Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.2 LAccepted-AOC NEAR OLD CCS JUNGLIGHAT SRI VIJAYA PURAM 744 103 | SRI VIJAYA PURAM | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744103 | ₹39.2 L Quoted ₹39.8 L | L1 | Accepted-AOC being first lowest |
| 2 | L2₹45.7 LRejected-Finance | ₹45.7 L | L2 | Rejected-Finance Not being L1 |
| 3 | L3₹46.8 LRejected-Finance | ₹46.8 L | L3 | Rejected-Finance Not being L1 |
| 4 | L4₹47.8 LRejected-Finance | ₹47.8 L | L4 | Rejected-Finance Not being L1 |
| 5 | L5₹49 LRejected-Finance BRICHGUNJ JUNGLIGHAT PO SRI VIJAYA PURAM 744103 | SRI VIJAYA PURAM | SOUTH ANDAMAN | ANDAMAN AND NICOBAR ISLANDS | 744103 | ₹49 L | L5 | Rejected-Finance Not being L1 |
| Sl No | Description | Qty | Unit | SHUSHANT ASSOCIATES L4 | M/s Karbhagam Sales Agency L8 | SMS Engineering Corporation L7 | Jas & Co L5 | M/s K Moorthi L3 | SKV Engineering L1 | M/s Prem Enterprise L6 | Reliance Sales Agency L2 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | M&L Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick,40mm bore medium grade (steel pipe) buried directly in ground (earth pit not less than 2.25m deep below GL) with top edge of the plate not less than 1.5m below normal GI, connected to galvanised earth strip 32 x 6 mm by means of bolts nuts check nuts and washers of galvanised iron or steel all as shown in electrical plate No.5 connected to earthing test point all as specified or indicated including testing on completion.
Note 1 : Rate shall be deemed to be inclusive of necessary excavation and earth work in any type of soil, removal of surplus soil to a distance not exceeding 50 M RCC covers slab and PCC chamber etc.
Note 2 : i) The unit rate shall also include for earth work in any type of soil, PCC (1:3:6) type C1 chamber, pre-cast RCC (1:2:4) type B-1 using 20mm graded stone aggregate cover 50mm thick reinforced with TMT bars 8mm dia @ 100mm c/c both ways, funnel with watering pipe 20mm dia medium grade, GI protection pipe light grade 40mm dia and wire mesh complete in addition to item No. 1(a) to (e) of preamble (notes) under sub-heading earthing, specified on Sl. Page Nos. 422 & 423 of SSR Part-II.
ii) Earthing lead and GI protection pipe beyond 7.5m will be measured and paid separately. | 4 | Each | 14,000 ₹56,000 | 12,650 ₹50,600 | 11,200 ₹44,800 | 15,000 ₹60,000 | 12,550 ₹50,200 | 12,000 ₹48,000 | 14,250 ₹57,000 | 12,250 ₹49,000 |
| 2.00 | Supply and laying of 32 x 6 mm GI earth strip laid in ducts/floors/wall Complete by removing old corroded strip including taking down old unserviceable one all as specified and directed. | 60 | RM | 250 ₹15,000 | 650 ₹39,000 | 400 ₹24,000 | 250 ₹15,000 | 230 ₹13,800 | 305 ₹18,300 | 300 ₹18,000 | 222 ₹13,320 |
| 3.00 | M&L for preparation of old painted surfaces of LT panels by cleaning/ rubbing with coarse cloth/ wire brushes to remove dust deposits, oil, grease and repainting by applying one spray coat of synthetic enamel paint without disturbing/ damaging the electrical net work system/ equipment including marking of details of capacity/ rating/ incoming/ outgoing in capital English alphabets of required size of letter with suitable coulor and Danger notice plate with radium stickering in RED coulor complete all as specified and as directed by Engineer in charge. | 30 | Each Job | 3,500 ₹1.1 L | 2,300 ₹69,000 | 9,800 ₹2.9 L | 400 ₹12,000 | 250 ₹7,500 | 400 ₹12,000 | 1,600 ₹48,000 | 245 ₹7,350 |
| 4.00 | M&L for fabrication/repair of LT panel door covers made out MS Sheet 3mm thick necessary folding jointing as suitable at site with existing panel board indoor/outdoor including necessary welding, hinges and supports including painting with two coats of synthetic enamel spray paint over a coat of redoxide primer complete all as specified and as directed.
Note : Transport charges for electric/gas welding machine from workshop to site and back shall be included in the rate quoted. | 10 | Sqm | 4,620 ₹46,200 | 9,000 ₹90,000 | 3,000 ₹30,000 | 2,900 ₹29,000 | 2,410 ₹24,100 | 2,000 ₹20,000 | 3,000 ₹30,000 | 2,350 ₹23,500 |
| 5.00 | Decarbonizing / cleaning complete LT panel boards/ pillar boxes of 415 / 380 / 230 Volts, 3 phase bus bar chamber with electrical connections complete, after removing the complete bus bar from the bus bar chamber, cleaning with CTC and ensure proper decarbonizing including new bakelite of adaquate size where ever required re-fixing the same after applying Becktrol (Red) solution to the spout, checking all the connections, tightening the nuts, bolts, thimbles for incoming and outgoing system complete including renewal of defective/ rusted bolts, nuts, insulators etc. complete all as specified and as directed by Engineer in charge. | 10 | Job | 7,400 ₹74,000 | 20,000 ₹2 L | 7,500 ₹75,000 | 7,600 ₹76,000 | 7,170 ₹71,700 | 12,000 ₹1.2 L | 5,400 ₹54,000 | 6,999 ₹69,990 |
| 6.00 | Dismantling Air Circuit Breaker 4pole/3pole, 630Amps to 2000Amps, 415 Volts, draw out/fixed type from location and repair /overhauling of spring drive mechanism, coil, auxiliary switch including setting of over load coil, no volt coil, tripping coil & apply multi grease for mechnical parts, cleaning and inspecting male and female contacts and apply dry graphite conductive sealant for contacts, checking of electrical wiring system, testing, and assembling all items/components parts to the respective position and testing complete all as specified and directed by Engineer-in-Charge.(Note : Spare parts will be measured and paid separately) | 19 | Job | 7,400 ₹1.4 L | 18,000 ₹3.4 L | 7,500 ₹1.4 L | 7,200 ₹1.4 L | 7,300 ₹1.4 L | 6,500 ₹1.2 L | 6,500 ₹1.2 L | 7,125 ₹1.4 L |
| 7.00Dismantling of Old Damaged/burnt spare parts from ACB and Supply and fixing in repair of following Spare parts suitable for -ACB 415V , 630 to 1600Amps Amps indoor type of Make : Havells/ Schneider/L&T/Legrand/C&S all as specified and directed by Engineer-in-Charge. | |||||||||||
| 7.01 | Shunt Trip Device | 12 | Each | 2,400 ₹28,800 | 3,150 ₹37,800 | 2,900 ₹34,800 | 3,000 ₹36,000 | 2,050 ₹24,600 | 2,510 ₹30,120 | 2,000 ₹24,000 | 2,000 ₹24,000 |
| 7.02 | Closing coil assembly | 12 | Each | 3,000 ₹36,000 | 3,500 ₹42,000 | 3,650 ₹43,800 | 3,000 ₹36,000 | 2,560 ₹30,720 | 3,510 ₹42,120 | 2,500 ₹30,000 | 2,500 ₹30,000 |
| 7.03 | Mismatch Prevention Device | 12 | Each | 2,200 ₹26,400 | 295 ₹3,540 | 300 ₹3,600 | 3,000 ₹36,000 | 2,560 ₹30,720 | 2,600 ₹31,200 | 2,650 ₹31,800 | 2,500 ₹30,000 |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
1 Jan 2026, 6:00 pmClosed
GE Haddo Sri Vijaya Puram
GARRISON ENGINEER HADDO MILITARY ENGINEER SERVICES HADDO SRI VIJAYA PURAM 744102
REPAIR AND MAINTENANCE OF LT PANELS, SWITCH GEAR, LT UG CABLES, SERVICE DUCTS, COPE BOXES, EOT CRANES AT WB AND RJ IN NSRY UNDER GE HADDO, SRI VIJAYA PURAM
2025_MES_744011_1
8209/E8
Open Tender
Civil Works
270 days
GE Haddo Sri Vijaya Puram
As per tender document
9 documents required · 9 mandatory
₹500
GE Haddo
₹80,000
Yes
17 Apr 2026
11 Dec 2025
8 Jan 2026
11 Dec 2025
1 Jan 2026
25 Dec 2025
12 Dec 2025 - 18 Dec 2025
Dismantling of Old Damaged/burnt spare parts from ACB and Supply and fixing in repair of following Spare parts suitable for -ACB 415V , 630 to 1600Amps Amps indoor type of Make : Havells/ Schneider/L&T/Legrand/C&S all as specified and directed by Engineer-in-Charge.
Shunt Trip Device
Closing coil assembly
Mismatch Prevention Device
Moving contacts assembly
Fixed Contact assembly
Auxialary Switch
Arc chut with hardware
Current Transformers 1600A/5A
Current Transformers 2000A/5A
S&F in repairs LED Indication Lamps 22.5mm dia R, Y, B 240 Volts DC/AC Neon type complete all as specified and as directed by Engineer in charge. [Make: Kaycee/ Teknik/ L&T/ Vaishnov/ AE/Binay]
All as per Item No. 10 herein before but cable of size 3½ core x 120sq.mm
All as per Item No. 10 herein before but cable of size 3½ core x 185sq.mm
All as per Item No. 10 herein before but cable of size 3½ core x 240sq.mm
All as per Item No. 10 herein before but cable of size 3½ core x 300sq.mm
Supply and laying HDPE DWC pipe of size 120mm (OD) x 103mm (ID) along with connected accessories like couplers, bends, end caps etc. for LT/ HT cable protection complete all as specified and as directed by engineer in charge. [Make: REX POLY EXTRUSION LTD / TIRUPATI PLASTOMATICS PVT LTD/ PRINCE/ JAIN IRRIGATION SYSTEMS LTD.]
M&L for mild steel framed brackets of angles, tees, plates, heavy duty hinges for welding of cope boxes/LT Panel boards with web and flanges cut to shape, drilled and countersunk for screw including bending with necessary welding works for angles/hinges if necessary, gusset plates, riveting, brackets including of painting with two coats of synthetic enamel spray paint over a coat of redoxide primer including dismantling existing brackets complete all as specified and as directed by Engineer in charge.
Disconnecting old unservieable / under rated LT UG cables of size 3.5 core 185 to 400 sqmm and draw out from the pipe or under grond or cable duct from power house to different feeders/ on Jetty/ at any other location including re-laying the same in trenches or on walls or in cable duct with necessary clamping where required all as specified and as directed by Engineer-in-Charge.
Material & labour for laying of chequered plates of any thickness by cutting / making in to the shape providing necessary angular supports and handles with 6 mm dia rod as per the site condition for cable trencehs of various sub-stations alongwith painting of one coat of synthetic enamel over a coat of two coats of redoxide all as specified and directed.
stage.html
html • 0.06 MB
technical_833156.pdf
techsummary_833156.pdf
finance_833156.pdf
BOQ Comparative Chart
xlsx
finsummary_833156.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.29 MB
8209Tender.pdf
Tender Documents • 1.31 MB
BOQ_833156.xls
BOQ • 0.34 MB
Download all tender documents and submit your bid