Estimate for the construction of Distribution system of Kathgarh Distributary No. 1 off taking at RD 4100 m of Kathgarh Rising Main off taking at Burji 38810 Right Side of BDC Main canal(Part 3)

Amount

1 CHAPTER WATER SUPPLY NO. 28

Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect.

((a)) Earth work upto 1.5 m. Depth for

(ii) For Ordinary soil having gravel upto 40%

(15) Providing, Laying, fixing & jointing of ISI Marked H.D.P.E. Pipes as per ISI - 4984-1995 casting along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications.

(A) H.D.P.E of 10 kg pipe PE-80

(D) H.D.P.E pipe of 4 Kg PE-80

((i)) 180 mm o/d

((l)) 250 mm o/d

((m)) 280 mm o/d

((o)) 355 mm o/d

((e)) 110 mm o/d

((g)) 140 mm o/d

(27) Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer in-charge).

Class PN-1 as per ISI

(a) 80mm i/d Sluice Valves flanged

(b) 100mm i/d Sluice Valves flanged

(c) 150mm i/d Sluice Valves flanged

(d) 200mm i/d Sluice Valves flanged

(e) 250mm i/d Sluice Valves flanged

(g) 350mm i/d Sluice Valves flanged

(29) Providing & fixing Single air valve ISI Marked as per IS-14845 including jointing , cost of nut bolts & rubber insertion all carriages complete.

((d)) C.I Single air valve screwed (Size 50mm)

(66) Construction of masonary Sluice Valve Chamber excluding Sluice valve cover as per standard design & drawings of public health department.

(a) Size 0.6 m. x 0.6 m.

(b) Size 0.9 m. x 0.9 m.

MATERIALS

(M-1) Aggregates (average rate of all the quarries) Note:- Quarry wise aggregates rates attached at Annexure-I)

((d)) Fine Sand with FM not less than 1.6

BRICK WORK

(11.5) First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth

PLASTERING & POINTING

(15.7) 12.5 mm thick cement plaster 1:2

CONCRETE

(10.13) 1:2:4 cement concrete

(10-10.13-a(ii)) mixing by mechanical means using concrete mixer volumetric type

STEEL AND IRON WORK

(18.18) Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete

CENTRING AND SHUTTERING

(9.14) Shuttering for precast and plain or Reinforced concrete blocks, wall plates, bedplates, shelves etc.

Providing, Laying, fixing & jointing of U.P.V.C pipes of superior make @ 4 kgf pressure as per ISI-4985(ISI marked with the prior approval of Engineer in charge) along the trenches and laying the same in trenches to correct alignment and gradient, cutting, jointing and testing complete as per specifications(50 MM)

Providing, Laying, fixing & jointing of U.P.V.C pipes of superior make @ 4 kgf pressure as per ISI-4985(ISI marked with the prior approval of Engineer in charge) along the trenches and laying the same in trenches to correct alignment and gradient,cutting, jointing and testing complete as per specifications(75 MM)

Providing, Laying, fixing & jointing of U.P.V.C pipes of superior make @ 4 kgf pressure as per ISI-4985(ISI marked with the prior approval of Engineer in charge) along the trenches and laying the same in trenches to correct alignment and gradient, cutting, jointing and testing complete as per specifications(90 MM)

Providing, Laying, fixing & jointing of U.P.V.C pipes of superior make @ 4 kgf pressure as per ISI-4985(ISI marked with the prior approval of Engineer in charge) along the trenches and laying the same in trenches to correct alignment and gradient, cutting, jointing and testing complete as per specifications(110 MM)

Providing, Laying, fixing & jointing of U.P.V.C pipes of superior make @ 4 kgf pressure as per ISI-4985(ISI marked with the prior approval of Engineer in charge) along the trenches and laying the same in trenches to correct alignment and gradient, cutting, jointing and testing complete as per specifications(125 MM)

Providing, Laying, fixing & jointing of U.P.V.C pipes of superior make @ 4 kgf pressure as per ISI-4985(ISI marked with the prior approval of Engineer in charge) along the trenches and laying the same in trenches to correct alignment and gradient, cutting, jointing and testing complete as per specifications(160 MM)

Supply & fixing UPVC Long Bends of different angle of 6kgf pressure conforming to IS-codes with latest amendments if any at site of work including loading, unloading and rehandling if any complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge. 50 mm 90 Degree

Supply & fixing UPVC Long Bends of different angle of 6kgf pressure conforming to IS-codes with latest amendments if any at site of work including loading, unloading and rehandling if any complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge. 75 mm 90 Degree

Supply & fixing UPVC Long Bends of different angle of 6kgf pressure conforming to IS-codes with latest amendments if any at site of work including loading, unloading and rehandling if any complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge. 90 mm 90 Degree

Supply & fixing UPVC Long Bends of different angle of 6kgf pressure conforming to IS-codes with latest amendments if any at site of work including loading, unloading and rehandling if any complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge. 110 mm 90 Degree

Supply & fixing UPVC Long Bends of different angle of 6kgf pressure conforming to IS-codes with latest amendments if any at site of work including loading, unloading and rehandling if any complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge. 125 mm 90 Degree

Supply & fixing UPVC Long Bends of different angle of 6kgf pressure conforming to IS-codes with latest amendments if any at site of work including loading, unloading and rehandling if any complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge. 160 mm 90 Degree

Providing & fixing Alpha Valve including carriage, rehandling, loading, unloading, testing, etc. complete in all respect as per PWD specifications or instructions of the engineer in charge.50 MM

Providing & fixing Alpha Valve including carriage, rehandling, loading, unloading, testing, etc. complete in all respect as per PWD specifications or instructions of the engineer in charge.75 MM

Providing & fixing Alpha Valve including carriage, rehandling, loading, unloading, testing, etc. complete in all respect as per PWD specifications or instructions of the engineer in charge.90 MM

Providing & fixing Alpha Valve including carriage, rehandling, loading, unloading, testing, etc. complete in all respect as per PWD specifications or instructions of the engineer in charge.110 MM

Providing & fixing Alpha Valve including carriage, rehandling, loading, unloading, testing, etc. complete in all respect as per PWD specifications or instructions of the engineer in charge.125 MM

Providing & fixing Alpha Valve including carriage, rehandling, loading, unloading, testing, etc. complete in all respect as per PWD specifications or instructions of the engineer in charge.160 MM

Supply and fixing Flange Tail End Point of 6kgf with M.S.flange including carriage, rehandling, loading , unloading , testing etc. complete in all respects as per PWD specifications or instructions of the Engineer-in-charge. 80 MM

Supply and fixing Flange Tail End Point of 6kgf with M.S.flange including carriage, rehandling, loading , unloading , testing etc. complete in all respects as per PWD specifications or instructions of the Engineer-in-charge. 100 MM

Supply and fixing Flange Tail End Point of 6kgf with M.S.flange including carriage, rehandling, loading , unloading , testing etc. complete in all respects as per PWD specifications or instructions of the Engineer-in-charge. 150 MM

Supply and fixing Flange Tail End Point of 6kgf with M.S.flange including carriage, rehandling, loading , unloading , testing etc. complete in all respects as per PWD specifications or instructions of the Engineer-in-charge. 200 MM

Supply and fixing Flange Tail End Point of 6kgf with M.S.flange including carriage, rehandling, loading , unloading , testing etc. complete in all respects as per PWD specifications or instructions of the Engineer-in-charge. 250 MM

Supply and fixing Flange Tail End Point of 6kgf with M.S.flange including carriage, rehandling, loading , unloading , testing etc. complete in all respects as per PWD specifications or instructions of the Engineer-in-charge. 350 MM

Supply & fixing of UPVC Equal-Tee of 6 kg/cm2 pressure conforming to IS-codes with latest amendments if any at site of work. including carriage, rehandling, loading , unloading , testing etc. complete in all respects as per PWD specifications or instructions of the Engineer-in-charge50x50x50 mm.

Supply & fixing of UPVC Equal-Tee of 6 kg/cm2 pressure conforming to IS-codes with latest amendments if any at site of work. including carriage, rehandling, loading , unloading , testing etc. complete in all respects as per PWD specifications or instructions of the Engineer-in-charge75x75x75 mm.

Supply & fixing of UPVC Equal-Tee of 6 kg/cm2 pressure conforming to IS-codes with latest amendments if any at site of work. including carriage, rehandling, loading , unloading , testing etc. complete in all respects as per PWD specifications or instructions of the Engineer-in-charge90x90x90 mm

Supply & fixing of UPVC Equal-Tee of 6 kg/cm2 pressure conforming to IS-codes with latest amendments if any at site of work. including carriage, rehandling, loading , unloading , testing etc. complete in all respects as per PWD specifications or instructions of the Engineer-in- charge110x110x110 mm

Supply & fixing of UPVC Equal-Tee of 6 kg/cm2 pressure conforming to IS-codes with latest amendments if any at site of work. including carriage, rehandling, loading , unloading , testing etc. complete in all respects as per PWD specifications or instructions of the Engineer-in- charge125x125x125 mm

Supply & fixing of UPVC Equal-Tee of 6 kg/cm2 pressure conforming to IS-codes with latest amendments if any at site of work. including carriage, rehandling, loading , unloading , testing etc. complete in all respects as per PWD specifications or instructions of the Engineer-in- charge160x160x160 mm

Providing & fixing UPVC Reducer/ Increaser of 6Kgf pressure conforming nto IS codes with latest amendments if any at site of work including loading, unloading and rehandling if any complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge.50x80 mm

Providing & fixing UPVC Reducer/ Increaser of 6Kgf pressure conforming nto IS codes with latest amendments if any at site of work including loading, unloading and rehandling if any complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge.110x90 mm

Providing & fixing UPVC Reducer/ Increaser of 6Kgf pressure conforming nto IS codes with latest amendments if any at site of work including loading, unloading and rehandling if any complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge75x90 mm

Providing & fixing UPVC Reducer/ Increaser of 6Kgf pressure conforming nto IS codes with latest amendments if any at site of work including loading, unloading and rehandling if any complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge.125x160 mm

Supply & fixing of Service Saddle M.S. Conforming to code with latest amendments if any at site including carriage, loading, unloading & rehandling complete in all respect as PWD specifications or instructions of the Engineer In Charge50 mm x 50 mm

Supply & fixing of Service Saddle M.S. Conforming to code with latest amendments if any at site including carriage, loading, unloading & rehandling complete in all respect as PWD specifications or instructions of the Engineer In Charge75 mm x 50 mm

Supply & fixing of Service Saddle M.S. Conforming to code with latest amendments if any at site including carriage, loading, unloading & rehandling complete in all respect as PWD specifications or instructions of the Engineer In Charge 90 mm x 50 mm

Supply & fixing of Service Saddle M.S. Conforming to code with latest amendments if any at site including carriage, loading, unloading & rehandling complete in all respect as PWD specifications or instructions of the Engineer In Charge 110 mm x 50 mm

Supply & fixing of Service Saddle M.S. Conforming to code with latest amendments if any at site including carriage, loading, unloading & rehandling complete in all respect as PWD specifications or instructions of the Engineer In Charge125 mm x 50 mm

Supply & fixing of Service Saddle M.S. Conforming to code with latest amendments if any at site including carriage, loading, unloading & rehandling complete in all respect as PWD specifications or instructions of the Engineer In Charge160 mm x 50 mm

Supply & fixing of Service Saddle M.S. Conforming to code with latest amendments if any at site including carriage, loading, unloading & rehandling complete in all respect as PWD specifications or instructions of the Engineer In Charge200 mm x 50 mm

Supply & fixing of Service Saddle M.S. Conforming to code with latest amendments if any at site including carriage, loading, unloading & rehandling complete in all respect as PWD specifications or instructions of the Engineer In Charge225 mm x 50 mm

Supply & fixing of Service Saddle M.S. Conforming to code with latest amendments if any at site including carriage, loading, unloading & rehandling complete in all respect as PWD specifications or instructions of the Engineer In Charge 355 mm x 50 mm

Supplying, fixing and jointing PVC /H.D.P.E pipe's specials complete as desired by Engineer-in-Charge. For pipe lines laid outside habitation & in the open area/ field 2% Extra will be taken for the respective i/d of pipe. (355 mm)

Supplying, fixing and jointing PVC /H.D.P.E pipe's specials complete as desired by Engineer-in-Charge. For pipe lines laid outside habitation & in the open area/ field 2% Extra will be taken for the respective i/d of pipe. (280 mm)

Supplying, fixing and jointing PVC /H.D.P.E pipe's specials complete as desired by Engineer-in-Charge. For pipe lines laid outside habitation & in the open area/ field 2% Extra will be taken for the respective i/d of pipe. (250 mm)

Supplying, fixing and jointing PVC /H.D.P.E pipe's specials complete as desired by Engineer-in-Charge. For pipe lines laid outside habitation & in the open area/ field 2% Extra will be taken for the respective i/d of pipe. (180 mm)

Supplying, fixing and jointing PVC /H.D.P.E pipe's specials complete as desired by Engineer-in-Charge. For pipe lines laid outside habitation & in the open area/ field 2% Extra will be taken for the respective i/d of pipe. (140 mm)

Supplying, fixing and jointing PVC /H.D.P.E pipe's specials complete as desired by Engineer-in-Charge. For pipe lines laid outside habitation & in the open area/ field 2% Extra will be taken for the respective i/d of pipe. (110 mm)

Supply and fixing of upvc Riser from pvc pipes for release of water at different outlet complete in all respect. (50 mm)

Supply and fixing of upvc Riser from pvc pipes for release of water at different outlet complete in all respect. (75 mm)

Supply and fixing of upvc Riser from pvc pipes for release of water at different outlet complete in all respect. (90 mm)

Supply and fixing of upvc Riser from pvc pipes for release of water at different outlet complete in all respect. (110 mm)

Supply and fixing of upvc Riser from pvc pipes for release of water at different outlet complete in all respect. (125 mm)

Supply and fixing of upvc Riser from pvc pipes for release of water at different outlet complete in all respect. (160 mm)

Deepak Kumar Beetan (BID ID -630356)

M/s NAVJIWAN BANSAL CONTRACTOR (BID ID -630151)

BHUPESH MITTAL CONTRACTOR (BID ID -629705)

MITTAL CONSTRUCTION COMPANY (BID ID -630166)

A TECH BUILDERS (BID ID -629907)

NARESH KUMAR DUGGAL (BID ID -630344)

M/S SANJEEV KUMAR (BID ID -630336)

HARNEK SINGH CONTRACTOR (BID ID -630364)