SPECIAL REPAIR TO ROOF/SUNKEN FLOOR TREATMENT WITH RENOVATION OF TOILET TO RECTIFY LEAKAGE / SEEPAGE INCLUDING ROOF TREATMENT OF ATTACHED COOK HOUSE IN BLDG NO P-3 OF ASC BN AND PROVN OF BOUNDARY WALL OF HEIGHT 2.1 MTR WITH BARBED WIRE IN FD WKSP COY

Amount

Demolition of cement concrete in ground floor and paving/as in sunken portion ( below or above ground level) all as specified

M&L for cement concrete type E - 2, 1:5:10 (using 40 mm graded brick aggregate) as in sunken flooring.

M&L for 15mm thick rendering in 1:3 CM with using 3% WPC as in sunken portion and finishing the surface even and smooth without using extra cement and applying evenly a tack coat of industrial bituminous 85/25 @ 1.20 Kg per Sqm in sunken floor including cleaning surfaces complete all as directed.

Dismantling of brick tiles single layer as in roof covering complete all as specified

Demolition of mud in roofs any thickness including plastering and leeping(whether full thickness removed or only a part thereof) all as specified.

Cleaning/Roughening surfaces of old concerete floor/roof by picking , sweeping clean and washing down with water to romove the dust etc complete all as spd.

M&L for PCC pedding with cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregate) to top surface of slab/sunken floor in slop 1:40 comlete all as specified.

M & L applying evenly a tack coat of industrial bitumen 85/25 @ 1.2 Kg per Sqm over applying primer bitumen coat @0.30 kg per sqm including cleaning surfaces on roof top.

M & L APP modified based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric weight not less than 150 grm per sqm complete all as spd and directed.

M & L 40mm th. Brick tiles laid on 15mm thick bedding layer of CM 1:6 and joints grouted flush in cement mortar 1:3 mixed with 5% of crude oil by weight of cement over APP membrane complete all as spd and directed.

Fixing only 40mm th. Brick tiles laid on 15mm thick bedding layer of CM 1:6 and joints grouted flush in cement mortar 1:3 mixed with 5% of crude oil by weight of cement over APP membrane complete all as spd and directed.

Taking down cement plaster of any description any thickness /dado/Skirting/ including raking out joints hacking for key scrubbing down with water all as specified.

M&L 15mm thick rendering on wall in CM 1:6 on brick/concrete surface and finishing the surface even and smooth with out using extra cement.

M&L 15mm thick rendering on wall in CM 1:4 on brick/concrete surface and finishing the surface even and smooth with out using extra cement.

M&L 10mm thick rendering in CM 1:3 on brick/concrete surface as in ceiling and finishing the surface even and smooth with out using extra cement.

M&L for 15 mm thick cement mortar 1:4 on brick or concrete surface finished even and smooth with neeru finish to plaster and applying evenly a tack coat of industrial bitumen 85/25 @ 1.2 Kg per Sqm over applying primer bitumen coat @0.30 kg per sqm including cleaning surfaces on verticle wall surface to reuduce seepage.cement all as specified.

Material and labour for preparation of new plastered surfaces on walls and applying two coats of oil distemper complete all as specified.

Material and labour for preparation of old painted surfaces on walls and applying one coats of oil distemper complete all as specified.

Material and labour for preparation of new plastered surfaces on walls and applying two coat of cement based paint complete all as specified.

Material and labour for preparation of old painted surfaces on walls and applying one coats of cement base paint complete all as specified.

M & L for applying white wash of 2 coats as in ceiling incl preparation newly plastered surfaces as specified and directed.

M & L for applying white wash of one coats as in ceiling incl preparation old painted surfaces as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding ( but not backing) and disposal of rubbish outside MD land complete all as specified

M&L non skid ceramic coloured tiles 7 to 8mm thick 1st quality (square/rectangular) area of each exc 0.06 sqm but n exc 0.11 sqm as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface and over and incl screed bed or bedding layer of mortar 15mm thick laying floor finished in CM 1:6 complete all as specified and directed

M&L coloured glazed ceramic tiles (300x200) x6mm thick on verticle surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over 10 mm thick cement plaster in CM 1:4.

Demolition of reinforced cement concrete in ground floors and pavings n. exc 15 cm thickness (below or above the ground level) all as specified.

M&L for reinfored cement concrete nominal mix type B0, 1:2.4 (12.5 mm graded aggregate )slab supported on wall, beams and columns in floors, roofs, landings, balconies, canopies, deck slab,chajjas and in shelves and the like

M&L for MS TMT bars 8 to 10 mm and over dia and cut to lenth, bent to shape required incl cranking bending spirally for hooping for clos hooking ends and binding with and incl MS wire (annealed) not less than 0.9 mm dia.

M&L for form work to soffits of suspended slabs such roof slabs, floor slabs, shelves, landings, chajja and similar work, not exceeding 200mm thick (horizontal or slopping) rough finished surfaces of concrete flat or shelfs etc.

Demolition Cement concrete (unreinforced)Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)

M&L for 50mm PCC 1:3:6 type C1 using 20mm graded aggregate as in plinth protection and path finishing the surfaces even and smooth without using extra cement all as specified

Demolition of brick work built in cement mortar incl all quions, arches pillars etc but excludding precast concrete articles all as specified.

M&L for brick work with sub class 'B' old size bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 all as specified.

Taking down chowkhats or frame with shutter w/o taking off shutter from the frame area not exc 1.5 Sqm each all as specified.

-ditto- but area exc 1.5 Sqm and not exc 4 Sqm each.

Taking down shutters of any description exc 1 sqm but not exc 2 sqm each

S&F pressed steel door frame with one or more rebate including necessary fixing lugs, hinges, lock stricking plate of size 105 x60mm

S&F 35 mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 2nd class hardwood glazed and skelton door shutters 35 mm thick divided into squares open rebated and prepared to receive glass, gauge etc edges of framing plain, chamfered, rounded tfitted with mltred beads for securing glass etc, size of members as specified in SSR Pt 1 section 8 clause 8.20 (b) supplied and fitted to chowkats with plain, chamfered or rounded mited and rebated bars any numbers.

S&F steel ventilator 1.25mm thick box type (primer coated) ERW hollow P section of size 60x25mmsingle rebated comprises gauged skelton shutter ERW sec 50x20mm and 1mm thick with two open able leaf consisting two Nos sash bars of T section 20x3mm completed welded to frame with one vertical mullion of ERW box type T section of size 60x25mm and 1.25mm thick incl cutting holes and making good dismantled portion PCC 1:2:4 type B1 four Nos for each window incl following fittings weld to frame shutter (a) hold fast, 150mm long of 12mmx3mm made to shape-04 Nos per window (b) handle of Z sction 20x25mm, 100mm long 01 Nos per leaf (c) MS Tower bolt 150mm long of 12x3mm made to shape-04 Nos per window (b) handle of Z section 20x25mm, 100 long stoper-01 No per leaf () MS pintal of hinges of size 75mmx12mm-02 Nos per leaf (g) fabrication & fixing arrangement as per Drg No. CEJZ/TD-06-07 , Note : wire mesh and painting shall be measured and paid separately under appropriate item.

S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and avg erage with aperature 1.18 mm fixed with tinned tacks, or galvanised wire staples.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.50 sqm in each pane complete all as specified.

Hacking out old broken glass (any thickness, size quality or description) from wooden frame including punching or drilling out old glazing pins/ spring clips and providing and fixing new ones.

M&L for preparation of new painted surfaces of steel and iron work of any description over 10 cm width or girth not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide on new surfaces.

M & L for applying one coat of synthetic enamelled paint including preparation of old decorated steel surfaces of any description not otherwise described over 10 CM girth or width all as directed by the Engr in charge

M & L for applying two coat of synthetic enamelled paint over one coat of pink primer including preparation of new wood surfaces of any description not otherwise described over 10 CM girth or width all as directed by the Engr in charge

M & L for applying one coat of synthetic enamelled paint including preparation of old treated wood surfaces of any description not otherwise described over 10 CM girth or width all as directed by the Engr in charge

S&F mild steel framed work such as guard bars/grills, grating etc with end of bars shouldered and/or riveted or forged into spikes and similar works including one shop coat of zinc chromate primer complete all as specified.

S&F factory made solid panel pvc door shutter 30mm thick (style) consisiting of frame made out of M.S. Tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixing in the frame at the site as per specification & drawing.

Solid PVC door frame of size 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube

S&F 250mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed

Supply & Fixing 100mm size butt hinges medium weight cold rolled mild steel all as specified.

Supply & Fixing 100mm size butt hinges extruded aluminum alloy with galvanised mild steel hinge plate

S&F Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed of size 150mm

S&F Mild steel pressed handles, oval type, stove enamelled black of size 150mm

M&L for PCC (1:2:4) type B-1(using 20 mm graded stone aggregate) as in cills, PCC blocks, coping, seismic and other similar bands, plinth bend, etc including weathering slightly rounded or chamfered angles and throuting , including necessary form work etc all as specified.

M&L for PCC Type B0-1:2:4 using 12.5mm graded aggregate as in pressed steel frame, hold fasts and similars articles

Taking up or down 15 mm GI tubing and connections, including cleaning for refixing or removal to store

Taking up or down 20 mm GI tubing and connections, including cleaning for refixing or removal to store

Refixing 15mm old GI tubing and connections in new or old position (Walls, ceiling, floors, etc.)

Refixing 20 mm old GI tubing and connections in new or old position (Walls, ceiling, floors, etc.)

S & F G I Tube 'med grade' galavanised, with all fitting and fixed complete to walls and ceiling etc 15 mm bore.

S & F G I Tube 'med grade' galavanised, with all fitting and fixed complete to walls and ceiling etc 20 mm bore.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth

S&F in repair 15mm stop valves/Angle cock , chromium plated, screwed down, high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions and fixed in Repair.

Fixing only in repair 15mm stop valves/Angle cock , chromium plated, screwed down, high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions and fixed in Repair.

S&Fin repair 15mm dia Bib taps cast copper alloywith fancy type chromium lated crutch or butterfly handle screwed down, scewed for iron pipes or for brass ferrule

Fixing only in repair Bib tap cast copper alloy suitable for 15mm bore iron pipe complete fixed in repairs .

S&F squatting pan WC orrisa pattern size 580 x 440 mm white with integral foor rest with P or S trap incl provn of lime concrete bedding incl breaking up existing damaged WC seat and connecting flush pipe etc and make good to floor complete all as specifed.

S&F 10 Litre PVC valveless syphonic action flushing cistern low level white with inlet ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC 32 mm dis for low level cistern in repairs

Vitreous China urinals, hallf stall urinals (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)

PVC connection fiber, reinforced 45cm long with brass check nut and PVC washers at both ends complete

S&F in repair 15mm dia fancy type pillar taps cast copper alloy with capstan heads chromium plated scewed down high pressure with long scrwed shanks and fly nuts screwed for iron pipes

Fixing only Pillar tap 15mm cast copper alloy with capstan heads chromium plated screwed down high pressure with or with out lettered hot or cold with long screw shanks and fly nuts screwed fixed to wash hand basin complete all as specified

S&F for Vitreous china wash hand basin, white flat, size 550 x400 mm incl brackets with PTMT waste coupling and waste pipe all as specified and directed by Engineer - in - Charge.

S&F 500 ltr rotational moulded polythylene water storage tank (Cylindrical vertical with closed top) hosted and fixed in position incl dismantling of existing tank of any description complete all as specified.ISI marked Make SINTEX

Fixing only 500 ltr rotational moulded polythylene water storage tank (Cylindrical vertical with closed top) hosted and fixed in position incl dismantling of existing tank of any description complete all as specified.

S&F20mm for ball valve brass high pressure, with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed

S&F 20mm Gun metal globe or gate valves, with iron wheel head screwed both ends for iron pipe and fixed.

Fixing only 20mm Gun metal globe or gate valves, with iron wheel head screwed both ends for iron pipe and fixed.

S&F in repair brass chromium plated shower rose of 125mm size, with or without swivel joints including fixing to steel pipe or union.

S&F Brass chhromium plated tubular towel rail 20mm dia , D type, 60cm long between flanges

S&F Brackets for brass chromium plated tubular towel rail 20mm dia.

Fixing only Brass chhromium plated tubular towel rail 20mm dia , D type, 60cm long between flanges incl brackets.

Fixing only Brackets for brass chromium plated tubular towel rail 20mm dia.

Dismantling of 100mm dia cast iron or reinforced concrete drain pipes, jointed in cement motar and taking out of trenches , if required.

Dismantling of 75mm dia cast iron or reinforced concrete drain pipes, jointed in cement motar and taking out of trenches , if required.

S&F 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls

S&F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints,fixed to walls with MS brackets complete

M&L 75mm PVC (SWR) floor trap , plain with grating including jointing with solvent cement complete and fixed with wall with MS bracket all as spd and directed

S&F110mm PVC (SWR) bends

S&F 75 mm PVC (SWR) bends

S&F PVC (SWR) double Y 110mm bore

S&F PVC (SWR) T 75 mm bore

PVC 110mm (SWR) vent cowal

M & L PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent.

S&F stack clamps out of 50mmx5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof.

M & L spout pipe 32mm dia GI pipe beveled cut at both ends by making hole in walls sunken portion aprox above the RCC slab and ceiling finished the hole with cement plaster 1:2 to match with existing surface complete etc.

Dismantling of plain steel sheet, any gauge, thickness, including nainital or similar pattern roof covering.

S&F 0.63mm Plain galvanished mild steel sheet as in crumple joint fixed with MS screwes with rawal plug @ of 150 C/C on both sides.

Site clearance in Soft/loose soil including cutting of shurbes, roots , hedges etc of girth n exc 30 cm complete all as specified and directed.

Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc., and getting out in soft/ loose soil.

Material and labour for cement concrete 1:5:10 type E -2 using 40mm graded crushed stone aggregate as in fdn filling and mass concrete complete all as specified and as directed by Engineer-in-Charge.

M&L for Brick work using subckass 'B' bricks, straight or curved on plan exc 6m mean radius built in cm 1:6 complete all as specified and as directed.

M&L for cement concrete 1:2:4 type B-1 in plinth courses, coping , DPC and similar articles complete all as specified.

Returning, filling in , including spreading, levelling , watering and well ramming in layers not exc 25 cm thick by using hard/dense soil as in low line area as directed by Engr-In-Charge .

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point.

Material and labour for cement concrete 1:3:6 type C -2 using 40mm graded crushed stone aggregate as in fdn filling and mass concrete complete all as specified and as directed by Engineer-in-Charge.

S & F MS steel work in posts and struts in fencing including cutting tops to shape as directed notching for wire etc flats iron fillets (for securing wire mesh etc ) similar wk conforming to FE 410-0

S&F galvanised, 2 strand, steel barbed wire 2.24mm dia barbed wire with 2mm dia barbs at 75mm spacings and straining and fixing to any type of std rails securing or tying at crossings with and provn of galvanised mild steel wire, staples or steel pins, etc. as directed.

Preparing new steel iron surfaces of any description, over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

HYLAND CONSTRUCTION COMPANY

SANDEEP JHANJI CONSTRUCTIONS

PAUL CONSTRUCTION CO.

KULDEEP SINGH

NATIONAL BUILDERS

JAGDISH KUMAR SEHGAL

M/s Nirmal Singh and Co.

Barmotra Infrastructures