02/SE/MC-I/WBPHED/2024-2025

Amount

Supply and delivery of following items : Supply & delivery at store of Harizantal type Openwell Submersible pumping machinery as per follwing specification:- Impeller : Cast Iron ,Motor Body : Cast Iron, Delivery: 65/80mm, Casing : Cast Iron, Shaft : Stainless Steel, Motor: Methode of Starting : D.O.L , Supply Voltage : 3 Phase , 415 V( ±10%) , 50Hz(±5%), (Curve chart will be submitted before the delivery).

Gr.A-Discharge : 11.74M3/HR, Head : 30 Mtr,

Gr.B-Discharge : 17.42M3/HR, Head : 30 Mtr,

Gr.C-Discharge : 20.38M3/HR, Head : 30 Mtr,

Gr.D-Discharge : 27.75m3/hr , Head : 30 Mtr,

Gr.E-Discharge : 59.13m3/hr , Head : 30 Mtr

Gr.F-Discharge : 34.70m3/hr , Head : 30 Mtr,

1.1KV grade 2.5 sq.mm x 3 core water proof flat submersible copper cable for above pump-motor set.(For Group.A,B,C &D)

1.1KV grade 4 sq.mm x 3 core water proof flat submersible copper cable for above pump-motor set.(For Group.E &F).

1.1KV grade 10 sq.mm 4 core XPLE Aluminium armoured Cable.(For Group.A,B,C &D)

1.1KV grade 16 sq.mm 4 core XPLE Aluminium armoured Cable.(For Group.E &F).

Supply and delivery of 32 Amps Kit-kat rewireable proceliain fuses carrier & base (Specification-IS:2086).(For Group.A,B,C &D)

Supply and delivery of 63 Amps Kit-kat rewireable proceliain fuses carrier & base (Specification-IS:2086).(For Group.E &F).

32 Amps re-wireable porcelain fuse unit type TPN Main Switch with steel sheet enclosure (Conforms: IS/IEC600947-1&3). (For Group.A,B,C & D)

63 Amps re-wireable porcelain fuse unit type TPN Main Switch with steel sheet enclosure (Conforms: IS/IEC600947-1&3). (For Group.E &F).

TPN Changeover switch 32 Amps 415V, 50Hz, 4p offload with steel sheet enclosure (Conforms: IS/IEC60947-1&3). (For Group.A,B,C &D)

TPN Changeover switch 63 Amps 415V, 50Hz, 4p offload with steel sheet enclosure (Conforms: IS/IEC60947-1&3). (For Group.E &F).

63Amps, 4way, wall mounted Copper Busbar Chamber with steel sheet enclosure (Conforms:IS/IEC:60947-3). (For all group)

63Amps, 6way, wall mounted Copper Busbar Chamber with steel sheet enclosure (Conforms:IS/IEC:60947-3). (For Group.A,B,C &D)

Supply and delivery of the following valves, pipes and gauges etc at site -

Heavy type suitable dia. MS suspension clamp along with nuts bolts and washers.(For all group)

80mm dia. CIDF Non-Raising Sluice Valves, PN 1.0 rating (Conforming to IS:14846) for delivery pipe line and wash out line.(MOC & TC needed for valve).(For Group A,B &C)

100mm dia. CIDF Non-Raising Sluice Valves, PN 1.0 rating (Conforming to IS:14846) for delivery pipe line and wash out line.(MOC & TC needed for valve).(For Group D)

125mm dia. CIDF Non-Raising Sluice Valves, PN 1.0 rating (Conforming to IS:14846) for delivery pipe line and wash out line.(MOC & TC needed for valve).(For Group F)

150mm dia. CIDF Non-Raising Sluice Valves, PN 1.0 rating (Conforming to IS:14846) for delivery pipe line and wash out line.(MOC & TC needed for valve).(For Group E)

80mm dia. CIDF single door swing Non Return Valve, PN 1.0 rating (Conforming to IS:5312).(MOC & TC needed for valve).(For Group A,B &C)

100mm dia. CIDF single door swing Non Return Valve, PN 1.0 rating (Conforming to IS:5312).(MOC & TC needed for valve).(For Group D)

125mm dia. CIDF single door swing Non Return Valve, PN 1.0 rating (Conforming to IS:5312).(MOC & TC needed for valve).(For Group F)

150mm dia. CIDF single door swing Non Return Valve, PN 1.0 rating (Conforming to IS:5312).(MOC & TC needed for valve).(For Group E)

Supply, delivery at site and storage of MS dismantling joint suitable for PN 1.0 rating for the following sizes for Individual Delivery of High Lift Clear Water Pump sets.

Nominal dia-80 mm(For Group A,B &C)

Nominal dia-100 mm(For Group D)

Nominal dia-125 mm(For Group F)

Nominal dia-150 mm(For Group E)

Supply, delivery of Medium B class GI Pipes of DN 80( conforming to IS 1239 part-I 2004) with supplied dismantling joint for delivery and common header lines on delivery side (suitable for PN 1.0 rating )including necessary Flanges, Bends, Tees, nuts and bolts gaskets, reducers,enlarger etc. as required to make the delivery line complete for the two number mono block pump.(For Group A,B &C)

Supply, delivery of Medium B class GI Pipes of DN 100( conforming to IS 1239 part-I 2004) with supplied dismantling joint for delivery and common header lines on delivery side (suitable for PN 1.0 rating )including necessary Flanges, Bends, Tees, nuts and bolts gaskets, reducers,enlarger etc. as required to make the delivery line complete for the two number mono block pump.(For Group D)

Supply, delivery of Medium B class GI Pipes of DN 125( conforming to IS 1239 part-I 2004) with supplied dismantling joint for delivery and common header lines on delivery side (suitable for PN 1.0 rating )including necessary Flanges, Bends, Tees, nuts and bolts gaskets, reducers,enlarger etc. as required to make the delivery line complete for the two number mono block pump.(For Group F)

Supply, delivery of Medium B class GI Pipes of DN 150( conforming to IS 1239 part-I 2004) with supplied dismantling joint for delivery and common header lines on delivery side (suitable for PN 1.0 rating )including necessary Flanges, Bends, Tees, nuts and bolts gaskets, reducers,enlarger etc. as required to make the delivery line complete for the two number mono block pump.(For Group E)

150mm dial Pressure gauge [Range 0-7kg/cm²] with glycerine filling inside the dial including brass cock and fitting complete [This cost includes 15mm. dia G.I. pipes and specials].(For All Group)

Supply, delivery at site and storage of Wall mounted chlorine machine Dol starter for 1 HP 3 ph motor.(Ampere range-1.5A -2.5A) (For Group-A,B,C &D)

Supply, delivery at site and storage of Wall mounted made of sheet steel fabricated 2 mm for load bearing & 1.6mm for non load bearing, indoor type, dust & vermin proof, lP-54 degree of protection, powder coated painted with rubber gaskets cover, front lockable hinged door with all Switchgear and other items duly wired up and tested as per specification Auto- manual timer based panel: Incomer: (A) 63 Amps, TPN MCCB with adjustable OL, 25 KA, E/F, auto phase corrector & necessary accessories with suitable SPD (i.e., Ammeter, Voltmeter, CTS & Switches), Outgoing:- (B) 5-7.5HP , TP DOL starter with other accessories - 2 Nos.(1W+1S) (Suitable size capacitor bank to improve PF from o.85 to 0.98) (C) 1 HP ,3 PH,415V,Clorinator feeder with necessary accessories & level controller-1 no., (D) 16A MCCB for in House light-1no. (E) 16A MCCB for in yard light-1no.,( All spare & components as per vendor list of phed) (For Group E &F)

Supply,delivery and storage at store of automatically controlled diaphragm type Chlorinator dosing pump with flow rate 100 LPH and maximum pressure of 10 kg/ CM2 with all accessories for pump & motor, foundation bolt, suction and discharge flange and with storage tank of dosing solution of 100 Ltr. Capacity and the prime mover to be coupled with pump of 0.5 H.P., 3 Phase, 1450 RPM, squirrel cage TEFC induction motor, Motor will be IE3. [Make of Machine: As per attached vendor list of PHED.] N.B. T.C. & G.C. of pump & motor needed.(For All Group)

Making earthing arrangement as per following --(For All Group)

Excavation of soil for installation of Earth electrode and filling and ramming for soft soil.

Earthing with 50 mm dia Gl pipe 3.64 mm thick x 3.04 Mts.long with TATA-Medium GI pipe with a provision to connect 25mm X 6mm GI flat strip complete with GI bolts, nuts, washers etc as required.

Supplying & fixing of earth Busbar of galvanized (Hot dip) MS flat 25mm X 6mm on wall having clearance of 6mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulator etc as required.

Connecting the equipments body to earth busbar including S&F 20mm X 3mm galvanized (Hot dip) MS flat on wall/floor with GI saddles as required and connection of equipments incld. drilling holes, with bolts, nuts, washers etc as required.

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36cm X 86.36cm X 46cm deep (below ground level) complete with cemented brick work (1:6) of 25cm width duly plaster with cement morter (inside) CI hinged inspection cover of size 36.56cm X 35.56cm with locking arrangement, GI reducer including drilling of 46nos. 12mm dia holes on the GI pipe.

Extra treatment of soil by using salt and charcoal or coke for plate electrode.

Installation of Submersible pumping machinery ,main switch,busbar, changeover,satrter, chlorine dosing machine,stabilizer etc (item no.1 to 7)at along with above supplied GI column pipes (as required),dismantling joint top cover, valves, and specials ,cable protection pipe and clamp, nut bolt, cable gland socket etc. making inerconnection of the pump delivery line to pump collecting main line near CWR . including RCC base for pump,Valve support and supply & laying of cable protection pipe as required and all to complete the job including painting of whole installation as per direction of EIC.(For A,B &C Group)

Installation of Submersible pumping machinery ,main switch,busbar, changeover,satrter, chlorine dosing machine,stabilizer etc (item no.1 to 7)at along with above supplied GI column pipes (as required),dismantling joint top cover, valves, and specials ,cable protection pipe and clamp, nut bolt, cable gland socket etc. making inerconnection of the pump delivery line to pump collecting main line near CWR . including RCC base for pump,Valve support and supply & laying of cable protection pipe as required and all to complete the job including painting of whole installation as per direction of EIC.(For D Group)

Installation of Submersible pumping machinery ,main switch,busbar, changeover,satrter, chlorine dosing machine,stabilizer etc (item no.1 to 8)at along with above supplied GI column pipes (as required),dismantling joint top cover, valves, and specials ,cable protection pipe and clamp, nut bolt, cable gland socket etc. making inerconnection of the pump delivery line to pump collecting main line near CWR . including RCC base for pump,Valve support and supply & laying of cable protection pipe as required and all to complete the job including painting of whole installation as per direction of EIC.(For F Group)

Installation of Submersible pumping machinery ,main switch,busbar, changeover,satrter, chlorine dosing machine,stabilizer etc (item no.1 to 8)at along with above supplied GI column pipes (as required),dismantling joint top cover, valves, and specials ,cable protection pipe and clamp, nut bolt, cable gland socket etc. making inerconnection of the pump delivery line to pump collecting main line near CWR . including RCC base for pump,Valve support and supply & laying of cable protection pipe as required and all to complete the job including painting of whole installation as per direction of EIC.(For E Group)

Making internal electrification of pump house consisting of 1no. Ceiling fan point, 2nos. tube light & 2nos. LED bulb point, 1no. bulk head point and 4nos. 40W LED with arm bracket at outside and one three pin plug point incld. supply of all necessary materials (approved make Ceiling fan, Lamps & fixture etc.) to complete the work as per IE rules, wiring with 2.5 sqmm / suitable gauge copper wire within PVC casing, PVC switch board etc as per direction.(For All Group)

Supply and fitting fixing of Sign Board for depicting the names and mobile numbers of pump and valve operators at this pump house.(For All Group)

Supply & delivery of plastic Chair without arm (For All Group)

Supply & delivery of plastic Table (For All Group)

Testing by licensed electrician and trial run for three months after Commissioning as per instruction of EIC by engaging one operater.(For All Group)

B T PROJECTS PRIVATE LIMITED

S. P. CONSTRUCTION