REPAIR MAINT AND PAINTING OF STEEL FURNITURE AT FAIZABAD MIL STN UNDER GE FAIZABAD

Amount

Notes applicable to Sl Item Nos 2.00 to 19.00:- (a) Removing existing unserviceable part and S&F following similar new part with & including all necessary welding or other fixing accessories as per MES pattern viz F/FD/DB/MAP series or Similar items complete all as directed by Engineer-in-Charge:- (b) Work shall be executed where the furniture exist in different User Units under GE Faizabad including BSO Furniture Yard as directed by Engineer-in-Charge

Table Office Officer Steel Drg No. FD-84/ 1003 or similar pattern:-

Legs, as per drg

Lock of drawer as per drg

Repairs to Drawer / shutter by replacing old u/s parts with new parts including tinkering / denting, welding etc all as shown on drg and as directed by Engr-in-Charge.

Stiffeners as per drg

PVC Shoes of standard quality all as per drg

Top 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by Engr-in-Charge /GE with 2 mm thick PVC edging fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete all as per drg.

Table Office Clerk Steel Drg No. FD-84 / 381 FD-1004 or similar pattern :-

Legs, as per drg

Lock of drawer as per drg

Repairs to Drawer / shutter by replacing old u/s parts with new parts including tinkering / denting, welding, etc all as shown on drg and as directed by Engr-in-Charge.

Stiffeners as per drg

PVC Shoes standard quality all as per drg

Top made of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by Engr-in-Charge /GE with 2 mm thick PVC edging fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete all as per drg.

Almirah Large Steel with shelves or 1/2 H 1/2S FD-351 / 1031/ 1033/TP/MAP or similar pattern :-

Brass/Steel 6 lever locks (Make-Godrej/Link/Hettich) as per drg

CP Handle as per drg

Legs as per drg

Repairs to door as specified including all necessary welding and replacement of unserviceable hinges

Repair/adjustment to existing shelf including all necessary welding and replacement of unserviceable supports

Shutter/door as per drg.

Locking device complete including rod

Shelf as per drg

CP Conduit pipe as per drg

Almirah Medium / Small Steel Drg No. FD-1032/1034/350FD-104(m) or similar pattern:-

Brass/Steel 6 lever locks (Make-Godrej/Link) as per drg

CP Handle as per drg

Legs as per drg

Repairs to door as specified including all necessary welding and replacement of unserviceable hinges

Repair/adjustment to existing shelf including all necessary welding and replacement of unserviceable supports

Locking device complete including rod

Shutter as per drg.

Shelf as per drg

CP Conduit pipe as per drg

Teapoy Verandah Drg No. FD-383/255 or similar pattern :-

Rubber/PVC shoe std quality as per drg

Top made of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by Engr-in-Charge /GE with 2 mm thick PVC edging fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete all as per drg.

Flat iron/conduit section complete assembled set to be provided as per drg.

Table 3'x2' with and w/o drawer& Table 3'x3' Drg No. FD-1008 / 1007/1009 or similar pattern :-

Top of size 3'x2' made of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by Engr-in-Charge/GE with 2 mm thick PVC edging fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.

Top of size 3'x3' made of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by Engr-in-Charge/GE with 2 mm thick PVC edging fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.

Repairs to Drawer by replacing old unserviceable parts with new parts including tinkering / denting and welding etc complete all as shown on drg and as directed by Engr-in-Charge

Rubber shoe of standard quality as per drg

Lock of drawer as per drg

Chair Steel Tubular with Arms Drg No. FD-75 (m) or similar pattern :-

Second class hard wood seat frame including cane work with two coats of synthetic enameled painting over a coat primer and putty, fitted in position by welding plate below the seat along with nut and bolt all as per drg.

Second class hard wood back frame including cane work with two coats of synthetic enameled painting over a coat primer and putty, fitted in position by welding plate below the seat along with nut and bolt all as per drg.

PVC Arms rest as directed by Engr-in-Charge

Rubber cap for conduit pipe as per drg

Chair Steel Tubular without Arms Drg No. FD-75 (m) or similar pattern :-

Second class hard wood seat frame including cane work with two coats of synthetic enameled painting over a coat primer and putty, fitted in position by welding plate below the seat along with nut and bolt all as per drg.

Second class hard wood back frame including cane work with two coats of synthetic enameled painting over a coat primer and putty, fitted in position by welding plate below the seat along with nut and bolt all as per drg.

Rubber cap for conduit pipe as per drg

Chair Verandah Drg No. FD/E6/MAP/11, FD/MAP-II/06, FD-359, 256 or similar pattern :-

Conduit section any member made of MS conduit pipe 16 gauge, 19mm dia as per drg.

Hard rubber shoes as per drg

Removing old unserviceable PVC frame from chair verandah map and S&F new seat and back frame of chair verandah map as specified and directed by Engr-in-Charge/GE

Removing old unserviceable cane from chair verandah & re-caning the chairs etc with approved new plastic cane 4 mm wide half round as per Matt Pattern of colour as approved by Emgr-in-Charge / GE.

Locker Steel Drg No. FD-1029/257/SKD-562 or similar pattern :-

CP handels as per drg

SS Hasp & Staple as per drg

Repairs to door/sides including replacement of hinges with welded joint

Shutter/door as per drg.

Legs as per drg

CP Conduit pipe as per drg

Shelf as per drg.

Brass / Steel 6 lever lock as per drg

Bottom Drawer complete as per drg.

Locking device complete including rod and other device

Charpoy IP Ply Top Drg No. FD/MAP-II/01 or similar pattern :-

Plywood top made of 12 mm thick BWP grade plywood as per existing shape and size with 8 Nos shunken nuts & bolts inclding drilling hole of appropriate size with elecrtic drill machine complete all as per drg and as directed by Engr-in-Charge.

Hard rubber shoe std quality as per drg

Welding work wherever required as directed by Engr-in-Charge

Chair Computer / Revolving / Executive Chair Drg No. FD/E6/ MAP/01 & TP or similar pattern

S&F new seat made of 12mm thick hot pressed plywood with fabric polyproplene / acrelic (range of fabrics not less than Rs 300/ RM) and mouled polyurethene foam 40 Density with PVC lipping all round complete all as shown on drawing.

All as per sl item No. 13.01 above but back complete.

PU Arms as per drg

Pedestal assy of standard quality complete all as per drg and directed.

S&F new twin wheel castors of required dia complete all as directed.

S&F new chrome free cylinder tube including fixing complete as per drg and as directed.

S&F new Locking lever assembely as shown on drawing complete and as directed.

S&F new superior quality cover cloth covering seat, back and arms for executive chair as shown on drg and directed by Engr-in-Charge.

Charpoy GI pipe ply top Drg No. FD-220 or similar pattern :-

Plywood top made of 12mm thick BWP grade plywood as per existing shape and size with 10 Nos sunken nuts & bolts,12 mm x 6mm thick 1st class teak wood beading half round along with the edges of the plywood and rounded at corners, fixed with fevicol and headless nails including drilling holes of appropriate size with elecrtic drill machine complete as per drg and as directed

Mild steel square tube 25mm dia and 20 cm long not less than 16 gauge thick each, welded to GI Charpoy pipe in four corners to support duly painted complete all as specified and directed.

S&F in replacement, stiffener made of 25 mm mild steel square tube 80 cm long not less than 16 gauge in thickness each, welded to GI Charpoy pipe complete all as specified and directed.

S&F in replacemet, long rail made of 32 mm dia Medium grade GI pipe ISI marked all as specified and shown on drg complete all as specified and directed.

Replacement of unserviceable short rail of charpoy GI pipe fabricated from old pipe obtained in replacement of long rail from Sl item No. 14.04 above including cutting threading etc as required and directed.

Replacement of unservicable legs of charpoy GI pipe fabricated from old pipe obtained in replacement of short rail from Sl item No. 14.05 above including cutting threading etc as required with bottom plug made of Sal wood and flat iron clamp 02 Nos for MNF set duly painted with two coats of black paint complete all as specified and directed.

S&F in replacement, GI 3 way elbow 32 mm dia complete all as specified and directed.

S&F in replacement, 32mm check nut complete all as specified and directed.

Removing existing old unserviceable Nylon newar from Charpoy GI Pipe, tightening of loose components of charpoy and S&F new top made of 12mm thick BWP grade plywood ISI marked of required size with 12 mm wide & 6mm thick 1st class teak wood half round beading fixed with fevicol and headless nails to all edges of plywood top rounded at corners. S&F 900mm long three stiffeners made out of MS flat iron 40x5 mm duly painted with two coats of black synthetic enamel paint over a coat of red oxide primer, fixed to long rails with two Nos semi circular top 6mm dia 65mm long bolts and nuts used for fixing plywood top including drilling holes in flat iron and rails. Plywood top to be fixed with 10 Nos semi circular top 6mm dia and 65mm long bolts & nuts with washers (03 Nos in each long rail & 02 Nos in each short rail) and 06 Nos semi circular top of 4 mm dia and 35 mm long bolts & nuts with washers to be used for fixing with stiffeners (02 Nos in each flat iron stiffener between long rails) complete all as directed by Engineer-in-Charge.

Charpoy IP folding Drg No. FD-388 (R) or similar pattern :-

Top made of 12mm thivk BWP grade plywood as per existing shape and size with 10 Nos sunken bolts & nuts with washers including drilling hole of appropriate size with the help of elecrtic drill machine complete all as per drg and as directed

Hard rubber shoe of standard quality as per drg.

Table Dinning OR A/ top Drg No. FD-165(M) or similar pattern

Top made of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly fixed with 1mm thick stainless steel sheet on table top complete all as specified and directed by Engr-in-Charge/GE.

Leg /Stiffener / short rail of MS 25mm size square hollow section of 1.6mm wall thickness complete all as specified and directed.

Long Rail / middle support complete all as shown on drg and directed.

Trestle Store Room Drg No. FD-86(M) or similar pattern

Taking out old unserviceable leg from Trestle store room (wooden) and S&F new 2nd class hard wood (SAL) leg of size 100x100mm, made to shape, including treating with two coats of creosote oil, complete all as shown on drawing and directed by Engineer in charge.

Taking out old unserviceable long rail from Trestle store room and S&F new 2nd class hard wood (SAL) long rail of size 2440x100x100mm, made to shape, including treating with two coats of creosote oil, complete all as shown on drawing and directed by Engineer in charge.

Taking out old unserviceable short rail from Trestle store room and S&F new 2nd class hardwood (SAL) short rail of size 600x100x100mm, made to shape, including treating with two coats of creosote oil, complete all as shown on drawing and directed by Engineer in charge.

Taking out old unserviceable long middle rail from Trestle store room and S&F new 2nd class hardwood (SAL) long middle rail of size 2040x100x100mm, made to shape, including treating with two coats of creosote oil complete all as shown on drawing and directed by Engineer in charge.

Repair to Chair Steel Padded with Arms (TP) or similar pattern:-

Taking out old unserviceable seat of Chair Steel Padded with arms and S&F new Seat of size 450 mm x 450 mm, made of 12mm thick hot pressed plywood with fabric polyproplene / acrelic (range of fabric not less than Rs 300/ RM) and mouled polyurethene foam 40 Density with PVC lipping all round complete all as shown on drawing.and directed by Engr-in- Charge.

All as per Sl item No. 18.01 above back of chair steel padded with arms.

Taking out old fabric from back and seat of the chair and S&F new fabric polyproplene / acrelic (range of fabrics not less than Rs 300/ RM) complete all as shown on drawing.and directed by Engr-in- Charge. Note: This work is separate from the works catered for against Sl Item Nos 18.01 & 18.02 above.

Taking out old unserviceable Padded arms hand rest of Chair Steel Padded with arm hand rest and S&F new Padded arm of size as shown on drawing and directed by Engr-in- Charge.

M&L for Gas Welding for joints of MS Pipe and flat iron frame including replacement of damaged parts all as shown on drawing and directed by Engr-in-Charge.

Table Centre Brass Leg with Glass Drg No. FD-375 or similar pattern:-

Taking out old broken / unserviceable glass top of any size and S&F new 10mm thick tinted / white glass top of size 1200x600mm for Table Centre Brass leg glass with rounded corners complete as shown on drawing and directed by Engr-in- Charge.

Taking out old broken leg (complete Set including entire frame) and S&F new brass leg (complete Set including entire frame) complete as shown on drawing and directed by Engr-in- Charge.

Taking out old broken / unserviceable Vaccum rubber shoes and S&F new Vaccum rubber shoes complete as shown on drawing and directed by Engr-in- Charge.

M&L for spot / run welding (not exc 25mm in length) in repair of any type of steel furniture articles including scraping, removing all loose particles from surfaces to be welded, grinding the welding where ever required to give smooth finish including touching up the welded portion with one coat of red oxide zinc chromate primer complete all as specified and directed. Note:- The welding required for fixing of new parts will not be measured against this item. The same shall be deemed to be included in the quoted rate of the new part.

Notes applicable to Sl Item Nos 21.01 to 21.13:- (a) M&L for preparing old painted internal / external surfaces of following steel furniture articles of MES pattern including newly replaced parts (if any) by removing peeled off paint, dirt, dust, dents etc, applying paint putty to make good / level the surfaces including applying a coat of red oxide primer wherever required and applying two coats of synthetic enamel paint of shade as approved by Engr-in-Charge/GE with the help of spray machine all as specified and directed by Engineer-in-Charge. (b) The work will be executed where the furniture exist in different User Units/Md accns under GE Faizabad including BSO's Furniture Yard as directed by Engineer-in-Charge

Almirah Steel Medium/Small Drg No. FD-1032

Almirah Steel Large Drg No. FD-67/351, 1031,

Book Case Steel Drg No. FD-1028

Charpoy IP Hard Top Drg No. MAP

Chair Steel Tubular with and w/o arms Drg No. FD-75 (m)

Chair Verandah Drg No. MAP/FD-256

Locker Steel Drg No. FD-1029/257/127

Table office officer steel Drg No. FD-1003

Table Clk steel Drg No. FD-1004

Teapoy Varandah Drg No. FD-383

Table 3x2 with and w/o drawer & Table 3'x3' Drg No. FD-1007/1008

Charpoy IP folding Drg No. FD-388 ®

Rack steel any type/Book Shelf open large Drg No. FD-1038 & 1023/69

Table dinning OR A/top Drg No. FD-165(M)

Chair Steel Padded with arms Drg No. TP

Trestle Store room iron Drg No.FD-1043

Trestle Store Room Drg No. FD-86M

M/s M K Sons Steel Industries

Yadav Builders

M/s Sagar Construction

BAJAJ CONSTRUCTION

M/S Amar Enterprises

R P construction company