Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹99.2 LAccepted-AOC 143 INDUSTRIAL AREA PHASE 2 PANCHKULA HARYANA | PANCHKULA | PANCHKULA | HARYANA | L-1 | Accepted-AOC ok | |
| 2 | L-2₹1.1 Cr+₹15.3 L (15.5%)Rejected-Finance | L-2 | Rejected-Finance ok | |
| 3 | Rejected-Technical PLOT NO 1 NR SHIVBHUMI IND PARK 2 SAUNDARYA INDUSTRIAL PARK BAKROL TO KUNJAD ROAD BAKROL BUJARANG VILLAGE AHMEDABAD GUJARAT 382430 | AHMADABAD | GUJARAT | 382430 | - | Rejected-Technical Non Responsive |
Tender Value
Refer Docs
EMD Value
₹2.1 L
Closing Date
3 Jul 2023, 2:00 pmClosed
Executive Engineer, W.S. Mech. Division, Rewari
Executive Engineer, W.S. Mech. Division, Rewari
Supply, erection and commissioning of 1 No. 15 Ton EOT Crane and 1 No. 10 Ton Gantry Hoist at Pump House JF-1
2023_HRY_289533_5
1637/6-A dated 07.06.2023
Open Tender
Pumps/Motors
Works
150 days
Executive Engineer, W.S. Mech. Division
Please refer Tender documents.
2 documents required · 2 mandatory
₹15,000
Yes
₹2.1 L
Yes
20 Sept 2023
10 Jun 2023
3 Jul 2023
10 Jun 2023
3 Jul 2023
10 Jun 2023
Amount
Supply, Erection & Commissioning of new EOT crane capacity 15 ton in addition to existing EOT having 6 directional moment (HT, LT, CT) with new double girders structure and existing rail tracks along with all accessories such as electric panel, gear box, electric motors, pendant control, wire and cables fitted along the moment of crane, drum, brake system, anti collission system, base plates, end carriages and repair /alignment of existing rail with the fastener concreting plastering etc in all respect as per site requirement small items such as nut bolt, screws, washers, complete painting of EOT crane (with two coats of zinc chromate primer followed by two coats of golden yellow synthetic enamel paint) along with all accessories including gantry rail, span girder of existing crane, testing of complete EOT on load and any other leftover items. The specifications are as follows :- 1) Capacity: 15 Ton 2) Lift: 40ft, Span (CT):31ft approx, Long Travel (LT):380ft approx 3) Hoisting Speed=2 to 3mtr/min, CT and LT speed =5 to 6mtr/min 4) Motors : ABB, Crompton, Marathon, BCH, BBL (Crane duty, Squirrel cage) 5) Gears- Splash lubricated, enclosed, gears of EN-8 supported on ball bearings 6) Panel- Complete Panel and components (IP-54) 7) Class – 2 (Indoor) 8) Brake – Double braking system - DCEM DD Brake/EHT 9) Contactors – Schneider / L&T/BCH 10) Wire rope – 20 mm , fiber core 6 falls ( Usha Martin/ Mahadev)- crane/hoist grade 11) Operation – Floor level with Pendent 12) Power Supply- 415V, 3 Ph 13) Limit switch - Main hoist -Geared Rotary type & Gravity type, Cross travel - Two-way lever type. 14) "C" type Hook is of heavy duty forged steel capable to withstand shock loads & free to swipe & rotate
Designing, Supply, Erection & Commissioning of DSL /Festooning system grouted to the wall along with its main switches, limit switches and resistance arrangement with clippers complete Kit in Span (CT):31ft approx, Long Travel (LT):380ft approx complete in the P/house upto the main supply by adding angle, channel, aux. Plates, hooks, slings, stays and GI wire rope for 15 Ton EOT crane.
Overhauling of existing EOT crane capacity 15 ton by replacing braking system, control wiring, contactors, control relays, limit switches, cables, motor bearings, crane bearings and other unforseen items/repairs required for its proper functioning/operation complete in all respect as per site requirement. All the components as per approved specification of deptt.
Designing, Supply, Erection and commissioning of single girder wire rope electric hoist (up, down & cross movement) of 10 ton capacity with its frame to stand on the piers of the bays (trashracks) outside the building of the pump house. The electric hoist must be provided with proper canopy to protect it from water and dust. Electricity points inside the pump house must be provided through out the pump house from where electricity suppy may be given to this hoist. The other specs are same: - controlled by radio/wireless remote control, supply 415 V/ 03 Phase/50 Hz and can work in 50° C ambient temperature, having 30ft lift for a span of 400ft approx with suitable size fibre core wire rope to handle the hoist operation , gears of EN-8 supported on ball bearings, hook is of heavy duty forged steel capable to withstand shock loads & free to swipe & rotate, with control panel, cables & motors of suitable sizes complete in all respect as per IS 3177.
Designing, Supply, Erection and commissioning of rails and I-beams of required size to carry the load of electric hoist (10ton mentioned at Sr no 4), its frame, load of trash racks, self weight. These rails and beams are to fixed on the piers of the bays, outside the building, along the total length of the pump house (400ft). So that hoist can be used to carry trashracks from one end of pump house to other end and to lift and lower trash rack from any end of pump house to any bay.
The above rates are inclusive of all kind of taxes including GST and other expences like F.O.R. destination and inclusive of all incidental charges, enroute & at destination. Nothing extra shall be paid separately. Terms & Conditions as mentioned in Bid document in Price Schedule.
WESTWORK SALES CORPORATION
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .