Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
Closing Date
23 May 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Engine Division, Koraput
HINDUSTAN AERONAUTICS LIMITED Engine Division, Koraput, Sunabeda- 763002
VALVE WITH SEAT
7024
HAL/ED/DS/1-1/MAKE-II/2024/KSA
Works
Mig Complex- Engine Divn
₹0
Exempted
23 May 2024
12 Apr 2024
12 Apr 2024
23 May 2024
Compliance to technical requirement mentioned in the EOI ( Part I to VI) and DA has understood the clauses of MAKE-II procedure
HAL will not supply raw material for manufacturing and development of the items.Drawing for valve with seat is enclosed for reference.
Detail part of Valve Assembly (Part No:K4030.1900T) shall be manufactured with Original Russian Material CoC for Original Russian Material to be provided by supplier during supply of the item.
Material Grade: 4.1 For Detail Part No:K4030.687T(Valve of Seat):Metallic raw material grade should comply to grade Steel 95X18,TY14-1-3957-85 4.2 For Detail Part No:K4030.1890T( Valve): Metallic raw material grade Steel 95X18,TY14-1-3957-85 & rubber compound should comply to IRP-1287(Flurocarbon) ,TY38.005-1166-98 or equivalent type approved rubber compound.Rubber compound should be vulacanised with mating part as per drawing requirment. No other alternate material substitution is allowed.
Development agency shall submit the process sheet for manufacturing of Valve assembly (Part No:K4030.1900T) along with Bill of Materials for approval from Certification agency like RCMA through HAL. Additionally, DA shall submit the QAP(Quality Assurance Plan) for approval from DGAQA.Only after approval of documents by RCMA (KPT)/DGAQA and Kit of Parts inspection clearance from DGAQA ;manufacturing of Indigenous prototypes will be started.
Development Agency shall provide the Rubber Compund batch test certificate both for development batch as well as production,CoC for original Russian material,Dimension report and .Supplier shall provide the Rubber test specimen as well as metallic raw material specimen for each batch of supply for checking the properties like tensile,elongation,Shore-A hardness ,compression set (Rubber compound) & Chemical composition and mechanical properties ,Hardness for metallic raw material at HAL end.
Heat treatment and plating if applicable is at Development agency scope.
Development agency will do necessary procurement of raw material required for fabrication of prototypes, along with CoC traceable to OEM as per approved Bill of Material.
Development agency will fabricate the prototype (06 nos. of Valve Assembly;Part No:K4030.1900T) as per approved design / process document to meet the requirement.
Development agency will provide necessary support with respect to all aspects including resolution of technical problems, snags / defects / failure observed during the entire developmental activities.
Development agency will absorb any minor changes in design and fabrication, if encountered during technical requirement review, integration and certification of the Valve Assembly.
All activities done by Development agency will be as defined in the DDPMAS Ver 1.0, IMTAR-21Ver 1.0 & AFQMS and revision received during the process.
Development period (from issuance of Indigenization order to certification from airworthiness agency) will not be more than 02 months.
HAL will be the primary interface between Development agency and airworthiness agencies during all Indigenization process.
Vendor Audit shall be carried out by HAL (QC)/DGAQA (KPT) before starting the manufacturing of Prototypes of Valve Assembly as a part of capacity assessment.
Initially, development quantity as projected in Annexure-I shall be supplied to HAL for prove out of the items. The future quantity indicated in Annexure-I for bulk supply is tentative. Only after successful prove out of the items, Future bulk quantity at the time of ordering shall be ordered as per HAL requirement.
In case of rejection of parts during any qualification stage, vendor to provide the new part for undergoing the qualification tests.
Compliance to terms and conditions mentioned in Para 4 to 14 of Part-I(GENERAL INFORMATION & REQUIRMENTS) of this EOI
Compliance to Scope of Work mentioned in Para 15 of Part-II(TECHNICAL REQUIREMENTS) of this EOI
Compliance to Deliverables from DA to HAL as per Para 16 of Part-II (TECHNICAL REQUIREMENTS) of this EOI.
Compliance to the criteria mentioned in PART-III (Para 17 and 18 whichever applicable to DA) of this EOI for participation in the EOI. DA shall mandatorily submit the documentary evidence on the same for evaluation.
Compliance to terms and conditions mentioned in Para 19 of PART-IV (ASSESSMENT PARAMETERS & EVALUATION CRITERIA FOR EOI RESPONSES) of this EOI and submission of documents as per Para 20 to 25 of PART-V.
Compliance to terms and condition mentioned in PART-VI (MISCELLANEOUS) of this EOI.
Compliance to the technical specification requirement submitted by HAL for complete understanding and should adhere to it in the course of development. Any minor changes in the drawing/specification should also be agreed to the vendor during development stage
Compliance to the mandatory Indigenous content requirement as mentioned in para 6 of Part-I (GENERAL INFORMATION) of this EOI and proof thereof.
Under Make-II category, there will be no reimbursement of development cost/NRE for the project to DA. All cost pertaining to development of the item shall be borne by DA.
Compliance for the additional cost on test trial to be borne by DA in case of failure of the item during prototype development
Submission of quotation (Rough order magnitude) price for development quantity and projected future quantity as for format enclosed in APPENDIX-D
DA shall submit the approval status for DGAQA/CEMILAC and if not obtained then likelihood plan for obtaining the same.
DA shall have appropriate test equipment for trial & testing of unit at vendor’s work place/ on-site. In case the vendor do not own a test facility, the plan for progressing such testing at approved test facilities like HAL/DRDO labs/ NABL/Govt. accredited labs is to be indicated in the response.
DA shall provide a company details as per Appendix-B and associated documents in support of claim.
Life Cycle Management: DA should be in a position to provide product support in terms of maintenance materials and spares for a minimum period of 10 years. Even after the said mandatory period, vendor would be bound to give at least two years notice prior to closing the production line so as to enable a Life Time Buy of all spares before closure of the said production line. Further, all upgrades and modification required to be carried out on the equipment during its life cycle must be intimated.
DA has read and understood fully the terms and condition mentioned in this EOI and given the compliance statements and responses are complete in all respect.
DA has read and understood HAL Make-II Procedure as provided on HAL website and would abide by the procedure and conditions stated therein.
HAL/ED/DS/1-1/MAKE-II/2024/KSA
Expression of Interest for Spares development MAKE-II
APPENDIX-E
HAL's estimated amortised unit Price(INR) inclusive of Design & development cost excluding Tax
Expression of Interest for Spares development MAKE-II
PRICE BID APPENDIX-D
ROUGH ORDER MAGNITUDE PRICE
2024-25 (Qty: Nos)
Note: 1. Rough order magnitude price for development Quantity as well as Future Quantity to be given by Development Agency mandatorily.
2. Applicable HSN code and taxes to be furnished by Development Agency.
3. After successful certification of the item,production quantity shall be procured as per HAL requirement.
SIGNATURE
DESIGNATION
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
AppendixC.docx
TENDER_DOCUMENT • 0.02 MB
APPENDIXA.xlsx
TENDER_DOCUMENT • 0.01 MB
APPENDIXE.xls
TENDER_DOCUMENT • 0.02 MB
K40301900T.pdf
TENDER_DOCUMENT • 0.26 MB
K4030687T.pdf
TENDER_DOCUMENT • 0.26 MB
K40301890T.pdf
TENDER_DOCUMENT • 0.33 MB
AppendixB.docx
TENDER_DOCUMENT • 0.02 MB
EOI0001.pdf
TENDER_DOCUMENT • 1.51 MB
APPENDIXD1.xlsm
TENDER_DOCUMENT • 0.01 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .