8883 SPECIAL REPAIRS TO BLDG. No. 22 (A), 22 (C), 22 (D) AT WANOWARIE ROAD AND SPECIAL REPAIRS TO ROOF TO ARREST SEEPAGE / LEAKAGE OF BLDG No. P-76 AT MINTSD UNDER GE SOUTH PUNE

Amount

Demolition of stone slab/tiles of any description or thickness laid bedded & pointed in cement mortar in floors, hard standing Apron etc complete all as specified and directed

M&L for coloured vitrified tiles 600 x 600 x 8 mm thick as in flooring, set and jointed in neat cement slurry and pointed in coloured cement to match with tiles, laid over and including 20mm thick screed bed in CM (1:6) complete all as specified and as directed.

M&L for coloured vitrified tiles 600 x 100 x 8 mm as in skirting/dados, set and jointed in neat cement slurry and pointed in coloured cement to match with tiles, laid over and including 10mm thick backing coat in CM (1:4) including triangular filleting in CM 1:4 on top of tiles complete all as specified and as directed.

M&L for coloured Non skid ceramic tiles 7 to 8mm thick(square/rectangular) area of each tile exc 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 20mm thick screed bed in CM (1:6) complete all as specified and as directed.

M & L for 25 mm thick PCC (1:2:4) type B0 (12.5mm graded stone aggregate) as in leveling course of floor tiles etc complete all as specified and directed by Engineer-in-Charge.

M&L for coloured glazed ceramic tiles of size 600x300x7mm thick of colour and pattern as approved by GE, as in vertical surface set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 10mm thick backing coat in CM (1:4) in etc complete all as specified and as directed.

M&L Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over and including backing coat 10mm thick in CM (1:4) complete all as specified and directed

M&L for 20mm thick Granite (of any type/colour) work (table rubbed and polished) in steps, pillars;window cills/jamb, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. as counters of any radious etc laid over 15mm thick screed bed in CM ( 1:6) complete all as spcecified and directed.

Labour only for full round moulding to 18 to 20mm thick granite slab all as directed by Engineer-in-Charge.

S & F Machine cut cuddappa stone slab 20 to 25 mm thick for making cooking platform etc. complete all as spcecified and directed.

M&L for 19mm thick prelaminated particle board both side decorative face, including providing second class hard wood 6mm thick beading for edges of boardalround all as specified and directed by Engr in Charge.

S&F in repairs 40 mm dia polished hardwood cupboard Knobs fixed with nuts, screws and washer of brass polished complete all as specified and as directed

S & F in repair contionous hinges MS bright finish or electro galvinised with of flaps 30mm complete all as specified and as directed.

S&F in repairs Magnet catches and striking plate complete all as specified and as directed.

Dismantling ceiling / boarding of any description, fixed in any position like ceiling,partition etc with nails including frame work of timber complete all as specified and as directed.

S&F for Gypsum ceiling board for ceiling prepainted, perforated finish 600x600x9 to 9.5mm thick in size of approved brand/make, laid over and including grid work of size 600x600mm, made out of 0.5mm thick GI tee 32x24mm for main, 25x24mm for cross tee and 20x20mm angle fixed on wall, powder coated finish on exposed faces of tee and angle, hung from ceiling using 2mm thick GI suspension wires spaced at 1200mm on main runners including making niches for fans/light at as specified and directed

Taking down chowkats or frames of wooden / steel n.exc 1.5 sqm (without taking off shutters from the frames) complete all as specified and as directed.

Taking down chowkats or frames of wooden / steel exc 1.5 sqm & n.exc. 4 Sqm (without taking off shutters from the frames) complete all as specified and as directed.

Taking down shutters of any description n.exc 1 sqm each complete all as specified and as directed.

Taking down shutters of any description exc 1 sqm and n exc 2 Sqm each complete all as specified and as directed.

S & F pressed steel frames for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate etc complete as specified size of frame 105 x 60mm filled with PCC 1:3:6 type C-0 complete all as specified and as directed.

S & F pressed steel frames for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate etc complete as specified size of frame 125 x 60mm filled with PCC 1:3:6 type C-0 complete all as specified and as directed.

S & F 35mm thick flush shutters, solid core construction, with block board core and plywood face panells commercial type on both faces incl 6mm thick Ist class HW (Teakwood) beading all around on edges complete all as specified and as directed.

S & F 35mm thick glazed and skeleton shutter open rebated and prepared to receive glass,gauge,etc.edges of framing plain,chamfered or rounded fitted with cut and mitred beads for securing glass,etc; The size of the rail and stile as per IS 1003 (Part-I), Kiln seasoned and chemically pressure treated as specified and directed by engr in charge.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube, all as mentioned in Item No. 8095 of SSR Part-II complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (stiles) consisting of frame made cut of M.S tubes for top & bottom rails; M.S frame shall be covered with heat moulded plain colour PVC ‘C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and single side prelaminated PVC sheet 5mm thick for top rail, lock rail and bottom rail and stile and rails having one side feathered edge, on other side 10mm 90° bent edge, panelling to be fitted in MS frame welded/sealed to the stiles and rails and 15mm thick PVC sheet beading inside and decorative PVC beading of 10mm x 10mm all as specified and directed and as per product Drg given on Sl. Page No. 157 of SSR Part-II 2010

Preparation of new wooden surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

S&F three track sliding window with two or more shutter with 4mm thick tinted glass one shutter using stainless steel wire cloth 0.36mm nominal dia & 1.18mm width aperture for mosquito proofing with good quality bearing handle, lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified and directed by Engr-in-Charge. (a) Bottom frame - 20620 (b) Top frame & vertical - 20621 (c) Handle (side) - 20606 (d) Shutter inter lock - 20724 (e) Shutter top & Bottom - 20844 (f) Glazing clips - 19352.

S&F fixed glass ventilators using 5mm thick plain glass and following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make and rubber beading etc all as directed. (a) SP - 20048 (b) Glazing clips - 19352.

S & F butt hinges 100mm size MS cold rolled medium weight complete all as specified and as directed.

S & F butt hinges 75mm size MS cold rolled medium weight complete all as specified and as directed.

S&F aluminium anodised barrel tower bolts of extruded section 200 mm long complete all as specified and as directed.

S&F aluminium sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section etc length of bolt 300 mm complete all as specified and as directed.

S&F alum anodised handles, fabricated type, of size 150 mm complete all as specified and as directed.

S &F 300mm MS ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and as directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.18 mm & fixed with stainless steel wire staples complete all as specified and as directed.

Removing of old water proofing treatment including screed bed and cleaning the surface of slab with wire brushes removing dust, foreign materials including flushing at junction of wall and removing the rubbish off the premises to a distance exc 500m all as directed by Engr-in-Charge

M & L for Water proofing treatment to RCC roof slab shall be carried out as specified below and as directed by Engineer-in-Charge. (a) M&L for 10mm thick screed bed in cement mortar 1:3 on concrete surfaces of roof slab and parapets mixed with WPC @ 3% by weight of cement finished even and smooth without using extra cement (b) The roof surface shall be thoroughly wire brushed, cleaned to eleminate all sharp projection washed dried up and cleaned of all foreign matter and dust to receive premier.(c) Laying APP polymer modified approved membrane, non woven, polyester, weighing not less than 3.5 Kg/Sqm with laps & overlaps as specified & joints sealed and applied complete by torch application method all as specified & directed by Engr-in-Charge. Carrying out test by flooding water for 24 hrs for leakage & seepages and rectifying the same to the entire satisfaction of GE.(d) Finally applying a coat of solar reflective bituminous aluminium paint @ 0.15 ltr/Sqm on the top of membrane surfaces complete all as specified & as directed by Engr in Charge.(e) The overlap while Torching shall be 100 mm on length side and 100 mm on width side of membrane.(f) The treatment shall be carried as per manufacturer instructions.Note:- The contractor shall furnish the following :- I) Quality confirmation from the manufacturer of the product alongwith quantity supplied.ii) Manufacturer test certificate.iii) The result if tested any of the independent laboratory, the testing charges shall however be borne by the Contractor.

Disconnecting existing tanks ,setting aside (or lowering if required) for repair ,cleaning etc and hoisting if required reconnecting and refixing in position Exc 500 Ltr & N exc 1000 ltr Complete all as specified and as directed

Demolition of cement concrete in ground floors and paving not exc 15cm thick (below or above ground level) un-reinforced complete all as specified and as directed.

M&L for PCC 1:3:6 Type C-2 using (40mm graded stone aggregate ) 75mm thick finished even and smooth without using extra cement as in plinth protection, PCC path complete all as specified and as directed.

Dismantling of PCC Block/Brick masonry work in any description/position including removing debris from the site complete all as directed by Engr-in-Charge.

M & L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified & directed by Engr-in-Charge.

Taking down cement plaster on brick/ block walling including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

Rendering 10mm thick in cement mortar 1:6 on concrete surfaces finished with sagol finish to plasterred surface by using readymix plaster of make Godrej, Buildwell, Ascolite etc complete all as specified.

Rendering 15mm thick in CM 1:4 on stone surface finished even and smooth with thin layer of sponge finish by using readymix plaster of make Godrej, Buildwell, Ascolite etc complete all as specified and as directed.

Rendering 5mm thick in CM 1:3 on concrete surface finished even and smooth with a thin layer of sagol as in ceiling by using readymix plaster of make Godrej, Buildwell, Ascolite etc. complete all as specified and as directed.

M & L preparation of new plastered surfaces of walls & applying two coats of weather shield acrylic latex paint which gives 5 year of performance warranty complete all as specified & directed.all as specified. (Make : Burger/Nerolac/Asian paint)

Preparing newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and as directed.

M&L for applying three coats of white wash on ceiling and incl. preparation of new plaster surface complete all as specified and as directed.

Prepration of old painted wooden surfaces exc 10 cm width or girth and applying one coat of synthical enamel paint complete all as specified and as directed.

Dismantling of single layer mangalore pattern or similar tiles in roofing laid dry complete all as specified and as directed.

Dismantling battens for tiles, shingles etc of any size including tilting fillets spaced exc. 15 cm complete all as specified and as directed.

Dismantling of timber scantling 40 sqcm and over in section in any position(unframed work) complete all as specified and as directed.

Dismantling of timber scantling as in fillets,rails, posts, rafters, purlins under 40 sq cm in section complete all as specified and as directed.

S&F roof sheeting prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 fixed with ms flat clamp complete all as specified and directed

Dismantling of structural steel work including doors,gates but excluding framed Truss etc complete all as specified

M&L for MS structural steel work, framed as in trusses, purlins, rafter, post etc. conforming to grade E-250 (Fe-410W, quality A) including shaped washers including necessary cutting required length, notching drilling, riveting and or welding or connecting with nut bolts with angle cleats, fish plat, gusset plate and also erecting in true position complete all as specified & directed.all as specified.

M&L for Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted,or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290, Gde-E-165 complete all as specified & directed.

Preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.

S&F in repair cast iron Nahani trap with grating of diameter of outlet 75mm including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and as directed.

M&L(SWG) gulley trap 150mm setting and jointing with solvent cement complete all as specified and as directed.

Dismantling existing water tanks 250 lit/ 500 lit/1000 ltr capacity and removing to store complete all as specified and as directed.

S&F in replacement PVC water storage tank ISI marked rotational moulded double layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of 1000 lts capacity capacity complete all as specified and as directed.

Taking up or down carefully steel tubing and connection s including cleaning for refixing or removal to store of following sizes :-

15mm bore

20mm bore

S&F GI tubing tubes "medium grade" galvanized with all fittings and fixed complete to walls and ceiling or laid in floors etc. of following sizes :-

15mm bore

20mm bore

Refixing old steel tubing and connections in new or old position (wall, ceilings, floors etc) of following sizes :-

15mm bore

20mm bore

Dismantling of CI / AC/ PVC pipes of various dia jointed in CM or adhesive 75 to 100mm dia complete all as specified and as directed.

S&F for 110 mm dia PVC SWR pipes single socketed in any length with rubber ring joints fixed to wall including clamp etc complete all as specified and as directed.

S&F for 75 mm dia PVC SWR pipes single socketed in any length with rubber ring joints fixed to wall including clamp etc complete all as specified and as directed.

S&F PVC (SWR) bends any radius 110 mm bore complete all as specified and as directed.

S&F PVC (SWR) bends any radius 75 mm bore complete all as specified and as directed.

S&F in repairs vitreous china wash down water closet pan, 'Pedestal' white, including fixing bolts etc including PVC seat cover white with flat bottom including MS, CP or aluminium anodised hinge devices including PVC low level flushing cistern 10 Ltr capacity with all internal fitting, inlet, outlet pipe connections etc. complete all as specified and directed.

S&F in repairs vitreous china, squatting pan, 'Orissa' pattern, size 580 x 440mm white, with integral foot rest, including concrete bedding and PVC flushing cistern 10 Ltr capacity including all internal fitting, inlet, outlet pipe connections etc. complete all as specified and directed.

S & F in repair for Wash Hand basins, Vitreous China, white, flat back, size 550x400mm, including cutting for and pinning in ends of brackets or erecting stand, angle bracket (but exclusive of fixing of supply, waste pipe, taps) complete all as specified and directed.

S&F Pillars taps CP 15mm dia , cast copper alloy with capstan heads, screwed down high pressure with long screwed shanks and flynuts screwed for iron pipe and fixed in repairs all as directed by EIC.

S&F brass chromium plated shower rose with or without swivel joints, any size including fixing to a steel pipe or union of size 125mm size complete all as specified and as directed.

S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm complete all as specified and as directed.

S&F stainless steel, sink 1 mm thick for kitchen or laboratory, with plugs, waste pipe, washers; incl bedding in cement mortar on to dwarf wall or including fixing cantilever CI Brackets, connecting union etc & connecting to inlet/out let for smooth functioning size of sink 495 x 420mm overall and bowl size 410mmx330mmx160mm, including PVC connection, CP waste coupling, etc. complete all as directed by Engr-in-Charge

S&F looking mirror of size 600 x 450mm approved quality and make , mounted on 6 mm thick plywood commercial as backing and aluminium powder coated frame all around on edges complete as directed by Engr-in-Charge.

S&F 15mm bore bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipes all as specified fixed in repairs.

S & F aluminium powder coated brackets suitable for 20mm dia curtain rod (minimum projection from wall 75mm) fixed in wall including drilling, rawl plug, screws etc complete all as specified and directed by Engineer-in-Charge.

S&F aluminium powder coated fancy type curtain rod 20mm bore all as specified and directed by Engr-in-Charge.

S&F, in repair, CP stop valve 15mm dia cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipes for unions and fixed complete all as specified and as directed.

Dismanting water tank of capacity exc 1000 & n exc 2000 ltr and reomoving to store complete all as specified and as directed.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 2000 lit capacity hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed.

Supply and fix in repair 20mm bore Gun metal gate valve with iron wheel head, screwed both ends for iron pipes, complete all as specified and directed.

S&F 20mm bore ball brass valve, high pressure with polythine float and fly nut complete screwed for iron pipe or brass ferule complete all as specified and directed.

All as per item No 89 above but fixed in repairs complete all as specified and as directed.

M & L for PCC 1:2:4 type B1 (20 mm graded aggregate) as in roof kerbs, benching rounded or chamfered on edge, water tank plateforms etc all as specified complete all as directed at site.

Taking down point wiring( light, fan, socket or power) any type complete, including fixtures and fittings such as switches, ceiling roses, pendants,regulators sockets, loght fitting etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

Taking down old unserviceable / worn out submain of any type and size complete all as specified and as directed.

Taking down old unserviceable /worn out DB,s any type and size all as spd and directed by engrs in charge.

M&L for Point wiring using approved colour coding as per IS, with stranded copper conductor 1.5 Sq. mm (nominal area), single core, PVC insulated and unsheathed stranded FRLS cable 1100 volts grade ISI-694 marked Makes of cable - Finolex / Havells / Polycab in and including heavy duty,in and PVC casing caping including all accessories with modular sunken boxes concealed in wall with earth dolly duly covered with modular plate inner and outer metal flux boxes, cover plate with frame of suitable size for modular accessories switches/sockets etc Make of modular sunken boxes/ inner & outer plate -Legrand (Myrius) or equivalent in Havells in Hony well including PVC insulated stranded copper conductor 1.5 Sqmm (nominal area) single core cable as earth continuity conductor to common earth and connecting to earth dolly for the following including making good the disturbed surfaces and matching with existing clour in two coatscomplete all as directed and specified .

One light/fan point controlled by one switch and regulator

Switch Socket outlet, three pin, 5 Amp, independent

Bell/Buzzer points controlled by one bell push.

One switch socket outlet, three pin 5 amps on the same board

One light point controlled by two, 2 way switches 05 / 06 Amps.

M&L for Point wiring using approved colour coding as per IS, with stranded copper conductor 2.5 Sq. mm (nominal area), single core, PVC insulated and unsheathed stranded FRLS cable 1100 volts grade ISI-694 marked Makes of cable - Finolex / Havells / Polycab in and including heavy duty,in and PVC casing caping including all accessories with modular sunken boxes concealed in wall with earth dolly duly covered with modular plate inner and outer metal flux boxes, cover plate with frame of suitable size for modular accessories switches/sockets etc Make of modular sunken boxes/ inner & outer plate -Legrand (Myrius) or equivalent in Havells in Hony well including PVC insulated stranded copper conductor 1.5 Sqmm (nominal area) single core cable as earth continuity conductor to common earth and connecting to earth dolly for the following including making good the disturbed surfaces and matching with existing clour in two coats complete all as directed and specified.

S & F modular switch 6A,one way 1 module all as specified and directed by Engineer In Charge

S & F modular switch 16A,SP one way 1 module all as specified and directed by Engineer In Charge

S & F modular sockets 6A, 2/3 pin universal combine 2 module all as specified and directed by Engineer In Charge

S & F modular sockets 6/16A, 2/3 pin combine 2 module all as specified and directed by Engineer In Charge

S & F modular switch 6A,one way SP bell push 1 module all as specified and directed by Engineer In Charge

Supply and fix modular step fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed.

S & F for Modular Switch piano flush type, single pole, two way, and 5/6 Amp single module complete all as specified.

M & L for Sub main wiring complete with two single core 4 sqmm,1100 volts grade, PVC insulated, stranded copper conductor FRLS cable with continuous copper earth conductor of 2.5 sqmm in and including PVC casing caping complete all as directed by Engineer-in-Charge

M & L for Sub main wiring complete with four single core 6 sqmm ,1100volts grade, PVC insulated, stranded copper conductor FRLS cable with two single core continuous copper earth conductor of 2x4 sqmm in and including PVC casing caping complete all as directed by Engineer-in-Charge

Supply & fix ceiling rose surface bakelite three terminal 240 volts complete all as specified and as directed.

Supply & fix bell ding dong AC 230 volt single pole complete all as specified and as directed.

S & F Sheet metal, 20 amp Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 amps,10 KA breaking capacity,'C' series,240 V complete all as specified and as directed.

S&F lamp holder (Angle/bracket) insulated body, with back plate for batten fittings complete all as specified and as directed.

S&F IP-54, IK 09, protection metal double door Vertical TPN -DB rated busbar, 415 volts, 50 HZ complete with interconnection links, blanking plates, cable ties, identification labels TPN 4 way, 12 modules suitable for accommodating 100 Amps MCCB 4 pole as incomer and SP/TP MCB as out going and concealed in wall including all cutting holes in or through walls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing Make - Legrand cat no-5077 50/ ABB/L&T. (Note - MCCB 100 Amps 4 pole 25 KA with electronic protection unit as incomer will be measured seprately in relevant item)

S&F IP-54, IK 09, protection metal double door Vertical TPN -DB rated busbar, 415 volts, 50 HZ complete with interconnection links, blanking plates, cable ties, identification labels TPN 8 way, 24 modules suitable for accommodating 100 Amps MCCB 4 pole as incomer and SP/TP MCB as out going and concealed in wall including all cutting holes in or through walls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing (Make - Legrand cat no-5077 52 / ABB/L&T) [Note- MCCB 100 Amps 4 pole 25 KA with electronic protection unit as incomer will be measured seprately in relevant item.]

S&F MCB SP 6-32amps,10KA,'C' series complete all as specified and as directed.

Supply and Fix in replacement of MCB TP 63 Amps, 10KA, 3 Pole, 415V complete all as specified and as directed.

Supply and Fix MCCB 100 Amps, 25 KA, 4 Pole,415V, electronic protection unit model of Legrand cat no- 420315 or equivalent in L&T/ABB.

M & L for Earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm as earth lead wire by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in Electrical plate No 3, SSR Part I- 2009 with 15 mm dia medium grade GI pipe as a protection and 20 mm dia medium grade GI pipe for watering purpose inlcuding funnel, wire mesh, RCC pit with cover complete and connected to earthing test point all as specified or indicated including testing on completion all as specified and as directed.

M & L for fixing earth continuity conductor or main earth lead fixed to wall or buried in ground or drawn in GI pipe with 4 sqmm GI Wire complete all as specified and as directed.

S & F wall mounted LED 25 watts IVORA LED BATTEN for surface Mounted, Anodized extruded aluminium housing, high transmissitivity diffuser and high lumen output, 230 volts etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Make Bajaj Cat part No 830258 or its equavalent in Philips, Wipro, Havells. all as specified and as directed.

S&F LED city 4 1x15 W havells luminaries .Cat Part No LHFODFE1TC1W015 of HAVELLS equivalent in WIPRO/Havells.

S & F for LED 10 watts batten aluminium extruded with decorative end caps including removal old unserviceable T8 type light fitting complete all as specified and as directed. Make- Bajaj Cat Part No BCLSB 10 WH, Wipro Cat part No LL20-111-XXX-65-NE or its equvalent in Philips, Havells all as specified and as directed.

Taking down geysers 25/50 liters capacity carrying to workshop for repairing, servicing, cleaning etc, replacement of thermostat, heating element, indicator lamp and thermal cut out incl fixing of PVC cable, sheathed, three core with stranded copper conductor of size 2.5 sqmm and refixing the geysers at location complete all as specified and as directed.

S&F air fresher PVC type soundless 230 volts ISI marks of size 250mm complete all as specified and as directed. (Make :- Bajaj / Crompton / Usha / Khaitan)

S & F for metal body exhaust fan, AC single phase, heavy duty, turbo force 240 V of size 300 mm sweep with louvers including necessary connection and replacement of flexible copper cable from ceiling rose and taking down of old unserviceable fan complete all as specified and as directed. Make - Bajaj Cat Part No -Maxma DX or its equivalent in Crompton/Havells all as specified and as directed.

M&L for cutting and making hole into or through cement concrete or stone masonery wall of thickness upto 45 cm and in girth 45 cm for fixing exhaust fan of size 300mm sweep & providing fasterner grouted in wall four nos inside for fixing of exhaust fan and four nos outside for louvers and redressing the surface and making smooth with cement plaster 1:4 to match existing surface incl lime white wash all as spd and directed all as specified and as directed.

S & F Security light fitting for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25 watts with pre wired and necessary mounting arrangementsnd provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape and including taking down old unserviceable existing light fitting of any description complete all as directed by Engineer- in-charge. (Make :- Bajaj Cat No BCLST 25W LED I, Philips Cat Part No BRP042 or its equivalent in Wipro)

Taking down Ceiling fans/ exhaust fan, removing to workshop for servicing, cleaning, lubricating, replacement of split pin, rubber bush and other spare required if any including fixing PVC cable with stranded copper conductor of size 0.75 Sqmm and refixing the fans at the same locations.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for laying of cables etc. and getting out in the following type of strata complete all as specified and as directed by the Engineer-in-Charge.

Soft/Loose soil

Hard/ Dense soil

Soft/disintegrated Rock

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and as directed by the Engineer - in - Charge.

Removal of excavated material [soil] to a distance not Exc 50m and depositing where directed at a level not exc 1.5m above the starting point where directed complete all as specified and as directed by the Engineer - in - Charge.

M&L for Reinforced concrete pipes,class NP2 with one collar per lengh of pipe of dia 150 mm ,half round (02 Nos for top & bottom) as specified by Engr-in-charge.

Supply,laying, testing and commissionnig of UG LT cables 1100 volts grade, XLPE insulated and PVC sheathed, armoured, with multi stranded aluminum conductor, heavy duty conforming to IS - 1554 part-I, including cable glands, crimpimg type cable lugs in LT panel/MCCB in bldg etc to suit the cable laid in trenches/ fixed to poles/walls/drawn through pipes complete of sizes 50 Sqmm 3.5 core.

S&F GI tubing 50 mm dia Light grade for cable protction laid in wall /floor / pole with MS clamp , bolt nuts including taking down complete all as specified and directed .

S G Engineers

Anand Trading Co

Vijay Construction and Company

M/S Abhishek Builders

M/s.BAJRANG CONSTRUCTION