Providing of street light poles with allied materials at Medical College main entrance road to Shiv Ram Jindal Boys Hostel at MAMC Agroha

Amount

Wiring main and sub mains in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in existing MS/PVC Conduit etc as required (HSR 23.5.6) 23.5.6.1 1 run of Size 1.50 Sqmm(1/1.40mm)

Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosures on the top etc. (but without charcoal or coke and salt) as required (HSR 24.1.1)

Extra for using salt and char coal/coke for pipe earth electrode as required (HSR 24.1.2)

Supplying and laying 25mm x 3mm G.I. strip at 0.5 metre below ground as strip earth electrode including soldering etc. as required (NS)

Supply and erection of Hot Dip Galvanized octagonal pole of 3mm thickness, with base plate including cost of nut and bolts , earthing studs, Integral Cable termination arrangement 5 mm thick Bakelite base plate on suitable welded MS/GI bracket 32 A four way connector 2 no 10 A SP MCB , end cover and all accessories as supplied by the manufacture including Providing RCC foundation of M25 grade (1 Cement:1 Stone aggregate: 2 Coarse sand) i/c excavation, steel reinforcement (Fe 500) @80 kg/cum of concrete contents, concrete cover 50mm, anchor bolts etc. over a bed of PCC 1:5:10 of required dimensions for octagonal poles of various heights as per following specifications complete in all respects and as per directions of Engineer-in-charge (HSR 24.4.8) 24.4.8.7 9 Metre Long pole with top dia 100 mm and bottom 200 mm with base plate of size 350 x 350 x 20 mm.

RCC FOUNDATIONS FOR OCTAGONAL POLES Providing RCC foundation of M25 grade (1 Cement:1 Stone aggregate: 2 Coarse sand) i/c excavation, steel reinforcement (Fe 500) @80 kg/cum of concrete contents, concrete cover 50mm, anchor bolts etc. over a bed of PCC 1:5:10 of required dimensions for octagonal poles of various heights as per following specifications complete in all respects and as per directions of Engineer-in-charge (HSR 24.8) 24.8.7 9m high pole

S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Metre below ground level including digging and refilling of earth including cost of suitable size socket/coupler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. HSR 24.5.2 24.5.2.3 DWC/HDPE pipe 63/50 mm outer dia/ inner dia

NS-1 Supply, installation, testing and commissioning of following LED street light 90 watt fixture IP-65/66 level protected including making connection and erection of same on exsiting pole/ bracket irespective of height pole/mounting height with cost of all labour and materials required to complete the job. Make- Havells/ Philips/Finolex

NS-2 Supply and erection of hot dip galvanized closed triple arm bracket (totally GI) with each arm of 50mm dia MS pipe 1.5 mtr long (3.5mm thick) duly welded with 450mm long 3mm thick of octagonal canopy of suitable dia (3mm thick) with angle of inclination 105 degree of verticle. The top and the canopy should be enclosed with MS sheet of 16 SWG. The bracket and canopy be supported with a brassing pipe GI 1400mm long , 25mm dia MS pipe (2mm thick) including the cost of cutting , welding all labour and material required to complete the job in all respect. (a) Double bracket

(b) Triple bracket

SETC of 16 sqmm 4 core PVC insulated Aluminium conductor armoured cable in existing HDPE/ PVC pipe / trenches including the cost of termination Aluminium thimble and petty materials etc. as required to complete the job.

Suraj Electrical Works

KANHA CONSTRUCTION COMPANY

Vijender Kumar Contractor

JS Power Solutions Private Limited