Construction of Land Development at seed Multiplication Farm at Thiksay

Amount

Earth work in excavation by manual means over areas(Exceeding 30 em and upto 1.5 mtr in depth, 1.5 mtr inwidth as well as 10 sqm. on plan) including disposal ofexcavated earth upto 1 mtr from cutting edge, disposed earth to be leveled and neatly dressed in :

Random Rubble masonry with ~ard stone from qyarry in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement: 6 coarse sand: 12 graded stone aggregate 20mm nominal size) upto plinth level with

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering- All work upto plinth level. 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size)

Providing and fixing upto floor five level precast cementconcrete solid blocks including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering and complete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size)

15mm Cement plaster on the rough side of single or half brick wall of mix:

Distempering with oil bound washable distemper ofapproved brand and manufacture to give an even shade. 14.47.1 Old work (one or more coats)

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in requirecolour and pattern over and including 50mm thickcompacted bed of coarse sand, filling the joints with coarse sand etc. all complete as per direction of

Providing and laying in position cement concrete ofspecified grade excluding the cost of centring andshuttering- All work upto plinth level(crushed )1:2:4 (1 cement: 2 coarse sand: 4 gradedstone aggregate 40mm nominal size)

Providing and laying local Tradition ornamental shinksakh including polishing.

Providing corrugated G. S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G. I limpet washers or with G. I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape whereever required. 0.63mm thick with zinc coating not less than 27

Supply and installation of solar light with following conditions i) Recommended light level for public area with dark surroundings 20-25 lux i.e lumens/m2. ii)Solar street lightening system type integrated including single LED luminaries battery solar panel charge controllers ,sensors, pole fixing and mounting accessories . iii)Luminaries mounty height for recommended light level ie., pole height 6mtrs. iv) Lay out for solar street light installations single side or staggered sided. v) Recommended distance between street light 25mtrs. vi) Type of luminarie LED vii)Recommended wattage of luminare for recommended light level 25W-30W design100 luminaire . viii) Lumen cut put at source 3000 lumins. ix) Battery type n capacity lithumion integrated with luminaire 30 AH or higher . x) Solar panel capacity 75W or for luminaire capacity. xi) Solar charge controller ratting 5A or as per capacity. xii) Pole specification mild steel pole with weather proof coating . xiii) Recommended sensors dush to dawn sensor and dimming . xiv) Working temperature -25degree C-To 60 degree C xv) Civil works earth work and cement concrete in 1:2:4mix (1 cement :2 coarse sand 4 stone 20 mm nominal size) (number of street lightening system be installed at various places )

M/S TSERING SANGROP GOVT CONTRACTOR