REPAIR/REPLACEMENT OF OLD VINTAGE WIRING, FITTINGS AND FLAME PROOF FITTINGS, FIXTURES AND CONNECTED ITEMS AT PERIMETER, CMPH, GUNJKHEDA, BHIM LINE, RA AND DA AT CAD PULGAON

Amount

Taking down from any height carefully concealed/ casing caping/ ERW pipe point wiring copper / aluminium (light / fan / scoket) complete/as required (with fittings such as switches ceiling rose, pendents, regulators sockets etc as required) and making good disturbed surface with exisitng specification all as specified and directed by Engr-in-Charge.

Point wiring for explosive sheds and other required bldgs with 1100 Volts grade PVC insulated single core FRLSH cable with strranded copper conductor of size 1.5 Sqmm drawn through and including ERW rigid stove enamelled steel conduit of suitable size but not point less than 19mm dia with and includings all accessories, bends,elbow,coupling etc and incl 1.5 Sqmm earth FRLSH copper wire etc complete all as specified.

Point wiring for explosive sheds and other required bldgs with 1100 Volts grade PVC insulated single core FRLSH cable with stranded copper conductor of size 2.5 Sqmm drawn through and including ERW rigid stove enamelled steel conduit of suitable size but not point less than 19mm dia with and includings all accessories, bends,elbow,coupling etc(and incl 2.5 Sqmm earth FRLSH copper wire etc complete all as specified.

Point wiring for explosive sheds and other required bldgs with 1100 Volts grade PVC insulated single core FRLS cable with stranded copper conductor of size 4 Sqmm drawn through and including ERW rigid stove enamelled steel conduit of suitable size but not point less than 19mm dia with and includings all accessories, bends,elbow,coupling etc and incl 4sqmm earth FRLSH copper wire etc complete all as specified.

Supply and fix in replacement LED tube light fitting. 1 x 16W / 20W flameproof type FLP-WP made of aluminium alloy LM6 complete with all accessories suitable for Gas/Vapour Group of IIA & IIB and Zone 1 & IP-65 Protection.

Supply and fix in replacement LED tube light fitting. 2 x 16W / 20W flameproof type FLP-WP made of aluminium alloy LM6 complete with all accessories suitable for Gas/Vapour Group of IIA & IIB and Zone 1 & IP-65 Protection.

Supply and fix in replacement flame proof rotary switch, in cast aluminium LM-6 suitable for 16A, single pole 250V with protection IP-65, equipement standard as per IS-2148/81 complete as specified and directed by Engr-in-Charge. Note. The rate quoted to be inclusive of brackets made of MS steel of suitable size for the above fittings.

Supply and fix in replacement Switch flame proof rotary type with termination box in LM6, 16A, double pole 250V with protection IP-65, equipement standard as per IS-2148/81 complete as specified and directed by Engr-in-Charge. Note. The rate quoted to be inclusive of brackets made of MS steel of suitable size for the above fittings.

Supply and fix in replacement Flame proof switch socket & plug combined in LM6 cable termination box in LM6, 16A, 250V, 2P+earth with protection IP-65, equipement standard as per IS-2148/81 complete all as specified and directed by Engr-in-Charge. Note. The rate quoted to be inclusive of brackets made of MS steel of suitable size for the above fittings.

M & L in replacement flame proof 3 way lighting junction box with plain cover in cast aluminium LM-6 material, with protection IP-65, equipement standard as per IS-2148/81 equipment standard , alongwith cable glands complete all as specified and directed. Note. The rate quoted to be inclusive of brackets made of MS steel of suitable size for the above fittings.

M & L in replacement flame proof 4 way lighting junction box with plain cover in cast aluminium LM-6 material, with protection IP-65, equipement standard as per IS-2148/81 equipment standard , alongwith cable glands complete all as specified and directed. Note. The rate quoted to be inclusive of brackets made of MS steel of suitable size for the above fittings.

S & F in replacement Flame proof - weather proof LED flood light fitting with protection IP-65 suitable for 100 Watt for indoor type complete all as specified and directed.

S & F in replacement Flame proof - weather proof LED flood light fitting with protection IP-65 suitable for 60 Watt for indoor type complete all as specified and directed.

M&L point wiring complete with 1.5sqmm single core unsheathed PVC insulated FRLSH cable 1100 V grade multistranded copper conductor of different code of ISI marked drawn through and incl PVC casing caping of suitable size with accessories ISI marked incl PVC insulated copper cable for earth of same type and sized connected to earth dolly including provision of PVC box of suitable size for mounting switches / sockets and fan regulators etc complete all as specified and directed for the following:- (a) One light point controlled by one switch one way

All as per item No 14 above… but One bell point controlled by one switch one way.

All as per item No 14 above… but One ceiling fan / exhaust fan / wall mounting fan point controlled by one switch one way

All as per item No 14 above… but One socket outlet three pin 5/6 Amps controlled by one switch on the same board.

All as per item No 14 above… but One switch socket outlet three pin 5 /6 Amps controlled by one switch on independent board.

M&L for point wiring with stranded copper conductor 2.5 Sqmm (nominal area), single core, multistranded, FRLSH , PVC insulated and unsheathed cabel 1100 volts grade, ISI marked drawn in and incl PVC casing caping of suitable size with accessories ISI marked incl PVC insulated copper cable for earth of same type and sized connected to earth dolly including provision of PVC box of suitable size for mounting complete all as specified and directed.

M&L for point wiring with stranded copper conductor 4 Sqmm (nominal area), single core, multistranded, FRLSH , PVC insulated and unsheathed cabel 1100 volts grade, ISI marked drawn in and incl PVC casing caping of suitable size with accessories ISI marked incl PVC insulated copper cable for earth of same type and sized connected to earth dolly including provision of PVC box of suitable size for mounting complete all as specified and directed.

M&L switch piano flush type single pole,one way, 5 Amps, 240 V complete all as specified and directed including taking down old U/S one.

S&F in replacement socket outlet 5/6 pin type,5 Amps, 240 V complete all as specified and directed including taking down old U/S one .

S&F in replacement switch socket combination 5/6 pin flush type (multipurpose type) 5 Amps, 240V complete all as specified and directed including taking down old U/S one. .

S&F in replacement switch socket combination flush type (multipurpose type) but 5A/16A, 5 in 1 15 Amps, 240V complete all as specified and directed including taking down old U/S one. .

S&F in replacement socket outlet Multipurpose type but 5A/15A flush type complete all as specified and directed including taking down old U/S one .

S&F in replacement Switch flush type 15/16A complete all as specified and directed including taking down old U/S one .

S&F in replacement bell switch piano flush type all as specified and directed

S&F in replacement Call bell ding dong electricaly operated all as specified and directed

S&F ceiling rose surface type with 3 terminals complete including taking down old U/S one .

S&F in replacement fan regulator electronic step type AC 240 Volts,50 Hz complete including taking down old U/S one .

S&F in replacement lamp holder,PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed including taking down old U/S one.

S and F in replacement LED tube lights fitting. 1x18/20W all as specified and as directed.

Supply and Fix in replacement to wall / pole of any height LED bldg security light 30 watt IP 65 including GI pipe suitable size bracket not less than 1 metre bend to shape with 2 clamps, nuts, bolts, washers and PVC 3 core ISI mark flexible wire from ceiling rose to fitting complete including taking down u/s lights all as specified and as directed.

Taking down carefully sub main wiring including batten/ conduit/ERW stove enameled metallic rigid conduit by unscrewing from wall, ceiling and making good surfaces to match with original status as specified and directed.

M&L sub main wiring alongwith earth wire with the following sizes of FRLSH PVC insulated copper conductor, single core cable in PVC Conduit 20mm complete all as sfecified and directed Note for sub main wiring :- 2 runs of wire and 1 run of earth wire will be measured as one unit i.e RM 2. Groove Cutting ,pinning and plastering of disturbed surface etc shall deemed to be included in the quoted rate.wiring 2 run of wire and1 run of earth wire (a) 2 run of 2.5sqmm copper cable and 1run of 2.5sqmm copper cable for earth wire

All as per item No 35 above but 2 run of 4sqmm copper cable and 1run of 4sqmm copper cable for earth wire

All as per item No 35 above but 2 run of 6sqmm copper cable and 1run of 6sqmm copper cable for earth wire

S&F in replacement of sheet steel enclosure with double door flush mounting ,MCB, DB, SPN, 4 ways,240 volt factory fitted rated bus bars,earth bar,neutral links complete incl. blanking plates as required & making good the disturbed surfaces.

S&F in replacement of sheet steel enclosure with double door flush mounting ,MCB, DB, SPN, 8 ways,240 volt factory fitted rated bus bars,earth bar,neutral links complete incl. blanking plates as required & making good the disturbed surfaces.

S&F in replacement of sheet steel enclosure with double door flush mounting ,MCB, DB, SPN, 12 ways,240 volt factory fitted rated bus bars,earth bar,neutral links complete incl. blanking plates as required & making good the disturbed surfaces.

S&F in replacement of sheet steel enclosure with Double door TPN 4 ways 440 volt factory fitted rated bus bars,earth bar,neutral links complete incl. blanking plates as required & making good the disturbed surfaces.

S&F in replacement sheet metal enclosure Single pole and neutral 240 V with a two pin and earth plug and socket complete with one single pole MCB of 20 Amp complete all as specified and directed

S and F in replacement of MCB TPN 63 Amps 415V ,50 Hz ,breaking capacity 10 KA," C " series all as directed. MAKE: Havells/Standard/Indoasian

S and F in replacement of MCB SPN 40 Amps 240V ,50 Hz, breaking capacity 10 KA," C " series all as directed.

S and F in replacement of MCB SPN 20 to 32Amps 240V ,50 Hz, breaking capacity 10 KA," C " series all as directed.

S&F MCB SP 6-32 Amps 240V ,50 Hz, breaking capacity 10 KA," C " series all as directed.

Supply & fix with replace of LED recessed mounted 2'X2' 36 Watt light along with fixture including taking down U/S old complete all as specified and direceted by EIC.

Supply & fix in replacement LED recessed mounted 1'X1' 18 Watt light along with fixture including taking down U/S old complete all as specified and direceted by EIC.

Supply only electronic Driver suitable for LED reccessed mounted 2'x2' 35 watt complete all as specified and directed

Supply only electronic Driver suitable for LED reccessed mounted 1'x1' 18 watt complete all as specified and directed

Supply and Fix in replacement ceiling 18 W Round Natural White 225 x 35 mm LED Panel Lights all as specified and as directed.

Material and labour for Submain wiring with three single core with flame Retardant and low smoke (FRLSH), copper conductor three run 2.5 sqmm (Nominal area ) including earth conductor of same size using approved colour coding as IS (Red, Black and Green for single phase circuit), unsheathed stranded copper cable 1100 volts grade ISI marked with TEC and FIA approved and including drawing into surface mounted ERW stove enameled metallic rigid conduit of suitable size with necessary fixing accessories and fittings such as Tees, bends,elbow,juction boxes, connecters, saddles, screws, rowel plug etc all as specified and directed. Note:- (i) Three run of 2.5 sqmm and one run of ERW steel conduit shall be measured as one length. (ii) All coduit pipe and coduit accessories shall be totally enclosed IP-65 protection and certified by CMRI Dhanbad. (iii) The complete electrical installation/wiring and all equipment and apparatus shall be got tested and certified as totally enclosed as suitable for use in explosive building on completion by the " Director Central Mining Research Institute (CMRI) Dhanjbad. The testing charges complete and arranging tools, plants, testing equipments et shall be born by the contractor.

Material and labour for Submain wiring with three single core with flame Retardant and low smoke (FRLSH), copper conductor three run 4 sqmm (Nominal area ) including earth conductor of same size using approved colour coding as IS (Red, Black and Green for single phase circuit), unsheathed stranded copper cable 1100 volts grade ISI marked with TEC and FIA approved and including drawing into surface mounted ERW stove enameled metallic rigid conduit of suitable size with necessary fixing accessories and fittings such as Tees, bends,elbow,juction boxes, connecters, saddles, screws, rowel plug etc all as specified and directed. Note:- (i) Three run of 4 sqmm and one run of ERW steel conduit shall be measured as one length. (ii) All coduit pipe and coduit accessories shall be totally enclosed IP-65 protection and certified by CMRI Dhanbad. (iii) The complete electrical installation/wiring and all equipment and apparatus shall be got tested and certified as totally enclosed as suitable for use in explosive building on completion by the " Director Central Mining Research Institute (CMRI) Dhanjbad. The testing charges complete and arranging tools, plants, testing equipments et shall be born by the contractor.

M&L flame proof distribution board SPN 8 way ( Totally enclosed dust and flame proof /jet proof ( IP-65 protection) including flame proof MCB SPN 32 Amp-01 NOS, SP 5 to 30 Amps-6 NOS 240 volts AC 10KA, Flame proof suitable for gas group I/IIA/IIB/IIC as per IS-2148 of 1981, with complete internal bus bar & wiring upto terminals.

Overhauling to ceiling fan of any size / sweep (i.e 1200/1400mm sweep) complete by rewinding with new copper winding wire of same gauge with approved quality of super enamelled copper winding wire including varnishing heating and replacement of defected / unserviceable spares such as bearing , Canopy -02 Nos , down rod, Hanging clamp, capacitor, bushes by cleaning / oiling / lubricant and re-assembling , testing for proper functioning complete all as specified and as directed. NOTE : Copper winding wire including varnishing heating and repalcement of defective split pin shall deemed to be included in the item rate.

All as per ser item No. 55………. but for exhaust fan of 225 to 450 mm sweep complete all as specified and directed by Engr-in-Charge

M and L for painting of ceiling fan 1200mm / 1400mm sweep after prepation of old painted surface with one coat of white synthetic enamelled paint complete all as specified and as directed.

M and L for painting of exhaust fan 225 to 450 sweep after prepation of old painted surface with one coat of black synthetic enamelled paint complete all as specified and as directed.

Supply only Metal Bush suitable for Ceiling fans complete

Supply only Capacitor 2.5 mfd suitable for Ceiling fan complete

Supply only Capacitor 4 mfd suitable for Exhaust fan complete

Supply only ball bearing suitable for Ceiling fan, as per sample complete all as specified and directed

Supply only ball bearing suitable for Exhuast fan, as per sample complete all as specified and directed

S&F in repair 'U' clamp with nut bolts, washers, split pins, rubber bush of ceiling fan complete all as specified and directed.

S&F in repair outer cover top and bottom of celing fan motor suitable for 1200mm fan complete all as specified and directed

Supply only fan blade adjustable type, suitable for Exhaust fan 225 to 450 mm complete all as specified and as directed.

Supply only fan blade adjustable type, suitable for ceiling fan 1200mm/1400mm complete all as specified and as directed.

Supply only stator suitable including connecting shaft suitable size for ceiling fan 1200mm/1400mm sweep complete all as specified and as directed.

Supply only canopy suitable for Ceiling fan complete all as specified and directed

Supply only down rod suitable for ceiling fan 1200mm/1400mm sweep suitable for ceiling fan complete

Supply and fixing multi strand three core 1.5 sqmm flexible copper conductor suitable for connection of ceiling fan from ceiling rose to ceiling fan complete.

Supply and fixing in replacement LED Serene reccess mounting 1'x4' feet CRCA housing ,1x 36 Watt white powder coated, with polymer diffuser complete with accessories

M&L for earthing complete with galvanised steel earth plate electrode 60cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25M deep below ground level) with top edge of the plate not less than 1.5 M below ground level connected with galvanised earth wire 4 mm dia by means of bolts nuts check nuts and washers of galvanised iron to earth test point all as specified or indicated including necessary excavation and earth work any type of soil PCC (1:3:6) watering funnel with wire mesh, GI tubing 20 mm medium grage for watering, 15mm bore light grade for GI Protection, Charcole and salt in requisited quantity complete all as specified and directed and all as shown in electrical plate No.3 of SSR part 1. Note: GI earth wire and protection pipe upto 7.5m in length shall be included in quoted rate.

Supply and fix in replacement of 12 watt LED Bulb warm white retrofit type complete all as specified and directed.

Supply and fix in replacement of 12 watt inverter LED Bulb retrofit type, 10 hrs Charging Time, 4 hrs Back-up Time Battery Capacity: 2200 mAh, rechargeable complete all as specified and directed.

Supply and fixing LED polymer bulk head with opaque polymer diffuser for optimum light with 10 LED bulb as per IP-65 protection including light driver holder connecting up with three core flexible copper conductor cable of suiteble size complete all as specified and directed.

Taking down the Solar water heater from the site after disconnecting the water connection, electric connection, opening the Solar water heater assembly and descalling with hydrochloride solution fixing of Solar water heater assembly including repair of brass flange, ring nuts, bolts, washers and other connected works preparation of steel surface of water by rubbing with emery paper, filling of putty to match the existing surface , paintng the surface by spray painting with one coat of synthetic enamel paint of approved make without damaging other parts / wiring of the machine and refixing the same in its original position of electric back up with thermostat specified and making cold/hot waterconnection GI pipes as required to make the system functional and connecting up with hot concealed water pipe line complete all as specified and directed .of the following capacity:- Note :- Spares and accessories will be measured and paid seperately. (a) 250 Ltrs capacity Solar water heater

All as per item No 77 above but 500 Ltrs capacity Solar water heater

Supply & fixing in repair of stop valve cast copper alloy screwed down high pressure with or without butterfly handle screwed down both end for iron pipe or for union 15mm dia ISI marked complete all as specified and directed.

Supply & fixing in repair of vent pipe made of GI pipe 15mm dia medium grade complete with all fitting ISI marked complete all as specified and directed.

Supply & fixing in repair GI tubing medium grade with all fittings and fixed to walls/ceiling/ floor or laid in trenches of 15 mm bore size for cold water pipe line complete all as specified and directed.

All as per Item No 81 but for 20mm bore size for hot water pipe line.

Supply & fixing in replacement insulated steel tank with inner protective coating for corosive resistance of 250 ltr capacity complete all as specified and directed.

Supply & fixing in replacement insulated steel tank with inner protective coating for corosive resistance of 500 ltr capacity complete all as specified and directed.

Supply & fixing in replacement Solar flat plate collector solar panel of 125 litr capacity,maxworking pressure 245 kpa,Abs material copper complete all as specified and directed.

Supply and fix in replacement LED decorative Post top/ Gate Light 40 watt IP 65 including suitable dia of base pipe not less than 1 feet inserted into ground/wall/gate piller for extra protection of light and 12mm Dia die steel bar caging for protaction opening on top fixed at gate with suitable size nuts, bolts washers etc in replacement all as specified and as directed.

Supply and fix in replacement LED Garden light 8 watt IP 66 made out of pressure die cast powder coated hoysing with PC diffuser including suitable dia of base pipe not less than 1 feet inserted into ground/wall/gate piller for extra protection of light and 12mm Dia die steel bar caging for protaction opening on top fixed at gate with suitable size nuts, bolts washers etc in replacement all as specified and as directed.

Supply and fix in replacement exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm all as specified and as directed.

Supply and fix in replacement exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm all as specified and as directed.

Supply and Fix in replacement 20W LED Warm White Flood focus light all as specified and as directed.

Supply and Fix in replacement 5W LED Warm White SPOT light all as specified and as directed.

Supply and Fix in replacement retrofit fluorescent wall lamp 15W made up of polycarbonate all as specified and as directed. Cat PartNo- Havells LHDL06160099 or equivalent.

M/s Dara Constructions, Pulgaon (BID ID -3197789)

SHUBHAM SALES (BID ID -3198047)

SHREE SIDDHIVINAYAK TRADERS (BID ID -3195769)

SHRI RANI SATI TRADERS (BID ID -3198181)

Chhabra Enterprises (BID ID -3197805)

I P Constructions (BID ID -3198288)

M/s Prakash Agencies (BID ID -3196006)

M/S JAI BHAWANI CONSTRUCTIONS (BID ID -3198226)

Bidder Name

SHRI RANI SATI TRADERS

SHREE SIDDHIVINAYAK TRADERS

M/s Dara Constructions, Pulgaon

M/S Maa Durga Constructions,Pulgaon

M/s Prakash Agencies

M/S JAI BHAWANI CONSTRUCTIONS

SHUBHAM SALES

Chhabra Enterprises

I P Constructions