8151 CONSTRUCTION OF SECURITY WATCH TOWER AT CRUISER WHARF KNUCLE OF NAVAL DOCKYARD ADDTN ALTN AND SPECIAL REPAIRS TO MES COMPLEX AND DRIVERS REST ROOM AT HQ WNC COMMAND POST BLDG NO P22 ADDTN/ALTN OF WASH ROOM OF CQAE NS MUMBAI 8TH FLOOR OF NMRL BU

Amount

Demolition of brick work/stone masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles including coping complete all as specified and directed.

M&L brick work with sub class 'B' bricks old size, straight or curved on plan exc 6m mean radius in cement mortar 1:4 complete all as specified and directed.

M & L for brick work with sub class 'B' bricks (old Size) straight or curved on plan exc 6 m mean radius and built in CM (1:6)but half brick thick wall built in CM 1:4 complete all as specified and directed.

Demolition of cement concrete in ground floor and paving not exceeding 15cm thick below or above ground level un re-inforced complete all as specified and directed.

M&L for PCC of type D2, 1:4:8 using (40mm graded stone aggregate) 100mm thick as in sub base complete all as specified and directed.

M&L for 40 mm thick PCC 1:2:4 type B0 using 12.5mm graded aggregate as in floor finished even and fair complete all as specified and directed.

Taking down chowkats or frames exc 1.5sqm but n.exc 4 sqm each but with shutter (without taking off shutter from the frame) complete all as specified and as directed

All as per Item No. 07 above but n.exc 1.5 sqm complete all as specified and as directed

S&F solid PVC door frame of size 50mmx 47mm made out of 5mm wood grains printed PVC sheet reinforced with ms square tube and edges painted to match with printed sheet complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (styled) consisting of frame made out of MS tube for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ,C" channel having a PVC sheet strip of 20mm width stuck in side with salvent cemet for stiles and plain colour PVC sheet for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet bedding and jointed together with solvent cement suppling and fixing in the frame at site complete all as specified and directed.

S&F 150mm long Aluminium anodized handle of extruded sections etc complete all as specified and directed.

S & F 100 mm medium weight Mild Steel Butt hinges to the frame etc complete all as specified and directed.

S&F 200mm long aluminium anodized barrel tower bolts of extruded sections complete all as specified and directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed. .

M & L for Anodised aluminium snap grid frame work for false ceiling of grid size 605X605 mm with Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm etc complete all as specified all as specified

S & F Powder coated aluminium frame for doors, windows, ventilators and partitions with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F in repair 12 mm thick Prelaminated medium density fibre board both side decorative lamination interior grade, fixed in aluminium/wooden frame work complete all as specified and directed.

M & L for MS flat for hold fast. Conforming to Fe-290-0 or Fe-165 complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. .

M & L for Non skid coloured ceramic tiles 7 to 8 mm thick ( square/ rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of the tiles with and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M & L for Coloured glazed ceramic tiles in vertical surface 350 X 250 X 7mm/ 450 x 350 x 7mm thick, set and jointed in neat cement paste and pointed in coloured cement to match the shade of the tiles with and including 10 mm thick backing coat in CM 1:3 complete all as specified and directed.

M&L light shade vitrified ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match in floor including 20mm thick screed bed or bedding layer for laying floor finishes in CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. Note : GE shall approve sample from latest catalouge.

Taking down cement plaster on brick walls or stone walls etc including raking out joint, hacking for key, scrubbing down with water etc including removing debries directed for a distance max upto 500m complete all as specified.

M&L Plastering 15mm thick in CM 1:6 on brick/ concrete surfaces, finished with Neeru finish on walls complete all as specified and as directed .

M&L for rendering 20 mm thick pre polymer modified ready mixed cement based plaster in two coats 12 mm thick base coat and 8 mm thick finishing/final coat. Polymer modified ready mixed cement based plaster should having minimum composition of cement & sand 1:4 using fully treated dry, well graded natural sand conforming to IS-383 suitable for external plastering having low rebound properties, low water demand for curing properties, mechnical mixing with water in a matalic tray only to made good, consistency as per the specification of the manufacturer and applied over exterior masonry and concrete surfaces incl using richer mix for making corners if necessary incl making grooves of existing size and necessary two legged MS pipe scaffolding as wherever required incl curing required upto G plus 3rd floor bldg complete all as specified and directed.

M&L for rendering 5 mm thick in CM 1:3 on fair faces of brick work or concrete surfaces using waterproofing compound in ceiling finishing the surface fair and even all as specified and directed. (cost of integral water proofing compound shall be measured seperately).

Supply only Integral water proofing compound complete all as specified and as directed ..

M&L for rolled mild steel section as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors ; fixed with angle cleats or other connecting plates conforming to grade Fe 410 (Gde-E-250) incl one shop coat of zinc chromate primer incl preparation of surfaces complete all as specified and as directed .

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including nainital or similar pattern roof covering complete all as specified and as directed ..

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, fixed with self tapping screws complete all as specified and as directed .

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, valley gutter, ridge and fixed with crumple joint etc fixed with self tapping screws complete all as specified and as directed .

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed .

S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and as directed .

S&F roof trusses (framed), trussed, purlins,crane gantries, rails and fastnings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.conforming to Fe 410-W (Gde- E-250) quality 'A' complete all as specified and as directed .

Surface excavation in hard/dense soil n exc30cm deep and averaging 15cm deep getting out, and making good surface complete all as specified and directed

M & L hardcore of guage not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to true surfaces (broken stone or boulders) complete all as specified and as directed ..

M&L for 100 mm thick cement concrete 1:4:8 type D-2 (40 mm graded stone agg) as in sub base complete all as specified and as directed ..

M&L for machine pressed precast concrete inter locking paver block any shape and size confirming to IS-15658-2006 of 60mm thickness M-35 Grade, glossy finished of approved colour laid over and including 25 mm thick fine sand cushion to a line and slope etc and joined complete including spreading screened river sand over surface for filling the joints with rising surface vibrator etc complete all as specified and as directed .

Preparation of newly plastered wall surfaces and applying two coats of oil bound distemper over a coat of 3mm thick wall care putty and primer incl preparation of surfaces complete all as specified and directed.

Preparation of old plastered wall surfaces and applying One coats of oil bound distemper over a coat of 3mm thick wall care putty and primer complete all as specified and directed.

M & L for New treatment of walls and applying two coats of acrylic (antifungal) exterior grade paint of over one coat of primer on wall including preparation of newly plaster surface and necessary scaffolding upto G-3 storey complete all as specified and directed.

M & L Sheet glass 4 mm thk, ordinary quality and glazing in aluminium beading with screws/ rebates in square exc 0.5 sq.m in each pane complete all as specified and as directed .

M&L for 20 mm thick granite maching cut as in skirting/vertical surfaces i.e jambs /risers and pillars etc and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding, polishing and 15 mm thick backing coat in cement mortar 1:4 complete all as specified and directed.

M&L for preparation of New steel surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed.

Removing of bldg material from defence land exc. 5 km but n exc.15 km and depositing where directed complete all as specified and directed.

M & L for Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed.

M & L for Floor door stopper of aluminium alloy body 150 mm long and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S & F for Door closer hydraulically regulated Cast Iron Body, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

M&L for brick work with sub class 'B' bricks (old Size) straight or curved on plan exc 6 m mean radius and built in CM (1:6) complete all as specified and directed.

M&L for rendering 20mm thick cement plaster in CM (1:4) in two coats (15 mm under coat 5 mm finishing coat) with WPC by weight of 3% of total weight of cement in concrete complete all as specified and as directed. Note : WPC will be measuerd separately.

M&L for preparation of old plastered or un plastered wall surfaces, over 10cm girth, applying two coats of 100% acrylic, weather resistant emlusion over a coat of exterior wall primer complete all as specified and as per manufacturer's instruction complete all as specified and directed..

M&L for preparation of new steel surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for PCC 1:2:4 type B2 using 40 mm graded stone aggregate etc complete all as specified and directed.

M&L PCC (1:2:4) type B-0 (Using 12.5mm graded stone aggregate) as in coping complete all as specified and directed.

Removing building/demolised material/debri exc. 5 km but n exc. 25 km and depositing where directed complete all as specified and directed..

M&L for aluminium anodized grill with suitable aluminium anodized frame of F/H section with suitable fixing screws/attachment etc complete all as per M/S Deco Grill Design No DG -102 , 7.5mm size grill i.e. made out of 75mm thick aluminium plate all as per manufacturer's specifications.

S & F MS Plates (Plain or Chequred) channels, square cut or notched (ordinary and counter sunk) forming holes , without any attachment confirming to Fe 410-W (Gde-E-250) quality A complete all as specified and directed.

S & F Stairs (framed) including stringers, treades, landing, balusters, hand rails etc. including cleats, brackets, plates, etc complete complete all as specified and directed.

M & L for core cutting on RCC slab, beam, column any thickness upto 50cm in depth and 3cm to 5cm dia as per site requirement and fixing of nut/bolt and filling with sealing compound complete all as specified and directed.

M & L mild steel nut bolts (machine made) with hexagonal or square heads at one end and screwed other or screwed both ends, fixing with washer or nuts complete all as specified and directed..

Taking down 15mm bore, GI tubing and connections including cleaning for refixing or removal to store complete all as specified and directed..

All as per item No 62 above but 20 mm bore GI Pipe complete all as specified and directed..

M & L for Pre cast Cement concrete block masonary (type B1 1:2:4 20 mm graded aggregate) with solid blocks exc 10 cm in width and setting in CM (1:6) complete all as specified and directed.

S&F 4mm thick backelite with decoratve choice laminated on both side complition as specified and as directed

S&F 4.8mm thick sheet glass froasted or obscured one side and glazing with oil putty or wooden beads in square area n.exc 0.5 Sqm in each pane complete all as specified and as directed

S&F Aluminium anodised sliding door bolt 300m long, with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy .

S&F Extrude aluminium anodised alloy handles, fabricated type 200mm size complete all as specified and directed..

S&F Cement concrete 25 mm thickType B1 1:2:4 (20 mm graded aggregate) complete all as specified and directed.

M&L 20 mm thick Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window- cills,cooking platforms, working table and like over 20 mm thick screed bed or bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed

S&F 15 mm dia medium grade galvanized steel tubing with all fittings fixed to walls, ceilings or laid under floors all as specified and directed complete all as specified and as directed.

As per item No 71 above but 20mm dia medium GI Pipe complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan ( pedestal pattern) , white (excluding fixing bolts, flushing cistern and flush pipe) but with & including plastic seat cover of approved colour with flat bottom , and cover and mild steel chromium plated or aluminised hinging device etc complete all as specified and directed.

S & F in repairs white vitreous china squatting pan, 'Orissa' pattern, water closet of size 580x440mm with integral foot rest, P/S trap etc, fixed in repair complete all as specified and directed.

S&F in repairs PVC low level flushing cistern 10 Ltr capacity with complete fittings, flush pipe & float valves,handle incl brackets etc complete all as specified and directed.

S & F in repairs white glazed earthen ware vitreous china wash hand basin of size 630x450 mm with and including CI brackets, with granite including 32mm bore brass CP waste coupling Inlet/ outlet PVC flexible pipe etc complete all as specified and directed .

S&F in repairs health faucet ABS Body with 8 mm dia 1 mtr flexible tube and wall hook complete all as specified and as directed.

S&F 15 mm bore dia of pipe, brass chromium plated fancy type bib tap fixed in repairs complete all as specified and directed.

S&F in repairs 15mm size Stop Valves fancy type chromium plated screwed down high pressure with crutch or butterfly handle handle screwed both ends complete all as specified and directed.

S&F in repair 15 mm dia fancy type pillar tap cast copper alloy with capston heads chromium plated screwed down high pressure with or without hot or cold with long screws shanks and fly nuts screwed for iron pipes complete all as specified and directed.

S&F chromium plated, tubular towel rail 20mm dia, D type, 60 cm long between flange, fixed in repairs complete all as specified and directed.

M&L PVC SWR floor trap 75mm, plain with grating including setting and jointing with solvent cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall, applying two coats of oil emlusion distemper over a coat wall care putty of 3 mm thick and alkali primer complete all as specified and directed.

S&Fof vitreous china urinal, half stall type complete including providing andfixing plugs bedding urinal against wall in cement mortar in 1:2 securing urinals to plugswith and including 60 mm brass screws, pointing around urinal back in cement , flush pipes, inlet ,outlet etc fixed in repairs complete all as specified and directed..

S&F 32mm dia PVC waste pipe for WHB and urinals fixed in repairs complete all as specified and directed.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment of Fe 410-W ( Gde-E-250 quality-A) complete all as specified and directed..

S&F rotational moulded polythylene water storage loft tank tank of 300 ltr capacity hoisted including 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for inron pipe and fixed (minimum weight 210 grms ) all as specified in SSR Part I complete all as specified and directed..

Removing bldg material exc. 1.50 km but n exc. 5 km and depositing where directed complete all as specified and directed.

M & L for :- 1. First class wood based (Teakwood) frame of size 2.19m x 0.63m including glass shelf (03 Nos) having size 0.50m x 0.56m of 12mm thick having four Nos bottom and having 03 sides glass & front side door including complete polishing. 2. Fixing of light arrangement. 3. One wooden LOGO as per given by Engr-in-Charge. Note : Transportation charges included.

Taking down carefully old U/S point wiring copper/Aluminum (light/ fan /sockets/power) complete with switches, sockets, ceiling roses, lamp holders, brackets & other fitting & Fixtures connected, and making good to disturbed surfaces complete all as specified and directed.

Taking down old U/S tube light fittings single / Twin ,Recess mount fitting , etc and making good the distrubed surface matching with existing surface complete all as specified and directed.

Taking down old u/s MCB DBs complete with MCBs, isolator etc of any type and capacity from wall/ceiling etc & making good to the disturb surfaces complete all as specified and directed.

M & L for point wiring with FRLS PVC insulated unsheathed multi stranded copper conductor cable of 1.5 sqmm size 1100 volts grade drawn through and including non metalic rigid PVC casing and caping not less than 25mm width with all accessories fixed on wall including FRLS PVC insulated, unsheathed multistranded copper conductor cable of size 1.5 sqmm as earth continuty conductor connecting to common earth dolly and PVC moulded box ISI marked for having the switches, switch sockets regulator etc for One light/ceiling fan point controlled by one switch complete all as specified and directed.

All as per item No. 94 above but for One 5 Amps switch socket combination on independent board complete all as specified and directed.

All as per item No. 94 above but for One 5A flush type switch socket point on same board complete all as specified and directed.

S & F modular Metal Flush box of 3 module complete all as specified and directed.

S & F modular metal flush box of 6 module complete all as specified and directed.

S & F modular metal flush box of 1/2 module complete all as specified and directed.

S &F modular cover plate with frame 2 moule complete all as specified and directed.

S &F modular cover plate with frame 3 moule complete all as specified and directed.

S &F modular cover plate with frame 6 moule complete all as specified and directed.

M&L for point wiring (Work station for computer)complete with proper clour coding using PVC insulated unsheathed multistranded copper conductor cable 4.0 sqmm size, 1100 volts ISI marked, FRLS grade drawn through and including non metalic rigid, double lock, ISI marked, not less than 25mm casing caping with all accessories such as tee, bends, elbow, reducers, junction box etcfixed on wall/ceiling/truss and one run of PVC insulated unsheathed, multistranded copper conductor cable of 2.5sqmm size, 1100 volts, ISI marked, FRLS grade green colour as earth continuty conductor connected to common earth dolly with and including modular box with cover plate frame in any module ( Make : schneider elect/legrand mosaic/anchor ave) complete necessary electric connection for each workstation point comprising of 03 Nos 6A sockets and 01 No 15A socket on same board complete all as specified and directed. Note: (a) Colour coding shall be folowed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green

M&L for submain wiring with 2 runs of 4 sqmm and 1 run of 4 sqmm FRLS PVC insulated unsheathed multistranded copper conductor cable with proper colour coding drawn through and including non metalic PVC casing & caping not less than 25mm width ISI marked with all accessories like PVC elbow, PVC Tee etc fixed on wall complete including connecting up all as specified and directed. Note:-3 runs of cable and one run of PVC casing caping shall be treated as one unit.

M&L for submain wiring with 2 runs of 6 sqmm and 1 run of 6sqmm FRLS PVC insulated unsheathed multistranded copper conductor cable with proper colour coding drawn through and including non metalic PVC casing & caping not less than 25mm width ISI marked with all accessories like PVC elbow, PVC Tee etc fixed on wall complete including connecting up complete all as specified and directed. Note:-3 runs of cable and one run of PVC casing caping shall be treated as one unit

S&F in repair LED recess mounted type filling 36W 2'x2' CRCA LED slim panel with recess mounting powder coated white CRCA full glow LED panel inlcuding control gear and lamp complete all as specified and directed.

Supply and fix switch piano, modular type 1 way 6 Amps 1 module 240 volts flush type complete all as specified and directed.

Supply and fix switch piano, modular type 1 way 16 Amps 1 module 240 volts flush type complete all as specified and directed.

Supply and fix modular socket 6 Amps 2/3 pin 240 volts Ac combined 2 module complete all as specified and directed.

Supply and fix modular socket 16 Amps 2/3 pin 240 volts Ac combined 2 module complete all as specified and directed.

Supply and fix FAN REGULATOR , modular type 1 way 120W 2 module 240 volts flush type complete all as specified and directed.

Supply and fix ceiling rose surface bakelite three terminal of size 60x50 mm,240 Volts AC complete all as specified and directed.

S & F in repair Distribution Board double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection surface mounting VTPN 8 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc complete all as directed. (Note : The cost of removing old wooden box and making good of surface i.e. brick work, plastering etc is included in quated rate)

S & F in repair Distribution Board double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection surface mounting SPN 8 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc complete all as directed. Make -Legrand cat No 507610 or equivalent in list of manufactures (Note : The cost of removing old wooden box and making good of surface i.e. brick work, plastering etc is included in quated rate)

Supply and fix in repair MCCB 3P 100A 16KA thermal magnetic 415V complete all as specified and as directed.

S&F MCB SP 6 - 32 Amps, 10 KA Rupturing capacity complete all as specified and as directed.

S&F MCB SP 40-63 Amps, 10 KA Rupturing capacity complete all as specified and as directed.

S&F MCB SPN 40-63 Amps, 10 KA Rupturing capacity complete all as specified and as directed.

Supply , fixing, testing in repairs of JEF ECO SAFE Maintenance Free Grounding Solution set comprising of High tensile low carbon steel rod of 3 Mts length & 25 mm dia with 250 micron ( avera Schneider ) molecularly bonded copper on the outer surface to confirm with requirements of UL467 along with Back-fill compound strictly be a Carbon based conductive concrete type which has a resistivity of less than 0.12 Ohm Mtr as per Clause 14.5D of IEEE : 80 standard. Back-fill compound should be electronically conductive ( Like in metals ) and should not depend on moisture for conduction. JEF Powerfill Loresco compound shall be supplied in 50 Pound Bag. ( 1 Bag of 50 Pounds required per earthing set). Back-fill comound should be environment friendly, should solidify when mixed with water and set like concrete and should not leach / diffuse into the ground. A suitable earth terminaton clamp should also be supplied along with the set alongwith earth pit weatherproof complete all as specified and as directed. Note : Back-fill compund shall not be mixed with any soil while pouring in the bore hole.

M & L for 4mm GI wire earth continuity conductor or main earthing lead fixed to wall or buried in ground and fixed to panel/transformer alongwith 20mm gi pipe light grade for protection complete all as specified and as directed.

M&L for shifting of Split AC/Window unit from existing postion & refixing the new position/location including additional accerssories as required, bressing of existing copper pipe with new copper pipe, leak testing, testing & commisssioning complete all as specified and as directed.

Supply and fixing copper tubings of appropriate dia for suction line & for liquid discharge line duly insulated with suitable insulation material including making hole in wall for passing through pipe and making good distrubed surface complete all as specified and as directed.

Supply and fixing in repair walll/surface mounted 20W LED batten fitting engineering plastic battern with white acrylic cover complete with all accessories internally pre-wired and including fixing the fitting on wall/ceiling with suitable PVC round/square block-02 Nos including connecting up with twin core copper conductor cable with suitable size complete all as specified and as direted. Make : C&S cat No LTTB4F20WLEDEW BATTEN or equivalent make from list of manufactures

S&F in replacement of metalic exhaust fan (heavy duty) of size 300mm sweep complete set with louvers connecting up including provn of three core flexible copper wire of size 23/0.0076 from ceiling rose to exhaust fan including taking down old unsv fan complete all as specified and as direted.

M & L for point wiring with FRLS PVC insulated unsheathed multi stranded copper conductor cable of 1.5 sqmm size 1100 volts grade drawn through and including non metalic rigid PVC casing and caping not less than 25mm width with all accessories fixed on wall including FRLS PVC insulated, unsheathed multistranded copper conductor cable of size 1.5 sqmm as earth continuty conductor connecting to common earth dolly and PVC moulded box ISI marked for having the switches, switch sockets regulator etc complete all as specified for one 5 pin,15A switch socket combination on same board

Supply and fixing LED lights fitting 1x20W,220VAC decorative box type with driver,holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

Supply and fix building FLOOD light new generation energy saving and environmental friendly long life versatile powder coated pressure die cast aluminium compact IP 66 road way luminaire with high power LEDs as light with heat resistant toughned glass with lens source and exclusively designed polycarboante cover along with electronic driver of cap 400W with all accessories including provision of GI bracket ,clamps,nut,bolt etc complete all as specified and as directed.

S&F wall fan 400mm sweep BEE 5 star rated 230V 50Hz AC supply single phase including accessories and connection with flexible wire three core for phase,neutral & earth complete all as specified and as directed.

Supply and lay XLPE cable insulated screened PVC bedded,galvanised steel strip or wire armoured,electric power cable(heavy duty) 1100 V grade with stranded aluminium conductor of size 16Sqmm 2 core complete all as specified and as directed.

Supply,laying and fixing 50mm bore GI pipeline for necessary road crossing,culverts etc for cable protection all as specified and as directed.

Provision of cutting bituminous road at a width not more than 30cm and a depth not exceeding 60cm for laying of pipes on road crossing for cable protection and making good with the existing surfaces complete all as specified and as directed.

S&F Marine search light weather proof chromium plated brass body wheel house arrangements for both vertical and horizontal direction made out of brass sheet complete with heat resistant toughened glass with hot air escape arrangememnt with hot air escape arrangement with halogen lamp provided on security & fulls et upwith 2000W halogen lamp and reflector complete with all accessories and fixing arrangement

RAJU ENTERPRISES (BID ID -3237510)

SUNRISE CONSTRUCTION CO (BID ID -3237551)