CGF 2025-2026

Amount

Earth work excavating and deposting on bank with initial lead of 10m& intial lift of 2m in hard stiff clay, stiff black cotton, hard red earth shales ,murram, gravel, stoney earth mixed with small size boulders etc completed as per std specification.

Plain Cement concrete of mix 1:4:8 (One part of cement, four part of sand and eight part of aggregates) using 40mm guage hard broken including cost conveyance of all materials to site and labour charges, transporting and placing in position including shoring, forming protective bunds, cofferdams bailing out of water labour for mixing compacting, finishing and curing, working at depths, tools and plants and incidental charges such as sheeting, shoring and bracing and their subsequent removal etc., complete as per standard specification

Steel centering for sides and soffits including supports and strutting upto 1m height for plain surface such as RCC slab with all cross bracings using mild steel sheet of size 90cmx60cmx10 gauge stiffened with welded miled steel angles of size 25x25x6mm for laid over silver oak for coundary wood joints of size 10x6.5 cm spaced at about 90cm centre to centre and supported by casurials props of 10cm to 13 cm dia spaced at about 75cm centre to centre and suppor etc completed as per std specification. A)Ground Floor Column B)First floor Coloumn B)Second floor Coloumn

B) Grade beam

C)Ground Floor Lintel. Beam &slab First Floor Lintel. Beam &slab

Supplying fabricating and placing in position of steel rods using TMT Steel ISI including cost of binding wire, cost of labour charges for fabrication and placing in position etc. Complete. Complying with std. specifications.

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - Upto Basement

Ground floor

First floor

Second floor

Brick Work in Cement Mortor 1:5 Mix (one part of cement and five part of sand) using II Class Bricks of size 9''X4 1/4''X2 3/4''from approved quarry including cost and conveyance of all materials to site loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications. a) Upto Basement

Ground floor

First floor

Second floor

Collection Supply and Filling of well gravel from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and slacking the same to site to departmental gauge and filling to required depth, well rammed etc., Complete as per standard Specification

Special Ceiling Plastering in cement motor 1:3 mix (one part of cement and three part of sand) 10 mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc., complete as per standard Specification

Plastering in Cement Mortor 1:5 Mix (one part of cement and five part of sand) 12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications. Ground floor Inner Add soffits First Floor

Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (uPVC) sections.Profiles: The profiles should be three chamber system which provides high insulation properties with outerframe 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with allcorner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals. Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside. Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug.

Supply and Fixing of Teak wood scantling wrought and put up for frames of door and windows including fixing holdfast and all labour charges and conveyance of all materials to site etc., Complete as per standard specification.

Supply and fixing of Teak wood fully panelled and Single leaf (two Equal Panels) shutter for door including all labour charges cost and conveyance of all materials to site etc., Complete as per standard specification.

Supplying and fixing M.S.grill to doors, special windows and ventilators etc as directed by the departmental officers inclusive of cost of MS grill including one of cost red oxide and fixing in position etc., complete (as per the schedule of rate) SL.NO.182 Q3

Supply and fixing of U-PVC Two shuter openable Window using G.I steel Reinforcement, friction hinge, multipoint lock, and 5mm clear glass or foam sheet including cost and conveyance of all labour and all meterial charges etc Complete as per standard specification.

LOUVERED VENTILATOR Supplying fabricating and fixing in position of Alumi,Anodised natural colour matt finished LOUVERED VENTILATOR fixed window with three panels using 62*38*[email protected]/m and the louvers with moving arrangement will be made with Aluminium channel of size 60*30*4 mm @ 1.27kg/m with necessary glass panes for louvers 4mm thick Aluminium clips , including all materials,labour,power consumption charges required for fabrication if necessary chipping dismantling making necessary holes in RCC coloumns, Beams or masonry wherever necessary with power drill to the extent required and made good to the original conditions after fixing as drected by the departmental officers The Aluminium surfaces should be anodised with matt finish under electrically condition in accordance with IS specification 1868/1962 of Anodic thickness of not less than 15 microns (fifteen) complete. All the materials should be got approved by the Engineer incharge before fixing as directed .

Supplying and fixing in Position of indian type water closet with all set in brick jelly concrete 1:4:8 Mix concrete 10 cm thick using 20mm brick jelly and top finished with c.m. 1:3 mix 20mm thick without any leakage etc. Complete as per standard specification.

Supplying and fixing in Position of Europeon type water closet with all set in brick jelly concrete 1:4:8 Mix concrete 10 cm thick using 20mm brick jelly and top finished with c.m. 1:3 mix 20mm thick without any leakage etc. complete.

Daddoing with glazed titles of size 305x200x6mm of approved make and quality and clour cement mortor 1:2, 10mm thick and pointing with white cement including finishing jointing and polishing with glossy finish etcComplete as per standard specification.

Paving the floor with Granite slabs (superfine polished with machine cut edges of 18-20 mm thick) of best quality and approved variety complying / confirming ISI specification land over cement mortar 1:3 (one cement and three sand) 20mm thick and pomted with same coloured cement neatly etc., complete. Ground Floor First Floor

Weathering course concrete with broken brick jelly of 20 mm gauge in pure slacked lime ( no sand to be added) over roof slab the proportion of brick jelly to lime being 32:12.5 by volume and laid over In a single layer and consolidated require designed and finished thickness by beating the concrete with wooden beaters of approved pattern , keeping the surface constantly with springing lime jiggery water asper standard specification and as directed by the departmental officers Complete as per standard specification.

Finishing with top of roof with one course of machine pressed tiles of size 20cmx20cmx2cm of approved quality laid in cement mortar 1:3 (One part of cement and three part of sand) 12mm thick mixed with water proofing compound conforming to ISS by 2% weight of cement used and the joint pointed neatly to full depth of tiles with same water proofing compound mixed with cement motar ,red oxide, etc Complete as per standard specification.

Paving the floor with Erocone design tiles for flooring of approved make and quality and clour of in cement mortor 1:3 20mm thick and pointing with white cement including finishing jointing and polishing with glossy finish etc complete as per std specification

Painting the new walls two coats over one coat of priming with best weather proof Exterior Emulsion paint of approved colour and quality including preparation of surface and finishing neatly etc., complete complying with standard specification and as directed by departmental officers Complete as per standard specification.

Painting the new wood work in all floor two coat of best synthetic enamel paint of approved colour and brand over one coat of primer including scrapping and preparation of surface, cost of breshes and neat finishing complying with stadard specifications

Painting the new iron work in all floor two coat of best synthetic enamel paint of approved colour and brand over one coat of primer including scrapping and preparation of surface, cost of breshes and neat finishing complying with stadard specifications

Wiring with 2X1.5 sqmm (22/0.3) PVC insulated sc unsheathed Cu.conductor cable of 1100 V grade in suitable heavy gauge MS conduit pipe concealed in wall and ceiling with MS accessories with switch box with 5A F.T. switch(two way) in flush with wall and convered with 3mm thick hylem sheet for MS switch box with continous earth wire connection of 14 SWGTC wire and making good of the concealed portion with suitable colour for concealed stair case light point/Fan Point (SD.NO.24) Page No -13

Wiring with 2 x 1.5 sqm(22/0.3) insuheathed Sc Cu Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and celing with PVC accessories with TW switch box and 5A F.T switch in flush with wall 150 x 100 x 113 mm TW switch Box for 5A 3 pin non inter locking CS plug with continous earth wire connection of 14 SWG T.C wire and making good of the concealed portion with suitable colour for concealed PVC plug point (SD 36) Page No -20

Supply and fixing of TNEB meter board suitable for 32 A single phase service connection with 32A fues unit (500 V) 32A neutral link and earth link (1"X18" copper flat) on TW plant of size 375mm X 300mm X19 with supporiting TW reepers of 1 " thick an either side withpainting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wirefrom EB meter to fuse unit (SD No.125) Page No -51

Supply and run of 4 of 6 sqmm (84/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in 32mm G.I pipe (Class 'B' bent at both ends with necessary angle iron up right and end supports for mains (SD No.73) Page No -33

Supply and run of 4 of 6 sqmm (84/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade on7/20 GI bearer wire for service connection mains (SD No.68)

Supply and fixing of Energy Efficient Ceiling Fan 1200 mm complete with stepped electronic 300 W regulator with 1 meter down rod on the existing clamp etc complete as per std sepcification.connection mains (SD No.107)

Supply and fixing of 3 phase 4 wire 4way ICDB of 32 Amps per way with 100 Amps TPN MC switch with suitable trunking box ms cable entry boxes and internal connection on suitable angle iron frame work with earth connection etc complete as per std sepcification.(SD177)

Supply and delivery of 2000 litre capacity H.D.P.E.Water tank approved ISI Quality including cost and convenance of all materils to the site etc complete As per standard specification

Wiring with 2x4sqmm (56/0.3mm) PVC insulated SC unsheathed Cu. Cable conductor cable of 1100V grade in suitable heavy gauge M.S.conduit pipe on wall and ceiling with M.S.accessories with 150mm x 100mm x 75mm MS switch box for 15A 3 pin non interlocking CS plug with painting of suitable colour,with continuous earthwire connection by 14 SWG TC wire for open power plug point. SD 13

Supply and fixing of WT bulk head fitting with guard (Philips / Bajaj / Crompton / K. Lite) suitable for11W CFL lamp with CFL. SD 83

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase near wet riser using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick will be provided with tubular supports made of 304L Grade Stainless Steel pipe of 25mm dia of 1.60mm thick welded to the railing. The supports will be grouted into the wall and provided with 93.00mm thick Stainless Steel circular base plate of 304 Grade. The rate shall included for grouting into concrete with necessary supporting arrangements the hand rail in floor polishing buffing, bonding, cutting, grinding, conveyance, welding charges, electrical charges, etc. complete

Supply and fixing of single box type 4'40 W flu fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting. SD 88

Supply and delivery of following PVC Pipes 110mm PVC Pipe 6kg/cm2 including cost and conveyance of materials to site etc complete,.

Supplying and laying Precast Designer Paver Block confirming to IS 1568-2006 specification manufacturing and laying standard of M40 grade 63mm thick (table clauses 5 and 9.14) suitable for bus terminals industrial complexes road on expensive soils etc., including the cost of paver block of size 225mm x 12.50 mm x 80mm and conveyance of materials to work site mentioned in the tender schedule cost of loading and unloading handling during over Stone dust of 150 mm thick (excluding the cost of sand) conveyance paver block cutter to site and hire charges of vibrators and block cutter operator and labour for leveling the sand to paver block etc., complete ISI 15658-2006.

Supplying, fabricating, erecting and fixing Hilux (or) Equivalent Board False Ceiling upto a ceiling height of 4.5m from floor level

N KANDHASAMY (BID ID -1344897)