CWEK-15/2020-21

Amount

Taking down carefully old unserviceable existing GI pipes of size 150mm/100mm/80mm dia bore from trenches, roads, walls etc. complete and making disturb surface of wall/road/trenches etc. good to match with existing, complete all as specified and directed.

Taking down carefully old unserviceable existing GI pipes of size 50mm/40mm/25mm/20mm/15mm dia bore from trenches, roads, walls etc. complete and making disturb surface of wall/road/trenches etc. good to match with existing , complete all as specified and directed.

Taking down carefully old unserviceable existing sluice valves of size 150mm/100mm/80mm/50mm dia bore , complete all as specified and directed.

Taking down carefully old unserviceable existing gun metal gate valve of size 40mm/25mm/20mm/15mm dia bore , complete all as specified and directed.

Taking down carefully old unserviceable existing MCCB's of size 63A/100A/160A from panel complete and making good to match with existing , complete all as specified and directed.

Taking down carefully old unserviceable existing MCCB's of size 315A/400A from panel complete and making good to match with existing , complete all as specified and directed.

Taking down carefully old unserviceable existing 50 Sqmm,single core HRFR PVC insulated industrial grade copper conductor(unseathed) flexible cable, 1100 Volts , complete all as specified and directed.

Taking down carefully old unserviceable existing oil immersed star delta motor starter, 150 HP/100HP , complete all as specified and directed.

Taking down carefully old unserviceable existing oil immersed star delta motor starter, 40 HP/30HP , complete all as specified and directed.

Taking down carefully old unserviceable existing oil immersed star delta motor starter, 10 HP/12.5HP/20 HP , complete all as specified and directed.

Taking down carefully old unserviceable existing DOL motor starter 05 HP , complete all as specified and directed.

Taking down carefully old unserviceable existing flat three core 16 sqmm, PVC insulated and PVC seathed industrial cable, 1100 Volts, complete all as specified and directed.

Taking down carefully old unserviceable existing filter bed valve and back wash valve of size 200mm dia , complete all as specified and directed.

Taking down carefully old unserviceable existing Chlorine dosing system , complete all as specified and directed.

Supplying, laying, jointing and testing (including diversion/change of route) for galvanised steel tubing 150mm bore, ISI marked, 'Medium grade' with all fitting such as bends, elbows, tees, short pieces, union, etc., and laid in trenches complete all as specified and as directed.

Supplying, laying, jointing and testing (including diversion/change of route) for galvanised steel tubing 100mm bore, ISI marked, 'Medium grade' with all fitting such as bends, elbows, tees, short pieces, union, etc., and laid in trenches complete all as specified and as directed.

Supplying, laying, jointing and testing (including diversion/change of route) for galvanised steel tubing 80mm bore, ISI marked, 'Medium grade' with all fitting such as bends, elbows, tees, short pieces, union, etc., and laid in trenches complete all as specified and as directed.

Supplying, laying, jointing and testing (including diversion/change of route) for galvanised steel tubing 50mm bore, ISI marked, 'Medium grade' with all fitting such as bends, elbows, tees, short pieces, union, etc., and laid in trenches complete all as specified and as directed.

Supplying, laying, jointing and testing (including diversion/change of route) for galvanised steel tubing 40mm bore, ISI marked, 'Medium grade' with all fitting such as bends, elbows, tees, short pieces, union, etc., and laid in trenches complete all as specified and as directed.

Supplying, laying, jointing and testing (including diversion/change of route) for galvanised steel tubing 25mm bore, ISI marked, 'Medium grade' with all fitting such as bends, elbows, tees, short pieces, union, etc., and laid in trenches complete all as specified and as directed.

Supplying, laying, jointing and testing (including diversion/change of route) for galvanised steel tubing 20mm bore, ISI marked, 'Medium grade' with all fitting such as bends, elbows, tees, short pieces, union, etc., and laid in trenches complete all as specified and as directed.

Supplying, laying, jointing and testing (including diversion/change of route) for galvanised steel tubing 15mm bore, ISI marked, 'Medium grade' with all fitting such as bends, elbows, tees, short pieces, union, etc., and laid in trenches complete all as specified and as directed. Note- (Excavation and earth work for serial item No. 15.00 to 22.00 will be measured and paid for separately.)

Supplying and fixing cast iron sluice valve, heavy duty, Class PN 1.6 with flanged ends, 150 mm nominal bore, ISI marked, any pattern with cast iron head wheels and stainless spindle, conforming to IS 14846 of 2000 including jointing material flanged joint rubber/ fibre board gasket 6mm thick nuts, mild steel bolt , washer, etc complete complete all as specified and as directed.

Supplying and fixing cast iron sluice valve, heavy duty, Class PN 1.6 with flanged ends, 100 mm nominal bore, ISI marked, any pattern with cast iron head wheels and stainless spindle, conforming to IS 14846 of 2000 including jointing material flanged joint rubber/ fibre board gasket 6mm thick nuts, mild steel bolt , washer, etc complete complete all as specified and as directed.

Supplying and fixing cast iron sluice valve, heavy duty, Class PN 1.6 with flanged ends, 80 mm nominal bore, ISI marked, any pattern with cast iron head wheels and stainless spindle, conforming to IS 14846 of 2000 including jointing material flanged joint rubber/ fibre board gasket 6mm thick nuts, mild steel bolt , washer, etc complete complete all as specified and as directed.

Supplying and fixing cast iron sluice valve, heavy duty, Class PN 1.6 with flanged ends, 50 mm nominal bore, ISI marked, any pattern with cast iron head wheels and stainless spindle, conforming to IS 14846 of 2000 including jointing material flanged joint rubber/ fibre board gasket 6mm thick nuts, mild steel bolt , washer, etc complete complete all as specified and as directed.

Supply and fixing of gun metal gate valve, painted finish, with forged brass spindle and iron wheel head, screwed both ends internally ISI marked, Class-2, for iron pipe of size 40mm bore complete all as specified and as directed.

Supply and fixing of gun metal gate valve, painted finish, with forged brass spindle and iron wheel head, screwed both ends internally ISI marked, Class-2, for iron pipe of size 25mm bore complete all as specified and as directed.

Supply and fixing of gun metal gate valve, painted finish, with forged brass spindle and iron wheel head, screwed both ends internally ISI marked, Class-2, for iron pipe of size 20mm bore complete all as specified and as directed.

Supply and fixing of gun metal gate valve, painted finish, with forged brass spindle and iron wheel head, screwed both ends internally ISI marked, Class-2, for iron pipe of size 15mm bore complete all as specified and as directed.

Material and labour for brick masonry valve pit nominal size 1.00 m x 1.00 m x 1.00 m with one brick thick wall using sub class 'B' brick in cement mortar 1:6 over 20 cm thick PCC 1:4:8 type D-2 base with 15 cm off set on all sides including plastering of internal surfaces and exposed surfaces with 15 mm thick plastering in cement mortarf 1:4 two coat of white wash, covers & locking arrangement all as shown on TD drawings No CESZ/TD-1081/2011, complete all as specified and as directed. Note- TD drawing for valve pit is avaliable in HQ 133 and contractor can check the same before quoating rate.

Supply and fixing of MCCB's of capacity 400 Amps, 4 pole, 415V, 36KA with adjustable microprocessor release in the existing LT panel complete all as specified and directed.

Supply and fixing of MCCB's of capacity 315 Amps, 4 pole, 415V, 36KA with adjustable microprocessor release in the existing LT panel complete all as specified and directed.

Supply and fixing of MCCB's of capacity 160 Amps, 4 pole, 415V, 36KA with adjustable microprocessor release in the existing LT panel complete all as specified and directed.

Supply and fixing of MCCB's of capacity 100 Amps, 4 pole, 415V, 36KA with adjustable microprocessor release in the existing LT panel complete all as specified and directed.

Supply and fixing of MCCB's of capacity 63 Amps, 4 pole, 415V, 36KA with adjustable microprocessor release in the existing LT panel complete all as specified and directed.

Supply and fixing in repalcement of single phase preventer complete all as specified and directed.

Supply and fixing in repalcement of digital voltmeter 0-500V in the existing LT panel board complete all as specified and directed.

Supply and fixing in repalcement of indicator lamp R-Y-B (Set of three) in the existing LT panel board, complete all as specified and directed.

Supply and fixing in repair of 50 Sqmm, single core HRFR PVC insulated industrial grade copper conductor(unseathed) flexible cable, 1100 Volts conforming to IS :694 all as specified and directed.

Supply and fixing manually operated oil immersed star delta motor starter, 150 HP, three phase with double contact strip wound overload coil and cable entry box, complete all as specified and directed

All as per srl item No. 43 here-in-before but of 100 HP complete all as specified and directed.

All as per srl item No. 43 here-in-before but of 40 HP complete all as specified and directed.

All as per srl item No. 43 here-in-before but of 20 HP complete all as specified and directed.

Supply and fixing DOL starter upto 5 HP with and including sheet metal enclosure complete all as specified and directed.

Supply and fixing PVC submersible flat three core 16 sqmm, PVC insulated and PVC seathed industrial cable, 1100 Volts confirming to IS:694 for submersible pumpset , complete all as specified and directed

Material and labour for sluice valve of cast iron both ends flanged with rubber insertion and drilled of size 200mm dia and IS 14846 with pressure rating of PN 1.6 with brass alloy spindle and iron wheel head with nuts, bolts and washers of suitable size for filter bed valve connected with iron rod with suitable wheel rod , complete all as specified and directed

Supply and fixing PVC insulated, PVC sheathed, Multistranded copper conductor 1100V, 3 core, 70 sqmm complete including taking down unserviceable cable complete all as specified and directed.

Supply, installation, testing and commissioning of electric driven 100 HP centrifugal pumpset suitable for minimum discharge 47.5 LPS at 95 mtr minimum head with 3 phase, 415 volts, 50 Hz, AC induction motor of 1480 RPM including safety device and low/high voltage cutoff relay, including foundation as per manufacturer's design and electric connection with suitable size PVC insulated copper conductor cable drawing through and including flexible conduit from main control panel to starter and starter to motor including thimble of suitable size, and all necessary connection for suction and delivery pipes and all holding arrangements, complete all as specified and directed

Supply, installation, testing and commissioning of chemical dosing system plunger type suitable to inject solution up to 25 LPH comprising dosing pump coupled with 3 phase electric motor of capacity 0.5 HP, 1440 RPM assembly with agitator in one motor, agitator with SS sweep blade duly FRP coated, FRP tank 150 Ltr capacity, complete unit mounted on heavy duty MS fabricated frame duly anticorrosive plant complete with chemical grade PVC NRV, complete all as specified and directed

Excavation in trenches in soft/loose soil not exceeding 1.50 metre wide and not exceeding 1.50 metre deep for laying water main pipe/ cables etc., getting out and forming bottom surface to required gradient, complete all as specified and as directed.

Returning, filling in, of soft/ loose soil, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick each complete all as specified and as directed.

Removing excavated materials not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point, complete all as specified and as directed.

Note:- Amount of credit of Rs.1,68,290.00 for retrieved materials as mentioned in Schedule of Credit Page No.23 of tender documents in pdf form which will be deducted offline while acceptance of tender.

M/S ASHRAF CONSTRUCTIONS

M/S VALLEY ENTERPRISES

ALCO ENGINEERSPVT LTD

M/S MARVEL ELECTRICALS

RISING SUN ENGG WORKS

M/s Muzaffar Ahmad Mir