Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.6 LAccepted-AOC | L1 | Accepted-AOC Lowest | |
| 2 | L2₹34.3 L+₹2.7 L (8.65%)Rejected-Finance LANE NO 2 HOUSE NO 3 COL KEHAR SINGH COLONY KHUSROPUR JALANDHAR CANTT JALANDHAR PUNJAB 144005 | JALANDHAR | PUNJAB | 144005 | L2 | Rejected-Finance L2 | |
| 3 | L3₹35.5 L+₹3.9 L (12.3%)Rejected-Finance | L3 | Rejected-Finance L3 | |
| 4 | L4₹36.0 L+₹4.4 L (13.9%)Rejected-Finance | L4 | Rejected-Finance L4 |
Tender Value
₹38.1 L
EMD Value
₹76,200
Closing Date
30 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer (East) Jalandhar Cantt
Garrison Engineer (East) Jalandhar Cantt
SPL REPAIRS TO BLDG. NO P-27 ALONGWITH TOILET (SINGLE JCOs LIVING) OF OTM ACCN OF 52 ENGR REGT AND CERTAIN OTHER SANCTIONED WORK UNDER GE (EAST) JALANDHAR CANTT
2022_MES_555194_4
GE/JULL/ET-61/2022-23
Open Tender
Civil Works
Item Rate
183 days
Jalandhar Cantt
As per tender documents
8 documents required · 8 mandatory
₹500
Garrison Engineer (East) Jalandhar Cantt
₹76,200
Yes
19 May 2023
2 Mar 2023
6 Apr 2023
2 Mar 2023
30 Mar 2023
18 Mar 2023
Amount
Dismantling asbestos cement (corrugated, semi corrugated etc) sheets in roof coverings complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified.
Dismantling timber scantlings 40 sqcm and over in section, in any position, framed work, complete all as specified and directed.
Dismantling wall and ceiling boards (fiber, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.
Demolition of brick work as in walls/ parapet walls removing grass fungus weed, roots of trees completely, grown on roof/ wall surfaces complete all as specified and directed.
Material and labour for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry with 3 kg of cement per sqm complete all as specified and directed.
Demolition of reinforcement cement concrete in ground floor and paving n. exc. 15cm thickness (below or above ground level) complete all as specified and directed.
Taking down cement plaster/ terrazzo cast in situ of any description thickness including racking out joints hacking for key, scrubbing down with water etc. complete all as specified and directed.
Dismantling of RCC batten in roofs, suspended floors, chajjas, landings, etc., any thickness, jointed in any mortar, complete all as specified and directed
Dismantling of brick tiles double layer as in roof covering all as specified and directed.
Demolition of mud in roofs any thickness complete all as specified and directed.
Wire brushing and cleaning top surface of cement concrete (except bitumen), including flashing and junction of parapets etc complete all as specified and directed
Material and labour for brushing neat cement slurry with 3.0 kg of cement per sqm complete all as specified and directed.
Material and labour for cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate as in foundation filling, mass concrete etc, roof padding 50mm thick in average complete all as specified and directed.
Material and labour for bitumen primer for use in waterproofing and damp-proofing treatments @ 0.3 ltr/ Sqm complete all as specified and directed
Material and labour for applying a coat of hot blown paving industrial bitumen 85/25 at the rate of 1.20 kg/ sqm over the roof surface including cleaning surfaces complete all as specified and directed
Material and labour for APP based polymeric membrane minimum weighing 3.60kg/ sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/ sqm) laid on primed surface by forced application complete all as specified and directed
Material and labour for brick tile but except tiles terracing with 40mm thick brick tiles laid over and including 15mm thick screed in cement mortar (1:6) and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement complete all as specified and directed.
Material and labour for brick work with old size sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius and built in cement mortar (1:6) complete all as specified and directed.
All as per Ser item No 19.00 above but except bricks
Material and labour for 12mm thick rendering in cement mortar (1:6) on fair faces of brick wall or concrete surfaces and finishing the surface even and smooth without using extra cement complete a
Material and labour for 15mm thick cement plaster on brick or concrete surfaces in cement mortar (1:4) mixed with integral water proofing compound in the proportion recommended by manufacturer, surfaces finished fair and even complete all as specified and directed. (WPC shall be measured and paid separately under appropriate item of this BOQ).
Material and labour for 5mm thick in cement mortar (1:3) as on ceiling including finishing the surface even and smooth without using extra cement complete all as specified and directed.
Material and labour preparation of new plastered surface of wall and applying three coats of white washing complete all as specified and directed.
Material and labour for preparation of old surfaces of walls including scraping down smoke soots, moulds, moss and trading oil and greasy spots etc including cornices, pilasters etc. on plastered or un-plastered surfaces and applying one coat of white wash complete all as specified.
Material and labour preparation of new plastered surface of ceiling and applying three coats of white washing complete all as specified and directed.
Material and labour for preparation of newly plastered surface of walls and applying two coats of cement base paint complete all as specified and directed.
Material and labour for complete removal of existing treatment from wall surface and applying two coats of cement base paint complete all as specified.
Material and labour for preparation of new plastered or un-plastered surfaces of wall and applying two coats of oil bound distemper over a coat of 1mm thick wall care putty complete all as specified and directed.
Material and labour for complete removal of existing treatment by washing, rubbing down and stopping etc on wall and applying two coat of oil emulsion distemper over a coat of 1mm thick wall care putty complete all as specified.
Dismantling floor, hearth or wall tiling/ china mosaic including cement mortar bedding (but not backing), removing rubbish off outside MD land complete all as specified and directed.
Material and labour for 25mm thick cement concrete (1:2:4) type B-0 using 12.5mm graded aggregate and finishing the surface fair and even to receive the top layer complete all as specified and directed.
Material and labour non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exc. 0.11 Sqm but not exceeding 0.18 Sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 20mm thick screed bed or bedding layer in cement mortar (1:6) for laying floor finishes complete all as specified and directed.
Material and labour for coloured glazed tiles area of each tile exceeding 0.18 sqm but not exceeding 0.72 Sqm fixed with neat cement slurry in vertical surface to wall pointing in coloured cement to match over and including 10mm thick rendering CM (1:4) complete all as specified and directed
Material and labour for non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exc. 0.18 Sqm but not exceeding 0.38 Sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 20mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed.
All as per item No 35.00 but in skirting/ dado laid over and including 15mm thick rendering in cement mortar (1:4) as backing coat.
Material and labour for Granite (of any type) work 20mm thick machine cut (table rubbed and polished) in steps jambs, pillars, window cills, cooking platforms, shelves in cupboard, hand wash places and like including necessary cutting and grooving to walls and making good including 10mm thick in cement mortar (1:4) screed bed or bedding layer and pointing with cement mortar (1:2) with admixture of pigment to match with shade of granite and including screed bed/ plaster layer 15mm thick in CM (1:6) complete all as specified and directed.
Material and labour reinforced cement concrete nominal mix in (1:2:4) type B-1 (using 20mm graded stone aggregate) as in beams, cantilevers, bressummers, lintel over 1.5m span complete all as specified and directed.
Material and labour reinforced cement concrete nominal mix in (1:2:4) type B-1 (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landing, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
Use and waste of Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed
Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work n. exc. 200mm thick (Horizontal or sloping) for flat & rough finished surfaces of concrete complete all as specified and directed.
Material and labour for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.
Material and labour for mild steel TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.
Excavating in post holes (or similar holes) each n.exc 0.5 cum in soft/ loose soil, getting out, returning, filling in, watering and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm and removing surplus soil to a distance n.exc 50m and making good surfaces complete all as specified and directed.
Material and labour PCC (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) as in foundation filling, post holes, mass concrete, surface channels, drains and other similar works complete all as specified and directed.
Supply and fixing rolled mild steel work roof trussed (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, Tee, Angle, Channel or Flat Sections) including distance pieces, cleats etc, Fe-410-W (Gde E-250) complete all as specified and directed.
Supply and fixing rolled section as in main and cross beams, hip and jack rafter, purlins, connected to common rafters, fixed with cleats and plates etc conforming to Fe-410-W (Gde-E-250), Quality 'A' including one shop coat of zinc chromate primer paint including preparation of surface before fabrication all as specified and directed.
Supply and fixing plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment of Fe-410-W Gde-E-250 quality 'A' complete all as specified and directed
Supply and fixing mild steel screw bolts diameter of neck 11 to 15mm (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc. 5cm but n.exc 10cm long complete all as specified and directed.
Supply and fixing Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed
Supply and fixing Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed
Material and labour for PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands plinth courses, roof kerbs or mud stops, benching, coping, bed plates, parapets, water through and the like etc including weathering, slightly rounded or chamfered angles throating, edges of interlocking/ chequered tiles etc complete including necessary form work complete all as specified and directed Note : Reinforcement where provided shall be measured & paid separately
Material and labour for cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate as in benching, padding, roof kerbs or mud stops, coping etc rounded or chamfered on edges complete all as specified and directed
Supply and fixing false ceiling with Everest fibre cement designer tile ivory painted (high pressure steam cured) of 4mm thickness (as per IS : 14862) of size 595 x 595mm and any one of the design (oceanic, lake & hill, cascade or electra) in true horizontal level, suspended on interlocking meta grid of hot dipped galvanized steel sections (galvanized @ 120 gms, both side inclusive) consisting of main ‘T’ runner with suitably spaced joints to get required length and 15 x 32mm made from 0.3mm thick sheet and cross ‘T’ of size 15 x 32mm made of 0.30mm sheet, spaced between main ‘T’ at 600mm c/c to form a grid of 600 x 600mm and wall angle of size 15 x 20mm made of 0.30mm thick sheet and laying false ceiling tiles in the grid including, required cutting/ making, opening for services like diffusers, grills, light fitting, fixtures, smoke detectors etc. main ‘T’ runners to be suspended from ceiling using GI soffit cleats fixed to existing rafter, purlin, etc with dash fasteners, GI adjustable rods of 3mm dia with galvanized butterfly level clips, spaced at 1200mm c/c along main ‘T’ bottom exposed width of 15mm of all T-sections shall be center black pre-painted with polyester paint and having a load bearing capacity of 12 Kg/ Sqm complete all as specified and directed
Supply and fixing PVC wall lining 5mm thick consisting of hollow section wood grain/ any colour printed PVC sheet used instead of plain colour sheet inclusive of solvent cement, screws, feathered at the edge shall be stuck at wall joints/ pillars and top etc., as specification and drawing and manufacturer instruction, complete all as specified and directed
Taking down chowkhats or frame with shutter (without taking off shutter from the frame) area n. exc. 1.5 Sqm each for doors and windows complete all as specified and directed.
Taking down chowkhats or frame with shutter (without taking off shutter from the frame) area exc. 1.5 Sqm but n. exc. 4 sqm each for doors and windows complete all as specified and directed.
Supply and fixing pressed steel door frame of size 165mm x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed
Supply and fixing factory made 40mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides including 40 x 6mm thick 2nd class hard wood lipping on edge complete all as specified and directed.
Material and labour for 35mm thick 2nd class hard wood factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in clause 8.24 (a) of SSR Part-I; supplied and fitted to chowkhats complete all as specified and directed.
Supply and fixing solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.
Supply and fixing factory made solid panel PVC door shutters 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site, complete all as specified and directed.
Supply and fixing 100mm size PTMT butt hinges fixed complete all as specified and directed
Supply and fixing 200mm size PTMT tower bolt fixed with machine screws complete all as specified and directed.
Supply and fixing MS 150mm size PTMT bow handle fixed with machine screws complete all as specified and directed.
Material and labour mild steel sliding door bolts 300mm long stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.
Supply and fixing MS barrel tower bolt 200mm long stove enameled black with bright bolt and fixed complete all as specified and directed.
Supply and fixing mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate welded to steel frame/ screwed to wooden frame complete all as specified and directed.
Supply and fixing floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor overall length of cover plate 140mm complete all as specified.
Supply and fixing 125mm size mild steel butt hinges, medium weight, cold rolled and fixed with screws/welded to frame complete all as specified and directed.
Supply and fixing MS pressed handles, oval type, stove enameled black 150mm size complete all as specified and directed.
Supply and fixing steel window (combination) with glazed shutter as well as gauged shutter with side hung/ top hung shutters including box type hinges, steel peg stay, handle & locking arrangement and frame made out of 1.25mm thick pressed steel frame including guard bars, hold fast, tower bolt and handles & flat iron etc and necessary cooler arrangement in window and fixed with PCC (1:2:4) type B-1 (using 20mm graded stone aggregate), complete as per Drg No. CEJZ/WD-1655/22 and CEJZ/TD-1019/08 sheet No. 1/3 to 3/3. Note : The above rate for glazed and gauged shutter window and measured one time clear opening for payment of window
Supply and fixing steel ventilator (combination) with glazed shutter as well as gauged shutter with side hung/ top hung shutters including box type hinges, steel peg stay, handle & locking arrangement and frame made out of 1.25mm thick pressed steel frame including guard bars, hold fast, tower bolt and handles & flat iron etc and fixed with PCC (1:2:4) type B-1 (using 20mm graded stone aggregate), complete as per Drg No. CEJZ/WD-1655/22 and CEJZ/TD-1019/08 sheet No. 1/3 to 3/3. Note : The above rate for glazed and gauged shutter ventilator and measured one time clear opening for payment of ventilator
Material and labour for cutting holes into for through brick wall exc. 150 sqcm but n. exc. 400 sqcm built in cement mortar and making good in cement mortar (1:3) or concrete (1:2:4) type B-1 complete all as specified and directed
Material and labour for 3mm thick sheet glass ordinary quality and glazing with oil putty in squares n. exc. 0.50 Sqm in each pane complete all as specified and directed.
Supply and fixing stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.
Material and labour in repair 25mm dia powder coated mild steel curtain rod, fixed with & including MS powder coated hooks/ brackets and decorative finials (at both side), shade as approved by GE complete all as specified including fixing of long size rawl plugs in wall for MS hook fixed complete all as specified and directed.
Material and labour for preparation of new wood and wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Material and labour for preparation of new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Taking up or down 15mm bore steel tubing and connections complete all as specified and directed.
Taking up or down 20mm bore steel tubing and connections complete all as specified and directed.
Material and labour for 15mm bore galvanised steel tubes, medium grade with & including all fittings fixed to wall, ceilings and or laid in floors etc complete all as specified and directed.
Material and labour for 20mm bore galvanised steel tubes, medium grade with & including all fittings fixed to wall, ceilings and or laid in floors etc complete all as specified and directed.
Material and labour re-fixing old tubing 15mm bore with necessary connection including new fittings, in new or old position in wall, ceiling and floor complete all as specified and directed.
Material and labour re-fixing old tubing 20mm bore with necessary connection including new fittings, in new or old position in wall, ceiling and floor complete all as specified and directed.
Supply and fixing in repair Bib Cock long body (Foam Flow) with Flange, suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed
Supply and fixing in repair single lever basin mixer with popup waste suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed
Supply and fixing in repair two way wall diverter with SS cover plate and all connected accessories, suitable for fixing to 15mm bore (dia) GI pipe, complete as all specified and as directed
Supply and fixing vitreous china white wash down water closet pan with 'P' Trap and fixing bolts (excluding flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe, etc. and making good to floor/ disturbed surfaces including dismantling the existing unserviceable water closet complete all as specified and directed
Supply and fixing hand shower (health faucet) 1.00mtr long flexible tube & wall hook suitable for 15mm dia for iron pipe or for brass ferrule all as specified & directed
Supply and fixing Jet spray with holder for EWC 1.5mtr long suitable for 15mm dia for iron pipe or for brass ferrule all as specified & directed
Supply and fixing in repair angular stop Cock with Wall Flange suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed
Supply and fixing 20mm gun metal globe or gate valve, with iron wheel head screwed both ends for iron pipe and fixed in repairs complete all as specified
Supply and fixing vitreous china squatting pan Orissa pattern size 580 x 440 mm white with front or back inlet, integral foot rest including CI 'P' or 'S' trap with providing lime concrete bedding and connecting to flushing cistern complete including breaking up existing damaged WC seat and connecting flush pipe etc and make good to floor fixed in repairs complete all as specified.
Supply and fixing vitreous china wash hand basin of size 590mm x 420mm x 195mm oval type complete all as specified and directed.
Supply and fixing in repair vitreous china bowl urinal, half stall, white complete including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2) securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, including and fixing of flush pipe, grating with waste coupling and union for discharge pipe, waste pipe, spreader etc, size of urinal 59cm x 39cm x 37.5cm complete all as specified and directed.
Supply and fixing PVC connection 15mm bore size with PTMT nuts of length 450mm fixed in repair complete all as specified and directed.
Supply and fixing flexible PVC waste pipe of approved quality 25mm bore, 75cm long with one end socketed fixed to waste coupling including one PVC reducer 25mm complete all as specified and directed
Supply and fixing PVC white low level flushing cistern 10 litre capacity with all fittings syphonic action with top push type button with inlet ball valve and float including flush pipe, ball valve, handle, PVC short bend etc. fixed on existing brackets fixed in repairs complete all as specified and directed.
Supply and fixing in repair mild steel CP grating 125mm dia circular shaped and fixing with cement mortar (1:3) on Nahani Trap or floor trap complete all as specified and directed.
Supply and fixing in repairs SS soap dish and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed
Supply and fixing peg set of 5 of PTMT fixed to rear side of door shutter in bath complete all as specified and directed.
Supply and fixing brass chromium plated tubular towel rail 20mm dia, ‘D’ type, 600mm long between flanges fixed in repairs complete all as specified and directed.
Supply and fixing in repair Over Head Shower square wall shower (Adjustable) of size (6”x6”) including all fittings and suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed
Material and labour for 75mm PVC (SWR) floor trap plain with grating including jointing to waste pipe fixed with solvent cement fixed in repairs complete all as specified and directed.
Taking down eaves gutters and rainwater pipes/ sewage pipe (any size or pattern) including all fittings, heads, shoes, bends, swan necks etc., complete all as specified.
Supply and fixing PVC (SWR) rain water pipes single socketed in any length with rubber ring joints laid in floors 110 mm bore complete all as specified and directed.
Supply and fixing PVC (SWR) rain water pipes single socketed in any length with rubber ring joints laid in floors 75 mm bore complete all as specified and directed.
Supply and fixing PVC (SWR) bends any radius 110mm bore all as specified and directed.
Supply and fixing PVC (SWR) bends any radius 75mm bore all as specified and directed.
Supply and fixing PVC (SWR) junction single (Single T) 110mm bore, equal or unequal complete all as specified
Supply and fixing PVC (SWR) junction single (Single T) 75mm bore, equal or unequal complete all as specified
Supply and fixing PVC (SWR) vent cowl 75mm bore all as specified and directed.
Supply and fixing rotational moulded polyethylene water storage tanks, 1000 litres capacity, (cylindrical vertical with closed top), ISI marked, hoisted and fixed in position all as specified in SSR Part I, fixed in position including dismantling of existing tank of any description all as specified and directed.
Supply and fixing 20mm bore ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight 210 gms) complete all as specified and directed.
Material and labour for 125 x 110mm PVC (SWR) gully trap setting and jointing with solvent cement fixed in repairs complete all as specified and directed.
Material and labour for durastone vitrified tiles 400 x 400 x 10 to 12mm thick in floor, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the colour of tiles over 20mm thick screed bed or bedding in cement mortar (1:6) complete all as specified and directed
Cutting opening in cement concrete walls (any description) for door, window and other openings (with or without reveals) or enlarging existing openings, including trimming surfaces to receive rendering, etc. complete all as specified and directed
Material and labour cutting chases, pinning in, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sun shades, shelves, lintels etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting n.exc 10cm girth in brick walls complete all as specified and directed.
Taking down carefully existing point wiring of any type/ any size (ie on wooden/ batten, surface conduit, casing capping or concealed conduit) complete for light, fan socket or power point etc including removing switches, sockets, holders, ceiling rose, pendants, regulators, light fittings, switch board outlets with sheets and other materials from site for refixing of serviceable light and for taking credit of unserviceable light as per Sch of credit and making good disturbed surface walls, roof, floors etc with any type of civil work involved complete all as specified and directed
Material and labour for point wiring with 1.5 sqmm (nominal area), 1100 volt grade PVC insulated FRLS type multi stranded copper conductor cable drawn in and including concealed rigid PVC conduit medium grade (ISI marked) not less than 20mm dia with accessories including cutting chases for laying of conduit/ fixing of boxes in walls/ floors etc including making good to disturbed surfaces as per adjoining specification and terminated in concealed terminal boxes including MS concealed terminal boxes with plastic laminated bakelite sheet top cover 3mm thick make hylum or equivalent fixed with nickel polished screws with washers and earth continuity PVC insulated FRLS type cable with stranded copper conductor of size 1.5 sqmm (nominal area) green colour as earth wire connected with earth dolly for one light point controlled by one switch complete all as specified and as directed.
All as per srl item No 121.00 here-in-before but One fan point controlled by one switch
All as per srl item No 121.00 here-in-before but one socket outlet 5 Amp controlled by one switch on independent board.
All as per srl item No 121.00 here-in-before but one socket outlet 5 Amp controlled by one switch on same board.
All as per srl item No 121.00 here-in-before but with 2.5 Sqmm (nominal area) PVC stranded copper conductor cable 3 pin 15 Amp socket outlet with 2.5 Sqmm PVC insulated with stranded copper conductor cable for continuous earth continuity conductor independent board complete all as specified and directed.
All as per srl item No 121.00 here-in-before but with 4 Sqmm (nominal area) PVC stranded copper conductor cable 3 pin 15 Amp socket outlet with 4 Sqmm PVC insulated with stranded copper conductor cable for continuous earth continuity conductor independent board complete all as specified and directed.
Supply and fixing switch piano flush type, 5 Amps, 240 Volt AC single pole, one way complete all as specified.
Supply and fixing switch piano flush type, 15 Amps, 240 Volt AC single pole, one way complete all as specified.
Supply and fixing socket out let 5 Amp, 5 pin flush type complete all as specified.
Supply and fixing socket outlet multipurpose 2 in 1, 5/6 pin, 5 & 15 Amps, flush type complete all as specified
Supply and fixing LED retrofit lamp 9W, 6500K, 220-240V, B-22 base cap complete all as specified and directed.
Supply and fixing ceiling rose surface type bakelite 65 x 50mm three terminal complete all as specified.
Supply and fixing five step fan regulator, electronic type, single phase, including connecting complete all as specified and directed.
Supply and fixing batten holder ISI marked insulated body complete all as specified.
Supply and fixing Deco Ultra Slim linear LED lighting fixture with co-extruded polycarbonate body environmental friendly energy efficient ready to use pack 20W LED 6500K with square decorative end caps complete all as specified and directed
Supply and fixing Deco Ultra Slim linear LED lighting fixture with co-extruded polycarbonate body environmental friendly energy efficient ready to use pack 9W LED 6500K with square decorative end caps complete all as specified and directed
Material and labour for sub main wiring with one run of FRLS PVC insulated unsheathed multi-stranded copper conductor single core 6 sqmm drawn through in and including PVC rigid non-metallic surface or concealed conduit as earth continuity conductor with green insulation complete all as specified and directed
Material and labour for Sub main wiring with PVC insulated cable copper conductor FRLS two single core 6 Sqmm drawn through PVC rigid non metallic conduit medium grade with all fittings including earth continuity FRLS copper conductor 6 Sqmm PVC insulated with green insulation complete all as specified. Note : Two runs of single core 6 sqmm and one run of 6 sqmm PVC insulated stranded copper conductor through PVC rigid concealed conduit shall be measured as one RM.
Material and labour for Sub main wiring with PVC insulated cable copper conductor FRLS two single core 10 Sqmm drawn through PVC rigid non metallic conduit medium grade with all fittings including earth continuity FRLS copper conductor 10 Sqmm PVC insulated with green insulation complete all as specified. Note : Two runs of single core 10 sqmm and one run of 10 sqmm PVC insulated stranded copper conductor through PVC rigid concealed conduit shall be measured as one RM.
Material and labour for sheet metal enclosure DBs when MCBs to be used, SPN 8 ways 240 V, with copper bus bar, double door, epoxy/ powder coated inside and outside with earth bar and neutral bar, prewired complete all as specified.
Supply and fixing MCB SP 6 to 32 Amps, B-curve, 10 KA complete all as specified and directed.
Supply and fixing MCB SPN 32 Amps, B-curve, 10 KA complete all as specified and directed.
Supply and fixing energy saving & environmental friendly long life versalite pressure di-cast aluminium luminaire with heat resistant glass and suitable optics for uniform distribution of light 35 watt LED for bldg security lights with high efficiently electronic driver, having IP-66 protection, surge protection min 2 KV power factor more than 0.9 complete operative on AC supply 140 volts to 270 volts pre-wired and product should be made in India qty including bracket made out of GI pipe 25mm dia bent to shape and clamps 40 x 6mm with nuts and bolts prewired products must be made in India only connection and testing complete all as specified. Note: (i) Contractor shall be provided 2 years written manufacture's guarantee for the LED fixture complete including driver from the certified date of completion. (ii) Contractor shall be produce LM-79 & LM-80 report of NABL accredited laboratory from manufacturer's
Taking down and refixing ceiling fan of any sweep or make, filling cavities with filler one coat after cleaning, painting the complete fan (as per previous colour) using synthetic enamel paint by spraying including replacement of flexible wire, rubber reel, nut, bolts etc. and re-fixing in original position complete all as specified and directed.
Supply and fixing vertical load-line DB 4 way with bus bars, neutral links, blanking plates suitable for fixing of 100A MCCB as incomer and MCB for outgoing fixing in wall complete all as specified and directed.
Supply and fixing MCCB FP 100 Amp, 415V with adjustable type, with breaking capacity 36 KA suitable for vertical load-line DB complete all as specified and directed
Supply, laying, jointing and testing XLPE insulated, PVC sheathed , steel strip or wire armoured electric cable 1100 volt grade (heavy duty) with stranded aluminium conductor of size 16 Sqmm, 4 core laid in trenches, in floor, in duct, through pipes/ culvert or along the pole/wall complete all as specified and directed
Excavation in trenches in hard/ dense soil not exceeding 1.5 m wide and not exceeding 1.5 m in depth for laying of cables, erecting poles, stay assembly etc. and getting out complete all as specified.
Returning filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick each layer complete all as specified and directed..
Removing excavated soil to a distance n.exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.
Supply & laying old size sub class 'B' bricks laid flat in trenches over the cable with the length of brick perpendicular to the direction of cable length complete all as specified and directed
Material and labour for sand cushioning with 8cm thick layer of sand before laying of cable and 15cm thick after laying of cable in trenches complete all as specified and directed
Supply and fixing 50mm bore galvanised pipe light grade fixed along poles/ to walls/ laid under floor complete with and including fittings and clamps as required complete all as specified and directed.
Material and labour for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less 1.5 mtr deep below normal ground level connected to galvanised earth lead wire 4 mm dia by means of nut, bolts, check nut & washer of galvanized iron and GI lead protected with protection pipe of GI light grade 15mm dia with thickness of not less than 15cm in alternate layers of charcoal and salt on all sides of earth plate with funnel with wire mesh and watering pipe 20mm bore of GI medium grade all as shown in electrical plate No 3 of SSR Part-I 2009 connected to earthing test point all as specified and directed and testing on completion including PCC (1:3:6) type C-1 cover and frame, excavation and earth work and testing etc complete all as specified. Note : On testing, after completion of job, if desired earth resistance is not obtained the earthing shall be redone by the contractor without any extra coat to the department
Maintenance free safe earthing system complete with 01 Number UL 467 approved/ CPRI tested copper bonded (earth rod with 250 microns of copper cladding) earth rod 17.2mm dia 3000mm long electrode buried in ground to bore holes 120mm dia, vertically to a depth not less than 3.50 mtr deep below ground level with top edge of earth electrode at a depth not less than 500mm below normal ground level, provision of copper bus bar of size 200mm x 25mm x 6mm for inter connection with copper earth lead strip 25mm x 3mm and further connected to test point terminal block all as directed. Each earth pit shall include minimum 50 Kg (two bags of 25 Kg each) NABL lab certified back fill compound and 6 Kg (tow container of 3 Kg each) NABL lab certified conductive gel (LOHM-EG-03) compound for filling bore holes with mother soil mixed in 1:3 ratio (one part of back fill compound and three parts of mother soil), so as to achieve earth resistance below 1 Ohm including excavation of polypit chamber with polyplastic pit cover (cost of polypit chamber with polyplastic pit cover shall be deemed to be included in the rate quoted) complete all as specified and directed by Engineer-in-Charge. Notes : (a) Copper strip beyond test point shall be measured and paid separately. (b) Earthing resistance result shall be less than 1Ω. If the result comes more than 1Ω, the contractor shall carry out the earthing at separate location/ site given by the Engineer-in-Charge after taking out of earth electrode without any extra cost to the deptt.
(c) Contractor shall give guarantee of minimum 5 years for the earthing carried out by him. (d) Contractor shall submit the purchase vouchers of material purchased and undertaking obtained from the agency executing the earthing certifying that the earthings have been provided by them for the entire quantity of earthings. (e) The rate quoted is inclusive of test point made of phosphorous bronze of size 75 x 75 x 25mm, drilled and screwed including 3 Nos 8mm dia 25mm long brass nuts and bolts complete all as directed. (f) The contractor’s quoted rates shall be deemed to include for dismantling/ taking down of old unserviceable earthing of any type and making good the disturbed surfaces and nothing extra shall be admissible on this account. (g) Guarantee money : An amount equal to 5% of the quoted amount against earthing catered under item No. 155 of BOQ will be retained till satisfactory complete of performance guarantee period of five years. Contractor can give BGB or interest bearing deposit receipt from any nationalized/ scheduled bank for the amount failing which the said mount shall be deducted from final RAR/ Final Bill of contractor. (h) Any other fittings/ fixtures if technically required for achieving desired results (if not included above) shall be provided by the contractor without any extra cost to the Govt.
Material and labour earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/ pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 20x3mm dia copper strip complete all as specified and directed.
Supply and fixing white cover plate with frame, 3 module complete all as specified and directed
Supply and fixing white cover plate with frame, 6 module complete all as specified and directed
Supply and fixing white flush box, 3 module complete all as specified and directed
Supply and fixing white flush box, 6 module complete all as specified and directed
Supply and fixing white modular switch 6 Amps 250V AC one way one module complete all as specified and directed
Supply and fixing white modular switch 16 Amps 250V AC one way one module complete all as specified and directed
Supply and fixing white modular socket 6 Amps 250V AC, 2-in-1 socket with shutter combined two module complete all as specified and directed
Supply and fixing white modular socket 6/16 Amps 250V AC, twin socket combined two module complete all as specified and directed
Supply and fixing white modular fan regulator, 250 V AC step type 5 steps two module including taking down existing fan regulator complete all as specified and directed.
Supply and fixing energy saving LED batten with diffuser comprising with aluminium housing, 4 ft, 20 watt, 6500K, power factor more than 0.95, IP-20 Class-I protection with inbuilt LED driver, surge protection upto 2.5 KV, operative on 140-270 Volt AC, complete prewired, connection and testing complete all as specified and directed
M/s SUDHIR KUMAR
SANDEEP JHANJI CONSTRUCTIONS
Motorway Constructions
Bidder Name
M/s Sanjiv Kumar
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .