Marine PS GF FF_building

Removing old lime or cement plaster from walls including racking out joints 12mm deep (1/2) and removing the debriswithin 50m lead including cost of all labour with T & P, Cess required for the work as per direction of Engineer-in-Charge.

16mm (5/8") thick cement plaster in C.M. (1:6)finished smooth to inside surface of 9" thick brick wall after racking out the joints including watering & curing for seven days with cost and conveyance of all materials and labour with T&P required for the work with all , Royalty, DMF, EMF & Additional Charges & Cess etc, complete in all floor as per direction of Engineer-in-charge.

Providing fitting and fixing up partition walling OEL aluminum anodized section No. 9210 and 9207 as single groove and double groove respectively as horizontal and vertical memer and OEL section 4660 as Tapered clip for fixing up 12mm thick prelaminated board (Nova pan Make) and jointing angle No. 1855 including costof materials all labour with T&P & Cessrequired for the work etc completeas per direction of Engineer-in-Charge.

6mm thick cement plaster in cement mortar (1:4) to ceilling of roof lintel and chajjas after chipping and chiselling the same and clearing the surface by wire brush finished smooth watering and curing for 7 days including cost,conveyance of all materials and labour with T&P & Cess required for the work withand Royalty, DMF, EMF & Additional Charges etc complete in all respects in all floors as per direction of Engineer-in-Charge.

Supplying & Providing, of M.S. panneled Door double leaved with MS frame and grill over all sized including frame made out of following materials conforming to relavant ISS frame 35x35x6mm M.S. Angle window panel 1.00mm C.R.sheet panel stiffener convering width of each leaf 19x5mm M.S flat 2 Nos of each leaf hinges size 100mm 4 nos (2 nos an each side) bought out ofISS hold fast 35x35x6mm M.S. angle 100mm length bifurcated tip 2 nos on one side handle 19x5mm flat 2 Nos fabricated (Inside) tower bold 4 Nos bought out as per ISS including cost,conveyance, of all materiasl andwith T&P & Cess in all respect and as per direction of Engineer In Charge.

Supplying & providing, of M.S. window With Shutter grill made out of M.S flat conforming to IS No -1977/1996 as per the design approved with cost, conveyance &of all materials & labour with T&P & Cess in all respects as directed by the Engineer-in-Charge.

Supplying & providing, of M.S. window grill made out of M.S flat conforming to IS No -1977/1996 as per the design approved with cost, conveyance &of all materials & labour with T&P & Cess in all respects as directed by the Engineer-in-Charge.

Labour for fitting,fixing ofM.S. Window shutters as per approved design including cost of screws with cost of all labour, T&P and Cess required for the work etc, complete excluding cost & conveyance of M.S.Door/Window in all respects as directed by Engineer-In-Charges.

Painting two coats with any approved paint to Iron/wood work over a coat of oil bound primer including cost of paint & primer sand papering polishing the surface with cost conveyance andof all materials and labour with T&P required for the work with Cess etc complete as per the direction of the Engineer-in-Charge

Distempering two coats over a coat of oil bound primer to the wall surface with any approved shade including cost of distemper and primer with conveyance Royalty, DMF, EMF & Additional Charges andof allmaterials and labour with T&P required for the work with Cess etc, complete in all respect as per direction of Engineer-in-charge.