Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.7 LAccepted-AOC AT POST ARANGAON MEHERABAD TAL DIST AHMEDNAGAR PIN 414006 | AHMEDNAGAR | AHMEDNAGAR | MAHARASHTRA | 414006 | L1 | Accepted-AOC ACCEPTED DUE TO LOWEST | |
| 2 | L2₹34.6 L+₹4.7 L (15.7%)Rejected-AOC | L2 | Rejected-AOC REJECTED DUE TO NOT LOWEST | |
| 3 | L3₹44.3 L+₹14.4 L (48.1%)Rejected-AOC NO 98 1 1C YOJANANAGAR LOHEGAON WAGOLI ROAD NEAR SIVBHA DARBAR HOTEL LOHEGAON PUNE 411047 | PUNE | PUNE | MAHARASHTRA | 411047 | L3 | Rejected-AOC REJECTED DUE TO NOT LOWEST |
Tender Value
₹37.0 L
EMD Value
₹74,000
Closing Date
16 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) LOHEGAON
GE (AF) LOHEGAON, PUNE -411032
PROVISION OF SHED AT GATES, WIDENING OF DRAIN IN FRONT OF JTF HANGAR, UPGRADATION OF TOILET IN BUILDING NO. P-134 AND CERTAIN MINOR WORKS UNDER GE (AF) LOHEGAON AT AIR FORCE STATION PUNE
2022_MES_559562_1
8626/E8
Open Tender
Civil Works
Item Rate
180 days
GE (AF) LOHEGAON
As per NIT
8 documents required · 8 mandatory
₹500
Yes
GE (AF) LOHEGAON
₹74,000
Yes
16 Jan 2023
22 Oct 2022
23 Nov 2022
22 Oct 2022
16 Nov 2022
4 Nov 2022
Amount
Demolition of Cement/Biituminous concrete in ground floor and pavings n'exc 15cm thickness (below or above ground level complete all as specified and directed.
Excavation in trenches in hard /dence soil not exceeding 1.5 m wide and not exceeding 1.5 m depth complete all as specified and directed.
Surface excavation n.exc (not exceeding) 30cm deep and averaging 15cm deep and getting out in hard/ dense soil complete all as specified and directed.
Excavating in post holes (or similar holes) each n exc 0.5 cu.m, getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface of hard / dense soil complete all as specified and directed.
M&L for PCC type D-2(1:4:8) using 40mm graded crushed aggregate as mass conc and filling of foundation complete all as specified and directed.
M&L pre-cast cement concrete(20mm graded crushed stone aggregate) 1:3:6 type C-1 as in block masonery exc 10cm in width with solid block masonery with solid blocks,exc.10cm in width and setting in cement mortar 1:4 complete all as specified and directed.
-Ditto- all as per Item No 6.00 above ,but except block complete all as specified and directed.
M&L form work to fair finished surface to sides of concret foundations, footings, bases of columns, raft and raft beams, sides and sofits (if any) of foundations and plinth beams and similar works: verticals or to batter complete all as specified and directed.
M&L for Mild steel TMT bars10mm dia and over, cut length, bent to shape required , including cranking , bending spirally for hooping for coloumns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to complete all as specified and directed.
-Ditto- all as per Ser item No 9.00 above but 6 to 8mm dia as in stirups complete all as specified and directed.
M&L RCC type M-25 (20 mm grade aggregate ) in foundations, inclucing rafts, footings, foundations beams : plinth beams: bases for column, etc,basement slabs , under reamed piles ad mass concrete complete all as specified and directed.
M&L for PCC type B0 (1:2:4) using 12.5 mm graded crushed aggregate in coping , bands,damp proof courses,mass concrete etc complete all as specified and directed.
M&L for 10mm thick rendering on fair faces of brick works finished even and fair without using extra cement in cement mortar 1: 4 complete all as specified and directed.
Supply only Liquid water proofing comopund complete all as specified and directed.
Removing excavated material to a distance exc 250 Mtr but n exc 500 Mtr and depositing where directed complete all as specified and directed.
M&L for preperation of new plastered surface of wall , Stone, Concrete roof and Asbestos cement of any description and applying two coat of Camouflage pattern weather proof exterior emulsion paint over a coat of primer complete all as specified and directed.
M & L for 75 mm PCC 1:3:6 type C-1 using 20mm graded aggregate as plinth protection finished even and smooth with out using extra cement complete all as specified and directed.
M&L Forming Contraction (Dummy) joints 75 mm deep x 10mm wide for plinth protection & similar work , filled with sealing compound Grade 'B' in plinth protection complete all as specified and directed.
M&L for Cement concrete type D-2,1:4:8 (40mm graded aggreate) 75 mm thick as in sub -floors ,sub- bases ,floors and pavings,etc complete all as specified and directed.
M&L PCC 1:2:4, 25 mm thick type B0 using 12.5mm graded stone aggregate as in floor finished even and fair with out using extra cement complete all as specified and directed.
M&L for Chequred cement concrete tiles 30cm X 30cm X 20mm thick, set ,pointed & jointed in neat cement slurry in floors polished with white cement & no pigments laid over 20mm thick cement screed base (1:6) complete all as specified and directed.
M&L for Cement concrete type B-2,1:4:8 (40mm graded aggreate) 100 mm thick as in sub -floors ,sub- bases ,floors and pavings,etc. complete all as specified and directed.
M&L sand filling (30 mm average thickness) under floors in foundations and for laying Interlocking paver blocks including watering and consolidation complete all as specified and directed.
M&L Glossy finish machine pressed precast concrete interlocking paver block any shape and size polished with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickiness M-35 grade complete all as specified and directed.
M&L dressed granite or trap /Precast cement concrete type C0 (1:3:6) (12.5 mm nominal size of graded course aggregate) Kerb stones roughly squared/rectangular pieces of minimum thickness 15cm and height 30 cm ,so that the maximum depression from a straight edge held against the dressed surface shall noot exceed 6mm for top and exposed surfaces of sides and 15mm for the rest of surfaces jointed in cement mortar 1:6 and struck finish ( rate included for removal of old damaged curb stones of any description) complete all as specified and directed.
Demolition of stone slabs of any description or thickness in floors aprons etc.laid bedded and pointed in any mortar complete all as specified and directed.
M&L for rendering screed bed with CM (1:4) 15mm thick for laying wall tiles complete all as specified and directed.
M&L for Granite (of any type ) tiles 20mm thick machine cut,in skirting/ dado bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.
S & F Rolled mild steel in Compound girders and stanchions, lattic girders,posts, staging for water tanks and the like including caps, bases,splices etx. Builtup from two or more beem or channel sections or angles with plates, including all lattice bars, stifeners,gusset plates,etc. conforming to FE-410 - W(grade E-250) quality 'A' complete all as specified and directed.
S & F Plates (Plain or Corrugated) channeis,square cut or notched (ordinary or counter sunk) forming holes with out any attachment conforming to FE-410 - W(grade E-250) quality 'A' complete all as specified and directed.
S & F rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates conforming to FE-410 - W(grade E-250) quality 'A' complete all as specified and directed.
M&L steel screw bolts of length exc 15cm but n exc 30cm and diameter of neck 15 to 30mm (machine made) with hexagonal or square heads,at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 35cm long complete all as specified and directed.
S&F 0.63mm thick Galvanised corrugated mild steel sheeting with two corrugations side lap,fixed with coach screws and washers in roofs walls etc. with grade of zine coating 275 complete all as specified and directed.
S&F 0.80mm thick plain galvanised mild steel sheeting as in ridges hips, valley gutters drip and straight flashings (length and girth as fixed) with L or J hooks or coach screws with grade of zinc coating 275 complete all as specified and as directed.
M&L Hand rails, grills ,Gates ,half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors,balusters,nosing to steps including embeding in concrete and screwing etc. wind ties for roof ,Brackets for Valley gutters ,including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or FE 310-0 complete all as specified and directed.
M&L GI frame work for seamless ceiling & wall lining/ comprising of GI perimetre channel 0.55mm thick with two unequal flanges of 20 and 30mm and webof 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre /intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fastners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having Kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre in ceiling anr wall cladding complete all as specified and directed.
M&L Solid PVC wall lining connsisting of 5mm thick plain colour PVC sheet/ ALCO panells of any colour inclusive of solvent cement and fixing at site on GI frame as per specification and drawing complete all as specified and directed.
M & L for preparation of new steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete all as specified and directed.
M&L applying two coats of Camouflage pattern synthetic enamel painting to new surfaces steel/ CGI sheet surface exc. 10 cm width/girth over a coat of mordant solution including preparation of surfaces by removal of galvanisation if reqd, washing and cleaning,including filling with filler where reqd complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sq m but not exceeding 0.18 sqm in floors {Superior/Premium quality}, set and jointed in neat cement slurry and pointed in colour cement to match the shade of tile over and including 15 mm thick screed bed in CM (1: 6) complete all specified and directed.
M&L Glazed Ceramic Coloured Tiles, 300X200X7mm in size, set on Vertical Surfaces such as Skirting, Dado, etc,over and including 10mm thick rendering in cement mortar 1:3 Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the shade of the Tiles, complete all as specified and directed.
Demolition of stone / block masonry built in CM complete all as specified and directed.
Taking down cement plaster on brick or stone wall or ceiling including raking out joints hacking for key scrubbing down with the water etc, complete all as specified and directed.
M&L for 10mm thick rendering in CM (1:6) on internal surfaces of brick work or concrete surfaces finished even and smooth without using extra cement, complete all as specified and directed.
M&L for preparation of newly plastered wall surfaces and applying two coats of Oil bound distemper over a coat of alkali resistantance primer complete all as specified and directed.
S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck in side with solvent cement for stiles and plain colour PVC sheet for top rail & bottom rail on either side & as gap insert for top rail & bottom rail paneling of both side prelam PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, jointed together with solvent cement, supplying and fixing in the frame at site as per specification and drawing complete all as specified and directed.
Supply and fix for solid PVC door frame of size 50mm x 47mm, made out of 5 mm thick plain colour PVC sheet, reinforced with mild steel square tube complete all as specified and directed.
S & F in Aluminum anodized or powder coated tower bolts 100mm length complete all as specified and directed.
S/F in aluminium handles cast type anodized 125mm size complete all as specified and directed.
S & F 75 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.
S&F vitreous china wash basin, white, flat back size 450x300mm, incl cutting for and pinning in ends of brackets or erecting stand but excl taps, pvc conections but incl brackets in repairs complete all as specified and directed.
M & L for 52mm thick PVC Partition for making of toilet cubicles including fittings ,consisting of 12mm thick plain solid PVC ply sheet reinforced with frame work made from 40mm x 20mm MS tubes. In between two MS tubes, 5mm thick Plain heat moulded 'C channel of size 75mmx50mm with feathered edges shall be fixed on the floor, wall and ceiling. Plastic ply opanel shall be inserted in the PVC 'C channel. The first & last MS tube should be errected such that it is inside a PVC 'C channel, in between adjoining plastic panel, 5mm thick x75mm width plain PVC sheet feathered at edges shall be stick on the front & back face using solvent cement complete all as specified and directed.
S&F wash down water closet (pedestal pattern) suitable for children complete white with plastic water closet seat white closed pattern with flat bottom anc cover and mild steel chromium plated or aluminised hinging device and flush pipe of polythelene of low or density or PVC 32mm dia for low level flushing cistern complete all as specified and directed.
S&F 10 Itrs PVC (White) valve less syphonic action type, flushing cistern low level with inlet ball valve float, handle. aluminium brackets and 32mm PVC flush pipe for bottom support fixing with gutties embeded in wall with drilling machine etc complete all as specified and directed.
S & F Grating doom 100mm dia of PTMT complete all as specified and directed.
S&F high density 50mm bore polythylene pipes (HDPE) of pressure rating 6 kg/cm2 fixed complete to wall or in floors with necessary socket, elbwo & bend etc complete fixed to wall or in floors etc complete all as specified and directed.
S&F Brass chromium plated tubular towel rail 20mm dia "D" type 60 cm long between flange fixed in repair complete all as specified and directed.
S&F waste pipe of polyethylene of low or high density or PVC ,32 mm/40mm dia for urinal/wash basin/ flush tankfixed in repairscomplete all as specified and directed.
S&F PVC gully trap 110/125 mm dia with grating including jointing to fixed in cement concrete 1:2:4 type B1 complete all as specified and directed.
M&L for 75mm bore PVC (SWR) floor trap plain with grating including jointing with solvent cement ccomplete all as specified and directed.
S&F PVC connections 15mm size with PTMT nut of length 600 mm complete all as specified and directed.
S&F in repairs GI tubing tubes "medium grade" galvanized with all fittings and fixed complete to walls / concealed and ceiling or laid in floors in any position or location including taking down etc complete all as specified and directed.
(a) 15mm bore
(b) 20mm bore
Supply and fixing of CP angular stop cock fancy type 15mm dia single way and fixed complete all as specified and directed.
Supply and fix in repair Bib taps cast copper alloy chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule 15mm bore, complete all as specified and directed.
S&F 15mm dia brass chromium plated fancy type, pillar tap with fly nuts capstan head screwed down high pressure with or Without lettered hot or cold with long scewed shank complete all as specified and directed.
Supply and fixing of Health faucet including 1.00m flexible pipe with brass nuts for EWC, as approved complete all as specified and directed.
S&F in repairs PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall (110 mm bore) complete all as specified and directed.
-ditto- all as per Ser item No 68.00 but 75 mm dia complete all as specified and directed.
M&L for granite (of any colour) 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including grinding and polishing as in kitchen platform, counter for wash basin, flooring and all other similar works complete all as specified and directed.
M&L PCC 1:2:4 type B1 using 20mm graded stone aggregate as in coping, benching/hunching including necessary form works complete all as specified and directed.
M&L for preperation of new plastered wall surface of any description and applayng two coats of cement based paint complete all as specified and directed.
M&L for PCC type C2 (1:3:6) using 20mm graded crushed aggregate in surface channel and drains complete all as specified and directed.
Extra for forming fair finished drain or channel 155mm inner girth in cement concrete, using extra cement, including forms, mounds, mitred/stopped end etc. complete all as specified and directed.
Extra for forming fair finished drain or channel 80mm inner girth in cement concrete, using extra cement, including forms, mounds, mitred/stopped end etc. complete all as specified and directed.
M&L for form work to rough finished flat surfaces to soffits of suspended flat slabs such as roof slabs ,floor slabs,landings and similar works (smooth finished flat surface of cncrete) not exceding 200mm thick (Horrizontal or sloping) complete all as specified and directed.
M&L form work to edges of rough finished concreat flat surfaces to , treads breaks in floors, window cills, concrete failings, openings in concrete wallsm floor and roofs n.exe 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20 cm wide complete all as specified and directed.
M&L RCC type M-25 (20 mm grade aggregate ) in Slabs supported on walls ,beams and columns in floors, roofs,landings, balconies, canopies,deck slabs and in shelves and the like complete all as specified and directed.
M&L framed work such as grills, gratings, gates,etc with ends of bars shouldered and /or riveted ,or forged into spikes; framed balusters;walk ways;railings;frame work of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.
M&L applying two coats of synthetic enamel painting to new surfaces steelof any description over a coat of red oxide primer exc. 10 cm width/girth including preparation of surfaces, removal of galvanisation if reqd , including filling with filler where reqd complete all as specified and directed.
Removing excavated material n, exe 50m and depositing where directedat a level n, exe 1.5 m above the starting poit complete all as spfd in soils complete all as specified and directed.
Returning, Filling in, including spreading levelling ,watering and well ramming in layers nexc 25cm thick complete all as spfd in Hard/loose soil complete all as specified and directed.
Demolition of reinforced cement concrete of any description and in any position not otherwise specificallly provided for.
Demolition of Brick/precast concrete block/Stone/boulder masonary walling built in cement mortar including all quoins, arches , pillars etc complete all as specified and directed.
M&L Framed work such as grills,Barred iron doors,Ladders, walk ways,frame work of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.
M&L for Forming mortice holes exc 50 but n exc 100 Cu cm for , fixing bolts ,balusters,newels,rag-bolts,etc and grouting with cement mortar 1:2 complete all as specified and directed.
Excavating in post holes (or similar holes) each n exc. 0.50cum getting out, returning, filling and well raming earth or broken rubble mixed with earth around etc in soft soil.
M& L PCC 1:2:4 type B-2 (40 mm graded aggregate) as in foundation filling and mass concrete complete all as specified and directed.
S&F pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.
Material and labour for providing point wiring with two runs of 1.5 Sqmm multi stranded copper conductor Flame retardant PVC insulated single core 1100 volts grade & with one run of 1.5 Sqmm single core multi stranded copper conductor Flame retardant PVC insulated 1100 Volts grade wire for continuous earthing complete in and including PVC casing and caping with all fittings/fixture etc and open recessed type Plastic Enclosure( Plastic Switch Board ) ISI Marked (IS:14772) for housing switches / sockets complete all as specified and directed.
(a) One light point controlled by one switch .
(b) One Fan point controlled by one regulator/switch.
(c) One 3 pin socket 5 A on independent board.
(d) One 3 pin socket 5 A on the same switch board.
Material and labour for providing point wiring with two runs of 2.5 Sqmm multi stranded copper conductor Flame retardant PVC insulated single core 1100 volts grade & with one run of 2.5 Sqmm single core copper stranded Flame retardant PVC insulated 1100 volts grade wire for continuous earthing complete in and including PVC casing and caping with all fittings / fixture etc and open recessed type Plastic Enclosure (Plastic Switch Board) ISI marked (IS 14782) for housing one 15 A Switch / sockets complete all as specified and directed.
M&L for sub main wiring complete with two runs of single core 6 sq mm FRLS PVC insulated unsheathed multi stranded copper conductor 1100 V grade with colour code and one run of 6 sqmm single Flame retardan PVC insulated unshedthed multi stranded copper conducator green colour cable for continuous earthing complete in & including PVC casing & caping with all fitting & fixtures complete all as specified and directed. ( Note Two runs of 6 sqmm copper cable and one run of 6 sqm copper cable including PVC casing & caping shall be measured and paid as one length).
Supply and fix switch piano flush type 5 Amp one way complete all as specified and directed.
Supply and fix switch Socket combination outlet 2 in 1 3 pin 5 amps flush type complete all as specified and directed.
Supply and fix socket outlet 2 in 1, 3 pin ,5 A flush type complete all as specified and directed.
Supply & Fix switch Socket combination 3 pin 16 Amps flush type complete all as specified and directed.
Supply and fix ceiling rose surface type bakelite / PVC three terminal 65 x 50mm complete all as specified and directed.
Supply and fixing LED light fitting 22 W, 220V, AC decorative box type with dirver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
Supply & Fix in replacement Highbay LED Energy saving 80 W, environment friendly & robust High bay/Mediumbay LED IP 65 luminaire with high efficacy suitable for ceiling (Surface/Suspended) complete all as specified and directed
Supply & Fix (in replacement) energy saving and environmental frindly long life exclusive innovative flood light luminaries 120 w 230 AC Outdoor type with thermal management in mutiple optices and equipped with IP 66 protection, with impact and corrosion resistant with EDs as light source and lens embedded PC cover/Toghened glass and impact resistance of IK 07 and elecatronic driver fixed on high mast pole or any any other pace as required on site incl making all necessary arrangement for fixing complete with MS flat iron clamps (Clamp shall be 40x5 mm MS flat), nuts and bolts and washers complete all as specified and directed.
S&F post top LED light fitting made in die cast aluminium with glare free indirect lighting uniform distribution and IP65 protection 35 Watt with fixing arrengement like. suitable size GI pipe, flanged stand fixed in PCC with nut bolt fastner etc. complete all as specified and directed.
S&F wall mounted fan 400 mm sweep with complete wiring and other fixing accessories as per requirement on site complete all as specified and directed.
S&F MCB DB SPN 08 way IP43 IK-09 with metal door suitable for housing of MCBs complete all as specified and directed.
S&F MCB SP 240 Volts, 10 KA C Curve MCB Sp 6 to 32 Amps, complete all as specified and directed.
S&F MCB DP 40 to 63 Amps 10 KA 240 Volt C Curve and electric connections with copper thimbles complete all as specified and directed.
Supply, laying, jointing, testing and commissioning of LT under ground cable 1100 volts grade XLPE (cross linked polythene ) armoured with galvanised round steel wire or steel strip , electric power cable heavy duty, with multi stranded aluminium conductor, laid in trenches, ducts fix on walls/poles with proper size saddles and clamp laid under roads/path/ drain /culverts or enclosed in GI pipe/ fix complete all as specified , for following size:- complete all as specified and directed.
(a) 10 Sqm 2 core
M/L for providing earthing complete with galvanised steel earth plate electrode 600 mm x 600 mm x 6mm thick buried directly in ground earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 Mtr below normal ground level connected to galvanised earth lead wire 4.00mm dia by means of bolts, nuts, checknuts & washers of GI or steel and connecting to earth dolly all as shown in electrical plate No. 3 of SSR Part I of 1991 & testing complete including 15mm dia light grade GI pipe upto 7.5mtr long, excavation in any type of strata, PCC ( 1:3:6 ) type C1 earthing chamber, pre cast slab 50 mm thick in cement concrete ( 1: 2 : 4 ) type B 1 ( reinforced with welded steel wire fabric (XPM) weight not less than 4 Kg / Sqm with frame, test box , funnel, wire mesh with GI watering pipe etc. complete all as specified and directed.
santulan & Company
S.R.M.K Enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .