinforced with MS square tube, fixing in opening as per specifications complete all as specified and as directed.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with plain colour single piece extruded PVC profile ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour single piece extruded PVC profile for top rail lock rail bottom rail on either side and as gap insert for Top rail and bottom rail paneling of plain colour PVC sheet to fitted on the MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified and as directed..
S&F butt hinges of size 100mm extruded aluminium alloy with galvanized mild steel hinge pin, anodized type B-21 complete all as specified and as directed.
S&F 150 mm long aluminium anodized barrel tower bolts of extruded section (ISI marked) complete all as specified and directed.
S&F extruded aluminium alloy handle, 150mm size, fabricated type, anodized (ISI marked) complete all as specified and as directed.
S&F steel locking bolts with mild steel electrogalvanised plate and bright bolt not less than 10mm dia 100mm size complete all as specified and as directed.
S&F mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, framed signed boards, walk ways, railings, framework of water tanks and similar work including welding conforming to Grade E-165 (Fe 290), complete all as specified & as directed.
M&L for mild steel TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally or hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified & as directed.
M&L for mild steel TMT bars 6 to 8 mm dia cut to length, bent to shape required, including cranking, bending spirally or hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified & as directed.
All as per serial item No. 35.00 here-in-before but 6 to 10 mm dia in stirrups, spacers and binders complete all as specified & as directed.
S&F rolled mild steel as in Joist, channel, angle or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length directed) and similar work conforming to Grade E-250 quality `A’ all as specified and as directed.
M&L for 10mm thick plaster (screed bed) over roof slab in CM 1:4, mixed with integral water proofing compound as per manufacturer’s instructions, finished even & smooth without using extra cement, complete all as specified and as directed. Note : Supply only integral water proofing compound shall be measured and paid for separately.
M&L for applying evenly a tack coat of industrial bitumen 85/25 grade at the rate of 1.20 Kg per sqm including cleaning surfaces, complete all as specified & as directed.
M&L for 150 micron heavy duty Polythene film (White) over roof slab and the like, complete all as specified and directed.
M&L for APP based polymeric membrane minimum weighing 3 Kg/sqm and minimum 3mm thick, reinforced with polyester non woven fabric (weighing not less than 150 gms/sqm) laid on primed surface complete all as specified and as directed.
M&L for 1.5mm thick self adhesive waterproofing membrane consisting of self adhesive SBS (Styrene Butadiene Styrene) modified / bitumen compound covered on the top side with high density cross laminated polyethylene film and on the underside with an easy to peel silicon film all as per manufacturer’s instructions having minimum overlaps 50mm on sides and 100mm on ends, provided with & including suitable bitumen primer @ 0.30 litre per sqm as recommended by membrane manufacturer after cleaning the roof surface / sunken floor from all loose, dust, dirt, foreign material and particularly oil and grease marks, complete all as specified and as directed. Make : M/S TEXSA INDIA LTD / M/S PIDILITE INDUSTRIES LTD / M/S SIKA INDIA PVT LTD / M/S STP LIMITED Note : The net area of waterproofing treatment shall be measured and paid for without any extra allowance for side & end laps for membrane and this aspect shall be deemed included in the quoted rates.
M&L for Lime concrete terracing in roof with minimum thickness at edge 30mm and increasing uniformly towards ridges to obtain a chain slope of (1:40) as described in Para 11.27.2 of MES Schedule Part-I complete all as specified & as directed. Note : For lime concrete mudia kankar (Source : NAL) and Kolayat coarse sand in lieu of brick aggregate and surkhi respectively as specified in MES schedule Part-I shall be used.
M&L for 40mm thick brick tiles, joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement, laid on roof over & including 15mm thick screed bed in cement & sand mortar 1:6, complete all as specified & as directed.
All as per serial item No. 45.00 here-in-before but except brick tiles complete all as specified & as directed. Note : Old serviceable brick tiles retrieved from serial item No 6.00 here-in-before shall be used under this item.
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. including taking down tarfelt and brushing neat cement slurry @ 3 Kg/sqm including 15mm thickness sceeding in cement and sand mortar 1:4 finished even and smooth mixed with water proofing compound (WPC shall be measured and paid separately) complete all as specified & as directed.
M&L for 50mm thick PCC (1:3:6) type C1 using 20mm graded crushed stone aggregate as in flooring, leveling course, etc, over stone patti/RCC roof slab, surface finished fair and even, complete all as specified and as directed.
M&L for non skid ceramic tiles (coloured) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and as directed.
M&L for factory made Terrazzo tiles, 20cm x 20cm x 22mm thick, with size of chips upto 6 mm, with grey cement & no pigment, set, jointed and pointed in neat cement slurry over roof, and cut and polished, over & including 15mm thick screed bed in cement & sand mortar 1:6, complete all as specified & as directed.
All as per serial item No. 50.00 here-in-before but except terrazzo tiles complete all as specified & as directed.
M&L for glazed ceramic tiles (coloured) 7mm thick, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm (i.e 450mm x 300mm or as directed), on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick rendering (as screed bed) in cement & sand mortar 1:4 complete all as specified and as directed.
M&L for rendering 15mm thick in cement mortar 1:6 on fair faces of brick masonry or concrete surfaces of walls, finished even & smooth without using extra cement complete all as specified.
M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick masonry or concrete surfaces of walls, mixed with integral water proofing compound as per manufacturer’s instructions, finished even & smooth without using extra cement, complete all as specified and directed. Note : Supply only integral water proofing compound shall be measured and paid for separately.
M&L for rendering 5mm thick in cement and sand mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement complete all as specified.
M&L for Flush pointing in cement and sand mortar 1:4 to bricks laid flat or brick tiles in pavings, floors, roofs, aprons etc, complete all as specified & as directed.
M&L for preparation of newly plastered / unplastered surfaces of walls & applying three coats of white wash complete all as specified and directed.
M&L for preparation of newly plastered / unplastered surfaces of ceilings & applying three coats of white wash complete all as specified and directed.
M&L for preparation of old surfaces (plastered or unplastered) of walls including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying one coat of white wash complete all as specified & as directed.
M&L for preparation of old surfaces (plastered or unplastered) of ceilings including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying one coat of white wash complete all as specified & as directed.
M&L for preparation of new plastered surfaces of walls and applying two coats of oil emulsion distemper (OBD) of approved shade/tint over a coat of primer complete all as specified & as directed.
M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint of approved shade/tint over a coat of alkali resistant priming paint complete all as specified & as directed.
M&L for preparation of old decorated plastered surfaces of wall & applying one coat of cement base paint of approved shade/tint as approved by GE complete all as specified & as directed.
M&L for complete removal of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces and applying two coats of cement base paint of approved shade/tint over a coat of alkali resistant priming paint on walls complete all as specified and as directed.
M&L for preparation of new steel and iron surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of zinc chrome primer complete all as specified & as directed.
Dismantling carefully and taking up or down existing unserviceable/serviceable steel water tubing and connections of 15mm bore complete all as specified and as directed.
M&L for galvanized steel water tubing medium grade of 15mm bore with & including all fittings, fixed to walls and ceilings or laid in floors, complete all as specified and as directed.
Fixing/Laying only, jointing and testing old serviceable galvanized steel water tubing medium grade of 15mm bore obtained serviceable vide serial item No. 66.00 here-in-before including cleaning the pipe from inside & outside properly including rust & mud removal, with & including new fittings and fixed to walls and ceilings or laid in floors in new or old position complete all as specified and as directed. Note : The quoted rate shall deemed to include new GI fittings (ISI marked). Old fittings shall not be used.
Dismantling carefully and taking up or down existing unserviceable/serviceable steel water tubing and connections of 20mm bore complete all as specified and as directed.
M&L for galvanized steel water tubing medium grade of 20mm bore with & including all fittings, fixed to walls and ceilings or laid in floors, complete all as specified and as directed.
Fixing/Laying only, jointing and testing old serviceable galvanized steel water tubing medium grade of 20mm bore obtained serviceable vide serial item No. 69.00 here-in-before including cleaning the pipe from inside & outside properly including rust & mud removal, with & including new fittings and fixed to walls and ceilings or laid in floors in new or old position complete all as specified and as directed. Note : The quoted rate shall deemed to include new GI fittings (ISI marked). Old fittings shall not be used.
M&L for GI 15mm bore 150mm long tank nipple with and including checknut and washer complete all as specified and as directed.
M&L for GI 20mm bore 150mm long tank nipple with and including checknut and washer complete all as specified and as directed.
M&L for cutting chases, pinning in, making good to facings as original where required and pointing in cement mortar 1:3 for concealed water tubing and making good, cutting not exc 10 cm girth in brick walls, complete all as specified & as directed.
Disconnecting & taking down the existing unserviceable water tank and Supply and fixing 500 Litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I and as directed.
Disconnecting & taking down the existing unserviceable water tank and Supply and fixing 1000 Litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I and as directed.
Disconnecting existing serviceable rotational moulded polyethylene water storage tank, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and refixing in position of capacity not exc 500 litres including cleaning & removing all scale & dirt etc from tank with gunny bags, cleaning with fresh water and bleaching powder, complete all as specified and as directed.
Disconnecting existing serviceable rotational moulded polyethylene water storage tank, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and refixing in position of capacity exc 500 litres & not exc 1000 litres including cleaning & removing all scale & dirt etc from tank with gunny bags, cleaning with fresh water and bleaching powder, complete all as specified and as directed.
S&F in repairs Ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe 20mm bore (minimum weight 210 gms) complete all as specified and as directed.
S&F in repairs vitreous china squatting pan (Orissa pattern) water closet (white) of size 580x440mm with integral foot rests, ‘P’ or ‘S’ trap, including connection to trap and flushing pipe, antisyphonage pipe etc, complete all as specified and as directed.
S&F in repairs PVC valveless symphonic action type low level flushing cistern (ISI marked) of 10 litre capacity including 32 mm dia PVC flush pipe connected to water closet with inlet, ball valve, float and handle complete all as specified & as directed.
S&F stack clamp made out of MS flat 50mm x 5mm and 16 mm dia round iron stays, including bolts & nuts, securing ends of stays to walls or roof for 100mm bore pipe including two coats of synthetic enamel paint over a coat of red oxide primer including preparation of surfaces complete all as specified & as directed.
S&F stack clamp made out of MS flat 50mm x 5mm and 16 mm dia round iron stays, including bolts & nuts, securing ends of stays to walls or roof for 75mm bore pipe including two coats of synthetic enamel paint over a coat of red oxide primer including preparation of surfaces complete all as specified & as directed.
S&F stack clamp made out of MS flat 50mm x 5mm and 16 mm dia round iron stays, including bolts & nuts, securing ends of stays to walls or roof for 50mm bore pipe including two coats of synthetic enamel paint over a coat of red oxide primer including preparation of surfaces complete all as specified & as directed.
S&F in repairs 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints / solvent cement joints laid in trenches or in floors complete all as specified & as directed.
S&F in repairs 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints / solvent cement joints fixed to walls complete all as specified & as directed.
S&F in repairs 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints / solvent cement joints laid in trenches or in floors complete all as specified & as directed.
S&F in repairs 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints / solvent cement joints fixed to walls complete all as specified & as directed.
S&F in repairs 110mm bore PVC (SWR) bend, any redius complete all as specified & as directed.
S&F in repairs 110mm bore PVC (SWR) branch piece, double (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel braches complete all as specified & as directed.
S&F in repairs 110mm bore PVC (SWR) bends (any radius), disminishing pieces or tappers, reducers, Tee, bend (larger bore measures) with access door complete all as specified & as directed.
S&F in repairs 75mm bore PVC (SWR) bends (any radius), disminishing pieces or tappers, reducers, Tee, bend (larger bore measures) with access door complete all as specified & as directed.
S&F in repair PVC (SWR) coupler 110mm bore complete all as specified & as directed.
S&F in repair PVC (SWR) coupler 75mm bore complete all as specified & as directed.
S&F in repairs 50mm bore PVC (SWR) vent cowl complete all as specified & as directed.
S&F in repairs PVC (SWR) 'P’ trap 125/110 mm bore complete all as specified & as directed.
S&F in repairs 110mm PVC (SWR) reducers complete all as specified & as directed.
S&F in repairs PVC (SWR) floor trap plain with PTMT grating including jointing with solvent cement, diameter of outlet 75mm, complete all as specified & as directed.
Dismantling of spall / loose concrete from soffits of RCC slab to any thickness in a controlled manner carefully by low impact high frequency hammer or by manual chipping without damaging the existing concrete including cleaning the surfaces by air jet etc. complete all as specified and as directed.
M&L for cleaning existing reinforcement bars with wire brush / rotary wire brush making the surface free from cement skin, loose particles, dirt, etc and applying rust remover ('Rustoff 100' of Sika / '8832 GM' of Pidilite or equivalent of Fosroc / Dr. Fixit) on the rebars and removing the loose rust particles after minimum 24 hours by wire brush, all as per manufacturer’s instructions, complete all as specified and as directed. Note : Mode of measurement shall be affected surface area of column, beam, slab, etc.
S&F hard drawn steel wire fabric, weight not exc 4 Kg per sqm, cut to lengths, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm in dia, supplied and fixed in reinforcement, complete all as specified & as directed.
M&L for cement based polymer modified anti corrosive rebar coating system ('SikaTop Armatec-108' of Sika or equivalent of Dr. Fixit / Fosroc) to existing reinforcement all as per manufacturer’s instructions, complete all as specified and as directed. Note : Mode of measurement shall be affected surface area of column, beam, slab, etc.
M&L for one layer of 20mm thick concrete {comprises composition 1:2:1 plain cement concrete i.e. one part of cement (43 Gde OPC), two parts of fine aggregate and one part of 10mm and down size trap stone aggregate} mixed with 'Sprayset SL' of Fosroc (or equivalent in Sika / Dr. Fixit) 2.00 to 2.50% by weight of cement and 12.50 to 16.50 litre of water mixed as per manufacturer’s instructions and guniting by pressure nozzle with a delivery capacity of 2.5 Kg per Sqm over column, beam, roof slab, etc, complete all as specified and as directed.
M&L for providing and fixing rebar (TMT bar) of following diameter & length with epoxy resin (‘AnchorFix-3’ of Sika / ‘MIT600RE’ of Mungo / ‘FIS EB 390 S’ of Fischer / ‘HIT-RE 500 V3’ of Hilti) wherever required in structural members including power drilling, cleaning of holes, inserting rebars in holes, filling with epoxy resin to ensure the bond as per site requirement, complete all as per manufacturer’s instructions and as directed :-
16mm dia and 160mm long.
20mm dia and 200mm long.
10mm dia and 100mm long.
M&L for single layer of polymer modified cementitious high strength repair mortar {Compressive strength after 28 days ≥ 50 N/sqmm (According to ASTM C109)} as per site requirement (minimum 20mm thickness) all as per manufacturer’s instructions, complete all as specified and as directed. Make : Dr Fixit / Sika / Fosroc
Supply and fixing steel Injection Packer (12 mm dia & 60-75 mm long) including drilling of holes, fixing of Packer with 'Sikadur-31' of Sika or its equivalent of Dr. Fixit / Fosroc and cutting of packer by cut of wheel after completion of grouting, complete all as per manufacturer’s instructions and as directed.
Supply and filling shrinkage free low viscosity injection resin based on high strength epoxy resin ('Sikadur-52' of Sika or equivalent of Dr. Fixit / Fosroc), complete all as per manufacturer’s instructions and as directed.
M&L for Water tight formwork to column, beam, etc for repair work with micro concrete, as per site requirement, including bolting, strutting, propping, etc and removal of form work after repair work, complete all as directed. Note : Formwork under this item shall be measured and paid only for repair of RCC members with micro concrete.
M&L for non shrink cementitious micro concrete (‘SikaRep Microcrete-4’ of Sika or equivalent of Dr. Fixit / Fosroc) meeting ASTM C1107 standard and having minimum compressive strength 60 N/sqmm after 28 days as per ASTM C109, for repair to column, beam, slab, etc, complete all as per manufacturer’s instructions and as directed. Note : Formwork shall be measured and paid for separately.
M&L for applying injuction grouting with nozzle on slab. The mortal can be applied from a minimum of 15mm to 40mm thickness in smaller vertical pockets and upto 25mm thickness in horizontal applications. The Mortal should have a minimum compressive strength 12 N/mm2 in 01 day and 45 N/mm2 in 28 days, minimum flexural strength should be 08 N/mm2 in 28 days complete all as specified and directed. (Sikkon/Dr Fixit/Fosroc).
M&L for repair of cracks, corner with cement mixed with water proofing compound in the ratio of 1:1 complete all as specified and directed. (Dr Fixit URP - 301)/ Sikka/Forsoc) Note : Supply only water proofing compound shall be measured and paid for separately.
M&L for applying two coats pidifin coat including mixing of liquid agent and dry powder (Pidifin 2 K no 112 ) on wall complete all as specified and directed. (Dr Fixit /Sikka)
M&L for Heavy Duty reinforced acrylic coating for terrace/ walls water proofing (Make Dr Fix It, Asian, Sikka) over a coat of Primer for Sealer coat (Dr fix it) with roller complete all as specified and directed.
Removing up rooting vegitation growth building roof top/sides of walls n exc. 30 cm girth including and stacking of serviceable material and disposal of unserviceable material to a distance n exc. 50m and clearing the site and making good of the disturbed surfaces in brick work with cement and sand mortar 1:4 and cement plaster in cement and sand mortar 1:4, surface area n exc 0.50 sqm complete all as specified and directed. Note: For removal of vegitation if required at site rain water pipes bends to be removed preserved and re-fixed in the same location.
SUBHAM ENTERPRISES
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .