SITC OF 11kV Industrial Feeder from 33/11kV Ankuli PSS, Upgradation of 11/0.4kV 63kVA Transformer to 11/0.4kV, 500 kVA Plinth mounted Substation and construction of new 3 ph-5W LT Line on existing poles for Power supply to the IE-Ankuli Berhampur

Amount

Construction of 11kV OH Line with 100sq.mm AAA Conductor with 7Nos of 160 x 160mm 11m Long GI WPB Poles-0.2Km

Supply of all reqd. materials & installation (SITC) of 11 mtr. Long GI WPB Pole with excavation of pole pit in all kind of soil of depth 1/6 th of pole height, with GI base plate (of size 500 x 500 x 10 mm thick @ 20 Kg/pc) & mass concreting (1:3:6) of size (0.45x0.45x1.5 m) using 40 mm HG metal as required and coping of pole base with concreting (1:3:6) of size (0.3x0.3x.45 m above GL) complete with curing & as per technical specification and direction of E.I.C.

SITC of coil type earthing as per technical specification and direction of E.I.C.

Supply, fabrication & erection of 100 x 50 x 6 mm G I Channel as required for straight cross arm complete as per technical specification and direction of E.I.C.

Supply & erection of GI 11kV V-Cross arm along with G.I. Back Clamp ) as per technical specification and direction of E.I.C.

..........do.................of GI F-Clamp

..........do................ of G.I Nut, Bolt & Washers

SITC of HT(11 KV) stay sets for overhead line including excavation & mass concreting of stay pit , stay binding etc. complete with HT stay insulator, stay clamp & bow, stay plate ,stay rod, 7/10 SWG G.I stay wire, thimble etc. complete as per technical specification and direction of E.I.C.

SITC of 11 kV Polymer Type Pin Insulator complete as per the site requirements.

SITC of 11kV (T & C type) Polymer Type Disc insulator (45kN) .

SITC of 11KV (T & C type) Hardware fitting (45kN).

Supply & Stringing of 100 sq mm AAAC complete.

Supply and Installation of Danger Board

Sundries (Painting, Al.Binding Tape & Wire, Anticlimbing device,clamp connector,jumpering materials,socket & other cable accessories,insulating tape etc)

Upgradation of 11/0.4kV 63kVA Transformer to 11/0.4 KV,500 KVA, Plinth mounted Substation(With boundary wall)

Supply, fabrication & erection of GI members like a)100 x 50 x 6 mm Pressure Channel (9.2Kg/m), b) ABS mounting channel 100 x 50 x 6 mm (9.2Kg/m),c) HGF Mounting channel 75 x 40x 6 mm Channel(6.8Kg/m) , d) 50 x 50 x6 mm Angle for cantilever arrangement (4.5 Kg/m) & e) DP Bracing channels of size 100x50x6mm, 50x50x6mm-equal angle f) LTDB mounting Angle 50 x 50 x6 mm as required for the Double Pole Structure(for mounting LTDB,ABS & HGF- on cantilever ) complete as per technical specification and direction of E.I.C.

Supply & fixing of G.I. Nut, Bolt & Washers as required & complete as per technical specification and direction of E.I.C.

SITC of 11KV (T & C type) Disc insulator 45kN Polymer.

SITC of 11kV (T & C type) Hardware fitting 45kN.

SITC of 11kV AB switch 3 Pole (400 Amp) with operating handle, “I” hook etc as per the site requirement & complete as per technical specification and direction of E.I.C.

SITC of 11kV H. G Fuse 3 Pole(400A) as per the site requirement & complete as per technical specification and direction of E.I.C.

SITC of 9 KV (10 kA) Lightning Arresters complete as per technical specification and direction of E.I.C.

SITC of pipe earth electrode made out of 40 mm dia class-B G.I Pipe of 3 mtr. Long with arrangements for fitting and termination of G.I Flat/G.I wire with G.I nut-bolts and washers including cost of excavation of pole pit in all kind of soil, burnt wood charcoal salt, bricks masonry chamber with removable RCC cover complete as per technical specification and direction of E.I.C.

Supply and fixing of 50 x 6 GI flat for N earthing & 25 x 5 G.I flat as required for earthing of different parts complete as per technical specification and direction of E.I.C.

SITC of 500 kVA 11/0.4 kV out door type (BIS & BEE Level-2 rated) Copper wound Transformer with tap changer complete as per technical specification and direction of E.I.C.

Supply, laying (in UG trench with brick protection as required & with provision of cable ladder)& termination with lugs & testing and commissioning of 1 core x 300 sq mm Al Armoured PVC Cable complete as per technical specification and direction of E.I.C.

Supply of all reqd. materials & installation of Transformer Plinth of height 2.1m (as per prior approved drawing from EIC/TPSODL) and complete with curing as per technical specification and direction of E.I.C.

SITC of LT Distribution Box with MCCB, Aluminium Busbar for 2 bay including kitkat fuse complete as per technical specification and direction of E.I.C.. (as per prior approved drawing from EIC/TPSODL)

Sundries (survey,tree cutting,danger plate,piercig connector,small size nut & bolt,Binding Wire, Insulating Tape,socket and cable accessories etc)

Supply of all reqd. materials & construction of boundary wall with MS gate complete as per TPSODL technical provision/ specification and direction of E.I.C. (as per prior approved drawing from EIC/TPSODL)

Supply & filling of sand & Supply and laying of gravel complete as per technical specification and direction of E.I.C.

Construction of 3ph 5W LT Line with 3x95+1x70+1x16sq.mm with LT XLPE AB Cable on existing poles- 0.4Km (12 spans_ (2 circuit)

Supply, Stringing, testing and commissioning of 3x95+1x70+1x16sq.mm AB Cable complete.

....do... of Dead End Clamp

....do... of I hook for AB Cable.

....do... of Pole Clamp for I Hook complete.

....do... of Suspension Clamp with I Hook for AB Cable.

....do... of G.I Nut, Bolt & Washers as required.

Sundries (survey,tree cutting,danger plate,piercing connector,small size nut & bolt,Binding Wire, Insulating Tape,socket and cable accessories etc)

Dismantling

Dismantling of materials/equipment of the existing installation and handing over to the concerned TPSODL section officer with prper documentation complete as required.

United Electricals & Engineering Pvt. Ltd.