SPECIAL REPAIR FOR REPLACEMENT OF BER E/M INSTALLATION (2021-2022) AND ITS CONNECTED ITEMS AT ITR TECH AREA, PXE RESIDENTIAL AREA AND DEFENCE COLONY BALASORE UNDER GE (I) RnD CHANDIPUR

Amount

Supply, Installation, testing and commissioning of fire pump electrically driven, horizontal centrifugal end type single stage pump (confirming to IS- 12469 :1988) in standard construction bronze impeller (having Suction x delivery pipe size as per OEM standard ) shaft and shaft sleeves coupled with suitable power rated TEFC squirrel cage induction motor (confirming to IS- 325) with CI Casing and Stainless steel shaft mounted on heavy duty bearings Suitable for continuous operation with 'range of operation' 0% to 150% of rated capacity for 440V, 3 Phase, 2900 RPM suitable for discharge of 2850 LPM at a total head of 90 Mtr. The pump set will be fixed on common base MS channel frame supported by anti vibration pads including necessary electric connection from starter to motor and making inlet /outlet pipe line connection using nuts, bolts, rubber gaskets etc and other required material for smooth function of pump sets complete all as specified and as directed. Note : (i) The quoted unit rates shall deemed to be included the Base Plate, coupling and coupling guard, gland packing, Necessary PCC in filling and foundation and plastering work etc. (ii) Anything missed out in the technical specifications but technically required for efficient working is deemed to be included in the quoted rates.

Supply, installation testing and commissioning of horizontal centrifugal end suction type jockey pump in standard construction having bronze impeller suitable suction and delivery pipe size coupled with suitable TEFC squirrel cage induction motor 3 phase, 415 volts, 50 Hz, 2900 rpm with suitable capacity as OEM standard mounted on a common base plate with coupling guard suitable for discharge of 180 LPM at total head of 90 Mtr. The pump set will be fixed on common base MS channel frame supported by anti vibration pads including necessary electric connection from starter to motor and making inlet /outlet pipe line connection using nuts,bolts,rubber gaskets etc and other required material for smooth function of pump sets complete all as specified and as directed. Note : (i) The quoted unit rates shall deemed to be included the Base Plate, coupling and coupling guard, gland packing, Necessary PCC in filling and foundation and plastering work etc. (ii) Anything missed out in the technical specifications but technically required for efficient working is deemed to be included in the quoted rates.

Supply, Installation, testing and commissioning of three phase horizontal centrifugal Self-priming Coupled Pump set having suitable suction and delivery pipe size coupled with suitable power rating, 1450 RPM, 3 phase, TEFC Sq. cage induction motor. Total Head Range 10-25 Mtr. Discharge Range 36 lps-7lps .The pump set will be fixed on common base MS channel frame supported by anti vibration pads including necessary electric connection with multi stranded coper conductor cable of size three core 6.0 Sqmm from starter to motor and making inlet /outlet pipe line connection using nuts, bolts, rubber gaskets etc and other required material for smooth function of pump sets complete all as specified and as directed. NOTE : Anything missed out in the technical specifications but technically required for efficient working is deemed to be included in the quoted rates.

S&F fire fighting Gun Metal (GM) landing valve (Hydrant valve single headed) with 80 mm NB flanged inlet brass spindle 63 mm dia female oblique outlet confirming to IS 5290 including rubber washer all as specified and directed.

Supply and fabrication of fire hydrant hose box of size 800mmx 600mmx 250mm made of 18 mm gauge MS sheet with 3 mm thick double door with 4 mm thick glasses and door frame made of 16 gauge MS sheet and 40mmx 40mm x 6mm thick iron angle support at 1.5 mtr height including grouting, painted FIRE with red outside and brilliant white inside box all as specified and directed. (Make – Zenith/ Jyoti/ Fire Shield).

S&F fire fighting canvas hose pipe, fire chief brand, cotton synthetic fibre, circular woven jacketed rubberized fabric reinforced rubber lined (RRL) , 35.7 Kg/cm² burst pressure and 22 Kg/cm² proof pressure, 63 mm dia of 15 mtr long with male and female GM coupling of 63 mm dia all as specified and directed. (Make – Zenith/ Jyoti/Fire Shield).

Supply, Installation, testing and lifting/lowering from borewell of three phase Vertical Water Cooled Submersible Pump set to give discharge range upto 81 m3/hr at an head of 80 Mtr 415V, TP suitable for 200/250 mm dia bore well (suitable for casing pipe size 200/250mm) complete all as specified and directed.

Supply and fix Yard hydrant post /Stand post with 80mm dia MS both flanged type of 2 meter height with provn of single outlet conforming to IS 908 all as specified and directed.

Supply and fix Yard hydrant post /Stand post monitor type with provn of single outlet of 2 meter height with operating pressure of 7 KG/Sqmm complete all as specified and directed.

Materials and labour for earthing as in repair complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, buried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connected with galvanised strip of size 32 x 6mm by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe 40 mm bore (medium grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (light grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15cm C/C both ways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I (2009) complete including testing on completion all as specified and as directed.

Supply, installation, testing and commissioning of Diesel engine driven Generator Set with acoustic cover to control the noise level as per CPCB/MoEF norms and emission standard as per CPCB IV+ norms, all of capacity 15 kVA/12kW with prime power rating at rated RPM as per ISO 8528, 3 phase, 415V, 1500 RPM, 4 wire, 50 cycles and power factor 0.8 lagging complete including necessary maintenance spares and set of tools as recommended by manufacturer. (i) Battery and leads.(ii) Residential Silencer (iii) First fill of lube oil (iv) AVM Pad (v) AMF Panel (vi) Fuel tank. (vii) Acoustic Enclosure A. Diesel Engine : The diesel engine shall be of capacity suitable for 12.5 KVA/10KW alternator, 1500 RPM, four stroke, multi-cylinder, radiator cooled, continuous duty with 10% overload capacity for one hour in 12 hours running confirming to IS: 10001/10002 and consisting of following:- a) Radiator cooled b) Electrical Starter Motor 12 V DC c) Maintenance free fully charged 12 V battery of suitable AH rating d) Battery Charging Alternator e) Fuel System with electronic class A1 governer f) Spin-on lube oil filter g) Spin-on duel fuel filter with water separator h) Turbocharged j) Residential type silencer k) Dry type air cleaner l) Shut-off coil with safeties for LLOP/HWT/Safety tripping m) Fly wheel and fly wheel housing n) First fill of lube oil & Coolant Make :- Kirloskar/Cummins/Greaves-Cotton B. Alternator : The Alternator shall be of capacity 15 KVA/ 10KW, 415 Volts, 0.8 PF (lag), 50 Hz, 3 phase, 4 wire system, suitable for operation at 1500 RPM, 21.0 rated amps confirming to IS: 13364 & IEC 60034-1. The alternator shall be brushless type, screen protected, revolving field, self excited, self regulated through an AVR, copper wound, having ±1.0% voltage regulation (max) in static conditions, continuous duty with 10% overload capacity for any one hour in 12 hours of operation. Make :- Kirloskar/Stamford/Crompton Greaves.

C. Mounting Arrangement: Engine and Alternator shall be mounted on a common MS fabricated base frame with Anti Vibration Mounting Pads. D. Fuel Tank: Fuel tank shall be of capacity suitable for 12 hours of operation with air vent, drain plug, level indicator, inlet and outlet connection & locking arrangement. E. Acoustic Enclosure: The entire generator, prime mover, fuel tank should be housed in a sound proof acoustic enclosure made of CRCA sheets with UV resistant powder coating and a structural/sheet metal base frame. The walls of the enclosure should be insulated with insulating material complying with IS-8183 specifications for better sound attenuation so as to comply with the 75 dB at 1 mtr sound levels specified by MOEF/CPCB. The enclosure should be provided with the following:- (i) Suitable doors on all sides to enter in to the container for easy maintenance. All doors shall be provided with locks and handles for opening/ closing doors. (ii) Suitable internal lighting to carry out easy inspection and maintenance. (iii) Air Inlet louvers designed to operate at rated load. (iv) Fluid drains for lube oil and fuel. (v) Fuel filling point with locking arrangement. (vi) Push button for emergency stop F. Tools :-One set of tools for maintenance as per OEM recommendation shall be provided. G. Dehumidifier of suitable capacity shall be provided to protect the alternator. Note: Following shall be deemed to be included in rate quoted:- (i) Concrete foundation for installation of DG set as per manufacturer's recommendations including necessary earth work etc in any type of soil. (ii) Install on the foundation, connecting fuel lines, cables etc.

Supply, installation, testing and commissioning of Diesel engine driven Generator Set with acoustic cover to control the noise level as per CPCB/MoEF norms and emission standard as per CPCB IV+ norms, all of capacity 20 kVA/16kW with prime power rating at rated RPM as per ISO 8528, 3 phase, 415V, 1500 RPM, 4 wire, 50 cycles and power factor 0.8 lagging complete including necessary maintenance spares and set of tools as recommended by manufacturer. (i) Battery and leads.(ii) Residential Silencer (iii) First fill of lube oil (iv) AVM Pad (v) AMF Panel (vi) Fuel tank. (vii) Acoustic Enclosure A. Diesel Engine : The diesel engine shall be of capacity suitable for 20 KVA/16KW alternator, 1500 RPM, four stroke, multi-cylinder, radiator cooled, continuous duty with 10% overload capacity for one hour in 12 hours running confirming to IS: 10001/10002 and consisting of following:- a) Radiator cooled b) Electrical Starter Motor 12 V DC c) Maintenance free fully charged 12 V battery of suitable AH rating d) Battery Charging Alternator e) Fuel System with electronic class A1 governer f) Spin-on lube oil filter g) Spin-on duel fuel filter with water separator h) Turbocharged j) Residential type silencer k) Dry type air cleaner l) Shut-off coil with safeties for LLOP/HWT/Safety tripping m) Fly wheel and fly wheel housing n) First fill of lube oil & Coolant B. Alternator : The Alternator shall be of capacity 20 KVA/ 16KW, 415 Volts, 0.8 PF (lag), 50 Hz, 3 phase, 4 wire system, suitable for operation at 1500 RPM, 28.0 rated amps confirming to IS: 13364 & IEC 60034-1. The alternator shall be brushless type, screen protected, revolving field, self excited, self regulated through an AVR, copper wound, having ±1.0% voltage regulation (max) in static conditions, continuous duty with 10% overload capacity for any one hour in 12 hours of operation. Make for (A&B) :- Kirloskar/Cummins/ Greaves- Cotton.

C. Mounting Arrangement: Engine and Alternator shall be mounted on a common MS fabricated base frame with Anti Vibration Mounting Pads D. Fuel Tank: Fuel tank shall be of capacity suitable for 12 hours of operation with air vent, drain plug, level indicator, inlet and outlet connection & locking arrangement E. Acoustic Enclosure: The entire generator, prime mover, fuel tank should be housed in a sound proof acoustic enclosure made of CRCA sheets with UV resistant powder coating and a structural/sheet metal base frame. The walls of the enclosure should be insulated with insulating material complying with IS-8183 specifications for better sound attenuation so as to comply with the 75 dB at 1 mtr sound levels specified by MOEF/CPCB. The enclosure should be provided with the following:- (i) Suitable doors on all sides to enter in to the container for easy maintenance. All doors shall be provided with locks and handles for opening/ closing doors. (ii) Suitable internal lighting to carry out easy inspection and maintenance. (iii) Air Inlet louvers designed to operate at rated load. (iv) Fluid drains for lube oil and fuel. (v) Fuel filling point with locking arrangement. (vi) Push button for emergency stop F. Tools :-One set of tools for maintenance as per OEM recommendation shall be provided. G. Dehumidifier of suitable capacity shall be provided to protect the alternator. Note: Following shall be deemed to be included in rate quoted:- (i) Concrete foundation for installation of DG set as per manufacturer's recommendations including necessary earth work etc in any type of soil. (ii) Install on the foundation, connecting fuel lines, cables etc.

Supply, installation, testing and commissioning of Diesel engine driven Generator Set with acoustic cover to control the noise level as per CPCB/MoEF norms and emission standard as per CPCB IV+ norms, all of capacity 25 kVA/20kW with prime power rating at rated RPM as per ISO 8528, 3 phase, 415V, 1500 RPM, 4 wire, 50 cycles and power factor 0.8 lagging complete including necessary maintenance spares and set of tools as recommended by manufacturer. (i) Battery and leads.(ii) Residential Silencer (iii) First fill of lube oil (iv) AVM Pad (v) AMF Panel (vi) Fuel tank. (vii) Acoustic Enclosure A. Diesel Engine : The diesel engine shall be of capacity suitable for 25 KVA/20KW alternator, 1500 RPM, four stroke, multi-cylinder, radiator cooled, continuous duty with 10% overload capacity for one hour in 12 hours running confirming to IS: 10001/10002 and consisting of following:- a) Radiator cooled b) Electrical Starter Motor 12 V DC c) Maintenance free fully charged 12 V battery of suitable AH rating d) Battery Charging Alternator e) Fuel System with electronic class A1 governer f) Spin-on lube oil filter g) Spin-on duel fuel filter with water separator h) Turbocharged j) Residential type silencer k) Dry type air cleaner l) Shut-off coil with safeties for LLOP/HWT/Safety tripping m) Fly wheel and fly wheel housing n) First fill of lube oil & Coolant Make :- Kirloskar/Cummins/Greaves-Cotton. B. Alternator : The Alternator shall be of capacity 25 KVA/ 20KW, 415 Volts, 0.8 PF (lag), 50 Hz, 3 phase, 4 wire system, suitable for operation at 1500 RPM, 34.8 rated amps confirming to IS: 13364 & IEC 60034-1. The alternator shall be brushless type, screen protected, revolving field, self excited, self regulated through an AVR, copper wound, having ±1.0% voltage regulation (max) in static conditions, continuous duty with 10% overload capacity for any one hour in 12 hours of operation. Make :- Kirloskar/Stamford/Crompton Greaves.

C. Mounting Arrangement: Engine and Alternator shall be mounted on a common MS fabricated base frame with Anti Vibration Mounting Pads D. Fuel Tank: Fuel tank shall be of capacity suitable for 12 hours of operation with air vent, drain plug, level indicator, inlet and outlet connection & locking arrangement E. Acoustic Enclosure: The entire generator, prime mover, fuel tank should be housed in a sound proof acoustic enclosure made of CRCA sheets with UV resistant powder coating and a structural/sheet metal base frame. The walls of the enclosure should be insulated with insulating material complying with IS-8183 specifications for better sound attenuation so as to comply with the 75 dB at 1 mtr sound levels specified by MOEF/CPCB. The enclosure should be provided with the following:- (i) Suitable doors on all sides to enter in to the container for easy maintenance. All doors shall be provided with locks and handles for opening/ closing doors. (ii) Suitable internal lighting to carry out easy inspection and maintenance. (iii) Air Inlet louvers designed to operate at rated load. (iv) Fluid drains for lube oil and fuel. (v) Fuel filling point with locking arrangement. (vi) Push button for emergency stop F. Tools :-One set of tools for maintenance as per OEM recommendation shall be provided. G. Dehumidifier of suitable capacity shall be provided to protect the alternator. Note: Following shall be deemed to be included in rate quoted:- (i) Concrete foundation for installation of DG set as per manufaturer's recommendations including necessary earth work etc in any type of soil. (ii) Install on the foundation, connecting fuel lines, cables etc.

Supply, installation, testing and commissioning of Diesel engine driven Generator Set with acoustic cover to control the noise level as per CPCB/MoEF norms and emission standard as per CPCB IV+ norms, all of capacity 30 kVA/24kW with prime power rating at rated RPM as per ISO 8528, 3 phase, 415V, 1500 RPM, 4 wire, 50 cycles and power factor 0.8 lagging complete including necessary maintenance spares and set of tools as recommended by manufacturer. (i) Battery and leads.(ii) Residential Silencer (iii) First fill of lube oil (iv) AVM Pad (v) AMF Panel (vi) Fuel tank. (vii) Acoustic Enclosure A. Diesel Engine : The diesel engine shall be of capacity suitable for 30 KVA/24KW alternator, 1500 RPM, four stroke, multi-cylinder, radiator cooled, continuous duty with 10% overload capacity for one hour in 12 hours running confirming to IS: 10001/10002 and consisting of following:- a) Radiator cooled b) Electrical Starter Motor 12 V DC c) Maintenance free fully charged 12 V battery of suitable AH rating d) Battery Charging Alternator e) Fuel System with electronic class A1 governer f) Spin-on lube oil filter g) Spin-on duel fuel filter with water separator h) Turbocharged j) Residential type silencer k) Dry type air cleaner l) Shut-off coil with safeties for LLOP/HWT/Safety tripping m) Fly wheel and fly wheel housing n) First fill of lube oil & Coolant Make :- Kirloskar/Cummins/Greaves-Cotton. B. Alternator : The Alternator shall be of capacity 30 KVA/ 24KW, 415 Volts, 0.8 PF (lag), 50 Hz, 3 phase, 4 wire system, suitable for operation at 1500 RPM, 41.7 rated amps confirming to IS: 13364 & IEC 60034-1. The alternator shall be brushless type, screen protected, revolving field, self excited, self regulated through an AVR, copper wound, having ±1.0% voltage regulation (max) in static conditions, continuous duty with 10% overload capacity for any one hour in 12 hours of operation. Make :- Kirloskar/Stamford/Crompton Greaves.

C. Mounting Arrangement: Engine and Alternator shall be mounted on a common MS fabricated base frame with Anti Vibration Mounting Pads D. Fuel Tank: Fuel tank shall be of capacity suitable for 12 hours of operation with air vent, drain plug, level indicator, inlet and outlet connection & locking arrangement E. Acoustic Enclosure: The entire generator, prime mover, fuel tank should be housed in a sound proof acoustic enclosure made of CRCA sheets with UV resistant powder coating and a structural/sheet metal base frame. The walls of the enclosure should be insulated with insulating material complying with IS-8183 specifications for better sound attenuation so as to comply with the 75 dB at 1 mtr sound levels specified by MOEF/CPCB. The enclosure should be provided with the following:- (i) Suitable doors on all sides to enter in to the container for easy maintenance. All doors shall be provided with locks and handles for opening/ closing doors. (ii) Suitable internal lighting to carry out easy inspection and maintenance. (iii) Air Inlet louvers designed to operate at rated load. (iv) Fluid drains for lube oil and fuel. (v) Fuel filling point with locking arrangement. (vi) Push button for emergency stop F. Tools :-One set of tools for maintenance as per OEM recommendation shall be provided. G. Dehumidifier of suitable capacity shall be provided to protect the alternator. Note: Following shall be deemed to be included in rate quoted:- (i) Concrete foundation for installation of DG set as per manufacturer's recommendations including necessary earth work etc in any type of soil. (ii) Install on the foundation, connecting fuel lines, cables etc.

Supply, Installation, testing and commissioning of three phase horizontal centrifugal Self-priming Non-Clog Coupled Pump set having suitable suction and delivery pipe size coupled with suitable power rating, 1450 RPM, 3 phase, TEFC Sq. cage induction motor. Total Head Range 10-25 Mtr. Discharge Range 36 lps-7lps .The pump set will be fixed on common base MS channel frame supported by anti vibration pads including necessary electric connection with multi stranded coper conductor cable of size three core 6.0 Sqmm from starter to motor and making inlet /outlet pipe line connection using nuts, bolts, rubber gaskets etc and other required material for smooth function of pump sets complete all as specified and as directed. NOTE : Anything missed out in the technical specifications but technically required for efficient working is deemed to be included in the quoted rates.

Supply, Installation, testing and commissioning of three phase horizontal centrifugal Self-priming Non-Clog Coupled Pump set having suitable suction and delivery pipe size coupled with suitable power rating, 1450 RPM, 3 phase. Total Head Range 10-19 Mtr. Discharge Range 18 lps-2.5lps. The pump set will be fixed on common base MS channel frame supported by anti vibration pads including necessary electric connection with multi stranded coper conductor cable of size three core 6.0 Sqmm from starter to motor and making inlet /outlet pipe line connection using nuts, bolts, rubber gaskets etc and other required material for smooth function of pump sets complete all as specified and as directed. NOTE : Anything missed out in the technical specifications but technically required for efficient working is deemed to be included in the quoted rates.

Supply and connect submersible cable copper conductor PVC insulated over all sheathed flat flexible ISI marked 1100 volt grade complete of size 6.0 Sqmm, 3 core complete all as specified and directed.

Supply and Fix off load changeover switch, side handle type 415 V in sheet metal enclosure, 4pole of capacity 63 Amps complete all as specified and directed.

Supply, installation, testing and commissioning of Diesel engine driven Generator Set with acoustic cover to control the noise level as per CPCB/MoEF norms and emission standard as per CPCB IV+ norms, all of capacity 100 kVA/80kW with prime power rating at rated RPM as per ISO 8528, 3 phase, 415V, 1500 RPM, 4 wire, 50 cycles and power factor 0.8 lagging complete including necessary maintenance spares and set of tools as recommended by manufacturer. (i) Battery and leads.(ii) Residential Silencer (iii) First fill of lube oil (iv) AVM Pad (v) AMF Panel (vi) Fuel tank. (vii) Acoustic Enclosure A. Diesel Engine : The diesel engine shall be of capacity suitable for 100 KVA/80KW alternator, 1500 RPM, four stroke, multi-cylinder, radiator cooled, continuous duty with 10% overload capacity for one hour in 12 hours running confirming to IS: 10001/10002 and consisting of following:- a) Radiator cooled b) Electrical Starter Motor 24 V DC c) Maintenance free fully charged 24 V battery of min 150 AH rating d) Battery Charging Alternator e) Fuel System with electronic class A1 governer f) Spin-on lube oil filter g) Spin-on duel fuel filter with water separator h) Turbocharged j) Residential type silencer k) Dry type air cleaner l) Shut-off coil with safeties for LLOP/HWT/Safety tripping m) Fly wheel and fly wheel housing n) First fill of lube oil & Coolant Make :- Kirloskar/Cummins/Greaves-Cotton. B. Alternator : The Alternator shall be of capacity 100KVA/ 80KW, 415 Volts, 0.8 PF (lag), 50 Hz, 3 phase, 4 wire system, suitable for operation at 1500 RPM, 139.0 rated amps confirming to IS: 13364 & IEC 60034-1. The alternator shall be brushless type, screen protected, revolving field, self excited, self regulated through an AVR, copper wound, having ±1.0% voltage regulation (max) in static conditions, continuous duty with 10% overload capacity for any one hour in 12 hours of operation. Make :- Kirloskar/Stamford/ Crompton Greaves.

C. Mounting Arrangement: Engine and Alternator shall be mounted on a common MS fabricated base frame with Anti Vibration Mounting Pads D. Fuel Tank: Fuel tank shall be of capacity suitable for 12 hours of operation with air vent, drain plug, level indicator, inlet and outlet connection & locking arrangement E. Acoustic Enclosure: The entire generator, prime mover, fuel tank should be housed in a sound proof acoustic enclosure made of CRCA sheets with UV resistant powder coating and a structural/sheet metal base frame. The walls of the enclosure should be insulated with insulating material complying with IS-8183 specifications for better sound attenuation so as to comply with the 75 dB at 1 mtr sound levels specified by MOEF/CPCB. The enclosure should be provided with the following:- (i) Suitable doors on all sides to enter in to the container for easy maintenance. All doors shall be provided with locks and handles for opening/ closing doors. (ii) Suitable internal lighting to carry out easy inspection and maintenance. (iii) Air Inlet louvers designed to operate at rated load. (iv) Fluid drains for lube oil and fuel. (v) Fuel filling point with locking arrangement. (vi) Push button for emergency stop F. Tools :-One set of tools for maintenance as per OEM recommendation shall be provided. G. Dehumidifier of suitable capacity shall be provided to protect the alternator. Note: Following shall be deemed to be included in rate quoted:- (i) Concrete foundation for installation of DG set as per manufacturer's recommendations including necessary earth work etc in any type of soil. (ii) Install on the foundation, connecting fuel lines, cables etc.

Supply and Fix Electric water heater (gyser) storage type, capacity 25 litres ,240volts BEE 5 star rated complete with thermostate and all other accossories as specified and directed.

Supply and Installation of Exhaust fan Metal Body 450 mm sweep heavy duty 1400 RPM complete fixed to wall with suitable size bolts, grouted to wall including making good the damage and connecting up including provision of cable from connector to fan with three core flexible cable of size 24/0.2mm with copper conductor from ceiling rose to exhaust fan. Fixing of Louvers/shutters complete with frame all as specified and directed.

Supply and Fix Altoch Dosing system(model-ADS-I) and metering pump Electromagnetic type with suction and discharge tubing, spring loaded anti siphon valve with Injector Max Pressure 4 litre/hr with 4 kg back pressure complete Including 100 Litre FRP construction solution cum preparation cum setting tank with level gauge, lid ,inlet/outlet , drain connection and fitted with speed reducer, motor ans SS/PVC agitatordosing tank, agitator 120 Watt , 900 RPM with all accessories complete all as specified and directed.

Note for srl item No. 1.00 to 24.00:- The quoted rate also includes material and labour for repair/addition of any civil works as required at site for installation of above E/M items involved in this contract.

RANA ENTERPRISES

national engineering