REPAIR /REPLACEMENT OF PLASTERING, GI PIPE LINE, ,JOINERY AND OTHER B/R ITEMS TO CERTAIN MARRIED AND OTM ACCN UNDER AGE B/R (WEST) AT COLABA UNDER GE (W) COLABA, MUMBAI

Amount

M&L for removing plants including roots by dismantling of brickwork/PCC including necessary scaffolding of any type and in any position or location i.e roof, parapet walls near pipes etc and applying Chemical glyphosate 41% or 71% and removing roots for preventing the re-growth & making good of disturbed portion using PCC 1:2:4 type B0 & 10mm thick cement plaster in CM(1:3), size of disturbed portion not execeeding 150mm X150mm X 200mm all as specified and directed.

M&L for filling cracks by cutting 'V' groove of internal or external plaster of walls, ceilings/Chajjas all along the crack upto 10 mm depth and remove the loose plaster/concrete by suitable tools, filling cracks with crack paste compound and applying second coat after 10-12 hrs of application of first coat and for external application must be coated with paint including necessary scafolding of any hieght complete all as specifed and direcetd. Make : Use of Dr Fixit Crack 'X' shrinkfree paste compound/ Smartcare Texture Crack Filler / Build Core Compound / Fosroc Compound, as approved by GE

S&F hard drawn steel wire fabric not exceeding 4 kg per sqm cut to lengths, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm dia and fixed in reinforcement or by anchroring on wall screw min 8 -10 cm in depth drilled and grout into the required wall and concrete structure all as specified and directed

M&L for providing and placing in position micro-concrete, grade M-40, which shall be cement based prepacked single component, chloride free, non-shrink, free flow, self compacting, ready to use after mixing water in specified proportion, obtained from Fosroc / SIKA / BASF/ Dr Fixit, thickness of section upto 40 mm complete all as specified and as directed by the Engineer in charge Note:- Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/tapping with a blunt metal instrument.

Demolition of reinforced cement concrete in roofs, flooor (other than ground floor ) beams, staircase, landing chajja and similar suspended work including necessary scaffolding of any type and in any position or location & any height of building (reinforcement cut as required to facilitate demolition) and removing rubbish to a distance 50m at low lying area all as specified and directed

M&L RCC 1: 2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in Chajja including necessary scaffolding of any type and in any position or location & any height of building all as specified & directed

Use and waste of formwork to chajjas and similar items including edges including necessary scaffolding of any type and in any position or location & any height of building all as specified & directed

M&L mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified & directed .

M & L for Ready mix plaster for internal / external wall rendering 15 mm thick in two coats of 10 mm base coat and 5 mm finishing coat on brick wall or concrete surfaces incl taking down off old cement plaster and cement mortar and making groove of appropriate size and finishing sand faced finished using sponge, including use of scaffolding and removing debris outside MD land complete all as specified and as directed. Name of Manufacturer: M/s Premier Floor to Roof Materials pvt. ltd/ M/s Walplast Products pvt. ltd/ M/s Ultratech Cement Ltd/M/s Sound buildcare pvt. Ltd/ or other approved equivalent make.

M&L rendering or celling 10mm thick on fair faces of brick work or concrete surfaces on cement mortor1:3 including taking down and removing debris outside MD land all as specified and as directed.

M&L for cleaning all loose laitance on the concrete substrate and applying one coat of epoxy bonding agent on exposed concrete surface to ensure bond between old concrete & new concrete by brush application including scafolding at any height as specified and directed. Make:- brand Monobond SBR of Krishna Conchem or Dr. Fixit epoxy bonding agent or Shalicrete URP of STP Ltd

M&L for rendering minimum 20 mm thick on average polymer modified mortar in cemet mortar (1:3) with graded quartz sand with additive Monolith - PMM of Krishna conchem or Shalifix RM SG 01 of STP Ltd. or equivalent 15% by weight of cement in one coat with and including curing as per manufacturer's instruction all as specified and as directed. Note :- (i) Repirs to be done by authorised applicator of Dr Fixit/ Build Core/Fosroc/Pedilite as approved by GE. (ii) Quanitiy of polymer shall be 15% by weight of cement. (iii) Pan mixer shall be used to get homogenous dough on bond coat surfaces. (iv) Repaired surfaces area shall be kept moist for 5-7 days.

M&L for providing and applying two coats of Fiber reinforced elastomeric Liquid applied membrane of Asian paints or equivalent make, having crack bridging ability upto 2.5 mm, resistance to positive hydrostatic pressure of upto 10 bars, superior anti-carbonation, 1st coat self-priming coat & 2nd coat undiluted coat ensuring force coverage of 30 sq. ft/kg for 2 coat with 160 micron DFT and applying one coat of thick modified acrylic silica base texture (2mm to 2.5 mm thick) as per desired pattern and 8 hours two coats of Ultra durable pure acrylic exterior emulsion with Low VOC , Anti Algal, Excellent DPUR for dust pick up resistance of fading of colours ensuring 60 micron DFT for two coat including removing existing roof treatment all as directed by Engineer-in-Charge. Note : Item to be executed by authorised aplicator only. Make:- Asian Paints or equivalent.

M&L for preparing newly plastered surfaces of walls and applying two coats of weather proof acrylic exterior paint (100% Acrylic) over a coat of primer and use of scaffolding where required at any height of buildings for external painting all as specified and directed.

M&L for preparation of newly plastered wall surfaces and applying a coat of wall care putty (Birla White Wall care or equivalent) 3mm thick average thickness on plastered surfaces including rubbing with sand paper, preparatory to distempering and applying two coats of distemper oil emulsion over a coat of alkali resistant priming paint all as specified and directed. Make : Asian - Tractor or Berger- Bison)

M&L for preparation of newly plastered celling and applying three coats of white wash all as specified and directed.

M&L for preparing the old painted plastered surface of external walls /ceiling/ chajjas/ /roofing, concrete structure or any other similar structure exterior walls are scrubbbed and scrapped thoroughly to remove smoke soot, moulds, moss and efflorsant salts, and mildew using steel wire brush with mild solution (like bleaching powder in water) can also be used to get rid of mildew and algae from the walls. Walls need to dry completely. High pressure water jet can also be used to wash away dirt and any old paint flakes.Cracks need to be attended on priority. Cut in along the length of the crack using a knife. Crack Filling compounds are used to fill in the cracks. Surface is then sanded using sand paper to even the surface all as specified and directed.

M&L for applying two coats of weather proof acrylic exterior paint (100% Acrylic) (up to four storeys bldgs) including use of scaffoldings all as specified and directed. Make : Apex Ultima or equivalent

M&L for applying two coats of weather proof acrylic exterior paint (100% Acrylic) (up to 14th storey bldgs) all as specified and directed. Make : Apex Ultima or equivalent

M&L for mild steel props for scaffolding for building of any height ( including high rise bldgs upto and including 14th floors) for repairs of cracks , chipping off loose plaster, preparation of external wall surface or any other similiar work for application of painting as specified and directed by Engineer-in-charge. Note : Item will be measured and paid as per the coverage area of painting only once for a given location.

M&L for French polishing with two or more coat on new / old surfaces of any description, width or girth after cleaning and fine sanded and making free from any wax and grease, removing it completely (with paint & varnish remover if required ) and preparing the surface by filling of open grained with a coat of wood filler and making it smooth shining surface using alcohal based shellac finish .

M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10cm in width or girth and applying one coat of synthetic enamel paint at any height including use of scaffolding wherever required for external painting of wooden surfaces all as specified and directed.

M&L for preparation of old painted steel surfaces of any description not otherwise described over 10cm in width or girth and applying one coat of synthetic enamel paint at any height including use of scaffolding where required for external painting of steel surfaces all as specified and directed.

M&L for preparation of old steel surfaces for cleaning and removing loosely inherent material/paint using hand tools—a wire brush/ scraper (or by sand or grit blasting or wire brushes operated by pneumatic power or electricity to near white metallic surface) or using a power tool such as a grinder, and then washing it off with acetone or thinner or any other water based liquid solvent to get cleaner surface for painting, coating, and welding prepare the surface by and then applying two coats of epoxy paint (polyurethane aluminium based) over one coat of epoxy primer (zinc phosphate based) as specified and directed by Engg- in - charge. Make : Asian Paints PPG or equivalent.

M&L for preparation of old decorated surfaces of walls including brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss and efflorescent salts and trading oil, greasy spots, filling nail holes and apply one coat distemper oil emulsion on walls complete by an authorised applicator all as specified and directed. Make : Asian - Tractor or Berger- Bison

M&L for preparation of old decorated surfaces of walls including brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss and efflorescent salts and trading oil, greasy spots, filling nail holes and apply two coats of distemper oil emulsion on walls by an authorised applicator all as apecified and directed Make : Asian - Tractor or Berger- Bison

M&L for preparation of old decorated surfaces of ceiling and applying one coat of distemper oil emulsion on walls complete by an authorised applicator all as apecified and directed Make : Asian - Tractor or Berger- Bison

M&L for preparation of old decorated plastered surfaces of ceiling and applying two coats of white wash all as apecified and directed

M&L for applying two or more coats of 100 % premium Acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt and weather resistance exterior paint of required shade and including priming a coat of exterior primer applied @ 0.9ltr / 10 Sqm over new surface all as apecified and directed

M&L for complete removal of existing treatment on wall surfaces and applying a coat of wall care putty (Birla White Wall care or equivalent) 3mm thick average on plastered surfaces including rubbing with sand paper, preparatory to distempering and applying two coats of oil bound distemper over a coat of wall primer all as apecified and directed Make : Asian - Tractor or Berger- Bison

M&L for writing letters or figures (block. Roman, Italic or Indian) n exc 30cm, letters shall be painted with thick paint all as apecified and directed

Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and rubbish off the primises all as apecified and directed

M&L Non Skid coloured ceramic tiles 7 to 8 mm thick (Square / Rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed. Make : Johnson / Kajaria / Nitco

M&L coloured glazed digital ceramic wall tiles 300x450x7mm / 300mm x 600mm x 7mm thick in vertical surfaces such as skirting and dados set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles all as specified and directed. Make : Johnson / Kajaria / Nitco

M&L coloured double charged polished glazed vitrified tiles 10 mm thick (Square / Rectangular) area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm in floors, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles all as specified and directed. Make : Johnson / Kajaria / Nitco

M&L coloured double charged polished glazed vitrified tiles 10 mm thick (Square / Rectangular) polished area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm in vertical surfaces such as skirtings and dados set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles all as specified and directed. Make : Johnson / Kajaria / Nitco

M&L 15mm thick screed bed or bedding layer in cement mortar (1:4) for laying floor finishes like tiles etc complete all as specified and directed.

Demolition of brick work or stone /boulder masonry built in cement mortar, including all quoins, arches, pillars, all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in CM (1:6) all as specified and directed.

M&L rendering 10 mm thick in CM (1:4) on fair faces of brick work all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided all as specified and directed.

S&F joist, channel, angle or tee sections, or MS Flats fixed independantly without connecting plates, etc Fe 410-W (Gde-E- 250) quality- A (cut to ordinary lengths i.e within 20mm of length indicated) as in frame work all as specified and directed.

M&L 1.5 mm thick galvanised steel sheet as in valley gutters fixed with rivets or other suitable arrangements over MS brackets trapezoidal shape of required profile with desired slope all as specified and as directed by Engr-in-Charge.

M&L for preparation of new steel surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed .

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards of any thickness, including cover fillets all as specified and directed.

M&L powder coated aluminium snap grid having a size of 605mm x 605mm and sections incorporated in frame work shall conform to IS 733, IS 737 and IS 1285 and snap grid frame work shall be fixed to ceiling with supporting hanger 6mm dia mild steel rod, "J" bolts with necessary bolts, nuts and washers all as per manufacturer's instruction. The main & cross tees shall be jointed at junction/crossings with anodized aluminum angle bracket of size 19.05mm x 19.05mm x 1.45mm, weighing 0.14 Kg per RM, fixed with suitable mild steel, bolts nuts and washer all as per manufacturer's instruction. The snap grid shall be supported at ends all along the wall with anodized aluminum angle of size 38mm x 25mm x 2.18mm, weighing 0.358 Kg per running meter all as specified and directed.

M&L 8mm thick exposed metal frameceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x600 mm grid (frame work for ceiling shall be measured and paid seperately) fixed to aluminium frame work in ceiling and all other similar works all as specified and directed

Taking up or down GI steel tubing and connections including cleaning for refixing or removed to store,15 mm dia bore all as specified and directed

Refixing old 15 mm steel tubing and including cleaning in positon with all fittings and fixtures (walls, ceiling and floor etc complete) all as specified and directed

S&F GI tubing 15mm bore medium grade with all fittings and fixtures as per IS 1239 (PART 1) : 2004 and fixed complete to wall and ceiling or laid in floors all as specified and directed. Make: Jindal/ Tata / Swastik

Supplying and fixing/ laying of CPVC pipes 16mm SDR 11 & Plain CPVC SDR 11 with all fittings laid in wall, floor, trenches and celling all as specified and directed

Taking up or down steel tubing and connection including cleaning for refixing or removed to store, 20 mm dia bore all as specified and directed

Refixing old 20 mm steel tubing and including cleaning in positon with all fittings and fixtures (walls, ceiling and floor etc complete) all as specified and directed

S&F GI tubing 20 mm bore medium grade with all fittings and fixtures as per IS 1239 (PART 1) : 2004 and fixed complete to wall and ceiling or laid in floors all as specified and directed Make: Jindal / Tata / Swastik

Supplying and laying/fixing of CPVC pipes 20 mm SDR 11 & Plain CPVC SDR 11 with all fittings laid in wall, floor, trenches and celling all as specified and directed

Cutting chases, pinning in and making good to facing on brick walls where required and pointing in cement mortar (1:3) to ends for concealed water tubing and making good, cutting n, exc. 10cm girth all as specified and directed.

S&F in repairs vitreous China wash basin of any colour, flat back of any size including cutting for pinning in ends of brackets all as specified and directed. Make : Cat Part No S2040139 of Cera or Equivalent in Hindware / Parryware/Prayag

S&F in repairs 10 litre capacity PVC low level flushing cistern with all accessories fixed with WC including syphone pipe, PVC flushing pipe of any size complete all as specified and directed. Make : Cat Part No B1010106 of Cera or Equivalent in Hindware / Parryware/ Prayag

S&F in repair 15 mm bore fancy type angular valve cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions all as specified and directed. Make:- ESS ESS CROMA Cat Part No C 204 or Equivalent ofJaquar/ Parko / Prayag

S&F in repair 15 mm bore fancy type concealed stop cock (regular body) cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions all as specified and directed. Make:- ESS ESS CROMA Cat Part No C 332 or Equivalent of Jaquar/ Parko / Prayag.

S&F in repair PVC connection 15mm size PTMT nuts of length 450 mm all as specified and directed.

S&F in repair 15 mm bore fancy type bib taps long body cast copper alloy chromium plated, screwed down, screwed for iron pipe or for brass ferrule all as specified and directed. Make:- ESS ESS CROMA Cat Part No C 202 or Equivalent of Jaquar/ Parko.

S&F in repair 15 mm bore, fancy type, wall mixer, brass chromium plated with 115 mm long bend pipe for connection to overhead shower (with bush and piston Divertor fittings) with aerator all as specified and directed. Make:- ESS ESS CROMA Cat Part No C 216 or Equivalent of Jaquar / Parko / Prayag

S&F in repair 15 mm bore, brass chromium plated, fancy type health faucet with SS connection pipe 1 metre long all as specified and directed. Make:- ESS ESS CROMA Cat Part No C 232D or Equivalent of Jaquar/ Parko/ Prayag.

S& F in repair water closet seat cover any coloured pattern with flat bottom and mild steel chromium plated or aluminium hinging devices complete all as specified and directed. Make : Cat Part No S1020101 of Cera or Equivalent in Hindware / Parryware

S&F in repairs PVC cabinet mirror of size 300 x 450 mm all as specified and directed. Make : Prayag cat no. 551 or equivalent in Polytuff/Modifloat.

S&F in repair 75 mm dia PVC(SWR) floor trap with grating including jointing with solvent cement all as specified and directed.

S&F in repairs 15 mm bore gun metal gate valve cast copper alloy, screwed down high pressure with wheel head, screwed both ends with crutch or butterfly handle for iron pipes all as specified and directed.

S&F in repairs 20 mm dia gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed all as specified and directed

S&F in repair 4.00 mm thick PVC sheet laminated plain coloured, marbled mosaic or mottled finish of any colour laid with approved rubber based adhesive in floors after preperation of floor surface all as specified and directed. Make : Royal House/ Premier Poly Film Ltd.

Taking down chowkats or frame with shutter ( without taking off shutter from the frame) area exc 1.5 sqm but n exc 4 Sqm each all as specified and directed.

Taking down chowkats or frame with shutter (without taking off shutter from frame) area nexc 1.5 sqm each all as specified and directed.

Taking down chowkats including shutter and refixing in the same opening of any description area exc 1 sq m but not exc 2 sqm eachall as specified and directed.

Taking down shutters of any description area not exc. 1.00 sqm each all as specified and directed.

Taking down shutters of any description area exc. 1.00 sqm but n.exc. 2.00 sqm each all as specified and directed.

Taking down shutters of any description area exc. 2.00 sqm each all as specified and directed.

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the styles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

S&F in repairs powder coated aluminium frame/shutters for partition, doors, windows, ventilators etc. including joining cleat for fixing, PVC rollers, locking arrangement, rubber beading, rubber gasket, glazing screws, handles, hinges, tower bolts, lock etc. complete all as specified and directed. Make: JINDAL/HINDALCO/INDALCO. Note :- (i) The rate quoted shall be inclusive of the cost of neoprene beading, glazing pin. screws and powder coated fittings such as hinges, handles, locking arrangement etc as required, which shall not be measured for arriving the weight. (ii) Item shall be paid as per weight of aluminium section. (iii) The rate shall also be inclusive of complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing surface area.

M&L anodized Aluminium grill with and including suitable aluminium anodized 25 to 30 micron E/H section frame, 1.5mm thick as required with aluminium riveted/ screwed attachment complete all as specified and directed. Note :- Aluminium grill shall be of Deco grill of M/s ELESAR FOCCHI Ltd. as per design No. DG 102 , 7.5mm size i.e. 6mm thick and 7.5mm wide or approved design in M/s Royal grill / National grill.

S&F Factory made 35 mm thick 2nd hard wood plain framed panelled shutters (any panel) with lock rail and panel of 9mm thick B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS :1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 2nd class hard wood 35mm thick Glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded, fittted with cut and mitred beads for securing gauge,etc sizes of member of shutter as specified SSR part-I Section 8 clause 8.24 (a) and fitted to chowkhats complete all as specified and directed.

S&F 2nd Class hard wood Glazed and skelton shutter 30mm thick open rebated and prepared to receive glass, gauge etc with sash bars divided into square with plain chamfered or rounded mitred and rebated sash bars any member as in windows ventilator stylles and rails provided as per SSR part -I Sector 8 clause 8.24 (b) complete all as specified and directed.

S&F 2nd class hard wood plain,solid, straight chowkhat and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joint complete all as specified and directed.

Hacking out old broken glass (any thickness, size,quality or description) from wooden frames glazed with putty or fixed with beads including any height of building and scaffolding complete all as specified & directed .

S&F 3mm thick glass sheet glass ordinary quality and glazing with oil putty fixed with beads area n.exc 0.5 sqm in each pane at any height of building and scaffolding complete all as specified & directed.

M&L for 5.50 mm thick sheet glass, ordinary quality and glazing with oil putty or with wooden beading in squares n exc 0.50 sqm in each pane all as specified and directed.

M&L for 5.50 mm thick figured glass/pin head type and glazing with oil putty or with wooden beading in squares n exc 0.50 sqm in each pane all as specified and directed.

S&F 40 mm thick flush shutters, solid core construction, with block board core and ply wood face panels, both faces is covered with decorative face veneer with lipping/frame to match on both side all as specified and directed.

M&L two coats of french polishing on wooden surfaces of any description width or girth including cleaning and prepairing the surfaces including a coat of wood filler on old surfaces all as specified and directed.

M&L for preparation of new wood or wood based surfaces of any description, not otherwise described over 10 cm width or girth and apply two coats of synthetic enamel paint over a coat of pink primer all as specified and directed. .

M&L in repair 18/19 mm thick pre-laminated plywood, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, including 1st class teak wood lipping over cut surfaces, fixed with nails to timber work as in kitchen cup board shutters, shelves and all other similar works all as specified and directed.

S&F stainless steel pressed handles, oval type, designer of 150 mm size for doors all as specified and directed. .

S&F extruded aluminium alloy handles 150 mm, fabricated type, anodized all as specified and directed.

S&F extruded aluminium alloy barrel tower bolts, with bright bolt of size 200 mm for doors. all as specified and directed.

S&F aluminium anodised, barrel tower bolts of extruded section of 150 mm size all as specified and directed.

S&F butt hinges of size 100 mm, medium weight, stainless steel min 3 mm thick for doors of design all as specified and directed.

All as per item No 98 above but of size 75 mm L-type all as specified and directed

S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed of 300 mm size. all as specified and directed.

S&F designer stainless steel drawer handles, projection drop (50mm to 65mm) on screwed plate all as specified and directed.

S&F Hasp and staple safety type stainless steel with steel hinge pin including bolt to hinge plate of 100mm size and fixed with screws all as specified and directed.

S&F in repair brass 7 levers mortice night latch, size 100 mm including safety chain all as specified and directed.

S&F 150 mm size floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor all as specified and directed.

S&F aluminium (extruded section body) door closer hydraulically regulated designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg all as specified and directed.

S&F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples over wooden beading all as specified and directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples over wooden beading all as specified and directed.

S&F in repairs aluminium woven wire mesh sheet cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples and wooden beading all as specified and directed. Note :- Rate inclusive of fixing wire cloth in wooden as well as in aluminium frame.

Supply and fixing in repairs 20mm dia stainless steel decorative type curtain rods chromium plated anodised aluminium all as specified and directed.

S&F in repairs 20 mm dia aluminium anodised powder coated curtain rods and all other connected works all as specified and directed.

Supply and fixing in repairs stainless steel curtain brackets, 20mm dia, decorative/ fancy type, made of brass all as specified and directed

M&L in repair for 25 mm thick block board , interior grade with pre-lminated decorative face veneer on both faces fixed with nails to timber work as in kitchen cup, shelves, board shutters and all other similar works including 1st class teak wood lipping over cut surfaces all as specified and directed.

S&F for 300mm, helical door spring rod pattern springs including roller and roller plate heavy duty and fixed all as per manufacturer's instruction.

S&F in repairs for door bottom sealing strip guard/door gap file/door strip of any colour (minimum wt. 90 gms) fixed all as specified and directed.

Shrikant Enterprises

ASHOK CONSTRUCTION

Frends Enterprises

GANGAJAL

Vandan Enterprises

Bidder Name

Frends Enterprises

SRI SAIRAM COUNSTRUCTION

ASHOK CONSTRUCTION

Vandan Enterprises

GANGAJAL

Shrikant Enterprises