PROVN OF SHED AT RSOI AT UMROI MIL STN UNDER GE UMROI

Amount

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft / loose soil complete all as specified and directed.

Excavation in trenches not exceeding 1.50 m wide and n exc. 1.5 m in depth; for foundation, etc, or for shaft, wells, cesspits, manholes, pier holes, cables, etc. not exceeding 10 sqm on plan and getting out in soft/loose soil complete all as specified and as directed.

M&L for PCC (1:4:8), type D-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed.

M&L for precast cement concrete block masonry 1:3:6 type C1 (20 mm graded stone aggregate) with solid blocks, exc 10 cm in width and setting in CM 1:6 complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n exc 25 cm in soft/loose soil all as specified and directed.

Removing surplus excavated materials (soils) upto a distance not exc. 50m and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified and directed.

Material and labour for hard core with broken stone or boulders of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rolled/ rammed to a true surface complete all as specified and directed.

Material and labour for 75 mm thick Plain cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in flooring, path, hard standing, etc. complete all as specified and as directed.

M&L for providing cement concrete type C2, 1:3:6 (40mm graded stone aggregate) in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and as directed.

S&F steel work in tubular vertical post including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and directed.

S&F steel work in tubular trusses and purlins including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and directed.

S&F Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of manglore pattern of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed . Note: Pattern of sheet shall be approved by GE.

S&F Pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of manglore pattern of an colour to suit for ridge/valley having having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed . Note: Pattern of sheet shall be approved by GE.

M&L for rendering 15 mm thick in CM (1:4) on fair faces of brick work or concrete surfaces including finishing even & smooth without using extra cement complete all as specified and directed.

M & L for rendering 15mm thick plaster in CM (1:4) on fair faces of brick work or on concrete surfaces of walls, chajjas,fins,facia etc up to any height in two layers (10mm thick 1st layer + 5mm thick finishing layer) finished even and smooth with out using extra cement mixed with liquid water proofing compound (for 5mm thick finishing layer only) 200 ml per 50 kg of cement by weight of cement or as per manufacturer's instruction complete all as specified and directed. Note: (a) Liquid water proofing compound will be measured and paid separately (b) The quoted rated by contractor shall include cost of scafolding upto 3 storey height of bldg.

Supply only liquid waterproofing compound

M&L for preparation of newly plastered surfaces of walls and applying two coats of distemper oil emulsion(any colour/tint) over a coat of primer including rubbing with emery paper to make the wall even and smooth complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm) complete all as specified and directed.

M&L for preparation of new steel surfaces of any description, not otherwise described, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces complete all as specified and directed .

M & L for reinforced cement concrete M-20 type B-1(Nominal Mix) (using 20mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M & L for reinforced cement concrete M-20 type B-1 (Nominal Mix) (using 20mm graded stone aggregate) as in columns, pillars, piers, posts and struts complete all as specified and directed.

M & L for reinforced cement concrete M-20 type B-1 (Nominal Mix) (using 20mm graded stone aggregate) as in beams, cantilevers, bressummers, lintel over 1.5m span complete all as specified and directed.

S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M & L for TMT bars 5mm dia. and over upto and including 10mm dia in stirrups, spacers and binders and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.

M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions square, rectangular or polygonal, rough finished complete all as specified and directed.

M & L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc, rough finished, flat complete all as specified and directed.

M & L for use and waste of form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter etc. with rough finished surfaces of concrete flat complete all as specified and as directed.

S&F Hollow PVC Wall Lining consisting of 5mm thick PVC sheet any colour inclusive of solvent cement and fixing at site on suitable frame work as per specifications and as per direction of Engr-in-charge.

S & F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre etc. complete all as specified and as directed.

S&F 10mm thick PVC insulation panels with EPS stuck to 1mm printed PVC sheet suitably placed in false ceiling grid made of GI frame work as per specification and drawing complete all as specified and as directed.

M&L for vitrified ceramic tiles double charged 10 mm thick (square/ rectangular) polished, area of each tiles excedding 0.42 sqm not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. Note: Screed bed shall be measured and paid seperately.

Material and labour for 15 mm thick screed bed or bedding layer of cement mortar in CM (1:6) for laying of floor tiles complete all as specified and directed.

Supply and fixing of 12 mm thick toughened glass as in door/openable type fixed with pivot including all necessarry SS fitting and fixture arrangment like handle, clamp, Double action floor spring heavy duty, Centre Patch lock with key etc complete all as specified and directed

S&F 12 mm thick toughened glass as in partition wall of any height fixed with pivot including all necessarry SS fitting and fixture arrangment etc shall be include, complete all as specified and directed

M & L for Reinforced concrete pipes 300mm dia, class NP3, laid and jointed in trenches complete with collars etc complete all as specified and directed.

M&L for concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested in cement concrete 1:3:6 type C2 for 300 mm bore of pipe complete all as specified and directed.

Material and labour for concealed modular point wiring with 1.5 Sqmm PVC insulated and unsheathed multi stranded (FRLSH) flexible copper conductor cable in and including rigid PVC conduit concealed /PVC surface conduit with modular cover plate and sunken box of adequate size for one light or one fan point controlled by one switch including 1.5 Sqmm (FRLSH) PVC insulated and unsheathed multi stranded flexible copper conductor cable as earth wire(green colour) connecting to common earth dolly complete all as specified and directed. Notes: (i) The quoted rate shall deemed to be inclusive for cutting chases and making good the existing surfaces for complete concealed wiring. (ii) On RCC roof ceiling PVC conduit shall be provided on surfaces for fan, etc with proper fixing clips all as directed and rate for the same are deemed to be inclusive in the unit quoted rate.

All as per serial item No 37 here in before but for one 3 pin 5 Amp socket outlet on independent board.

All as per serial item No 37 here in before but for one 3 pin 5 Amp socket outlet on same board.

Material and labour for concealed modular point wiring with 4.0 sqmm PVC insulated and unsheathed multi stranded (FRLSH) flexible copper conductor cable drawn in and including rigid PVC concealed conduit medium grade of suitable size with modular cover plate and sunken box of adequate size with suitable thickness plastic laminated sheet cover for one 3 pin socket outlet 15 Amp on independent board including continuous 4.0 sqmm copper conductor cable (FRLSH) (multistranded) PVC insulated and unsheathed cable as earth wire connecting to common earth dolly complete all as specified and directed. (i) The quoted rate shall deemed to be inclusive for cutting chases and making good the existing surfaces for complete concealed wiring. (ii) On RCC roof ceiling PVC conduit shall be provided on surfaces for fan, etc with proper fixing clips all as directed and rate for the same are deemed to be inclusive in the unit quoted rate.

M&L for Modular cover plate with frame and Modular metal flush box 6 module complete all as specified and directed.

M&L for Modular cover plate with frame and Modular metal flush box 4 module complete all as specified and directed.

M&L for Modular cover plate with frame and Modular metal flush box 3 module complete all as specified and directed.

M&L for Modular cover plate with frame and Modular metal flush box 2 module complete all as specified and directed.

M&L for Modular cover plate with frame and Modular metal flush box 1 module complete all as specified and directed.

M&L for ceiling rose surface bakelite two to three terminal isolated body fixed on PVC round block complete all as specified and directed

M&L for Modular switch 6 Amp one way switch white complete all as specified and directed.

M&L for Modular socket 6 Amp 2/3 pin combined 2 module complete all as specified and directed.

M&L for Modular socket 6 Amp /16 Amp2/3 pin combined 2 module complete all as specified and directed.

M&L for Modular switch 16 Amp one way white complete all as specified and directed.

Supply and fixing 25 Watt warm white energy saving environmental friendly, long life, corrosion resistant, decorative recessed luminaries with PMMA diffuser and extruded aluminium housing complete all as specified and directed .

Supply and fixing MCCB DB 4 way vertical sheet metal enclosure suitable for fixing MCCB of appropriate capacity as incomer and SP for outgoing, 415 volts, 50 Hz, with IP-43 protection, double door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting complete all as specified and directed.

Supply and fixing MCB SPN DB 8 way double door, IP 43 protection, isolated neutral bar, insulated bus bar assembly, mechanical strength of IK09 complete all as specified and directed.

Supply and fixing RCBO with earth leakage, over load and short circuit protection, DP, 240 Volts, 32 Amps, 30 mA senstivity including taking down old one complete all as specified and as directed.

Supply and fixing MCBs SPN, 6 to 32 Amps with 10 KA breaking capacity 'C' series confirming to IS/IEC 60898-1 (ISI marked), complete all as specified and directed.

Supply and fixing for MCBs SP, 6 to 32 Amps with 10 KA breaking capacity of 'C' series confirming to IS/IEC 60898-1 (ISI marked) complete all as specified and directed.

Supply and fixing of sub main wiring concealed with three run of single core (FRLSH) PVC insulated and unsheathed cable with copper conductor (Multi strand) having nominal area 6.0 Sqmm drawing into and including PVC non metallic rigid conduit of adequate size with proper colour coding and making electric connections, including cutting chases in brick wall, replastering and making good to match the existing specifications complete all as specified and directed. Note:- (i) The quoted rate shall deemed to be inclusive for cutting chases and making good the existing surfaces for complete concealed wiring. (ii) Three run of 6.00 sqmm single core (FRLSH) PVC insulated copper conductor cable and one run of PVC conduit of suitable size will be measured as one run.

Supply and fixing of sub main wiring concealed with three run of single core (FRLSH) PVC insulated and unsheathed cable with copper conductor (Multi strand) having nominal area 1.5 Sqmm drawing into and including PVC non metallic rigid conduit of adequate size with proper colour coding and making electric connections, including cutting chases in brick wall, replastering and making good to match the existing specifications complete all as specified and directed. Note :- (i) The quoted rate shall deemed to be inclusive for cutting chases and making good the existing surfaces for complete concealed wiring. (ii) Three run of 1.5 sqmm single core (FRLSH) PVC insulated copper conductor cable and one run of PVC conduit of suitable size will be measured as a one unit.

Material and labour for earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick, burried directly in ground (earth pit not less than 2.25 m below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to earth lead wire 4 mm dia by means of nuts, bolts and washers of galvanised iron and earth lead protected by galvanised iron pipe 15 mm bore (light grade) and connected to earth test point and including cement concrete pit in PCC (1:3:6) type C-1(using 20 mm graded aggregate) and pre-cast RCC cover slab of size 540 x 540 x 50 mm thick, reinforced with 8 mm dia TMT bars both ways and one handle for lifting made with 10 mm dia mild steel bar,funnel, wire mesh 20 mm bore galvanised (light grade) for watering, charcoal and salt in alternate layers including necessary execuation and earth works in any types of soil complete all as shown on Electrical plate No 3 of MES SSR-I complete all as specified and directed.

S&F for 32 mm dia GI tubing( light grade) bracket over all 1.2 m long with cutting as required and bend to shape with flat iron clamp of size 32 mm 2 Nos, suitable size of nut bolts and washers for fixing street light fittings on electric poles including taking down old unserviceable fully rusted existing one complete all as specified and directed.

S&F LED street light fittings in aluminium PDC housing, toughened glass cover, individual LEDs with secondary optics covered with IP66 protection of capacity 30W/35W complete all as specified and directed.

S&F Sleek design 18 W LED warm white ceiling light having wide voltage protection (160V-300V) and Surge protection complete all as specified and directed .

Supply and fixing wall fan complete with energy saving model 230V, 450 mm sweep complete all as specified and directed.

Supply, laying, testing & commissioning UG cable XLPE insulated,armoured heavy duty electric cable with aluminium conductor, 1100 Volts grade, cross section area 35 sq mm 3.5 core complete all as specified and directed

Supply & filling sand for cushioning to the under ground cable 8 cm before laying the electric cable and 15 cm after laying the cable complete all as specified and directed. Note: Punned thickness shall be measured and paid under this item.

M&L for common burnt clay building bricks (locally available best quality), sub-class ‘B’ designation 75 of size 230x115x75 mm to cover LT underground cables, laid dry and flat complete all as specified and directed.

Supply and fixing/laying GI tubing light grade of size 50 mm bore with all fittings laid in trenches or fixed to wall for protection of cable complete all as specified and directed.

M/s UB Enterprise (BID ID -3378074)

M/S Surendra Prasad and Associates (BID ID -3378402)

Lyngdohs Construction Company and Associates (BID ID -3378726)

S K ENTERPRISE (BID ID -3378147)

M/s SS Engineering (BID ID -3378490)

M/S U.K ENTERPRISE (BID ID -3378592)

S K DEY (BID ID -3378018)

S K Construction (BID ID -3377928)

SUNITA DEVI (BID ID -3378626)