PROVN OF LT ELECTRIC SUPPLY CABLE AND OTHER CONNECTED ELECTRIC WORKS IN JCOs/OR COLONIES OF LUCKNOW CANTTUNDER GE (E/M) LUCKNOW

Amount

Supplying laying or fixing, jointing and testing LT under ground electric power cable crossed linked polyethylene (XLPE) insulated, galvanised steel strip armoured, ISI-7098 Marked, with aluminium conductor multi stranded, heavy duty 1100 Volts grade of size 10 sqmm cross sectional area, 4 core laid in trenches/ laid under floor or fixed naked with walls/ on poles/ in ducts /in GI pipes etc. with and including MS clamps, nuts, bolts & washers complete all as specified and directed. Note :- Excavation, earth work, sand cushioning, protection bricks/ tiles/ block and pipe shall be measured and paid separately under respective items.

All as Sl item Srl No-1 above but size 16 sq mm 4 core

All as Sl item Srl No-1 above but size 25 sq mm 4 core

All as Sl item Srl No-1 above but size 50 sq mm 3.5 core

All as Sl item Srl No-1 above but size 95 sq mm 3.5 core

All as Sl item Srl No-1 above but size 120 sq mm 3.5 core

All as Sl item Srl No-1 above but size 240 sq mm 3.5 core

Supplying, laying, jointing, testing and commissioning HT under ground electric power cable Crossed linked polyethylene ( XLPE) insulated, screened PVC bedded, galvanised steel strip or wire armoured electric power cable (heavy duty) with aluminium conductor, 11000 Volts grade suitable for earth system of 3 core 95 Sq mm cross sectional area size, ISI marked as per IS 7098 Part-2, laid in trenches/ laid under floor/ laid in ducts or fixed on poles etc. complete all as specified and directed. Note :- Excavation/ boring under raod/ pipe shall be measured and paid separately under respective items.

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth for laying of cables, pipes etc. and getting out including trimming the sides and forming bottom surfaces to required levels in soft/loose soil complete all as specified & directed.

Returning, filling in, including spreading, levelling watering and well ramming in layer not exceeding 25 cm thick in soft/loose soil complete all as specified & directed.

Removing excavated material ( soils) not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified & directed.

Material and labour for river sand, washed and screened dry for cushioning to under ground cable in trenches below and around under ground cable including spreading and levelling complete all as specified & directed.

Supplying & Laying un-reinforced precast concrete cable protection covers of class HV, type-1, flat, of size 300mm x 180mm x 40mm perpendicular to the axis of the cable, for protection of cable all as specified and directed.

M&L laying well burnt old size bricks, sub class "B" bricks, straight or curved on plan , laid flat with width equal to length of brick , laid dry over electric cable for protection complete all as specified & directed.

Boring/Drilling (horizontally) manually under existing road (maximum 10 M in width) suitable for passing GI tubing of 40 to 100 mm bore complete all as specified & directed.

Supply & Fixing Mild steel galvanized tubes light grade ISI marked 40 mm bore laid in trenches / road crossing/ fixed to pole /walls/path/drain/floor etc all as specified and directed.

All as item Srl No-16 above but 50 mm bore.

All as item Srl No-16 above but 80 mm bore.

Material & labour for boring of holes under road, pavement, hard standing by trenchless technology for laying/passing of HT/LT cables using ultra sounding technique and necessary machine under roads/hard standing complete all as specifed and directed. Note:- If any damages to existing services such as OFC cable/ Gas pipe line/ Electric cable etc shall be repaired immediately by the contractor. Rate quoted under this item shall be deemed to be included for the same.

M & L for 150 mm thick plain cement concrete 1:2:4 type B-2 (using 40 mm graded stone aggregate) complete all as specified & directed.

M & L Plain cement concrete 1:3:6 type D-2 using 40 mm graded stone aggregates, as copping of poles complete all as specified and as directed.

Disconnecting the existing cable from Panel / Pole, preparing the end for jointing including all earth work, Supply and fixing Cable end termination including sleeves heat shrinkable joint suitable for LT XLPE cable of size 3.5 core 16 to 50 sq mm complete all as specified and as directed.

All as item No 22 above but size 70 to 120 sq mm

All as item No 22 above but size 120 to 240 sq mm

Disconnecting the existing cable from Panel / Pole, preparing the end for jointing including all earth work, Supply and fixing straight through heat shrinkable joint suitable for LT XLPE cable of size 3.5 core 16 to 50 sq mm complete all as specified & directed.

All as item No 25 above but size 70 to 120 sq mm

All as item No 25 above but size 120 to 240 sq mm

Supply and fix cable jointing kit for 11 KV grade cable for outdoor termination cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE, armoured, Al conductor cable of size 95 sqmm complete all as specified & directed.

Supply and fix cable jointing kit for 11 KV grade cable for indoor termination cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE, armoured, Al conductor cable of size 95 sqmm complete all as specified & directed.

Supply and fix cable jointing kit for 11 KV grade cable for indoor termination cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE, armoured, Al conductor cable of size 120 sqmm complete all as specified & directed.

Supply and fixing Cable root indicator made out of PCC block and properly painted as per approved colour in 1:3:6 type C-1 using 20 mm graded stone aggregated of size 900 mm x 300 mm x 100 mm thick ( 45 cm burried in ground) with DANGER / 1.1 KV CABLE MES embossed on rout marker including excavation and earth work complete all as specified and directed.

Supply, installation, testing and commissioning of 12 KV, 630 Amps, both side extensible outdoor Fixed Type (IP54), floor mounted RMU (Ring main unit) 6-way comprising of 630 Amps,50 HZ, Motorised Vaccum Circuit Breaker comprising one No as Incomer & five Nos Vacuum Circuit Breaker as Outgoing, fitted inside robotically / manually welded stainless steel (Non Ferrite Non Magnetic Grade) tank having minimum thickness 3+0.5 mm (as per IEC) having IP 67 Degree of Protection. RMU should be provided with copper bus bars internal, external as well as earthing bus bars, Resin cast ring core protection CT on cables 100-50/1 Amp, 2.5 V 5P10 A, set of 3 each & Resin cast ring core metering CT 100-50/1 Amp, Cl 1.0, 2.5 VA , set of 3 each VCB on cables, one number fault passage indicator per unit, padlock provisions & complete with all accessories. The RMU shall be type tested for Internal arc test of 21kA/1 sec as per IEC 62271-200. The unit shall include the following with all necessary standard fitting and PCC work as per OEM specifiacation as required at site:-

01 No Incoming & 05 Nos outgoing 630 Amp motorised SF6 vaccum circuit breaker triple pole, single break 3 position as incomer (On, Off and earth having STC capacity 21 KA for 3 seconds with copper bus bar and copper earth bar fitted with fixed type voltage indicator device as per IEC 61958-1, fully rated with earth switch, spring assisted mechanism, Red/Green Push Button for On/Off Operation, Arc proof hinged type cable cover interlocked with Earth Switch, Air insulated cable boxes and boots suitable for bottom entry front termination of 3 core cable 120 to 185 Sqmm. 3 O/C + 1E/F self powered relay with Low and High set for Over current and Earth Fault. Relay should have LCD ( 16 x 2). Last 5 Fault Record with Time stamp, battery pack replaceable from front.

RMU should be provided with protection scheme with for each VCB for Bus Connected PT Unit -1 No. for Metering consisting of following:- (a) Type M: Air Insulated metering module 12KV, 630A, 20KA for 3sec. (b) Voltage Transformers of the ratio 11kV/√3 / 110 V/√3, 25 VA, Class 1.0 with HT fuses on primary side and MCB on secondary side. (c ) Digital MFM to measure Amps, Volts, Frequency, PF, KWH, KVAR. (d) LED Illumination. (e) Elstein HFS panel heater 300 watt with thermostat suitble for VCB panel. (f) RYB phase indications. NOTE: (i) Contractor shall arrange for factory visit of rep of accepting officer to carry out Routine & type test (Non destructive) (ii) The materials will be purchased only through manufacturing company. (iii) Mechanical operation counter for VCB. (iv) Any other parts/items not specified above but technically required for smooth functioning of RMU shall be deemed to be inclued in the quoted rates.

All as per item No 32 above but HT 11 KV,630 amps Extensible outdoor (IP54) RMU (Ring Main Unit) 3 ways compriseing of 01 No. 630 Amps (comprising One Nos Incomers) 02 Nos 630 Amps Vaccum circuit Breaker as outgoing, inside robotically/manually welded as per IEC-62271 ALL AS SPECIFIED AND DIRECTED

Supply, installation, testing and commissioning out door type cubical panel board outer shell made out of 3.15 mm thick MS sheet and inner shell made out of 2 mm thick MS sheet and MS angle section 50x50x6 mm on PCC 1:2:4 type B-1 platform 40 cm above the ground level and 45 cm below the ground level, frame factory fabricated with front and back openable double door system lockable/openable by Keys having chromium plated 19 mm dia fancy lock, louvers and air vent gasket for natural flow of air “U” type gasket shall be used to make the outer shell completely vermin proof .suitable for 3 phase 4 wire 415 Volt, 50 Hz, tested at CPRI for 35 MVA rupturing capacity at 415 Volts factory fabricated having modern fabrication and testing process which includes seven tank pretreatment process comprising of degreasing, rinsing, de-rusting, rinsing, phosphatising, rinsing and passivation followed by powder coat painting having thickness not less than 100 microns provided with suitable gasket to make it dust/vermin proof and general construction confirming to IS:8623/93. The TPN busbar shall be insulated with colour coaded heat shrinkable sleeve and shall be mounted on suitable size "F" class insulator at an interval not more than 250 mm through out the length of theTPN busbar. The extension links shall not be less than 300mm long supported on suitable size "F" class insulator. omprising of the following:- a) The TPN busbar duly plated copper busbar fitted in cascaded moulding. b) Incoming MCCB 400 Amps 36 kA, 415 volts, FP - 01 Nos c) Otgoing MCCB 250 Amps 25 kA, 415 volts, FP - 03 Nos d) Otgoing MCCB 200 Amps 25 kA, 415 volts, FP - 01 Nos e) Voltage/Ampere/Frequency meter multi functional meter - 01 No f) LED indicator lamp RYB - 01 Set of three

(a) The TPN busbar duly plated copper busbar fitted in cascaded moulding. (b) Incoming MCCB 400 Amps 36 KA, 415 volts, FP - 01 Nos (c) Otgoing MCCB 250 Amps 25 KA, 415 volts, FP - 03 Nos (d) Otgoing MCCB 200 Amps 25 KA, 415 volts, FP - 01 Nos (e) Voltage/Ampere/Frequency meter multi functional meter - 01 No (f) LED indicator lamp RYB - 01 Set of three

All as item No 34 above but comprising with following:- (a) The TPN busbar duly plated copper busbar fitted in cascaded moulding. (b) Incoming MCCB 250 Amps 36KA, 415 volts, FP - 01 Nos (c) Outgoing MCCB 200 Amps 25 KA, 415 volts, FP - 03 Nos (d) Otgoing MCCB 160 Amps 25 KA, 415 volts, FP - 01 Nos (e) Voltage/Ampere/Frequency meter multi functional meter - 01 No (f) LED indicator lamp RYB - 01 Set of three

All as item No 34 above but comprising with following:- (a) The TPN busbar duly plated copper busbar fitted in cascaded moulding. (b) Incoming MCCB 250 Amps 36 KA, 415 volts, FP - 01 Nos (c) Outgoing MCB 63 Amps 25 KA, 415 volts, FP - 08 Nos (e) Voltage/Ampere/Frequency meter multi functional meter - 01 No (f) LED indicator lamp RYB - 01 Set of three

Supply, installation, testing and commissioning out door type busbar panel board made out of 3.15 mm thick MS sheet and MS angle section 40x40x5 mm on PCC 1:2:4 type B-1 platform 40 cm above the ground level and 45 cm below the ground level, frame factory fabricated with front and back openable double door system lockable/openable by Keys having chromium plated 19 mm dia fancy lock, louvers and air vent gasket for natural flow of air “U” type gasket shall be used to make the outer shell completely vermin proof suitable for 3 phase 4 wire 415 Volt, 50 Hz, tested at CPRI for 35 MVA rupturing capacity at 415 Volts factory fabricated having modern fabrication and testing process which includes seven tank pretreatment process comprising of degreasing, rinsing, de-rusting, rinsing, phosphatising and passivation followed by powder coat painting having thickness not less than 100 microns provided with suitable gasket to make it dust/vermin proof and general construction confirming to IS:8623/93. Contd.......

(a) TPN, Aluminium bus bar 400 Amps insulated with colour coded heat shrinkable sleeve and shall be mounted on suitable size “F” class insulators. (b) Incoming MCCB 250 Amps 36 KA, 415 Vots, 50 Hz, FP. – 1 No (c) LED Indicator lamp RYB - 01 set of three. (d) Necessary excavation, earth work, PCC 1:4:8 type D2 and PCC 1:3:6 type C2 using 40 mm graded stone aggregate platform complete all as specified and directed.

M&L Earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI strip 32 x 6 mm as earth strip electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth strip encased in and including 40 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments,20 mm dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS TMT bars 8mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electrical plate No 3 of SSR Part I complete all as specified and directed and testing on completion. Note :- If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department.

Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level surrounded from all sides by 15 cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by mean of GI wire 4 mm dia by means of bolts, nuts check nuts and washers of GI or steel and connecting to earthing test point, main switch board, testing on completion including PCC cover and frame, PCC (1:3:6) type C-2 as in earthing pit, MS funnel with wire mesh GI pipe 20 mm dia light grade for watering and GI pipe 20 mm dia light grade for the protection of GI wire from earth pit to earth point complete including necessary excavation and earth work in any type of soil, returning, filling in approved soil and disposal of surplus soil to a distance n.exc 50 m all as specified as shown in electrical plate No 3 of SSR Part-I. PCC chamber shall be constructed at least one metre away from the earth pit and GI pipe fittings for watering shall be provided up to chamber and cost of the same is deemed to be included in the rate of earthing.

S&F MS Junction Box made of 1.6 mm thick MS sheet of size 250 x 200 x 150 mm complete with front openable hinged cover and locking arrangements with 4 Nos aluminium bas bar 100 Amps, mounted on porcelin insulator including M&L for MCB SP 10Amp, 10 KA-1No, fixed on box in Din rail complete with electrical connection fixed to pole with suitable size FI clamp nut bolts and washer including duly painted with powder coated paint complete including S&F required size and length of copper conductor cable and making connections complete all as specified and directed.

Supply and fixing Verticle TPN DB IP-54 protection 4 way Double door with MCCB FP 100 Amps, 16 KA, 415 Volt AC, 50 Hz,and sheet metal enclosure including MCB DP 40 Amp-06 Nos & isolated neutral Bar Amp complete with existing cableling network including making good disturbed surfaces complete all as specified and directed.

Supply and fixing in repairs wall mounted bus -bar three ph, 8 way , 415 Volts with 4 nos Aluminium Bus bar 200 Amp in sheet metal enclosere of 1.6 mm thick MS sheet with powder coat painted including connecting with existing system and cabling network including making good disturbed surfaces complete all as specified and directed.

Supply & fixing of automatic street light timelite distribution board 40 Amp , 3 pole /230 V digital time switch for automatic switching of street lights based on conforming to IP-54 degree of including mounting bracket, cable glands, openable doors with lock complete all as specified and directed.

S&F in repair flat twin core, 10 sqmm nominal cross sectional area multistranded aluminium conductor cable, over all PVC sheathed, 1100 Volts grade heavy duty cable complete all as specified and directed.

M&L for submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated multistranded copper conductor cable 2x6 sqmm & 1x4 sqmm as earth wire with and including surface PVC conduit of size not less than 20 mm complete all as specified and directed.

Dismantling taking down old cross arms, clamps, braces etc of any section from pole including nuts, bolts, washers complete all as specified and as directed.

Dismantling of GI wire any type and any size complete all as specified and as directed.

Disconnecting, dismantling and taking down carefully ACSR conductor from poles of any size and setting a side complete all as specified and as directed.

Dismantling of insulators any type and any size complete all as specified and as directed.

Dismantling of PCC/Steel Poles any type any size complete all as specified and as directed.

Dismantling of stay assembly any type and any size complete all as specified and as directed.

LUMOS INFRA PVT LTD

Raman Electric Trading Co

impex traders contracts

M/S S.B. Singh and Sons

BRITE INDUSTRIES